Updated Nov 17, 2026· 16 min read

Key takeaways

  • Compare six electric and gas power washers for stripping wood decks by listed specs, nozzles, and fit. Find the right match for your deck and finish today.

Old stain, peeling finish, and gray weathered fiber can make a wood deck look tired long before the boards wear out. The best power washers for stripping wood decks pair enough force to lift loose finish with fan tips that spread that force across the grain. This guide compares six models from published maker and manual pages.

Quick verdict

For most deck stripping jobs, a gas model with higher flow clears loose finish faster, while a mid-range electric model suits smaller decks and lighter coats. The Simpson MegaShot MSH3125-S leads on listed flow among the gas picks here, and the Greenworks GPW2300 offers a useful balance for electric buyers.

Product Type Best for Key spec Main limit
Sun Joe SPX3000 Electric Pressure Washer Electric Smaller decks and light finish 2030 PSI, 1.2 GPM Lower rated flow
Westinghouse ePX3500 Electric Pressure Washer Electric Compact storage and easy moves 2500 max PSI, 1.76 GPM Turbo tip needs care on soft wood
Greenworks GPW2300 Electric Pressure Washer Electric All-around electric deck work 2300 PSI, 1.2 GPM Heavier at 41.2 lbs
Simpson MegaShot MSH3125-S Gas Pressure Washer Gas Large decks and thick old finish 3100 PSI, 2.5 GPM Gas upkeep and engine care
DeWalt 61147S Gas Pressure Washer Gas Heavy residential stripping 3300 PSI, 2.4 GPM Heavy at 64 lbs
Westinghouse WPX3200 Gas Pressure Washer Gas Full deck prep before recoating 3200 PSI, 2.5 GPM Gas upkeep and engine care

How we selected

Selection came from published specifications and manual pages for machines that suit deck work, not from hands-on use. Each model below had a page that listed its pressure, flow, nozzle set, hose length, and other core details. Models were grouped by power source so readers can match a machine to deck size and finish.

Power washers for stripping wood decks

These six machines cover the main ways to approach a deck stripping job, from plug-in electric units to gas units with higher flow. Each entry gives the listed specs, the kind of deck work it fits, and the limits to weigh. Use the comparison table above to narrow the list, then read the full entry for the model that matches your deck.

Sun Joe SPX3000 Electric Pressure Washer

The Sun Joe SPX3000 Electric Pressure Washer suits owners who want a light plug-in machine for a smaller deck with a thin or worn finish. The maker lists 2030 PSI of certified rated pressure and 1.2 GPM of certified rated flow from a 13-amp motor. Five quick-connect tips let you move from a pinpoint jet to a wide fan spray.

This model fits the keyword because its wide fan tips and detergent tanks support the slow, even passes that deck stripping needs. The maker describes two 0.9 L onboard detergent tanks that can carry two types of detergent at once. A 34-inch extension wand helps reach deck edges and rails without bending over the boards for every pass.

The maker lists a 20-foot high-pressure hose and a 35-foot power cord with GFCI protection. The unit weighs 24.3 lbs and has rear wheels for moving it around a yard. The maker also lists a Total Stop System that shuts off the pump when the trigger is not engaged, which helps the pump rest between passes.

Limits are clear in the listed numbers. Rated flow of 1.2 GPM is modest next to the gas models in this guide, so a large deck or a thick coat may take more passes and more time. The 0-degree tip concentrates force in a narrow jet, so it calls for a light touch and a test spot on wood.

  • Pros: Light weight and easy to move; five tips for varied spray widths; dual detergent tanks; long wand and cord.
  • Cons: Lower rated flow than gas models; narrow tip can mark soft wood if held too close; hose reach is shorter than some rivals.
  • Buy if: Your deck is small, the finish is thin or worn, and you want a plug-in machine with simple setup.
  • Skip if: Your deck is large, the finish is thick and bonded, or you have no outdoor outlet near the work area.

Westinghouse ePX3500 Electric Pressure Washer

The Westinghouse ePX3500 Electric Pressure Washer suits owners who want a compact electric unit that is easy to store and move across a deck. The maker lists 2500 max PSI at initial discharge and up to 1.76 GPM of water flow. Its low center of gravity and four-wheel steering are described as anti-tipping features for use on uneven ground.

This model fits deck stripping because it ships with five quick-connect nozzles, including 0-degree, 15-degree, 25-degree, turbo, and soap applicator tips. The turbo tip gives a rotating stream for stubborn patches, while the 25-degree tip gives a wider fan for general passes along the grain. The onboard soap tank holds 20 oz of detergent.

The maker lists a 25-foot hose, a 35-foot power cord with a GFCI plug, and a pro-style steel wand that extends to 17.5 inches. The unit is 16.5 inches tall and weighs 19 lbs, so it fits in a shed or garage corner between jobs. A Total Stop System stops the pump when the trigger is not engaged.

Limits follow from its electric design and its turbo tip. The turbo tip concentrates force in a small moving circle, so it needs a careful distance and a test spot before use on soft or aged boards. The manual also advises a break after 30 to 60 minutes of continuous use, which matters on a long stripping day.

  • Pros: Compact and light; five nozzles including a turbo tip; onboard soap tank; anti-tipping wheel layout.
  • Cons: Turbo tip needs care on soft wood; electric models need a nearby outlet; manual advises rest breaks during long use.
  • Buy if: You want a compact electric washer for a mid-size deck and you value easy storage and movement.
  • Skip if: You need high flow for a large deck, or you want to work long stretches without planned breaks.

Greenworks GPW2300 Electric Pressure Washer

The Greenworks GPW2300 Electric Pressure Washer suits owners who want a capable electric machine for regular deck care and stripping of worn finish. The maker lists 2300 PSI of maximum pressure and 1.2 GPM of rated flow, with 2760 cleaning units. The universal motor runs on 120V at 60 Hz and draws 14 amps.

This model fits deck stripping because its manual gives clear nozzle guidance for wood. The white 40-degree tip is described as best for light cleaning on wood decks and other soft or delicate surfaces. The yellow 15-degree tip gives a narrower fan for tougher patches, and the turbo nozzle tip rotates in a zero to 15-degree pattern for heavy dirt.

The manual states that the machine is used to clean decks, porches, patios, and driveways, and that it is for residential use only. The maker lists a maximum inlet water temperature of 104 degrees F. The manual also warns against household detergents, acids, alkalines, bleaches, solvents, and flammable material in the pump.

Limits are worth noting. At 41.2 lbs, this is the heaviest electric model in this guide, so moving it up steps or across a large yard takes more effort. Rated flow of 1.2 GPM is lower than the gas models here, so thick finish may need more passes. The maker does not state hose length in the manual section used here.

  • Pros: Clear nozzle guidance for wood decks; turbo tip for stubborn patches; detergent tank for soap application; 3-year limited coverage in the manual.
  • Cons: Heavier than other electric picks; lower rated flow than gas models; hose length not stated in the manual section used here.
  • Buy if: You want an electric washer with clear wood-deck nozzle guidance and you work on a mid-size deck.
  • Skip if: You need to carry the unit often, or you want the highest flow for a large deck with thick finish.

Simpson MegaShot MSH3125-S Gas Pressure Washer

The Simpson MegaShot MSH3125-S Gas Pressure Washer suits owners with a large deck and old finish that needs strong flow and steady passes. The manual lists 3100 PSI maximum pressure and 2.5 GPM maximum flow. That flow figure is the highest among the electric models here and matches the top gas pick in this guide.

This model fits deck stripping because higher flow rinses loosened finish and grit away with fewer repeat passes. The manual lists a 25-foot high-pressure hose, cold tap inlet water with a 100-degree F maximum, and inlet water pressure of 20 to 100 PSI. Soap use is listed at a 10 percent maximum consumption rate.

The manual states a one-year limited coverage period for the pump and frame, and a 90-day limited coverage period for product components excluding the pump. The manual also warns against running the unit for more than two minutes without pulling the gun trigger, since that can overheat the pump and cause damage.

Limits come with gas power. The unit needs fuel, oil checks, and outdoor use in a well-ventilated area, and the manual warns that engine exhaust contains carbon monoxide. The manual also notes that rated pressure and rated water flow sit within a manufacturing tolerance of plus or minus 10 percent.

  • Pros: Strong listed flow for large decks; 25-foot hose; clear pump and frame coverage terms; maintenance-free pump noted in the manual.
  • Cons: Gas upkeep and fuel handling; needs outdoor ventilation; pressure and flow vary within a stated tolerance.
  • Buy if: Your deck is large, the finish is old and loose, and you want gas power with high flow.
  • Skip if: You want a plug-in machine, you dislike engine upkeep, or your deck is small enough for an electric model.

DeWalt 61147S Gas Pressure Washer

The DeWalt 61147S Gas Pressure Washer suits owners who want the highest listed pressure in this guide for heavy residential deck prep. The maker lists 3300 PSI of maximum pressure and 2.4 GPM of maximum flow from a DeWalt 208cc engine. The manual describes the unit as suitable for cleaning decks and preparing exteriors for painting.

This model fits deck stripping because its five quick-connect nozzles cover 0-degree, 15-degree, 25-degree, 40-degree, and soap patterns. The 15-degree and 25-degree tips give the middle ground for lifting finish without the narrow focus of the 0-degree tip. A 25-foot MorFlex high-pressure hose and a 16-inch steel wand extend reach across boards.

The maker lists 10-inch pneumatic tires, a welded powder-coated steel frame, and a low-oil shutdown on the engine. The manual lists a fuel tank capacity of 3.6 L and an oil fill of 600 ml of SAE 10W-30 oil. Coverage terms in the manual are 2 years for the engine, 3 years for the pump, and 5 years for the frame.

Limits are weight and fuel care. At 64 lbs, this is the heaviest model in this guide, so moving it across a yard or up steps needs care and a firm grip. The unit is listed as 49-state compliant and does not ship to California. Gas models also need fuel storage and regular oil checks before use.

  • Pros: Highest listed pressure here; five nozzles for varied work; low-oil shutdown; long coverage terms for pump and frame.
  • Cons: Heavy at 64 lbs; gas upkeep and fuel handling; 49-state compliance limits where it can ship.
  • Buy if: You have a large deck with heavy finish and you want strong gas power with a wide nozzle set.
  • Skip if: You need a light machine, you want plug-in power, or you need a unit that ships to California.

Westinghouse WPX3200 Gas Pressure Washer

The Westinghouse WPX3200 Gas Pressure Washer suits owners who want a full deck prep machine with strong flow and a large soap tank. The maker lists 3200 PSI of maximum pressure and 2.5 GPM of maximum flow from a 212cc 4-stroke OHV Westinghouse engine. The manual lists decks among the outdoor surfaces the unit is designed to clean.

This model fits deck stripping because it pairs high flow with five quick-connect nozzles in 0-degree, 15-degree, 25-degree, 40-degree, and soap patterns. The onboard soap tank holds 0.5 gallon, so detergent application can run longer between refills. A 25-foot abrasion-resistant Super-Flex hose gives reach across a deck.

The maker lists 12-inch high-profile, never-flat wheels, a pro-steel wand, and a maintenance-free axial cam pump. The fuel tank holds 0.9 gallon of fresh unleaded gasoline, and the manual advises against ethanol blends above 10 percent. The unit weighs 63 lbs and measures 21.7 by 20.4 by 23.6 inches.

Limits follow from size and gas power. At 63 lbs, the unit is heavy to lift, though the large wheels help it roll across a yard. The manual advises an oil change after the first 5 hours of use, and then every 50 hours or annually. Gas models also need outdoor use and care with fuel storage.

  • Pros: High listed flow; large 0.5-gallon soap tank; five nozzles; never-flat wheels for rough ground.
  • Cons: Heavy at 63 lbs; gas upkeep and oil changes; fuel care and outdoor use only.
  • Buy if: You want a gas washer with high flow, a large soap tank, and a full nozzle set for a big deck.
  • Skip if: You want a light plug-in machine, or you prefer to avoid engine oil and fuel routines.

Buying guide

Choosing a washer for deck stripping means matching force, flow, and nozzle control to the wood in front of you. Loose finish lifts with less force than bonded coats, and soft boards mark more easily than dense boards. The sections below walk through power source, nozzles, detergent, reach, and care.

Pressure and flow for deck work in the best power washers for stripping wood decks

Pressure and flow work as a pair on a deck, and both figures deserve a close look before you buy. Pressure sets how hard the stream hits the surface, while flow sets how much water carries loosened finish away. A machine with high pressure and low flow can still leave debris on the boards, so compare both numbers on the maker page.

Gas or electric power

Gas and electric washers suit different decks, yards, and routines, and the right choice depends on access and upkeep. Electric models plug in, start with a switch, and run with no fuel handling, which suits smaller decks near an outlet. Gas models free you from cords and outlets, which suits large decks.

Gas models in this guide list higher flow, with the Simpson and Westinghouse WPX3200 at 2.5 GPM, while the electric models here list 1.2 to 1.76 GPM. Gas models also need fuel, oil checks, and outdoor use in a well-ventilated area. Electric models need a suitable outdoor outlet and a cord that reaches the deck without strain.

Nozzle choice for wood decks

Nozzle choice shapes how force lands on wood, and it matters as much as the machine itself. A 0-degree tip puts force into a narrow jet that can cut lines into soft boards, so it suits only small stubborn spots with a careful hand. A 15-degree tip gives a narrow fan for tougher patches, while a 25-degree tip gives a wider fan for general passes.

The 40-degree tip gives the widest fan and the gentlest spread, which suits rinsing and light cleaning on wood decks. The Greenworks manual describes the white 40-degree tip as best for light cleaning on wood decks and other soft surfaces. A turbo tip rotates a narrow stream in a circle, so it can clear stubborn patches faster, but it needs a test spot first.

Detergent and surface prep

Detergent and prep set the stage for stripping, and a washer alone cannot fix a deck that is still covered in dirt and loose debris. Clear the deck of furniture, planters, and loose items, then sweep the boards and rinse away surface dirt. Apply a washer-safe detergent with the soap tip at low pressure.

Choose a detergent made for pressure washers and wood, and follow the maker guidance for the machine you own. The Greenworks manual warns against household detergents, acids, alkalines, bleaches, solvents, and flammable material in the pump. The Westinghouse WPX3200 manual says to fill its soap tank with pressure washer-safe detergent only.

Hose, cord, and reach

Reach shapes how smoothly a stripping job goes, since a short hose or cord forces you to move the machine often. Most models in this guide list a 25-foot high-pressure hose, while the Sun Joe SPX3000 lists a 20-foot hose. A longer hose lets you work across a deck without dragging the unit over wet boards or around rail posts.

Electric models also need cord reach. The Sun Joe SPX3000 and the Westinghouse ePX3500 each list a 35-foot power cord, which helps when the nearest outlet sits some distance from the deck. Gas models avoid cords, but they still need a garden hose that reaches the water source and a clear path for the high-pressure hose.

Care and storage after stripping

Care after stripping protects the pump and keeps the machine ready for the next job. Flush the pump with clean water after use, clean the nozzle tips with the included tool, and wipe down the unit to remove dirt and debris. The Westinghouse WPX3200 manual gives this routine after each use, and it applies well to other models too.

Storage needs differ by power source. Electric models should be stored indoors or in a garage or shed to guard against extreme temperatures, as the Westinghouse ePX3500 manual advises. Gas models need fuel drained or stabilized for long storage, and the Simpson manual warns against running the pump dry. Follow the manual for your model.

FAQ

These answers cover the questions owners ask most before stripping a wood deck with a power washer. Each answer stays close to the maker guidance and the specs in this guide, so you can plan the job with a clear view of what a washer can and cannot do on wood. Read the full guide above for the model notes that sit behind each answer.

Can a power washer strip stain from a wood deck?

A power washer can lift loose and worn stain from a wood deck, and it works best on finish that is already peeling or flaking. The stream loosens the bond between finish and wood, and flow carries the debris away. Bonded coats may need more passes, a narrower fan tip, or a chemical stripper before washing, so inspect the finish first.

Which nozzle works best on wood decks?

The 25-degree green tip is a sound starting point for most deck stripping, since it balances force and coverage across the boards. The 40-degree white tip gives a wider, gentler fan for rinsing and for light cleaning on soft wood. The Greenworks manual describes the white tip as best for light cleaning on wood decks.

Use the 15-degree yellow tip for tougher patches, and keep the 0-degree red tip for small stubborn spots only. A turbo tip rotates a narrow stream and can clear stubborn patches faster, but it needs a test spot and a steady distance. Change tips only with the trigger released and the machine stopped, as the manuals direct.

Will a power washer damage wood deck boards?

A power washer can mark wood deck boards when the stream is too narrow, too close, or held in one place for too long. Soft and aged boards mark more easily than dense boards, and a 0-degree tip poses the highest risk. The manuals in this guide warn against pointing the spray at people and against holding a narrow stream on one spot.

Do I need detergent before stripping a deck?

Detergent is not always required, but it helps loosen dirt, mildew, and grime before the high-pressure passes begin. A washer-safe detergent applied with the soap tip at low pressure can lift surface soil that water alone leaves behind. The models in this guide include soap tanks or soap tips for this step, so check the manual for your machine.

Use only detergent made for pressure washers, and follow the label for dwell time and rinsing. The Greenworks manual warns against household detergents, acids, alkalines, bleaches, and solvents in the pump. Rinse the deck well after detergent use, since dried soap can leave streaks on the boards.

How do I prepare a deck before stripping?

Prepare a deck by clearing it, sweeping it, and inspecting the boards before you start the washer. Remove furniture, planters, and loose items, then sweep away leaves and grit. Look for loose boards, raised nails, and soft spots, and fix what you can before water and force reach those areas. Cover nearby plants and outlets as needed.

Conclusion

Pick the washer that matches your deck size, finish condition, and power access, then start with a wide fan tip and a test spot. The gas models here suit large decks with old finish, while the electric models suit smaller decks near an outlet. With the right nozzle and steady passes, a deck can be ready for its next coat.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.