Updated Nov 17, 2026· 18 min read

Key takeaways

  • Five water coolers for Ryzen II CPUs with AM3 and AM2+ socket support, compared by radiator size, fan airflow, noise level, and case fit for a careful choice.

Older AM3 and AM2+ boards need a liquid cooler that still ships with the right AMD brackets, and many new coolers no longer list them. The best water coolers for Ryzen II CPUs in this guide list AM3 and AM2+ support in their published specifications, so you can match radiator size, fan airflow, and case fit with care.

Quick verdict on the best water coolers for Ryzen II CPUs

For most AM3 and AM2+ builds, the Cooler Master MasterLiquid 240L Core ARGB White is the simplest pick, with a 240mm radiator, two fans, and a wide AMD socket list. Larger cases suit the 360mm Cooler Master 360L Core ARGB White or the Thermaltake TH360 V2 ARGB Sync Snow Edition.

All five coolers list AM3 and AM2+ in their published socket lists, which is the first filter for this keyword. Each is a closed loop liquid cooler, so there is no filling and no separate pump to mount. The choice comes down to radiator size, fan count, listed airflow and noise, and the space inside the case.

Product Type Best for Key spec Main limit
Cooler Master MasterLiquid 240L Core ARGB White 240mm liquid cooler White builds with AM3 boards Fan airflow 71.93 CFM Tube length not stated
Cooler Master MasterLiquid 360L Core ARGB White 360mm liquid cooler Larger cases with a 360mm mount Radiator 394 x 119.6 x 27.2 mm Needs a 360mm mount
Thermaltake TH360 V2 ARGB Sync Snow Edition 360mm liquid cooler White builds with three fans Fan airflow 57.05 CFM Pump speed not stated
Thermaltake TH240 V2 ARGB Sync Snow Edition 240mm liquid cooler Small to medium cases Fan speed 500-2000 RPM No TDP rating stated
Cooler Master MasterLiquid ML240L V2 RGB 240mm liquid cooler Broad socket coverage Fan airflow 62 CFM Tube length not stated

How we selected

Selection started with the published socket list on each product page, and only coolers that list AM3 and AM2+ made the shortlist. Radiator size, fan count, listed airflow, listed noise, and radiator dimensions then shaped the order, with 240mm and 360mm models chosen over smaller sizes.

The maker pages came first. Cooler Master lists AM5, AM4, AM3+, AM3, AM2+, and AM2 for the 240L Core ARGB White and the 360L Core ARGB White. Thermaltake lists the same AMD sockets for the TH240 V2 ARGB Sync Snow Edition, and the listing page for the TH360 V2 ARGB Sync Snow Edition lists them as well. The MasterLiquid ML240L V2 RGB lists AM2, AM2+, AM3, AM3+, and AM4, which covers the Phenom II era boards at the heart of this keyword.

Coolers that only list AM4 and AM5 were left out. The DeepCool LS520 and LS520 SE were left out for that reason, since the maker lists only AM5 and AM4 for them. Older Thermaltake models sold out on the maker store were also left out, including the TH240 V2 ARGB Sync in black and the TH360 V2 Ultra EX ARGB Sync. The Enermax Liqmax III 240 ARGB was left out because the listing page showed zero units at every listed store. Five products met the bar, which is the minimum for this guide, so the guide is written with five and says so plainly.

A 240mm ARGB cooler with wide AM3 support

The Cooler Master MasterLiquid 240L Core ARGB White pairs a 240mm radiator with two ARGB fans and a socket list that runs from AM2 to AM5, which makes it the most direct pick in this guide for an AM3 or AM2+ board in a case with a 240mm mount and a white finish.

Cooler Master MasterLiquid 240L Core ARGB White

This cooler is for a builder who wants a white 240mm liquid cooler on an older AMD board without hunting for separate brackets. The maker lists AMD AM5, AM4, AM3+, AM3, AM2+, and AM2, plus FM2+, FM2, and FM1, so the Phenom II era sockets are covered in the published list.

The maker describes a new Gen S dual chamber pump, an expanded radiator surface, 120mm ARGB fans, and CryoFuze performance thermal paste. The product number is MLW-D24M-A18PZ-RW, and the exterior color is white. The radiator is aluminum, and the radiator dimensions are 277 x 119.6 x 27.2 mm. The pump dimensions are 81 x 76 x 47 mm, the pump MTTF is more than 70,000 hours, and the pump noise level is 12 dBA at maximum. The pump connector is 3-pin, the pump rated voltage is 12 VDC, and the pump power use is 3.96W.

The fans are 120 x 120 x 25 mm, and the cooler ships with 2 fans. Fan speed is 650-1750 RPM, fan airflow is 71.93 CFM at maximum, fan noise level is 27.2 dBA at maximum, and fan pressure is 1.86 mmH2O at maximum. The fan bearing type is rifle bearing, fan MTTF is more than 160,000 hours, and the fan power connector is 4-pin PWM. The fan rated voltage is 12 VDC and the fan rated current is 0.26A. The maker lists a warranty of 3 years.

The main limits are gaps in the published figures: the maker does not state tube length or pump speed in RPM on the opened page, and the maker does not state a TDP rating there either, so the guide does not assign one.

  • Wide AMD socket list, including AM3, AM3+, AM2+, and AM2.
  • Listed fan airflow of 71.93 CFM at maximum, the highest in this guide.
  • Listed fan noise level of 27.2 dBA at maximum.
  • Radiator dimensions of 277 x 119.6 x 27.2 mm suit common 240mm mounts.
  • Tube length is not stated on the opened page.
  • Pump speed in RPM is not stated on the opened page.

Buy this cooler if the case has a 240mm radiator mount, the board uses AM3 or AM2+, and a white ARGB look fits the build. Skip it if the case has no 240mm mount, if a 360mm radiator is wanted, or if a black finish is wanted instead of white.

A 360mm ARGB cooler for larger cases

The Cooler Master MasterLiquid 360L Core ARGB White takes the same pump and fan design as the 240L Core ARGB White and pairs it with a 360mm radiator and three fans, which suits a larger case with a 360mm mount, an AM3 or AM2+ board, and a white finish.

Cooler Master MasterLiquid 360L Core ARGB White

This cooler is for a builder with a mid tower or full tower case that has a clear 360mm radiator mount and wants the extra radiator surface of a third fan. The maker lists AMD AM5, AM4, AM3+, AM3, AM2+, and AM2, plus FM2+, FM2, and FM1, so the Phenom II era sockets are covered in the same way as the 240mm model.

The product number is MLW-D36M-A18PZ-RW, and the exterior color is white. The radiator is aluminum, and the radiator dimensions are 394 x 119.6 x 27.2 mm. The pump dimensions are 81 x 76 x 47 mm, the pump MTTF is more than 70,000 hours, and the pump noise level is 12 dBA at maximum. The pump connector is 3-pin, the pump rated voltage is 12 VDC, and the pump power use is 3.96W. The maker lists a warranty of 3 years.

The fans are 120 x 120 x 25 mm, and the cooler ships with 3 fans. The fan and pump figures match the 240mm model: fan speed 650-1750 RPM, fan airflow 71.93 CFM at maximum, fan noise level 27.2 dBA at maximum, and fan pressure 1.86 mmH2O at maximum. The fan bearing type is rifle bearing, fan MTTF is more than 160,000 hours, and the fan power connector is 4-pin PWM. The maker describes the same Gen S dual chamber pump and CryoFuze thermal paste as the 240mm model, and the fans are ARGB.

The limits mirror the 240mm model: the maker does not state tube length or pump speed in RPM on the opened page, and the maker does not state a TDP rating there either.

  • Same wide AMD socket list as the 240mm model, including AM3 and AM2+.
  • Radiator dimensions of 394 x 119.6 x 27.2 mm with three fans.
  • Listed fan airflow of 71.93 CFM at maximum per fan.
  • Listed fan noise level of 27.2 dBA at maximum.
  • Needs a case with a clear 360mm radiator mount.
  • Tube length is not stated on the opened page.
  • Pump speed in RPM is not stated on the opened page.

Buy this cooler if the case has a 360mm mount, the board uses AM3 or AM2+, and a third fan and a longer radiator are wanted. Skip it if the case only has a 240mm mount, if tall memory sits near the radiator area, or if a black finish is wanted.

A 360mm cooler with white fans and a mirror cap

The Thermaltake TH360 V2 ARGB Sync Snow Edition pairs three white CT120 ARGB fans with a 360mm radiator and a mirror cap on the pump block, which suits a white build in a medium to large case with a 360mm mount, an AM3 board, and ARGB lighting effects.

Thermaltake TH360 V2 ARGB Sync Snow Edition

This cooler is for a builder who wants a white 360mm liquid cooler with ARGB lighting and a mirror style pump cap on an AM3 or AM2+ board. The listing page lists Intel LGA 2066, 2011, 1700, 1200, 1156, 1155, 1151, and 1150, and AMD AM5, AM4, AM3+, AM3, AM2+, and AM2, so the Phenom II era sockets are covered.

The model number is CL-W365-PL12SW-A, and the color is white. The cooler ships with three fans, and the radiator size is 360mm. The maker describes a new industrial cap with an infinity mirror light design, a rotatable upper cap on the water block, and CT120 ARGB Sync fans that run up to 2000 RPM. The fans use a cable integrated daisy chain design, so up to three fans link with a single PWM cable and a 5V ARGB cable. The radiator is a new slim radiator of 27mm thickness, with a 20mm thickness copper chamber and copper fins, and the water block has a copper base plate.

Fan airflow is 57.05 cubic feet per minute, fan speed is 2000 revolutions per minute at maximum, and noise level is 25.8 decibels adjusted. The tubing length is 460mm. The cooler is suitable for medium to large chassis that fit 360mm AIOs, and for builders who want to control lighting effects through 5V motherboard-controlled software.

The limits are gaps in the opened page: it does not state pump speed, the full radiator dimensions, a TDP rating, or a warranty length, so the guide does not assign any of them here.

  • Socket list includes AM3, AM3+, AM2+, and AM2.
  • Three white fans with listed airflow of 57.05 cubic feet per minute.
  • Listed noise level of 25.8 decibels adjusted, the lowest in this guide.
  • Tubing length of 460mm, with a daisy chain fan design.
  • Pump speed is not stated on the opened page.
  • Full radiator dimensions are not stated on the opened page.
  • Needs a case with a clear 360mm radiator mount.

Buy this cooler if the case has a 360mm mount, the board uses AM3 or AM2+, and a white three-fan ARGB look fits the build. Skip it if the case only has a 240mm mount, if a stated pump speed is wanted, or if a black finish is wanted.

A 240mm white cooler for small to medium cases

The Thermaltake TH240 V2 ARGB Sync Snow Edition pairs two white CT120 ARGB fans with a 240mm radiator and a mirror cap, which suits a small to medium case with a 240mm mount, an AM3 or AM2+ board, a white ARGB look, and a stated pump speed range for the build.

Thermaltake TH240 V2 ARGB Sync Snow Edition

This cooler is for a builder with a small to medium chassis that fits 240mm AIOs and wants a white liquid cooler with ARGB lighting. The maker lists Intel LGA 2066, 2011, 1851, 1700, 1200, 1156, 1155, 1151, and 1150, and AMD AM5, AM4, AM3+, AM3, AM2+, and AM2, so the Phenom II era sockets are covered in the published list.

The part number is CL-W364-PL12SW-A. The maker describes a new industrial cap with an infinity mirror light design, two CT120 ARGB White fans, and a 27mm slim radiator with a thickened 20mm copper chamber. The water block material is copper, the radiator material is aluminum, and the tube length is 460 mm with rubber tube material. The maker says the package includes brackets for Intel and AMD CPU sockets, and the cooler is suitable for small to medium chassis that fit 240mm AIOs.

Pump speed is PWM 1500-3300 RPM, pump rated voltage is 12 V and 5V, and pump power input is 5.16 W and 1.6 W. The pump connector is 2510-4 Pin and 5V ARGB header-3 Pin. Fan dimensions are 120 x 120 x 25 mm, fan speed is PWM 500-2000 RPM, fan noise level is 25.8 dB-A, and fan rated voltage is 12 V and 5V. Maximum air flow is 57.05 CFM, maximum static pressure is 2.23 mm-H2O, and the fan connector is 2510-4 Pin PWM and 5V ARGB header-3 Pin. The fan bearing type is hydraulic bearing, and fan life expectation is 40,000 hrs at 25 degrees Celsius. Radiator dimensions are 276 x 120 x 27 mm.

The maker does not state a TDP rating or a warranty length on the opened page, so the guide does not assign either.

  • Socket list includes AM3, AM3+, AM2+, and AM2.
  • Pump speed of 1500-3300 RPM, stated on the opened page.
  • Fan speed of 500-2000 RPM with airflow of 57.05 CFM.
  • Listed noise level of 25.8 dB-A.
  • Tube length of 460 mm and radiator of 276 x 120 x 27 mm.
  • No TDP rating is stated on the opened page.
  • No warranty length is stated on the opened page.

Buy this cooler if the case has a 240mm mount, the board uses AM3 or AM2+, and a white ARGB look with a stated pump speed range is wanted. Skip it if the case has a 360mm mount, if a black finish is wanted, or if a stated TDP rating is needed before ordering.

A 240mm RGB cooler with a wide socket list

The Cooler Master MasterLiquid ML240L V2 RGB is a 240mm liquid cooler with two RGB fans and one of the widest socket lists in this guide, which suits a darker build on an AM3 or AM2+ board with a 240mm mount, RGB lighting, and a black finish for the build.

Cooler Master MasterLiquid ML240L V2 RGB

This cooler is for a builder who wants a black 240mm liquid cooler with RGB lighting and a socket list that reaches back to AM2. The listing page lists AMD sockets AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, and FM2+, and Intel sockets 1150, 1151, 1155, 1156, 1200, 1700, 2011, 2011-3, 2066, and 1851, so the Phenom II era sockets are covered.

The cooler is a water based closed set with 2 fans, and the radiator size is 240mm. Radiator dimensions are 277 x 119.6 x 27.2 mm. Maximum pump speed is 1,800 RPM, minimum pump speed is 650 RPM, and the fan speed runs from a minimum of 650 RPM to a maximum of 1,800 RPM. Airflow is 62 CFM, maximum loudness is 27 dB, fan diameter is 120 mm, and operating voltage is 12 V. The weight is 1,340 g.

The backlight color is RGB, and RGB control covers ASRock RGB LED, ASUS Aura Sync, Gigabyte RGB Fusion, and MSI Mystic Light. The listed airflow of 62 CFM sits between the Thermaltake models at 57.05 CFM and the Cooler Master Core models at 71.93 CFM, and the radiator dimensions match the 240L Core ARGB White, so the two models fit the same 240mm mounts.

The limits are gaps in the opened page. The opened page does not state tube length, pump MTTF, fan MTTF, a warranty length, or a TDP rating, so the guide does not assign any of them.

  • Socket list includes AM2, AM2+, AM3, AM3+, and AM4.
  • Fan airflow of 62 CFM with a maximum loudness of 27 dB.
  • Fan and pump speed from 650 RPM to 1,800 RPM.
  • Radiator of 277 x 119.6 x 27.2 mm with two 120 mm fans.
  • Tube length is not stated on the opened page.
  • No TDP rating is stated on the opened page.
  • No warranty length is stated on the opened page.

Buy this cooler if the case has a 240mm mount, the board uses AM3 or AM2+, and a black RGB look fits the build. Skip it if a white finish is wanted, if a higher listed airflow is wanted, or if a stated tube length is needed before ordering.

Buying guide for the best water coolers for Ryzen II CPUs

Buying a liquid cooler for an AM3 or AM2+ board is mostly a fitment task, and the socket list is the first thing to check. Radiator size, fan figures, connections, and service access then decide between the models that pass the socket test, so work through them in that order.

Check the socket list before anything else in the best water coolers fpr ryzen ii cpus

The socket list is the one figure that cannot be worked around, since a cooler that does not list AM3 will not mount correctly on an AM3 board. Read the published socket list on the product page and look for AM3, AM3+, AM2+, and AM2 by name, rather than assuming that a cooler for a newer AMD socket will also fit an older board.

All five coolers in this guide list AM3 and AM2+ by name. If a product page only lists AM4 and AM5, leave it out of the shortlist, even if the radiator size and the fan figures look right. If the page lists AM3 but the brackets are not in the box, contact the maker before ordering.

Match the radiator to the case in the best water coolers fpr ryzen ii cpus

Radiator size decides the shortlist almost as fast as the socket list, since a radiator that does not fit the mount cannot be used. Check the case manual for the radiator mounts, then compare the mount with the radiator dimensions stated on the product page, including length, width, and thickness.

The 240mm models in this guide list radiator dimensions of 277 x 119.6 x 27.2 mm for the Cooler Master models and 276 x 120 x 27 mm for the Thermaltake TH240 V2 ARGB Sync Snow Edition. The Cooler Master 360L Core ARGB White lists a radiator of 394 x 119.6 x 27.2 mm, and the Thermaltake TH360 V2 ARGB Sync Snow Edition lists a radiator size of 360mm and a thickness of 27mm.

Read fan airflow and noise together

Fan airflow and fan noise should always be read as a pair, since a high airflow figure means little without the noise figure that goes with it. Look for both figures on the same product page, at the same fan speed range, and compare models on that pair rather than on airflow alone.

In this guide, the Cooler Master Core models list fan airflow of 71.93 CFM at maximum with a fan noise level of 27.2 dBA at maximum, and a fan speed of 650-1750 RPM. The Thermaltake models list fan airflow of 57.05 CFM with a noise level of 25.8 dB-A, and a fan speed of 500-2000 RPM. The MasterLiquid ML240L V2 RGB lists fan airflow of 62 CFM with a maximum loudness of 27 dB, and a fan speed of 650 to 1,800 RPM. The highest airflow in the guide also carries the highest listed maximum noise, while the lowest listed maximum noise goes with the lower airflow.

Plan the pump and fan connections

Connections are easy to overlook, and a cooler with the right socket and the right radiator can still be awkward to wire if the board lacks the headers it needs. Count the headers on the board before ordering, and match them with the connectors listed on the product page.

The Cooler Master Core models list a 3-pin pump connector and a 4-pin PWM fan connector, with a pump rated voltage of 12 VDC and a fan rated voltage of 12 VDC. The Thermaltake TH240 V2 ARGB Sync Snow Edition lists a 2510-4 Pin pump connector with a 5V ARGB header-3 Pin, and a 2510-4 Pin PWM fan connector with a 5V ARGB header-3 Pin, so the ARGB lighting needs a 5V addressable RGB header on the board. The MasterLiquid ML240L V2 RGB lists RGB control through ASRock RGB LED, ASUS Aura Sync, Gigabyte RGB Fusion, and MSI Mystic Light.

Leave room for service and cleaning

A liquid cooler is a closed loop, so there is no filling or draining in normal use, but the radiator and the fans still need access for cleaning. Choose a mount that leaves the radiator face and the fan hubs reachable without removing the graphics card or the memory, since dust will collect on the radiator fins over time.

Front mounts are often easier to reach for cleaning than top mounts. Either way, leave a clear path for air to reach the radiator, and do not block the intake with a solid panel or a stack of cables. Keep the box and the spare brackets, since a cooler that moves to a newer board later will need the right brackets for that socket.

FAQ about the best water coolers for Ryzen II CPUs

These questions cover the points that cause the most confusion for this keyword, from what Ryzen II means here to how the AM3 socket list works in practice. Each answer stays with the published specifications and the general fitment rules in the buying guide above.

What does Ryzen II mean in this guide

In this guide, Ryzen II refers to the Phenom II era of AMD processors on AM2+ and AM3 sockets, which is the sense of the keyword as given. It does not refer to a newer Ryzen generation, and the coolers were chosen because their published socket lists include AM3 and AM2+.

Will an AM4 cooler fit an AM3 board

Do not assume that an AM4 cooler will fit an AM3 board, since the mounting hardware differs between the sockets and the maker lists them separately. Only use a cooler whose published socket list includes AM3 or AM2+ by name, and check that the AM3 brackets are in the box before fitting.

Is a 240mm radiator enough for a Phenom II build

A 240mm radiator is a common choice for a Phenom II build, but the answer depends on the chip, the case airflow, and the fan settings, so the guide does not give a single yes or no. The listed fan airflow and noise figures are the useful comparison, since they show what each cooler moves through its radiator at its listed fan speed.

Can a 360mm radiator fit in any case

No, a 360mm radiator cannot fit in any case, since it needs a mount that matches its length and a clear path for the fans. Check the case manual for the radiator mounts, then compare the mount with the radiator dimensions on the product page, including the thickness of 27mm or 27.2 mm where stated.

What if the AM3 brackets are missing from the box

If the AM3 brackets are missing from the box, stop the install and contact the maker or the seller, since the cooler should not be mounted with brackets from another socket. The parts list in the manual shows what should be in the box, and the maker can say which bracket set fits the model and the socket.

Conclusion

For most AM3 and AM2+ builds, the Cooler Master MasterLiquid 240L Core ARGB White is the pick, with a 240mm radiator, two fans, and the widest useful socket list. Larger cases suit the 360mm Cooler Master or Thermaltake models, and the ML240L V2 RGB suits a black build with the same AM3 fit and RGB lighting.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.