Updated Nov 15, 2026· 15 min read

Key takeaways

  • Choose sinks for kitchen remodel projects by mount type, cabinet size, bowl depth and hole count, from dual mount kits that keep a counter to undermount picks.

A remodel sink has to fit decisions that are already half made: a counter that may stay, a cabinet that will not move, and a faucet pattern already drilled or planned. This guide compares sinks for kitchen remodel projects on mount type, cabinet size, bowl depth and hole count, using only fields stated on each maker or listing page.

Quick verdict

For a remodel that keeps the existing counter, the Kraus KHT302-33 dual mount and the Elkay Dayton drop-in are the direct fits in this list. For a remodel that replaces the counter, the Delta Lenta undermount gives the deepest specification, and the two Elkay dual mount kits plus the Blanco Diamond cover smaller cabinets and a color change.

The pattern across the six is flexibility first. Four models can mount from above the counter, and three of those can also undermount, so the sink decision does not have to wait for the counter decision. Cabinet figures, where the maker states them, run from 30 inches for the compact Elkay kit to 36 inches for the full-size models. Bowl depth runs from 6 inches in the shallow ADA-depth models to 9 inches in the full-size bowls, which maps neatly onto remodels that keep an older disposal or lower a bowl for easier reach.

Product Type Best for Key spec Main limit
Kraus KHT302-33 Dual mount, double bowl Retrofit on any counter 33 x 22 x 10.63 inches, 2 holes Page states no cabinet figure
Elkay Lustertone Classic dual mount kit Dual mount, double bowl Equal bowls, drains included Bowls 14.50 x 18.31 x 9 inches No model number on listing page
Elkay Crosstown ECTSRAD25226T Dual mount kit, single bowl Small cabinet, shallow bowl Bowl 22.50 x 16.75 x 6 inches Shallow 6 inch bowl
Blanco Diamond 482497 Dual mount, single bowl composite Color change, second sink 25 x 22 x 10 inches, 1 hole Page states no bowl dimensions
Delta Lenta 953034-32D6-SS Undermount, 60/40 double bowl Counter replacement remodel Left bowl 18 x 17 x 9 inches Undermount only
Elkay Dayton MR2 Drop-in, equal double bowl Counter stays, simple spec 33 x 22 x 6-9/16 inches, 22 gauge Thinnest steel in this list

How we selected

Remodel fit is a different test from new-build fit. Each sink here had to answer at least one remodel question with a field: a dual mount or drop-in fitting for a counter that stays, a shallow bowl for a cabinet that keeps its plumbing low, a compact body for a smaller cabinet, or an undermount kit complete enough for a counter replacement.

Six models made the cut across those answers. Every dimension, gauge, hole count, cabinet figure and included part in this article comes from the page opened for that model. Where a page states fewer fields, the article says so in plain terms, because a remodel plan built on an unstated cabinet figure is how a sink ends up returned to the store of origin in spirit, whatever its paperwork says. Hole counts are treated as remodel fields, not styling, since they decide whether an existing faucet pattern carries over.

Best sinks for kitchen remodel projects, by scope

Scope decides the sink more than taste does in a remodel. A counter that stays points to drop-in and dual mount models, a counter that goes points to undermount kits, and a small or shallow cabinet narrows the field again. The six picks below follow that order, from the most flexible retrofit to the full counter-replacement kit.

Kraus KHT302-33 Standart PRO dual mount sink

Kraus describes the KHT302-33 as a 33 inch dual mount double bowl sink in TRU16 gauge stainless steel, with dimensions of 33 by 22 by 10.63 inches. The installation type is listed as dual mount, the deck carries two pre-drilled holes, and the maker states the design installs as an undermount or a drop-in with any countertop material.

That wording is the remodel case in one line: the same sink fits a laminate counter today as a drop-in and a stone counter later as an undermount. The description lists NoiseDefend sound dampening pads, a satin finish, rounded corners and channel grooves, and states the box holds a protective bottom grid, a drain assembly, a template and mounting hardware, with a decorative drain cover and a kitchen towel in the components field. The page opened for this guide does not state bowl dimensions or a minimum cabinet size, so confirm both on the maker page before the counter is cut.

Pros: 16 gauge steel, two mounting routes, and a grid plus drain assembly listed in the box. Cons: bowl and cabinet figures are not stated on the opened page, and a deck-mounted pattern will not suit a remodel planned around an undermount-only look. Buy if the counter decision is still open. Skip if you need every dimension confirmed on one page today.

Elkay Lustertone Classic double bowl dual mount kit

The listing page for this Elkay Lustertone Classic kit describes an 18 gauge Type 304 stainless steel sink at 33 by 22 inches, with two equal D-shape bowls listed at 14.50 by 18.31 by 9 inches each. The minimum cabinet size is listed at 36 inches, the drains at 3.38 inches toward the rear center, and the finish as Lustrous Satin.

The Slim Rim feature text states the sink installs as a drop-in or undermount, which gives a remodel the same two-route flexibility as the Kraus in a different bowl pattern. The kit includes two LKPD1 Perfect Drains and strainers, an edgeless drain design the maker names Perfect Drain, plus sound-deadening pads and an offset drain position. Equal bowls suit a household that washes and rinses in parallel, and the included drains close a parts gap that many sink-only purchases leave open.

Pros: equal deep bowls, drains and strainers included, and dual mount flexibility. Cons: the listing page prints no model number, and its height fields conflict, so the exact variant needs confirming before ordering. Buy if you want a divided bowl and a complete drain story. Skip if a single open bowl fits your pans better.

Elkay Crosstown ECTSRAD25226T dual mount kit

Elkay lists the ECTSRAD25226T as a Crosstown single bowl kit in 18 gauge Type 304 stainless steel, polished satin, at 25 by 22 by 6 inches. The bowl is listed at 22.50 by 16.75 by 6 inches, the minimum cabinet size at 30 inches, the drain at 3.50 inches toward the rear center, and the deck at four installation holes.

The remodel value here is the combination of a small cabinet figure, a shallow bowl and a Slim Rim that the feature text says installs as a drop-in or undermount. The kit includes the sink and a CTXBG2115 bottom grid, with Sound Guard pads and undercoating and U-Channel mounting clips. The listing carries an ADA compliant certification as listed by the maker, which pairs with the 6 inch bowl depth for a remodel planned around easier reach into the bowl.

Pros: fits a 30 inch cabinet, shallow bowl, dual mount, and a grid in the box. Cons: at 6 inches deep the bowl holds less than the 9 inch bowls here, and the body is 25 inches wide where full-size picks are 33. Buy if your base cabinet is small or reach matters. Skip if you wash tall stock pots daily.

Blanco Diamond dual mount composite sink in Anthracite

The Blanco Diamond 482497 listing describes a composite single bowl sink at 25 by 22 by 10 inches, in Anthracite, with one faucet hole and a dual deck design that the page states can be installed as a drop-in or undermount. The material is listed as 80 percent natural granite, and the maker lists heat resistance to 536 degrees Fahrenheit.

In a remodel, this is the color-change pick: a molded composite body in a dark finish changes the room without changing the mount plan, and the same page describes the model as a fit for a complementary second sink as well as a main sink. The boxed weight is listed at 39 lb. The page opened for this guide does not state bowl dimensions or a minimum cabinet size, so both need confirming on the maker page before a cutout is planned around this model.

Pros: dual mount, a molded granite composite body, and a deep 10 inch body in a compact footprint. Cons: bowl and cabinet figures are not stated on the opened page, and one hole limits the faucet pattern to a single-hole setup with separate accessories planned apart. Buy if color and material lead the remodel. Skip if you need a stated cabinet figure before committing.

Delta Lenta 953034-32D6-SS undermount sink

Delta lists the Lenta 953034-32D6-SS as a 32 inch undermount sink in TRU16 gauge stainless steel with a SatinSheen finish. Outer dimensions are listed at 32 by 19 by 9.5 inches, the left bowl at 18 by 17 by 9 inches, the right bowl at 12 by 17 by 9 inches in a 60/40 split, the minimum cabinet size at 36 inches and the drain opening at 3.88 inches.

This is the counter-replacement pick: undermount only, with a PerfectFit low divider the maker answers put at about 7 inches, a rear-set drain, and a kit that lists the sink, two black silicone bottom grids, two drain assemblies with strainers, mounting hardware and a cut-out template. NoiseDefend pads on all sides and an anti-condensation undercoating are listed, and the maker lists the silicone grid heat resistance to 400 degrees Fahrenheit. In a remodel where the counter is already being replaced, that completeness shortens the parts list to the faucet alone.

Pros: 16 gauge steel, a low divider, two grids and two drain assemblies in the box. Cons: undermount only, so a counter that stays rules it out, and the 60/40 split is fixed with the large bowl on the left as listed. Buy if the counter is being replaced anyway. Skip if your remodel keeps the existing counter.

Elkay Dayton equal double bowl drop-in sink

The listing page for this Elkay Dayton model describes a drop-in sink at 33 by 22 by 6-9/16 inches in satin stainless steel, with two equal bowls in a 50/50 split, drains at 3.5 inches in the center, and two installation holes under the MR2 pattern in the product name. The steel is listed as 22 gauge, 300 Series, and the weight at 8.5 lb.

The feature text makes the remodel case directly: the sink is installed above the countertop, which the maker describes as an ideal choice if you are not replacing the counter, with U-Channel mounting clips placed inside the channel before installation. Sound-deadening pads are listed, and an ADA compliant note is listed as well. The page opened for this guide does not state individual bowl dimensions or a minimum cabinet size, so measure the existing cutout carefully and confirm the cabinet on the maker page.

Pros: a true drop-in that reuses an existing opening pattern, shallow bowls, and a light body for handling during fitting. Cons: 22 gauge is the thinnest steel in this list, and bowl figures are not stated on the opened page. Buy if the counter stays and the spec can stay simple. Skip if dent resistance from thicker steel is a priority.

Buying guide

A remodel adds constraints that a new kitchen does not have, and the buying order changes with them. Measure first, mount second, bowl third, and parts last is the wrong order here; in a remodel the mount and the cabinet gate everything else. The five notes below follow the remodel order, using the figures stated for the six picks in this list.

Decide whether the counter stays or goes

This decision halves the field. If the counter stays, the mount must work from above or offer a drop-in route: the Dayton drop-in, the Kraus dual mount, and the two Elkay Slim Rim kits and the Blanco dual deck all qualify on their fields. If the counter goes, undermount models like the Delta Lenta enter the list and the cutout is made to the sink.

Dual mount models are the hedge. The Kraus, the Lustertone Classic kit, the Crosstown kit and the Blanco each state a drop-in or undermount route, so the sink can be ordered before the counter decision is final. That flexibility is worth real money in schedule terms when a remodel is sequenced around other trades.

Match the cabinet figure to the cabinet you have

Stated minimum cabinet sizes in this list run from 30 inches for the compact Crosstown kit to 36 inches for the full-size models, the Lustertone Classic kit and the Delta Lenta. Three pages opened for this guide state no cabinet figure, for the Kraus, the Blanco and the Dayton, and those gaps have to be closed on the maker page before ordering.

Measure the inside width of the sink base, not the door front. Cabinet frames and side panels eat into the nominal size, and a sink listed at 33 inches wide still needs the mounting room its minimum figure accounts for. The tape measure settles this field faster than any other research step in a remodel.

Use bowl depth as a plumbing and reach field

Depth in this list runs from 6 inches in the Crosstown ADA-depth kit and about 6-9/16 inches in the Dayton, to 9 inches in the Lustertone Classic and Delta bowls and 10 inches in the Blanco body. A shallow bowl leaves more room below for an existing disposal and trap at their current heights, which can keep a remodel out of the plumbing wall.

Depth also sets reach. The two shallow models here carry ADA compliant listings as listed by their makers, pairing a 6 inch class bowl with an easier reach to the bowl floor. A deep bowl holds more and splashes less, but in a remodel for an aging household the shallow field often wins on daily comfort.

Count faucet holes before choosing the faucet

Hole counts here are four on the compact Crosstown kit, two on the Kraus and on the Dayton MR2 pattern, and one on the Blanco Diamond. A deck-mounted faucet pattern has to match those holes or cover them with a plate the maker lists, and an undermount fitting moves the holes to the counter instead, which only a counter replacement allows.

Plan the accessories with the holes. A soap dispenser, a filtered water tap or a sprayer each needs a hole or a counter drilling. In a remodel that keeps the counter, the existing hole pattern is a fixed field, so read it first and let it filter the sink list before bowl shape enters the discussion.

Check what the kit includes for sinks for kitchen remodel timing

Remodel schedules punish missing parts, because a missing drain assembly stalls the plumber visit. The Delta Lenta kit lists two grids and two drain assemblies with strainers, the Lustertone Classic kit lists two Perfect Drains and strainers, the Crosstown kit lists a grid, and the Kraus description lists a grid and a drain assembly.

Read the kit line for the exact model, not the family. Two kits in this list include drains and two center on grids, and the Blanco and Dayton pages list no kit contents at all. A short inventory against the box contents, written down before ordering, is the cheapest schedule protection a remodel can buy.

FAQ

These answers cover the remodel questions that come up most: whether a drop-in can later undermount, how to handle an unstated cabinet figure, whether a shallow bowl is a compromise or a feature, what a low divider changes in a family remodel, and how a second sink fits into a remodel plan without a second full cabinet run.

Can a dual mount sink be changed from drop-in to undermount later?

The makers here state the two routes as installation options for the same body: the Kraus description says the dual mount design installs as an undermount or a drop-in with any countertop material, and the Elkay Slim Rim text says the same. Changing route later means a new counter or a re-cut opening, since the cutout sizes differ by route.

Plan the first fitting for the counter you have and the second for the counter you plan. A dual mount body keeps that sequence possible, which is the practical reason these models suit phased remodels where the counter is a later stage.

What if the cabinet figure is not stated for a sink I like?

Confirm it on the maker page for the exact model before ordering, and treat the field as unknown until then. Three of the six pages opened for this guide state no minimum cabinet size, including the Kraus and the Blanco, yet both are strong remodel picks on their other fields, so the gap is a research task rather than a reason to drop the model.

Do not borrow the figure from a sibling model. The two 25 inch dual mount models in this list differ in depth and contents, and cabinet figures follow the exact body and its mounting hardware. The model number is the unit of truth for every field in a remodel plan.

Is a shallow bowl a compromise or a feature in a remodel?

It depends on what sits below and who stands in front. The Crosstown kit at 6 inches deep and the Dayton at 6-9/16 inches leave more vertical room in the cabinet for existing plumbing and a disposal at current heights, and both pages list ADA compliant notes that pair the shallow bowl with easier reach to the bowl floor.

The compromise is capacity. A 6 inch bowl holds a dinner load but not a tall stock pot standing upright, where the 9 and 10 inch bowls here take both. If the household cooks in tall pots weekly, depth is a feature worth the plumbing work; if reach and existing plumbing lead, shallow is the feature.

What does a low divider change in a family remodel?

The Delta Lenta lists a PerfectFit low divider, and the maker answers put its height at about 7 inches against a 9 inch bowl. Long pans and baking sheets rest across both bowls, while ordinary loads still split between the 18 inch left bowl and the 12 inch right bowl for washing and rinsing in parallel.

The trade is soak depth on one side, the same trade every low divider makes. In a family remodel the divider question is worth settling with the largest pan in the house measured against the stated bowl widths, because that pan will test the divider every week.

Can one of these sinks work as a second sink in a remodel?

The Blanco listing page describes its Diamond model as a fit for a complementary second sink, and its 25 by 22 inch footprint with one faucet hole suits an island or a prep corner where a full 33 inch sink would crowd the run. The compact Crosstown kit, at the same 25 inch width with a stated 30 inch cabinet, answers the same need in steel.

A second sink still needs a cabinet, a drain run and a faucet hole plan. The compact models here state or imply those fields clearly enough to plan around, which is why they appear in a remodel list rather than only in a small-kitchen list.

Conclusion

For most remodels the answer splits by counter: the Kraus dual mount or the Elkay dual mount kits if the counter stays or the decision is open, the Delta Lenta if the counter is being replaced, and the compact Crosstown or Blanco where the cabinet is small. Measure the cabinet, read the mount and hole fields, and the rest follows.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.