Updated Nov 16, 2026· 14 min read

Key takeaways

  • Compare six bathroom exhaust fans for a smoker's bathroom on CFM, sones, room size, and install style, from quiet LED models to a humidity-sensing pick here.

A bathroom used by a smoker needs air that leaves the house, not air that circulates in the room. That is what ventilation for bathroom for smokers means in practice: a ducted exhaust fan moving air outdoors. The six fans below are compared on airflow, noise, room size, and install style, one fan at a time.

Quick verdict

Six ducted exhaust fans cover the range a bathroom needs. The Broan AE80LK Flex is the quiet pick at 0.7 sones, the Panasonic Whisper Choice adds a humidity sensor and selectable airflow, and the Broan BE8, Delta SLM70, Broan AE110LK, and Amico cover the plain-fan ground.

For a small bathroom, the two 80 CFM Broan models and the 70 CFM Delta are sized right, and the AE80LK does it at the lowest noise figure here. For a larger room, the AE110LK and the Amico move 110 CFM, and the Panasonic lets the installer choose 80 or 110 CFM on one unit. Every fan here exhausts through a duct to outdoors, which is the point for a smoker: air leaves the house instead of drifting into the hall.

Product Airflow Noise Room size Light or sensor Main limit
Broan Roomside Series BE8 80 CFM 1.5 sones Up to 75 sq. ft. None, fan only No light or sensor on this trim
Delta Breez Slim SLM70 70 CFM 2.0 sones Not printed on the page None Loudest figure in this group
Panasonic Whisper Choice DC RG-C811LHA 80 or 110 CFM, selectable Not printed on the maker page Set by the CFM chosen LED light and humidity sensor Nightlight must be wired separately
Broan-NuTone AE80LK Flex 80 CFM 0.7 sones Up to 75 sq. ft. LED light Single speed only
Broan-NuTone AE110LK Flex 110 CFM 1.0 sones Up to 105 sq. ft. LED light Larger housing than the 80 CFM Flex
Amico Bathroom Exhaust Fan PAC-00208X20 110 CFM 1.0 sones Not printed on the page None Its page prints two different wattage figures

How we selected

Every fan here was read on its own product page, and only printed specs are compared: the CFM rating, the sone rating where the maker prints one, the room size the maker assigns, and the installation method described on the page itself, in the maker’s own terms.

One point needs stating plainly. None of these fans is sold as a smoke-removal device, and no opened page promises to remove cigarette smoke. They are bathroom exhaust fans, built to move moist air outdoors, and a smoker benefits from the same duct path: air that carries smoke is drawn out of the room instead of settling in it. Where a maker page mentions odors, the wording is the maker’s and is credited as such in the entries below. Two further models were left out on availability grounds: a Delta humidity-sensing fan whose listing showed out of stock, and a Panasonic ceiling fan whose listings showed no current offers.

Ventilation for bathroom for smokers: six fans in detail

The fans are ordered from the plainest ducted units to the feature models, so a reader who wants a simple swap can stop early. Each entry states who the fan suits, the specs its product page prints, and the limit that matters most before it is ordered.

Broan Roomside Series BE8 Bathroom Exhaust Fan

The BE8 is the plain fan in the Roomside series: no light, no sensor, just an 80 CFM exhaust that fits from below the ceiling. It suits a replacement job in a bathroom up to 75 square feet where the old fan is being swapped and no attic access exists.

The listing states that the fan moves up to 80 CFM and runs at 1.5 sones, with Energy Star and HVI certification. The no-cut Roomside design mounts from below, so attic access and drywall removal are skipped, and the EZDuct Connector forms an airtight seal with a 4-inch duct. The housing is galvanized steel with a polymeric grille held by a SlideClip design, measures 9.75 by 9.75 by 5.75 inches, and needs a ceiling cutout of 7.25 by 7.5 inches. It runs on 110-120 volts, weighs 6.5 pounds, and carries a cULus listing for use over showers and tubs on a GFCI-protected circuit. Sibling trims on the same page add a light, humidity sensing, or both.

  • Pros: no-cut install from below; small ceiling cutout; lightest fan here at 6.5 pounds; wet-location listing on a GFCI circuit
  • Cons: fan only, with no light or sensor; 1.5 sones is mid-pack rather than quiet

Buy it for a straightforward like-for-like swap in a small bathroom. Skip it if a light or automatic humidity control is wanted in the same unit.

Delta Breez Slim Series 70 CFM Bathroom Exhaust Fan SLM70

The SLM70 is the slim, flexible mount of the group: the maker lists it for a wall or a ceiling, which suits bathrooms where the ceiling position is awkward. At 70 CFM it is aimed at small bathrooms and powder rooms rather than large ensuite bathrooms.

The product page states that the fan is powered by a DC brushless motor, and the maker claims that design cuts the power used and the noise level compared with other bathroom fans. The printed noise figure is 2.0 sones, and the page describes Soft Start technology, which ramps the motor to top speed gradually and, in the maker’s words, reduces the fan’s wear. The fan is ENERGY STAR qualified. The page does not assign a room size to this model, so the 70 CFM rating is the figure to match against the bathroom.

  • Pros: wall or ceiling mounting; DC brushless motor; Soft Start ramp; ENERGY STAR qualified
  • Cons: 2.0 sones is the loudest rating here; no room size printed on the page; no light

Buy it when a wall mount or a slim housing solves the install. Skip it if quiet running is the first priority, since two Broan models print far lower sone figures.

Panasonic Whisper Choice DC Ventilation Fan RG-C811LHA

This is the feature model: a fan and light with a built-in humidity sensor and a selector that sets airflow to 80 or 110 CFM. It suits a bathroom that needs one unit to handle daily showers on its own and heavier air changes when the room is used for smoking.

The maker page states that the humidity sensor automatically activates the fan when moisture levels rise, and that the Pick-A-Flow selector chooses between 80 and 110 CFM with a flip of a switch. The light is a 10W dimmable LED chip panel with a nightlight of less than 1W, and the maker notes the nightlight must be wired separately. Installation uses the Flex-Z Fast bracket for roomside fitting from below the ceiling. The maker describes the fan as helping to reduce humidity and odors while delivering airflow, lists UL approval for tub and shower enclosures when GFCI protected, and states ENERGY STAR certification. The maker page does not print a sone rating for this model.

  • Pros: selectable 80 or 110 CFM; humidity sensor runs the fan on its own; dimmable LED panel; roomside bracket install
  • Cons: no sone figure printed by the maker; the nightlight needs separate wiring; the most complex install here

Buy it if automatic running and a built-in light are worth the extra wiring. Skip it if a printed noise rating is required before buying, since the maker page leaves that field blank.

Broan-NuTone AE80LK Flex Bathroom Exhaust Fan with LED Light

The AE80LK is the quiet pick of the group, printing 0.7 sones at 80 CFM, and it pairs that with an LED light in the grille. It suits a bathroom up to 75 square feet where the fan will run during and after use and low noise matters every time the fan runs.

The listing gives 80 CFM and 0.7 sones, a housing of 9.25 by 10 by 5.75 inches, a 4-inch duct connector with damper, 23.4 watts, and 120 volts. The Flex design is built for retrofit and replacement from the room side, with FoldAway mounting ears, an EzDuct connector, and a SnapFit Flange Kit for spaces with no attic access. The grille is the maker’s LED CleanCover design, which the maker says clears the air with a low profile. The fan is ENERGY STAR Certified, HVI-2100 certified, UL listed for use over tubs and showers on a GFCI circuit, and backed by a 3-year limited warranty.

  • Pros: quietest rating here at 0.7 sones; LED light included; roomside retrofit design; 3-year warranty
  • Cons: single speed; sized for rooms up to 75 square feet; the light is a fixed integrated module

Buy it for a small bathroom where the fan runs often and quietly. Skip it for a larger room, where the 110 CFM sibling below is the better match.

Broan-NuTone AE110LK Flex Bathroom Exhaust Fan with LED Light

The AE110LK is the larger Flex model: 110 CFM at 1.0 sones, with the same LED CleanCover grille and roomside design as its 80 CFM sibling. It suits bathrooms up to 105 square feet, where the smaller fans would be working at the very edge of their rating.

The listing gives 110 CFM, 1 sone, 23.4 watts, 120 volts, and overall dimensions of 12.25 by 12.25 by 5.75 inches. It is ENERGY STAR certified, installs from the room side, and the included components are a non-metallic damper and duct connector plus the integrated LED module. The warranty runs 3 years. Like the smaller Flex, it is a single-speed fan: the switch runs it at full airflow, and there is no lower setting for quiet background running.

  • Pros: 110 CFM for rooms up to 105 square feet; still only 1.0 sones; LED light included; 3-year warranty
  • Cons: larger housing needs a larger ceiling opening; single speed; no sensor

Buy it for a mid-size or large bathroom that needs the higher airflow with a light included. Skip it if automatic humidity control is wanted, since this line leaves sensing to the switch.

Amico Bathroom Exhaust Fan 110 CFM PAC-00208X20

The Amico is the compact high-airflow option: 110 CFM at 1 sone in a 9 by 9 inch housing, the smallest box here for that airflow. It suits a tight ceiling space where a larger 110 CFM housing will not fit at all and no light is needed in the fan itself.

The listing gives 110 CFM, 1 sone, 120 volts, a metal and polycarbonate build, ETL and FCC certification, a weight of 6.39 pounds, and a 3-year warranty. The housing measures 9.0 by 9.0 inches with item dimensions of 9 by 9 by 5.7 inches, and the ceiling opening is 9.4 by 9.4 inches. The title states no attic access is needed for fitting. One caution from the page itself: its spec table and its comparison chart print two different wattage figures for this model, so wattage is left out of this entry until the maker settles the number.

  • Pros: 110 CFM in a compact 9-inch housing; 1 sone; ETL and FCC certified; 3-year warranty
  • Cons: no light; the page conflicts on wattage; room size is not printed on the page

Buy it when ceiling space is tight and 110 CFM is still required. Skip it if a light in the unit or a printed room-size rating is part of the brief.

Buying guide

Fan choice reduces to four numbers and one route: the CFM rating, the room it must serve, the sone figure, the housing size, and a duct that actually reaches outdoors. The notes below take each in turn, using only the figures the makers print for the fans above.

Airflow first: match CFM to the room

Two makers here tie airflow to room size directly: 80 CFM is assigned to bathrooms up to 75 square feet, and 110 CFM to rooms up to 105 square feet. Those pairings are the working rule for this group, and they are printed by the makers rather than borrowed from a generic chart.

For a smoker’s bathroom, err toward the higher rating when the room sits between sizes. The fan’s job is to change the room air through the duct, and a fan at the top of its range clears a room more slowly than one with headroom. The Panasonic selector exists for exactly this case, letting one unit be set at 80 or 110 CFM.

Noise in sones decides whether the fan gets used

The printed figures here run from 0.7 sones for the AE80LK to 2.0 sones for the Delta SLM70, with the two 110 CFM fans at 1.0 sones. A fan that sounds intrusive gets switched off early, and a fan that is switched off moves no air at all, so the sone figure is a practical spec, not a luxury.

The Panasonic page prints no sone rating, which is worth knowing before it is chosen on features alone. Every other fan here states its figure on the page, and the gap between 0.7 and 2.0 sones is wide enough to hear in a small tiled room.

Roomside fitting versus attic access

Four of these six fans are designed to be fitted from inside the room. The Broan BE8 uses a no-cut Roomside design, the two Flex models fold their mounting ears for room-side work, the Panasonic uses a bracket made for fitting from below, and the Amico title states no attic access is needed.

That matters in houses where the bathroom ceiling has no loft above it, or where the old fan is being replaced and the ceiling is staying closed. A roomside design turns the job into a swap at the ceiling opening rather than work from above, and the cutout sizes printed for each fan tell whether the existing hole can be reused.

Lights and sensors as working extras

Three fans here carry an LED light in the unit: the Panasonic and the two Broan Flex models. A combined unit saves a separate light fitting over a shower, and the Panasonic adds a low-power nightlight, though the maker notes that part must be wired separately.

The humidity sensor is the other working extra, and only the Panasonic has it. It switches the fan on when moisture rises, which suits a household that forgets the switch, though it answers moisture rather than smoke: for a smoking session the fan still needs to be switched on by hand.

Duct and electrical checks before fitting

The Broan BE8 and AE80LK both print a 4-inch duct connector, and every fan here only works as ventilation if that duct runs to outdoors. A fan screwed to a ceiling with no duct path, or a duct that ends in the attic, moves air from one enclosed space to another and solves nothing for smoke or steam.

On the electrical side, the wet-location listings here depend on a GFCI-protected circuit for fans placed over tubs and showers, as both Broan and Panasonic state. The Panasonic nightlight needs its own wiring run, and the Flex models and the BE8 run on standard household voltage as printed on their pages.

FAQ

These answers stay with what the product pages print and with how a ducted exhaust fan behaves in a bathroom. Where no maker states a claim, the answer says so, because the gap between moving air and removing smoke is the point most often blurred in fan marketing.

Does a bathroom fan remove cigarette smoke?

No fan here is sold with that promise, and no opened page makes it. What a ducted exhaust fan does is move room air outdoors, so smoke produced in the bathroom is drawn toward the grille and out of the house instead of drifting under the door into the rest of the home.

Panasonic’s page goes as far as saying its fan helps reduce humidity and odors, and that wording is the maker’s. Odor that has settled into towels, paint, and grout is a cleaning matter. The fan handles the air; it does not treat surfaces, and it does not filter anything on the way out.

How much ventilation for bathroom for smokers is enough?

Use the pairings the makers print: 80 CFM for bathrooms up to 75 square feet, and 110 CFM for rooms up to 105 square feet. A small ensuite is covered by the 80 CFM fans here, while a family bathroom at the larger end needs one of the 110 CFM models to match its rating.

Running time matters as much as rating. A fan only changes the air while it runs, so it should be on while the bathroom is in use and left on afterward until the air in the room has turned over. The humidity-sensing Panasonic automates that habit for showers, though it still needs a manual switch for smoke.

Can a fan be fitted without attic access?

Yes, and most of this group is built for it. The Broan BE8 is a no-cut Roomside design fitted from below, the Flex models are made for room-side retrofit with folding mounting ears, the Panasonic bracket is designed for installation from below the ceiling, and the Amico states no attic access is needed.

The check is the ceiling opening. The BE8 needs a cutout of 7.25 by 7.5 inches and the Amico needs 9.4 by 9.4 inches, so measure the existing hole before choosing. A roomside fan still needs its duct connected, which is the part of the job that decides whether the fitting stays simple.

What does the humidity sensor add?

On the Panasonic, the sensor activates the fan automatically when moisture levels rise, so showers are vented even when nobody touches the switch. It is a convenience for steam, and the maker pairs it with the selectable 80 or 110 CFM airflow on the same unit.

It does not sense smoke. No fan in this group prints a smoke or particle sensor, so for a bathroom used for smoking, the routine stays manual: switch the fan on, and let it run. The sensor simply removes one chore from the shower side of the room’s life.

Is a fan with a light better for a smoker’s bathroom?

The light changes nothing about airflow. The Panasonic and the two Flex models move the same air as their fan-only counterparts would at the same CFM, and the LED panel is there to serve the room, not the ventilation. Choose it for the room’s lighting plan, not for smoke.

Where the combination does help is placement. A fan-light over a shower area, on a GFCI circuit as the listings require, puts the exhaust point where steam and smoke gather, in the middle of the room rather than at its edge, and one ceiling opening does both jobs.

Conclusion

Match the fan to the room, then to the fitting. The AE80LK is the quiet pick for small bathrooms, the AE110LK and Amico cover larger rooms at 110 CFM, the Panasonic adds a sensor and selectable airflow, the BE8 is the plain swap, and the Delta suits a wall mount. Run any of them on a real duct to outdoors, and the bathroom air leaves the house.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.