Updated Nov 17, 2026· 14 min read

Key takeaways

  • Compare six blank tea towels for block printing, from flour sacks to cotton and linen, with sourced specs, a table, buying advice, prep tips and FAQs for makers

A good block print starts with a good blank, and the cloth matters. The best tea towel blanks for block printing are plain, washable cotton or linen cloths that take paint evenly and stay flat under the block. This guide compares six options using only what each page states, then explains how to prep, size and care for them.

Quick verdict on the best tea towel blanks for block printing

For a one-stop choice, Mary’s Kitchen is the only blank here whose page names block printing outright, and it is pre-washed. Craft Basics Premium Natural suits rustic work, Stuart Morris offers cotton and linen union rectangles, and a kit with a wooden block suits first-timers.

  • Named for block printing: Mary’s Kitchen 27 x 27 flour sack, listed for embroidery, screen printing, block printing and vinyl.
  • Rustic and tall: Craft Basics Premium Natural, pre-washed and unbranded.
  • Rectangular wholesale blanks: Stuart Morris 100% cotton, or the cotton and linen union.
  • Beginner kit: Indian Tree Tea Towels block printing kit, with towels, a block and paints.

Side-by-side comparison of tea towel blanks

This table lines up the fabric, size and finish that each page states. Price and product codes are left out on purpose. If a page does not state something, such as a pack count, a pre-wash or a print method, the cell says so instead of guessing, and you can ask the seller.

Blank or kit Fabric Size as listed Best for Main trade-off
Mary’s Kitchen flour sack 100% cotton, 130 thread count, 3 oz each, pre-washed 27 x 27 inches Named for block printing Pack count not stated
Craft Basics Premium Natural 100% cotton textured woven, pre-washed 22 x 36 inches, plus or minus up to 2 inches Rustic, tall layouts Textured weave, uneven sizes
Craft Basics Deluxe Natural 100% cotton, lint free, flat finish 28 x 29 inches Natural, flat surface Page names DTG, not block printing
Stuart Morris cotton 100% cotton, 169gsm, plain weave 78cms x 48cms Bulk white or natural blanks Only two sides hemmed
Stuart Morris linen union 50% cotton 50% linen, 185gsm 78cms x 48cms Textured, premium look Inconsistent weave wording
Indian Tree block printing kit 2 x 100% white cotton tea towels, wooden block, fabric paints Block is 5.5 x 7cm; towel size not stated First-time printers Towel size and weight not stated

How we selected tea towel blanks for block printing

Selection rests on what the maker or seller pages say. A blank made the list when its page names a printing or stamping use, or sells a plain cotton or cotton and linen tea towel with its fabric content and size stated. Missing facts are marked as unknown.

What made the shortlist

Each pick needed a page that names the fabric and gives a size. Block printing works best on fabric that is plain, absorbent and easy to wash, so cotton and cotton and linen cloths were the focus. Finished, pre-printed towels and print-on-demand services were left out because they do not sell a blank you can stamp.

What we weighed

The comparison favors flat or plain weaves, stated fabric content, pre-washing where the page says it, hems that frame a clean print area and wording that mentions block printing. A general guidance page on block printing a tea towel was used for method advice, not for product specs.

Tea towel blanks reviewed one by one

Each entry below covers who the blank suits, what the page states, the limits and a buy or skip note. Specs are quoted as listed. None of this comes from hands-on use, so treat the notes as a guide to what to ask and what to sample before you commit to a batch.

Mary’s Kitchen Towels 27 x 27 flour sack towels

This is the pick for printers who want a pre-washed square blank that the seller already markets for block printing. A square shape suits a centered motif, a repeat border or a four-corner design, and it works whichever way the towel is hung in a kitchen or wrapped around a gift.

The page lists 100% premium cotton, a 130 thread count and 3 oz each, with a uniform 27 x 27 inch square. It says the towel is pre-washed to avoid shrinking, washer and dryer safe, and has a corner loop for storage or hang drying. The listing describes it as a blank for embroidery, screen printing, block printing and vinyl.

  • Pros: block printing named on the page, pre-washed, square layout, loop included.
  • Cons: pack count not stated, and no paint or heat setting advice.

A pre-washed cloth means the towel should not change size much after you heat set and wash the finished print. You still need to iron it flat before stamping, because creases will break up the pattern and leave blank gaps in the print.

Buy if you want a seller that names block printing and a stable, pre-washed base. Skip it if you want a long, narrow shape or an unbleached natural color.

Craft Basics Premium Natural flour sack towel, 22 x 36

This long, natural beige towel suits printers who like a rustic, farmhouse look. The tall shape gives room for vertical stripes, a row of repeating blocks or a centered motif with a border above and below it, which gives the design room to breathe on the cloth.

The page lists 100% cotton textured woven fabric, a heavy-weight towel with a 130 thread count and a natural beige unbleached color. It states the towel is hemmed on all four sides with polyester thread, piece-processed, pre-washed and lint free, with a corner hang loop, no brand labels and finishing in the U.S. with imported fabric. Sizing is described as rustic, within plus or minus up to 2 inches.

  • Pros: pre-washed, no labels, four hemmed sides, tall layout space.
  • Cons: textured weave can leave a mottled stamp, and sizes are not perfectly uniform.

Textured cloth takes a block differently from flat cloth. Fine carved lines can skip where the weave dips, which gives a handmade look but can frustrate precise work. Use a bolder block, press evenly and expect some variation between prints.

Buy if you want a natural, rustic base with a hand-stamped feel. Skip it if you need hairline detail or exact placement across many towels.

Craft Basics Deluxe Natural flour sack towel, 28 x 29

The Deluxe Natural is for printers who want an unbleached base with a flat, even surface. It is a near-square blank that gives you space for a large block or a grid of smaller stamps without crowding the hems, so a bold motif can sit in the center of the cloth.

The page lists 100% cotton, lint free, a heavy-weight fabric at 130 thread count, a natural unbleached color, a flat finish and a corner hang loop. It says the fabric is processed for more uniform sizes with minimum variability, and that the sewn-in label reads 100% Cotton, Made in India. The page frames printing through a DTG footnote and does not name block printing.

  • Pros: flat finish, natural color, uniform sizing claim, lint free wording.
  • Cons: block printing is not named, pack count not stated, and the page says the stated size will change later.

A flat finish should help a block make full contact with the cloth. The page does not describe how the finish feels or whether it is pre-washed, so wash and iron a towel before you start and print a sample to see how the paint sits.

Buy if you want a natural, flat base and you are happy to run your own test. Skip it if you want a seller that names block printing or confirms pre-washing.

Stuart Morris 100% cotton blank tea towels

Stuart Morris is a wholesale blank supplier, and its cotton towel is the plainest rectangle here. It suits studios that sell a classic tea towel shape, in white or natural, and are comfortable working in centimeters and grams per square meter, which is how the page lists the cloth.

The page lists a 100% cotton towel at 169gsm with a plain weave, sized 78cms x 48cms with slight variation possible. It is available in bleached white and natural finishes, hemmed on the two longer sides and called the most popular choice for blank tea towels. The page says the towel is for printing but does not name a method or say whether it is pre-washed.

  • Pros: plain weave, white or natural, weight stated in gsm, rectangle shape.
  • Cons: only two sides hemmed, no block printing wording, no pre-wash statement.

With only the long sides hemmed, the short ends are raw or finished in a way the page does not describe. Plan your block layout to sit well inside the cloth, and pre-wash the towel so any shrinkage happens before your design is on it.

Buy if you want a classic rectangular blank for white or natural designs. Skip it if you need closed hems on all four sides or a confirmed pre-wash.

Stuart Morris linen union blank tea towels

The linen union is the premium option for printers who want a textured, heritage handle. It suits limited runs where the cloth is part of the product and a slightly irregular print is part of the charm, since a block print on linen rarely looks machine perfect.

The page lists a 185gsm blend of 50% cotton and 50% linen, sized 78cms x 48cms with slight variation possible, in a bleached white finish only. It calls the towel a popular choice for high end tea towels and hems the two longer sides. It describes a plain weave with a beautiful texture, while its introduction mentions a more open weave, so the wording is inconsistent.

  • Pros: cotton and linen blend, heavier weight, premium handle.
  • Cons: one finish only, textured surface, inconsistent weave wording.

A guidance page on block printing a tea towel lists a cotton or linen tea towel, washed and ironed, so a linen blend is a recognized choice. It also says to use fabric preferably 100% cotton, so test a linen blend before you buy a stack of them.

Buy if you want a boutique look and will run a test print. Skip it if you want smooth, predictable ink coverage.

Indian Tree Tea Towels block printing kit

This is a starter kit, not a bulk blank, and it is the right pick for someone who has never carved or stamped before. Everything in the box is chosen to work together, which removes guesswork about paint, applicator and surface, and lets you judge the results before spending on a larger set of blanks.

The page lists an A4 foam printing mat, 2 x 100% white cotton tea towels, 2 sponge dabbers for paint application, an Indian Tree wooden printing block measuring 5.5 x 7cm, teal and sage green fabric paints at 50ml each, and instructions. It comes in a recycled kraft box with a printed sleeve. The page does not state the towel size or weight.

  • Pros: block, paint, dabbers and towels in one box, 100% white cotton.
  • Cons: towel size not stated, only two towels, one block design.

The kit shows how a foam mat, sponge dabbers and a wooden block fit together. If you later move to a different blank, you can reuse the same method with your own block and a fabric paint made for stamping.

Buy if you want to learn block printing with one purchase. Skip it if you need many towels or a specific size.

Buying guide for tea towel blanks for block printing

The right blank depends on your block, your paint and your sales plan. These sections cover the choices that most often change results. They are general guidance, so always follow the paint maker’s instructions for heat setting and washing, and treat a sample towel as part of the buying process.

Choose cotton or a cotton blend

Plain cotton is the safest choice. It absorbs fabric paint evenly, takes washing well and is easy to iron flat. A guidance page for block printed tea towels says to use fabric, preferably 100% cotton. Linen blends are used too, but they add texture and need a test.

Pick a weave that suits your block

A flat, plain weave lets fine linework transfer cleanly. A textured weave leaves a softer, more irregular mark. Neither is wrong. Decide whether you want crisp pattern work or a rustic look, then choose the cloth to match, rather than hoping the block will fix the surface.

Pre-wash and iron before you stamp

Cotton can shrink and may carry finishing agents from manufacture. The guidance page calls for a tea towel that is washed and ironed before stamping, which keeps the cloth flat and stable. If a seller says the towel is pre-washed, you should still iron it flat before printing.

Plan the print area around hems and loops

Hems add thickness and can stop a block sitting flat. Corner loops add a bump in one corner. Mark a clear area between hems, keep the design off the loop and leave a margin so the pattern is framed instead of crowded. Towels with raw ends need extra margin.

Use fabric paint and heat set it

Use a fabric paint made for stamping and follow its instructions. The guidance page says to heat set the paint with an iron according to the paint instructions, then wash the towel before use. None of the product pages here give paint advice, so that information comes from the paint maker.

Match the blank to how you will sell it

For gifts and craft fairs, a pre-washed flour sack with a hang loop reads as finished. For boutique sales, a linen union or a plain wholesale rectangle can look more premium. Think about how the buyer will use the towel, since it will be washed often and should hold up.

Care for printed towels after you finish

Printed towels are working cloths, so tell buyers how to look after them. Follow the paint maker’s heat setting and washing advice, wash a new towel before first use and avoid harsh treatment in the first few washes. The product pages here give basic care wording only, such as washer and dryer safe or cold water and low heat.

Fabric softener can affect how absorbent a towel feels, and bleach can damage both cloth and color. A simple care card with the towel avoids returns. If you sell the towels, state the care instructions from your paint maker and the care wording from your blank supplier, and do not promise results that neither has stated.

Common mistakes with tea towel blanks

The usual errors are skipping the wash, stamping on a creased cloth, using too much paint, overlapping a hem and ordering a full batch before one sample is printed. Too much paint blurs carved detail, while too little leaves patchy coverage. Practice on scrap cloth first, then move to the towel.

Another mistake is assuming every listing is accurate. Several pages here say sizes can vary, and the Stuart Morris linen page describes its own weave two different ways. Measure the towels you receive, and size your layout to the smallest one in the stack.

Ideas for layouts on each blank

On a square, try a centered motif or a four-corner repeat. On the long 22 x 36 inch rustic towel, a vertical border or a row of the same block works well. On the 78cms x 48cms rectangles, a band across one end or a scattered pattern suits the proportions and leaves the hemmed edges clean.

Frequently asked questions

These answers cover what people ask most often when choosing a blank for block printing. They stay general where the product pages are silent, and they point you back to your paint maker and your own sample towel for anything specific to your project.

Are flour sack towels good for block printing?

Many makers use them because they are plain, washable cotton squares. The Mary’s Kitchen page names block printing directly, while other pages here describe printing or embroidery without naming the method. Print a sample to see how your block and paint behave on the cloth.

Do I need to wash a tea towel before block printing?

In general, yes. A washed and ironed towel is flatter, more stable and less likely to shrink after you print. A guidance page for block printed tea towels lists a washed and ironed towel as the starting point, so do the same even if the seller says the cloth is pre-washed.

Can I block print on linen tea towels?

You can. A guidance page lists cotton or linen tea towels as materials, and Stuart Morris sells a cotton and linen union blank. Linen is more textured than cotton, so stamps can look softer or less even, which some makers like. Test one towel with your own block and paint before you commit to a larger run.

What paint should I use?

Use a fabric paint made for stamping and follow the maker’s directions for heat setting and washing. The kit on this list includes two 50ml fabric paints, but the product pages do not recommend a paint for other blanks, so check with your paint supplier.

How big should the block be?

Match the block to the print area between hems. The kit block here measures 5.5 x 7cm, which suits a repeat pattern across a towel rather than one large motif. For a single centered design, choose a larger block and a square or near-square blank, and keep a clear margin on every side of the cloth.

Can I reuse the same blank for screen printing?

Some of these blanks are also listed for other methods. Mary’s Kitchen names screen printing, vinyl and embroidery next to block printing, so one towel style can serve several techniques. That helps if you sell more than one kind of product and want to keep a single base for your stock.

Conclusion

For most makers, Mary’s Kitchen is the simplest blank, since its page names block printing and calls the towel pre-washed. Choose Craft Basics for a rustic look, Stuart Morris for rectangular wholesale blanks, and the Indian Tree kit to learn. Wash, iron and test one sample first, then order your full batch.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.