Key takeaways
- Compare stainless steel pull down kitchen faucets with soap dispenser bundles in matching finishes, with stated flow rates, swivel ranges, and deck counts.
A stainless finish shows every water spot, so the finish engineering matters as much as the faucet. These stainless steel pull down kitchen faucets with soap dispenser picks pair a stainless or spot free stainless finish with a dispenser in the same finish, all stated on the maker pages opened for each model.
Quick verdict
The Kraus Bolden combo leads on construction: solid brass under a Spot Free Stainless Steel finish, a coordinating dispenser in the same finish, and a stated flow rate of 1.75 gpm. The Kraus Sellette matches it on finish pairing and adds the widest mounting range here, one to three holes plus the dispenser hole.
The Kohler Setra is the flow-rated alternative, with a stainless finish option on its specification sheet and a top-fill dispenser. The Kraus Britt brings the commercial spring style in the same spot free finish family. The Delta Essa bundle closes the list with an Arctic Stainless faucet paired with the maker’s own dispenser, though the bundle page opened shows the chrome version, which the article flags.
Read the group as two finish strategies. The Kraus trio bets on spot free stainless, where the maker’s claim is fewer visible marks between cleanings. The Kohler and Delta picks bet on conventional stainless finishes backed by spray face designs that wipe clean in seconds. Both strategies are honestly stated on the pages opened; the choice between them is about how often you want to reach for a cloth.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Kraus Bolden KPF-1610SFS-KSD-43SFS | Pull-down with dispenser | Brass body in spot free stainless | 1.75 gpm, 8 3/4 in reach | 180 degree swivel only |
| Kraus Sellette KPF-1680SFS-KSD-80SFS | Pull-down with dispenser | Widest mounting range | 1.8 gpm, 1 to 3 hole install | Tall body at 17 5/8 in |
| Kraus Britt KPF-1690SFS-KSD-31SFS | Commercial style with dispenser | Spring spout in spot free finish | 1.8 gpm, 360 degree swivel | Height range of 20 to 30 in |
| Kohler Setra K-R22897-SD | Pull-down with dispenser | Top-fill dispenser, stainless option | 9-9/16 in reach, 1.5 gpm | Lowest stated flow rate here |
| Delta Essa bundle FVS9113-SD-DST | Pull-down with dispenser | Arctic Stainless faucet, maker bundle | 1.8 gpm at 60 psi | Bundle page shows chrome version |
How we selected
Three conditions had to hold at once. The faucet had to be a pull-down model, its maker page had to state a stainless steel finish, and the same source had to state that a soap dispenser is included or bundled in a matching finish. Models failing any one condition were set aside.
Within that filter, spot free and spot resist style finishes were weighed as a genuine advantage rather than a styling note, because the makers describe them in functional terms: finishes that show fewer fingerprints and water spots and need less wiping. Construction came next, with brass and metal bodies as stated, then flow rate and mounting range. Every finish name below is copied from the page opened for that model, and no finish was inferred from a photograph or from a sibling model in the same line.
Stainless steel pull down kitchen faucets with soap dispenser: the shortlist
Five pull-down faucets meet all three conditions on their maker pages. Four are stainless or spot free stainless on both the faucet and the dispenser as stated, and the fifth pairs a stainless-finished faucet with the maker’s own dispenser bundle, with one finish caveat flagged in its section.
Kraus Bolden KPF-1610SFS-KSD-43SFS
The Bolden combo states the strongest construction note in this group: solid brass construction with a stainless steel spout, finished in Spot Free Stainless Steel, with a coordinating soap dispenser included. For a buyer who wants the stainless look without a plated plastic body underneath, that stated build is the reason this model leads.
Kraus lists a flow rate of 1.75 gpm on the combo page, an overall height of 18 in, a spout height of 6 3/8 in, and a reach of 8 3/4 in. The valve is a ceramic cartridge, the spray face has easy-clean nozzles, and the single handle rotates 90 degrees forward, which keeps the lever arc over the sink side of a crowded deck. The low spout outlet suits the stainless brief too: less falling distance means less spray drying on the finish and on the sink’s rear wall.
The reach figure deserves a note for stainless shoppers comparing across this list. At 8 3/4 in, the Bolden’s stream lands well into a standard basin, second here only to the Setra’s stated reach, and it does so from a lower outlet than most tall pull-downs. Buyers with a deep single bowl get the placement of a long-reach faucet without the splash pattern that a high outlet over a deep bowl can produce at full flow.
The limits are swivel and height: the swing is 180 degrees, the narrowest here, and the 18 in body needs open space above the deck. Buy this combo if construction and the matched spot free finish lead your list. Skip it if you need a full 360 degree swing or run low cabinets over the sink.
- Pros: brass construction stated; dispenser in the same spot free finish; low spout outlet
- Cons: 180 degree swivel; tall body
Kraus Sellette KPF-1680SFS-KSD-80SFS
The Sellette pairs its Spot Free Stainless Steel pull-down with a soap dispenser in the same finish, and Kraus describes that finish family as resisting fingerprints and water spots, which is the daily reality of stainless at a working sink. The dispenser is part of the combo model, so the pairing is the maker’s, not the buyer’s guess.
The listed figures are a faucet height of 17 5/8 in, a flow rate of 1.8 gpm, a 360 degree swivel, a ceramic cartridge, and metal construction. The spray face carries easy-clean silicone nozzles, described by the maker as clearing mineral deposits and hard water build-up with a swipe. Mounting covers one, two, or three holes for the faucet, the widest range in this group, with the dispenser on its own additional hole.
That mounting range deserves emphasis because stainless bundles often land in remodels, where the deck pattern is inherited rather than chosen. A faucet that covers one, two, or three holes with its plate options can replace a wider range of older faucets without leaving an exposed hole or demanding a new sink, and the dispenser then takes whichever rear hole the layout leaves free. Few stated specs save more mid-project improvisation than that one.
The limit is the tall body shared with the Bolden, plus the usual dispenser hole. Buy the Sellette if your deck pattern is uncertain and you want the finish match and full swivel in one box. Skip it if overhead clearance is tight.
- Pros: matched spot free finish on both pieces; widest mounting range here; full swivel
- Cons: tall body; dispenser needs its own hole
Kraus Britt KPF-1690SFS-KSD-31SFS
The Britt brings the commercial spring style to the stainless brief: an open coil spout with a stainless steel hose, in all-Brite Spot Free Stainless Steel, with a complementing soap dispenser and deck plate in the box. Kraus describes the finish as showing fewer water spots and fingerprints.
The page lists a flow rate of 1.8 gpm, a 360 degree swivel, and a dual-function sprayhead that shifts between aerated stream and spray through a large non-slip rubber button. The spray face uses easy-clean silicone nozzles, which the maker describes as clearing limescale and hard water build-up with a swipe of a finger, a useful trait where stainless shows dried spray first. Installation runs on one, two, or three holes with the deck plate.
The limit is scale: the stated faucet height range is 20 to 30 in, the tallest in this group by a wide margin, and the spring silhouette dominates a small kitchen. Buy the Britt if the professional look in a spot free stainless finish is the goal. Skip it for low clearances or a quiet traditional style.
- Pros: spring style in spot free stainless; dispenser and deck plate included; full swivel
- Cons: tallest design here; bold style will not suit every kitchen
Kohler Setra K-R22897-SD
The Setra’s specification sheet lists its finishes with a stainless option among them, and the box contents include a top-fill soap and lotion dispenser, which makes this the one pick here that refills from above the deck. The faucet is premium metal construction with ceramic disc valves, per the same sheet.
Kohler lists a two-function pull-down sprayhead with aerated stream and Sweep spray, a spout reach of 9-9/16 in, the longest stated reach in this group, an overall height of 15-15/16 in, and a maximum flow rate of 1.5 gpm at 60 psi. The spray face is the maker’s MasterClean surface, described as withstanding mineral buildup, which pairs well with a stainless finish that shows dried mineral spots clearly. Installation covers one to four holes with the escutcheon plate included.
The sheet adds two working details worth knowing. The sprayhead locks into place through the maker’s DockNetik docking system, and the hose runs on the maker’s ProMotion arrangement with a swiveling ball joint, described as making the sprayhead easier and more comfortable to move. Over a wide stainless sink, where the wand travels constantly between bowls, those stated details shape daily use as much as the finish does.
The limits are flow and the plate look: 1.5 gpm is the lowest stated rate here, and the escutcheon style will not suit every deck. Buy the Setra in its stainless finish if top-fill refills and reach lead your list. Skip it if fill speed matters most.
- Pros: stainless finish option stated; top-fill dispenser; longest reach here
- Cons: 1.5 gpm maximum flow; escutcheon plate styling
Delta Essa bundle FVS9113-SD-DST
The Essa’s own maker page lists the faucet in Arctic Stainless, with Touch-Clean spray holes, a 360 degree swivel, and a flow rate of 1.8 gpm at 60 psi. Delta also sells the Essa in a named bundle with its RP1001 soap and lotion dispenser, model FVS9113-SD-DST.
The faucet’s valve is the Euromotion DIAMOND valve with DIAMOND Seal Technology, and the wand docks through the maker’s MagnaTite magnetic system on a 20-inch retractable hose. The Touch-Clean holes, soft rubber spray holes the maker describes as wiping clear of calcium and lime build-up with a finger, suit a stainless finish particularly well, since the same build-up that clogs nozzles also dulls the finish around the spray face.
The caveat is finish evidence on the bundle itself: the bundle page opened presents the bundle in chrome, so the stainless pairing rests on the faucet’s own Arctic Stainless listing plus the maker’s bundle. Confirm the bundle finish options on the maker page before ordering. Buy it if that confirmation checks out and you want the mainstream pick. Skip it if the matched stainless bundle must be guaranteed on one page.
- Pros: Arctic Stainless faucet listing; maker bundle with named dispenser; wipe-clean spray holes
- Cons: bundle page shows chrome; finish pairing needs one confirmation step
Buying guide
Stainless narrows the field to finish questions first and faucet questions second. The sections below cover how spot free finishes differ from plain stainless as the makers describe them, how to verify a dispenser finish match, and the standard checks on flow, mounting, and height that still decide between these five.
Spot free finishes versus plain stainless
Three of the five picks wear a spot free stainless finish, and their maker describes it in working terms: fewer fingerprints and water spots, less wiping after use. A plain stainless finish carries no such stated claim on its page, and its upkeep is the standard wipe-down routine.
Neither finish changes the metal under it. What changes is how often the faucet looks freshly cleaned. In a hard-working kitchen where the faucet is handled with wet hands all day, the spot free claim is worth real weight; in a lighter-use kitchen, plain stainless with a matching dispenser is a perfectly rational pick.
Verify the dispenser finish, not just the faucet finish
A bundle can pair a stainless faucet with a dispenser in a different finish family if the buyer is not careful. The Kraus combos remove the doubt by stating both pieces in Spot Free Stainless Steel. The Kohler sheet lists the dispenser in the box contents under the model’s finish options.
When you order, match the finish name character for character between the faucet and the dispenser. Stainless finish names differ between makers and even within one maker’s range, and two finishes that look alike in photographs can differ noticeably on the deck.
Flow rate and spray face upkeep
The stated flow rates here run from 1.5 gpm on the Setra to 1.8 gpm on the Sellette and Britt, with the Bolden combo at 1.75 gpm and the Essa at 1.8 gpm at 60 psi. Those figures decide fill speed, and they are quoted exactly as the pages state them, including the pressure basis where one is printed.
Spray face upkeep matters more on stainless than on chrome, because dried spray shows on the finish around the nozzles. Every pick here answers with an easy-clean design: silicone or soft rubber nozzles on the Kraus models, a MasterClean surface on the Kohler, and Touch-Clean holes on the Delta. Prefer the design whose cleaning motion, a finger swipe, you will actually do weekly.
Mounting range and the dispenser hole
The dispenser always adds a hole. Faucet patterns here run from the Bolden’s narrower arrangements to the Sellette’s one, two, or three holes and the Setra’s one to four with its plate. Count every deck hole, including any already promised to a separate sprayer or a filtration tap, before choosing.
Also check the rear strip width. A dispenser pump head, a faucet body, and a swinging lever all share that strip on most decks. Forward-rotating handles, stated on the Bolden combo, keep the lever arc over the sink and away from the dispenser, which is a small stated detail with daily value.
Height and style fit
Heights spread widely in this group: 15-1/4 in for the Essa, 15-15/16 in for the Setra, 17 5/8 in and 18 in for the Sellette and Bolden combo, and the Britt’s 20 to 30 in spring range. Measure the space above your deck before falling for any of them, especially under a window with a low sill.
Style follows the same spread, from the Setra’s and Essa’s restrained profiles to the Britt’s industrial spring. Stainless is the common thread, so the choice can honestly be made on silhouette and clearance once the finish and dispenser conditions are met.
FAQ
Stainless bundle questions repeat: whether the dispenser truly matches, what spot free means in practice, and which numbers to check before ordering. The answers below use only the finish names, inclusions, and figures the maker pages and the Kohler sheet state for these five models.
Are the dispensers in stainless steel pull down kitchen faucets with soap dispenser bundles the same finish?
On the Kraus combos, yes by the maker’s own statement: faucet and dispenser are both listed in Spot Free Stainless Steel. On the Kohler Setra, the dispenser is part of the model and its finish options, which include stainless. On the Delta bundle, the dispenser is the maker’s own RP1001.
The general rule is to trust inclusion statements, not photographs. If the page does not state the dispenser’s finish, treat the match as unproven and check the maker’s finish list for the dispenser model itself.
What does a spot free stainless finish actually do?
As the Kraus pages describe it, the finish shows fewer water spots and fingerprints and needs less wiping to look clean. It is a surface treatment claim about appearance and upkeep, not a claim about the water or the metal, and the article repeats it only in those terms.
It does not make the faucet self-cleaning. The spray face still needs the nozzle wipe the makers describe, and the body still benefits from a dry cloth after heavy use. Buy spot free for fewer visible marks between cleanings, not for no cleanings.
Which of these has the strongest stated flow?
The Sellette and the Britt state 1.8 gpm, and the Essa states 1.8 gpm at 60 psi. The Bolden combo states 1.75 gpm on its combo page, and the Setra states 1.5 gpm at 60 psi. Those are the makers’ own figures, quoted as printed, and they are close enough that mounting and refill style may matter more.
Note the Bolden figure carefully: the combo page states 1.75 gpm while the faucet-only page states 1.8 gpm for the same faucet family. The article uses each page’s figure for the model as sold on that page, which is the honest way to quote a bundle.
Can these dispensers be installed on a granite or quartz deck?
That depends on the deck’s existing holes and thickness, which the maker pages do not settle for a specific countertop. The stated facts are the mounting patterns: each dispenser needs its own hole, and the faucets here cover patterns from a single hole to the Setra’s four-hole arrangement with its plate.
If your stone deck lacks a spare hole, drilling stone is a specialist job to arrange before ordering. The faucet decision and the deck decision are separate, and this article’s evidence covers only the faucet side.
Is a soap dispenser worth a deck hole?
For most kitchens, yes: it removes the soap bottle from the counter, keeps soap at the sink where it is used, and in these bundles it arrives finish-matched at no separate shopping step. The Setra’s top-fill design strengthens the case by removing the under-sink refill chore.
The cost is the hole itself and a small loss of deck flexibility. If your deck holes are already committed to a sprayer and a filtration tap, a countertop bottle remains the practical answer, and any of these faucets also works without its dispenser installed.
Conclusion
Take the Kraus Bolden combo for brass construction in a matched spot free finish, the Sellette for mounting flexibility, and the Kohler Setra for top-fill refills in a stainless finish. The Britt owns the spring style; the Essa bundle is the mainstream pick once its finish is confirmed. Match the finish names first, then measure the deck.