Key takeaways
- Five KitchenAid 5 quart mixers compared on maker-listed specs: bowl material, tools in the box, drive design, speeds and dimensions, tilt-head and bowl-lift.
Five current KitchenAid models carry a 5 quart bowl, and they are separated by bowl material, tools and drive design rather than capacity. This guide compares prices for kitchenaid 5 quart mixers on the maker-listed specifications alone: head design, bowl, included tools, motor figures and dimensions.
Quick verdict
The five models below share a 5 quart bowl size and a 10 speed control, and differ almost everywhere else. Four are tilt-head machines built on the Artisan platform with different bowls and tool sets. The fifth, the Professional 5 Plus, is a bowl-lift machine with a stronger motor figure, a direct drive and all-steel gears.
For most kitchens the Artisan Series 5 is the reference model: a 325 W motor, a stainless steel bowl with a handle, and the standard three tools plus a pouring shield. The Premium Accessory Pack version keeps the same footprint and adds a second bowl and two extra beaters. The Professional 5 Plus is the pick for heavy dough work, with 450 W and a bowl-lift frame that stays planted under load.
The two Design Series models separate on bowl material alone. The Evergreen pairs the Artisan platform with a true walnut wood bowl and stainless steel tools, and the Artisan Design model pairs it with a glass bowl that carries measurement markings and a pouring spout. Same capacity, same speed count, three different answers to what a bowl should be made of.
How we selected
Every model here was chosen from its maker’s published figures, and each one had to meet one test first: a 5 quart bowl printed on its own maker page, manual or listing. Models with 4.5 quart or 3.5 quart bowls, however close the family resemblance, were left out, as were older generations no longer listed for sale.
The comparison runs on specifications only. Head design, bowl material, the tools in the box, motor and drive figures where a maker source prints them, dimensions and weight are the separators used throughout. Where a figure could not be verified from an opened page, the entry says so instead of borrowing the number from a sibling model.
Availability was taken from the same opened pages: each model below was listed for sale on the page used for its figures. Two entries carry notes where a listing figure conflicts with a maker figure; in both cases the maker figure governs and the conflict is stated in the product entry.
| Product | Head | Bowl | Motor | Main limit |
|---|---|---|---|---|
| KitchenAid Artisan Series 5 (KSM150PS) | Tilt-head | 5 qt stainless steel with handle | 325 W | Standard tool set only |
| KitchenAid Artisan Series 5 with Premium Accessory Pack (KSM195) | Tilt-head | 5 qt plus 3 qt stainless steel | Not stated by the maker | No verified US motor figure |
| KitchenAid 2024 Design Series Evergreen (KSM180WSEG) | Tilt-head | 5 qt walnut wood | Not stated by the maker | Wood bowl is the only bowl in the box |
| KitchenAid Artisan Design Series 5 with Glass Bowl (KSM155GB) | Tilt-head | 5 qt glass with markings | Not stated by the maker | Older line; confirm current stock |
| KitchenAid Professional 5 Plus (KV25G0X) | Bowl-lift | 5 qt stainless steel wide-mouth | 450 W | Tallest and heaviest here at 25 lb |
Prices for KitchenAid 5 quart mixers, model by model
Five models, one bowl size and two head designs. Read each entry for who it suits, the figures the maker publishes, and the limit that should rule it out for some kitchens, so the separator that matters to you, bowl, tools or drive, decides the choice.
KitchenAid Artisan Series 5 Tilt-Head Stand Mixer (KSM150PS)
The Artisan is the model the rest of this group is measured against. Its manual prints a 325 W motor, 120 V, 10 speeds and a 5 qt stainless steel bowl with a handle, and rates the machine for up to 9 dozen cookies in a single batch. The flat beater, dough hook, wire whip and pouring shield in the box cover the standard run of home baking.
The tilt-head design lifts the head clear of the bowl for additions and tool changes, and the power hub runs optional attachments. The machine measures 14.1 inches deep, 8.7 inches wide and 13.9 inches high, and weighs 22.8 lb. The bowl handle matters more than it sounds: a full 5 qt bowl of dough is a two-hand lift, and the handle gives the second hand somewhere to work.
- Pros: full maker figure set printed; handled steel bowl; pouring shield included
- Cons: one bowl; standard three-tool set
Because this is the longest-running configuration in the group, its printed figures are also the most complete: motor, dimensions and weight all appear in the maker’s own manual. The other tilt-head models below share its footprint and speed control, so every difference that follows is a difference of bowl, tools or finish, not of the basic machine.
Buy if you want the reference 5 quart KitchenAid with every figure printed. Skip if you want a second bowl or extra beaters in the box from the start.
KitchenAid Artisan Series 5 with Premium Accessory Pack (KSM195)
The KSM195 is the Artisan platform sold as a kit. The box holds two bowls, a 5 qt stainless steel bowl with a handle and a 3 qt stainless steel bowl, and five tools: a flex edge beater, a pastry beater, a coated dough hook, a 6 wire whip and a pouring shield, against the standard model’s three tools and one bowl.
The maker’s copy rates the model for up to 9 dozen cookies, and describes the two-bowl setup in plain terms: batter in one bowl, frosting in the other. The listing prints dimensions of 35.8 cm deep, 22.1 cm wide and 35.3 cm high, the same footprint as the standard Artisan in metric form. Ten speeds and the tilt-head design carry over. One gap: no US motor figure could be verified from an opened maker page for this model, and listing wattage figures conflict, so no wattage is printed here.
- Pros: two bowls and five tools in the box; flex edge and pastry beaters included
- Cons: motor figure not verified; same footprint, more parts to store
The flex edge beater is the tool that changes daily use most: its flexible edge wipes the bowl wall as it turns, which cuts the scraping stops during creaming. The pastry beater is the specialist, built for cutting butter into flour. Neither tool changes the machine under them, so this model is a tooling decision, not a power decision.
Buy if the second bowl and the extra beaters are tools you would otherwise add later. Skip if the standard tool set already covers your baking and storage is tight.
KitchenAid 2024 Design Series Evergreen Tilt-Head Stand Mixer (KSM180WSEG)
The Evergreen is the Design Series entry: a deep forest green Artisan-platform machine whose bowl is true walnut wood. The maker’s page lists a 5 Quart Walnut Wood Bowl in the box, and describes each bowl’s grain pattern as unique, with a brass plated hub cover carrying a debossed leaf design on the machine itself.
The tools step up in material: a stainless steel flat beater, a stainless steel dough hook and a stainless steel 6 wire whip, against the coated or burnished tools of the other tilt-head models. Ten speeds and the tilt-head design match the rest of the platform, and the hub runs more than 10 optional attachments sold separately. The maker’s specifications tab did not print a motor figure, dimensions or weight on the page opened for this guide, so none are stated here.
- Pros: stainless steel tool set; walnut bowl unique to this model; maker page shows it in stock
- Cons: wood is the only bowl material in the box; motor figure not printed
A wood bowl changes the daily routine in ways a specification table only hints at: it is a bowl to wash and dry by hand and to keep out of standing water, where the steel and glass bowls in this group ask for no such care. In exchange, it is the lightest-feeling large bowl of the three materials and the only one that doubles as a serving piece at the table.
Buy if the walnut bowl and the stainless tools are the point of the purchase. Skip if you want a bowl that goes in the dishwasher or a printed motor figure.
KitchenAid Artisan Design Series 5 with Glass Bowl (KSM155GB)
The glass bowl model pairs the Artisan platform with a 5 qt glass bowl that carries graduated measurement markings and a pouring spout. The listing prints 10 speeds, the tilt-head design and 59-point planetary mixing action, and the box holds a burnished metal flat beater, a burnished metal dough hook and a wire whip.
Glass is the measurable bowl: the markings let you read volume as you add, and the clear wall shows a mixture’s texture and color as it comes together, which is why this configuration has long been the choice for bakers who melt, measure and mix in one vessel. The power hub fits more than 15 optional attachments per the listing. No motor figure, dimensions or weight were printed on the opened listing, so none are stated here.
- Pros: measurement markings and spout on the bowl; burnished metal tools
- Cons: older Design Series line; glass is the heaviest bowl material to lift
This is the oldest line in the group, and that cuts both ways. The configuration is well documented, and the glass bowl remains the only marked bowl KitchenAid prints in this size. Against that, current stock needs confirming at the point of purchase, since the model no longer anchors the maker’s current tilt-head range the way the standard Artisan does.
Buy if measuring in the bowl is part of how you bake. Skip if you want the current line’s tool set or a bowl you can knock against the counter edge without thinking.
KitchenAid Professional 5 Plus Series Bowl-Lift Stand Mixer (KV25G0X)
The Professional 5 Plus is the structural outlier: the only bowl-lift model and the only one whose maker prints a drive description. Its manual lists a 450 W motor, a direct drive transmission, all-steel gears and all-metal construction behind a 5 qt polished stainless steel wide-mouth bowl with a handle.
The bowl rises to the head on a lever instead of the head tilting back, which keeps the machine’s footprint fixed and its frame steady under heavy loads. The box holds a PowerKnead spiral dough hook, a flat beater and a stainless steel wire whip, and the attachment hub has a hinged cover. Ten speeds match the group. The machine measures 11.3 inches deep, 14.6 inches wide and 16.5 inches high, and weighs 25 lb, the tallest and heaviest figures here. One listing prints 525 W for this model; the manual’s 450 W governs.
- Pros: strongest printed motor figure; direct drive and steel gears; bowl-lift stability
- Cons: 16.5 inch height needs cabinet clearance; no pouring shield listed
The wide-mouth bowl is the working difference bakers notice: the opening is broad enough to add flour across the surface rather than through a gap beside a tilted head. Against that, adding ingredients mid-mix takes more care than with a tilt-head, and the fixed head means the bowl, not the machine, does all the moving.
Buy if dough work is heavy and frequent and the counter can take a 25 lb machine full time. Skip if under-cabinet height is limited or you add ingredients constantly while mixing.
Buying guide
With capacity and speed count held constant across this group, the choice reduces to five separators: head design, bowl material, the tools in the box, the motor and drive figures, and the machine’s dimensions. The points below take them in that order, using the five models in this guide as the worked examples.
Tilt-head or bowl-lift
Four of the five models tilt their heads back for bowl access; the Professional 5 Plus lifts its bowl to a fixed head. A tilt-head is easier for frequent additions and tool swaps, and it is the design most home bakers already know. A bowl-lift keeps the head and frame in one plane, which is why the design carries the heavier drive in this group.
Height decides many of these choices before preference does. The tilt-head models stand 13.9 inches tall with the head down and need clearance above that to tilt. The bowl-lift stands 16.5 inches tall at all times but never needs more. Measure the counter-to-cabinet gap first; the figure rules models in or out without any further debate.
What separates prices for KitchenAid 5 quart mixers on paper
On paper, the separators are bowl material, tool count and drive design. The standard Artisan prints a steel bowl and three tools; the Accessory Pack prints two bowls and five tools; the Evergreen prints a walnut bowl and stainless tools; the glass model prints a marked glass bowl; the Professional prints a bowl-lift frame, direct drive and 450 W.
Read in that order, the range explains itself: each step changes something physical in the box, not the capacity on the front of it. A buyer who lists which of those physical changes they will actually use, a second bowl, a flex edge beater, a marked bowl, a lift frame, has effectively made the choice before any figure is compared.
Bowl material: steel, glass or walnut wood
Stainless steel is the default for a reason: light for its size, hard to damage, and printed with a handle on the Artisan and the Professional bowls. The Professional’s bowl adds a wide-mouth shape that eases additions. Steel is also the only material here that appears in two sizes in one box, the 5 qt and 3 qt pair of the Accessory Pack.
Glass trades weight for information: markings and a clear wall, at the cost of the heaviest lift and a bowl that chips if it meets the counter wrong. Walnut wood trades care for character: a unique grain, a bowl that asks for hand washing and drying, and the only one of the three that leaves the counter for the table. None of the three changes what the machine can mix; all three change how the bowl is handled daily.
Tools in the box
Count the tools before comparing anything else, because the spread is wide: three tools with the standard Artisan, the glass model and the Professional, and five with the Accessory Pack. The two extra tools there, the flex edge beater and the pastry beater, are the ones bakers most often add later, which is the entire logic of that bundle.
Tool material varies too. The Evergreen prints stainless steel for all three of its tools; the glass model prints burnished metal; the Accessory Pack prints a coated dough hook beside its beaters. The Professional’s set is shaped differently rather than finished differently: its spiral dough hook is the PowerKnead design, built for yeast doughs in a way the C-shaped hooks of the tilt-head models are not.
Motor and drive figures
Only two models in this group carry verified motor figures: 325 W for the Artisan and 450 W for the Professional 5 Plus. The other three print no figure on the pages opened for this guide, and their entries say so. A missing figure is not a weak figure; it is an unverified one, and the honest response is to compare those models on what is printed.
Drive design is printed only for the Professional: direct drive with all-steel gears. The tilt-head models print no drive description on the pages used here. Where dough work is the deciding job, the printed combination of 450 W, direct drive and a spiral hook is the strongest specification in the group, and it belongs to the bowl-lift model alone.
FAQ
Most questions about this model range come down to what actually differs between machines that share a bowl size. The answers below rest on the maker figures printed for the five models in this guide, and on the separators those figures support. Nothing here rests on a figure the maker did not print.
Why do prices for KitchenAid 5 quart mixers differ between models?
Because the machines differ in everything except capacity. The printed separators are head design, bowl material, tool count and tool material, and drive design: a walnut bowl is not a steel bowl, five tools are not three, and a bowl-lift frame with a direct drive is not a tilt-head. Each model changes at least one of those physical facts.
The Artisan platform underneath four of the five models is shared, which is why the differences read as a list of parts rather than a list of machines. Deciding which parts you will use, the second bowl, the flex edge beater, the marked glass, the walnut, the lift frame, is the same as deciding between the models.
Is the 5 quart bowl the same across all five models?
The capacity is the same; the bowls are not. This group prints a handled stainless bowl, a two-bowl stainless set, a walnut wood bowl, a marked glass bowl and a wide-mouth stainless bowl, each shaped for its own machine. Bowl fit follows the model and head design, so a bowl printed for one model is not a spare for another without a fit check.
Batch ratings, by contrast, travel across the platform: the maker prints up to 9 dozen cookies for the standard Artisan, the Accessory Pack and the Professional alike. Capacity in use is a property of the 5 quart size; the bowl in hand is a property of the model.
Which model should a bread baker choose?
On printed figures, the Professional 5 Plus: 450 W, a direct drive, all-steel gears and a spiral dough hook shaped for yeast doughs, in a frame that does not tilt under load. Its wide-mouth bowl also takes flour additions across a broad opening, which suits the way bread dough is built.
Tilt-head bakers are not excluded from bread; the Artisan’s manual prints its own dough guidance and the platform’s 9 dozen cookie rating implies real dough capacity. The separator is frequency and load: occasional loaves suit either design, while weekly heavy dough work matches the model whose printed drive was built for it.
Do these models share attachments?
The hub attachments do: every model here prints a power hub or attachment hub, and the maker prints 10 or more optional attachments for the tilt-head models. Pasta, grinding and slicing attachments move between these machines because the hub standard is shared across the platform.
Beaters and bowls are the model-specific parts. A flex edge beater is sized to its bowl and head design, and the bowl-lift Professional takes its own bowl and tool geometry. Treat hub attachments as shared and everything that enters the bowl as model-specific, and few ordering mistakes follow.
What should I check before choosing the Evergreen or the glass model?
Two things: care and currency. The walnut bowl asks for hand washing and drying as part of its routine, and the glass bowl asks for the care any large glass vessel does. Both are Design Series lines rather than the standard range, so current stock and the exact configuration on offer deserve a check at the point of purchase.
Figures deserve the same check. Neither model printed a motor figure, dimensions or weight on the pages opened for this guide, so a buyer who needs those numbers should take them from the maker’s current specification listing for the exact model code, KSM180WSEG or KSM155GB, rather than from the standard Artisan’s sheet.
Conclusion
Same 5 quart capacity, five different machines: the Artisan is the reference, the Accessory Pack the tooling step, the Evergreen and the glass model the bowl choices, and the Professional the heavy-drive outlier. Choose by bowl, tools and head design, and the printed figures will not steer you wrong.