Key takeaways
- Six box mod kits compared for ex smokers on battery format, wattage range, tank size and coil options, using only the full specs printed on each maker page.
An ex smoker shopping for a box mod faces pages of near-identical kits, and the differences that matter sit in battery format, output range and tank size. This guide compares six kits sold as a vape mod for ex smokers on the specs each maker prints, so the choice rests on hardware facts rather than packaging claims or starter-kit labels.
Quick verdict
The six kits split into two camps. Three run on a single 18650 cell and top out between 80W and 100W, and three run on dual 18650 cells with ceilings of 200W or 230W. Every kit pairs the mod with a refillable tank, a printed coil family and USB-C charging, and none of them includes the batteries.
Readers who want the smallest footprint should start with the Innokin Coolfire Z80 Nex and the Vaporesso GEN 80 S, the two 80W single-cell kits in the list. Readers who want a large screen and a wide output range should look at the SMOK G-Priv 4, which pairs a 2-inch touchscreen with a 230W ceiling, and the Lost Vape Thelema Q200 Pro, which adds a 1.47 inch display and interchangeable battery covers. The Geekvape L200 is the only kit here with a printed IP68 rating, and the Lost Vape Centaurus M100 is the lightest dual-purpose pick, built around a single cell and an aluminium body the maker lists at just over 100g.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Geekvape L200 (Aegis Legend 2) 200W Kit | Dual-cell box mod kit | Readers who want a printed IP68 rating | 5-200W, Z 2021 tank 5.5mL | Batteries not included |
| Lost Vape Thelema Q200 Pro Kit | Dual-cell box mod kit | Readers who want themes and a big display | 5-200W, 1.47 inch TFT, 9 UI themes | Heaviest format here at 150g for the mod |
| Lost Vape Centaurus M100 Kit | Single-cell box mod kit | Readers who want a light metal body | 5-100W, aluminium body just over 100g | Single cell limits total output |
| Innokin Coolfire Z80 Nex Kit | Single-cell box mod kit | Readers who want MTL and RDL coils in one box | 6-80W, Zenith Nex tank 5ml | Lowest output ceiling in the list |
| SMOK G-Priv 4 Kit | Dual-cell touchscreen kit | Readers who want a touchscreen and TC modes | 5-230W VW, 2-inch color touchscreen | Touchscreen draws more power than a plain display |
| Vaporesso GEN 80 S Kit (iTank 2) | Single-cell box mod kit | Readers who want a compact AXON kit | 5-80W, iTank 2 with press-and-open filling | Maker page prints no kit dimensions |
How we selected
Each kit in this guide was read on an opened maker or listing page, and only the figures printed on that page are used here: output range, battery format, tank capacity, coil resistances with their printed wattage bands, display size, charging spec and body materials. Where a page printed no figure, the guide says so instead of filling the gap.
The list was also kept separate from earlier mod roundups on this site, so none of the six kits repeats a pick from those guides. Two models were left out on purpose. The VOOPOO Drag 4 was dropped after a comparison article reported that Voopoo has discontinued it, and the Freemax Maxus Solo 100W was dropped because kit-level stock could not be confirmed on an opened page. No page opened for this guide markets a mod by the words ex smokers, so the picks rest on hardware specs that any reader can compare line by line.
The six picks for a vape mod for ex smokers
The six kits below are ordered from the dual-cell flagships down to the compact single-cell kits. Each entry gives the printed specs first, then the limits a buyer should weigh, then a plain buy-if and skip-if line so the trade-offs stay visible without any hands-on claims.
Geekvape L200 (Aegis Legend 2) 200W Kit
The L200 is a dual 18650 kit with a printed output range of 5 to 200W, a maximum voltage of 12V and a resistance range of 0.1 to 3.0 ohm. The listing page prints an IP68 rating, a zinc-alloy chassis and kit dimensions of 140.05mm by 54.12mm by 29mm, with the batteries sold separately.
The tank is the Geekvape Z 2021, a 26mm tank with 5.5mL of bubble glass capacity, or 2mL in the TPD version. The box coils are a Z 0.2 ohm coil printed for 70 to 80W and a Z 0.25 ohm dual coil printed for 45 to 57W, and the page also lists support for Z 0.15 and Z 0.4 coils. A 1.08 inch TFT color display sits above a Type-C port hidden behind a flip cover, and an A-Lock switch locks the firing button. The battery door is hinged at the bottom. The maker lists a working temperature range of 0 to 45 degrees C and eleven colors, from Black and Grey to Rainbow Purple and Pink Gold. The mod is also sold on its own as the L200 Box Mod for readers who already own a tank.
Pros: the widest printed coil support in this list, a printed IP68 rating, and a physical lock switch. Cons: dual cells are required and not included, and the kit is one of the larger bodies here. Buy if you want a dual-cell kit with a printed sealing rating and a broad coil family. Skip if you want a single-cell kit that disappears in a pocket.
Lost Vape Thelema Q200 Pro Kit
The Thelema Q200 Pro is a dual 18650 kit printing 5 to 200W of output, a battery voltage range of 6.0V to 8.4V and coil support from 0.1 to 3.0 ohm. The mod measures 28mm by 57mm by 92mm, weighs 150g plus or minus 5g, and charges over Type-C at 5V and 2A as printed.
A 1.47 inch TFT display carries nine UI themes, and the maker lists a Quest X 3.0 chip with six vaping modes. The body mixes zinc-alloy with PU leather, and the battery covers are interchangeable, so the look can change without changing the mod. Pressing the fire button three times opens modes, themes and settings and also works as the power lock. The tank is the Centaurus Sub Ohm V2 at 5mL, with a 3mL spare glass in the box, glass tube and stainless steel construction, top fill and top airflow. It takes UB Max coils in 0.15, 0.2 and 0.3 ohm, and the box holds a 0.15 ohm UB Max X1 V2 and a 0.3 ohm UB Max X3 V2. Six colorways are listed, including Dark Guardian, Desert Defender and Armor Knight.
Pros: the largest display here after the G-Priv 4, swappable covers, and a spare glass in the box. Cons: at 150g before cells and liquid it is the heaviest mod in this list, and the theme system adds menus some readers will never open. Buy if you like a big screen and changeable covers. Skip if weight matters more than display size.
Lost Vape Centaurus M100 Kit
The Centaurus M100 is the single-cell entry from the same maker, printing 5 to 100W of adjustable output from one 18650 battery that is not included. A 0.96 inch OLED screen, a Quest 2.0 chipset and temperature control for nickel, titanium and stainless steel are the printed control specs.
The body is aircraft-grade aluminium and the listing puts it at just over 100g, which makes it the lightest mod in this guide. A 3-in-1 jog dial wraps around the fire button, a sliding switch handles power, and the battery door is magnetic. The Centaurus Sub-Ohm Tank fills through a quarter-turn top-fill cap and uses stepless airflow control, so the draw is set by turning the ring rather than by clicking through fixed steps. The box coils are a 0.2 ohm UB Max X2 and a 0.3 ohm UB Max X3, the same UB Max family as the Q200 Pro tank, and charging is over USB-C. Readers who own UB Max coils for another Lost Vape tank can carry the spares across.
Pros: light aluminium body, one shared coil family with the Q200 Pro, and a jog dial that keeps settings off the touchscreen. Cons: a single cell caps output at 100W and means more frequent cell swaps at high settings. Buy if you want Lost Vape hardware in a lighter, single-cell body. Skip if you run coils near the top of the UB Max printed bands all day.
Innokin Coolfire Z80 Nex Kit
The Coolfire Z80 Nex prints the lowest output range in this list, 6 to 80W from a single external 18650 battery that is not included. The kit measures 58.33 by 27.56 by 134.82 mm, charges over USB-C at 5V and 2A, and carries a 0.96 inch TFT color screen on a zinc alloy, PCTG and leather body.
The Zenith Nex Tank holds 5ml, fills from the top and adjusts airflow at the top of the tank. It runs the Innokin Z Coil Series, and the box is the most complete here for draw styles: a pre-installed Z Coil 0.8 ohm MTL coil with an MTL mouthpiece, a spare Z Coil 0.3 ohm RDL coil with an RDL mouthpiece, a spare glass and O-rings. A manual lock switch sits on the body, and the connection is a standard 510 thread. Six colors are printed: Black, Gradient Blue, Silver, Gunmetal, Turquoise and Purple. For an ex smoker who has not settled on a draw style, the two printed coil and mouthpiece pairs let the same kit cover a tight mouth-to-lung draw and a looser restricted draw without a second purchase.
Pros: both an MTL and an RDL coil in the box, a manual lock switch, and the longest printed kit body here for readers with larger hands. Cons: the 80W ceiling is the joint lowest in the list, and there is no printed temperature control suite. Buy if you want one kit that covers two draw styles out of the box. Skip if you plan to run high-wattage sub-ohm coils.
SMOK G-Priv 4 Kit
The G-Priv 4 is the touchscreen entry, printing an IQ-M chipset, dual 18650 batteries that are not included, and output of 5 to 230W in variable wattage mode or 10 to 230W in temperature control. The printed resistance range is 0.1 to 2.5 ohm in VW and 0.05 to 2 ohm in TC.
The 2-inch color touchscreen is the largest display in this guide, and the modes printed are VW, TC for nickel, titanium and stainless steel, and TCR. The temperature range prints as 200 to 600 degrees F, or 100 to 315 degrees C. The chassis is zinc-alloy with a leather grip, the connection is 510, and charging is over a Type-C cable. The TFV18 Mini Tank measures 28mm and holds 6.5mL, the largest printed capacity here, with a 2mL TPD version also listed. Its coils are the V18 Mini 0.33 ohm Mesh, printed for 80 to 140W with a best band of 100 to 110W, and the V18 Mini 0.15 ohm Dual Mesh printed for 80 to 110W. Airflow adjusts through a bottom tri-slot ring, and the top fill locks with a push button. Six colors are listed, from Black and Grey to Beige White and Brown.
Pros: the biggest screen and the biggest tank in the list, plus the highest printed output ceiling. Cons: the coil printed bands start at 80W, so this kit is aimed at direct-lung use, and a touchscreen is one more surface to keep clean. Buy if you want a large display and high printed output. Skip if you prefer a tight mouth-to-lung draw.
Vaporesso GEN 80 S Kit (iTank 2)
The GEN 80 S is Vaporesso’s single-cell entry, and the maker page prints 5 to 80W of output from one 18650 battery that is not included. Charging is DC 5V and 2A over Type-C, the display is a 0.96 inch TFT screen, and the chip is the maker’s AXON CHIP.
The iTank 2 holds 5ml, or 2ml in the TPD version, and the maker lists a Turbo Airflow System and a Liquid Self Cleaning System, with a press-and-auto-open filling design at the top. The printed coils are the GTi 0.2 ohm MESH coil for 60 to 75W and the GTi 0.4 ohm MESH coil for 50 to 60W, the same GTi family used across the maker’s larger kits. The maker page does not print kit dimensions for the GEN 80 S, so no size figure is given here; readers comparing pocket fit should read the dimensions on the listing page before ordering. Within this list it is the natural counterpart to the Coolfire Z80 Nex: the same 80W ceiling and single cell, but with printed coil bands that start at 50W rather than with an MTL coil in the box.
Pros: a compact single-cell format, printed GTi coil bands in the mid range, and a self-opening fill cap design. Cons: no MTL coil is printed for the kit, and the maker page gives no dimensions. Buy if you want an 80W kit built around mid-wattage mesh coils. Skip if you want a printed mouth-to-lung coil in the box.
Buying guide
Four printed figures separate these six kits more than any branding does: the number of cells, the output ceiling, the tank capacity and the coil bands printed for the box coils. Reading those four lines on any mod listing gives a buyer the shape of the kit before any color or screen theme enters the decision.
Battery format and cell count
Three of these kits run on a single 18650 cell and three on a pair, and none of the six includes the cells in the box. A single-cell kit is smaller and lighter, while a dual-cell kit spreads the same work across two cells and prints a higher output ceiling on the maker page.
Cells are a separate purchase with their own printed ratings, and a dual-cell kit needs a matched pair that is charged and swapped together. Readers who already own 18650 cells for another device can reuse them in any kit here, since all six print the same 18650 format. Charging is over USB-C on every kit in the list, at printed rates from 5V and 1A equivalents up to 5V and 2A, and the L200 hides its port behind a flip cover while the others leave the port exposed.
Wattage range and output modes
The printed ceilings run from 80W on the two compact kits to 230W on the G-Priv 4, and the floor matters as much as the ceiling for a reader who runs low-power coils. The Coolfire Z80 Nex prints a 6W floor and the GEN 80 S a 5W floor, while the G-Priv 4 prints 5W in VW mode and 10W in TC mode.
Modes differ by brand. The Thelema Q200 Pro prints six vaping modes on a Quest X 3.0 chip, the Centaurus M100 prints temperature control for three wire types on a Quest 2.0 chip, and the G-Priv 4 prints VW, TC and TCR. A reader who never uses temperature control loses nothing by choosing a kit without it, and a reader who builds with nickel, titanium or stainless steel wire should confirm the wire type is printed on the kit page before ordering.
Tank capacity and coil families
Printed tank capacities run from 5mL on the Thelema, Centaurus M100, Z80 Nex and GEN 80 S tanks to 6.5mL on the G-Priv 4, with the L200 at 5.5mL. Every maker also prints a 2mL TPD version of its tank, so the capacity on the box depends on the region the kit is sold in.
Coil families are the ongoing cost and the ongoing errand. The two Lost Vape kits share the UB Max family, the two Geekvape-style Z coils appear only in the L200 here, Innokin uses its Z Coil Series, SMOK uses the V18 Mini line and Vaporesso uses GTi coils. A coil family with several printed resistances gives more room to change draw and output later; the L200 page lists four Z coil options, while the G-Priv 4 page lists two V18 Mini coils with high printed bands.
Screens, locks and charging
Display sizes run from 0.96 inch on the Centaurus M100, Z80 Nex and GEN 80 S to 2.4 times that on the G-Priv 4 touchscreen, with the Thelema Q200 Pro at 1.47 inch and the L200 at 1.08 inch in between. A larger screen shows more settings at once and also presents a larger glass surface.
Locks are printed in three forms here: the A-Lock switch on the L200, the manual lock switch on the Z80 Nex, and the fire-button sequence on the Thelema Q200 Pro. A physical switch can be flipped without waking a menu, which some readers prefer in a pocket or a bag. None of the six pages prints a charge time, so no charge duration is claimed in this guide.
Matching a vape mod for ex smokers to a daily routine
A daily routine decides which printed specs matter. A reader who is away from a charger all day gets more from a dual-cell kit or a larger tank, while a reader who vapes at a desk near a cable can run a compact single-cell kit and refill a 5mL tank less often than a smaller one.
Draw style is the other half of the match. Only the Coolfire Z80 Nex prints an MTL coil in the box, so a reader who wants a tight mouth-to-lung draw from a box mod kit should start there or plan a separate tank purchase for the other five. A reader who wants a looser direct-lung draw has the full list to choose from, and the coil bands printed for each kit show which end of that range each tank was built for.
FAQ
The questions below cover the points that the printed specs leave open most often: naming, box contents, ratings, low-wattage use and coil fit. Each answer sticks to what the maker and listing pages for these six kits actually print, and says so where a page prints nothing.
Does any maker sell a vape mod for ex smokers by name?
No page opened for this guide uses that label. Makers sell box mod kits as general hardware with printed output ranges, battery formats and coil families, and the ex smokers wording is a search phrase rather than a product class printed on any box or listing page.
That is why this guide compares printed hardware instead of looking for a badge. The figures that decide whether a kit fits a reader are the cell count, the output floor and ceiling, the tank capacity and the coil bands, and all six makers print those figures openly.
Do these kits include batteries or e-liquid?
All six pages print the batteries as not included or sold separately, in 18650 format, one cell for the M100, Z80 Nex and GEN 80 S and two cells for the L200, Thelema Q200 Pro and G-Priv 4. A charger cable is printed in the box contents, and the Thelema also prints a spare glass.
E-liquid is not a printed box content for any of the six kits. The tanks are refillable and empty in the box, so the liquid, its flavor and its printed strength are a separate purchase chosen by the reader.
What does the IP68 rating on the L200 cover?
The L200 listing page prints an IP68 rating for the kit, and it is the only rating of its kind printed in this list. The page presents the rating alongside the zinc-alloy chassis and the flip cover over the Type-C port, as part of the kit’s printed build specification.
No other kit here prints an ingress rating, so no sealing claim is made for them. A printed rating describes the test standard the maker lists for the device; it is not a promise about any individual unit, and the page does not print a depth or duration figure.
Can a box mod run at low wattage for a mouth-to-lung tank?
The printed floors say yes for most of this list: 5W on the L200, Thelema Q200 Pro, Centaurus M100 and GEN 80 S, and 6W on the Coolfire Z80 Nex. Any 510-threaded mouth-to-lung tank can be fitted to the 510 connections printed for the Z80 Nex and the G-Priv 4.
The limit is the tank in the box, not the mod. The G-Priv 4 box coils print bands starting at 80W, so a mouth-to-lung setup on that mod means a separate tank and coil purchase, while the Z80 Nex prints its MTL coil in the box.
How do I know which coil fits my tank?
Each maker prints a coil family name for its tank: Z coils for the L200, UB Max for both Lost Vape tanks, the Z Coil Series for the Zenith Nex, V18 Mini for the TFV18 Mini and GTi for the iTank 2. The family name and the resistance are printed on the coil box and on the listing page.
Coils are not shared across brands in this list, and even within one brand the family matters more than the resistance number. Matching the printed family name, rather than the ohm figure alone, is what keeps a spare coil order correct.
Conclusion
For a reader choosing a vape mod for ex smokers, the printed specs point to two clear starting points: the Coolfire Z80 Nex for its MTL and RDL coils in one box, and the L200 for dual-cell output with a printed IP68 rating. The other four kits trade size, screen size and output ceiling in clear printed steps.