Updated Nov 17, 2026· 15 min read

Key takeaways

  • Five newly announced liquid coolers are rolling out now. Compare NZXT Kraken, Ocypus, and MSI specs, limits, and case fit before you plan your own next build.

Choosing a new liquid cooler is hard when the most interesting models are still reaching shops. Best PC water coolers coming soon covers five newly announced all-in-one units, with clear specs, honest limits, and practical advice for builders who want to plan a build around a fresh release and avoid a poor fit.

Quick verdict

The NZXT Kraken Plus 360 RGB suits builders who want a display and a simple install, while the two Kraken Core models suit builders who want a plain pump cap and a direct connection. The Ocypus model suits collectors, and the MSI model suits mainstream builds.

Product Type Best for Key spec Main limit
NZXT Kraken Plus 360 RGB 360 mm AIO Display builds 1.8-inch screen at 60 Hz Rollout timing varies by region
NZXT Kraken Core 360 360 mm AIO Simple builds Single-frame fan on one cable Black only
NZXT Kraken Core 420 420 mm AIO Large cases Three 140 mm fans in one frame Black only
Ocypus Omega L36 Ultra Eng Limited 360 mm AIO Collector builds 2.8-inch circular display Limited to 200 units worldwide
MSI PRO CoreLiquid R13 360 360 mm AIO Mainstream builds M6 pump with 50,000-hour expected life Regional availability is not stated

How we selected

We selected models from manufacturer announcements and reputable launch coverage published in November 2026. Each model had a named launch or rollout statement on a page we opened, with published specs from the maker or a launch report based on maker material.

We focused on all-in-one liquid coolers that were newly announced, newly listed, or still rolling out to shops at the time of writing. We did not include older models that have been on sale for months, and we did not include prototypes with no named retail model.

Best PC water coolers coming soon

These five models share one trait: each was announced in November 2026 or was still rolling out when this guide was written. Read the launch timing for each model, then match radiator size, display choice, and socket support to your case and board before you buy.

NZXT Kraken Plus 360 RGB

The NZXT Kraken Plus 360 RGB is the display model in the new Kraken range. The maker launched it on November 10, 2026, and states that availability is rolling out to authorized retailers worldwide over the coming months, with timing that varies by region and shop.

This cooler is for builders who want a screen on the pump and a tidy install. The maker describes a 1.8-inch screen that fills the pump cap edge to edge and runs at 60 Hz. The screen can show an image, a GIF, or a live readout, and its orientation is adjustable in software, so it stays upright however the block is mounted. Custom images, GIFs, live system info, and web integrations are set in NZXT CAM.

The maker lists an Asetek Gen 9 pump working against a copper cold plate, with a suspended impeller that keeps vibration from reaching the case. The cold plate measures 60 x 60 mm. The radiator is aluminum and measures 394 x 120 x 27 mm. Tubing is 420 mm long, made from EPDM with a nylon braided sleeve. Thermal paste is pre-applied to the cold plate.

The included fan is one F360 RGB single-frame fan, rated at 500 to 2,400 RPM, with a tolerance of plus or minus 240 RPM, on a fluid dynamic bearing. The maker presents it as one unit, with two cables to route rather than three fans to mount, and lighting across the whole frame. That design can cut cable clutter, but it also means the fan unit is a single linked part rather than three separate fans.

Socket support covers Intel LGA 1954, LGA 1851, LGA 1700, LGA 1200, and LGA 115X, plus AMD AM5 and AM4. The cooler comes in black or white. The maker lists a 6-year warranty for the Kraken Plus and Kraken Core. Asetek describes the same pump family as its Ingrid Mainstream Gen9 platform, and lists typical acoustic levels below 18 dB(A) for that platform.

  • Pros: display on the pump cap, single-frame fan, broad socket support, pre-applied paste.
  • Cons: rollout timing varies by region, display needs NZXT CAM, single-frame fan is one linked unit.

Buy if you want a 360 mm cooler with a customizable display, broad socket support, and a simple fan layout. Skip if you need a cooler at once, if you do not want display software, or if your case lacks a 360 mm radiator mount.

NZXT Kraken Core 360

The NZXT Kraken Core 360 is the plain version of the new Kraken range. The maker launched it on November 10, 2026, with the same rollout note as the Plus model: availability is rolling out to authorized retailers worldwide over the coming months, with timing that varies by region and shop.

This cooler is for builders who want liquid cooling without a screen to manage. The maker describes it as the version with nothing to manage, with a semi-transparent cap that reveals concentric rings layered inside rather than printing a pattern on the outside. The magnetic NZXT logo face piece offers 4-way orientation, so it can sit upright in any mount.

The maker lists an Asetek Gen 9V pump, built to run quiet, with a pump design that keeps vibration from reaching the case. The cold plate is copper and measures 60 x 60 mm. The radiator is aluminum and measures 394 x 120 x 27 mm. Tubing is 420 mm long, made from EPDM with a nylon braided sleeve. Thermal paste is pre-applied, and the cooler connects direct to the motherboard.

The fan is a single-frame static pressure fan, with three 120 mm fans on the 360 model, on one cable, on a fluid dynamic bearing. The maker states that there are no hubs and no controllers. That layout suits a clean build, but it also means the fan set is handled as one frame, so a builder should check case clearance for the full frame before planning a top mount.

Socket support covers Intel LGA 1954, LGA 1851, and LGA 1700, plus AMD AM5 and AM4. The maker lists the Kraken Core 360 and 420 in black only. The maker lists a 6-year warranty for the Kraken Plus and Kraken Core. Asetek describes the Gen 9V pump as part of its Ingrid Value Gen9V platform, and lists typical acoustic levels below 22 dB(A) for that platform.

  • Pros: plain pump cap, single-frame fan on one cable, direct motherboard connection, broad socket support.
  • Cons: black only, no display, rollout timing varies by region.

Buy if you want a simple 360 mm cooler with a clean cap, one fan cable, and no display software to set up. Skip if you want a display, a white cooler, or a cooler that is already widely stocked in your region.

NZXT Kraken Core 420

The NZXT Kraken Core 420 is the larger plain model in the new Kraken range. The maker launched it on November 10, 2026, and states that availability is rolling out to authorized retailers worldwide over the coming months, with timing that varies by region and shop.

This cooler is for builders with a large case that can take a 420 mm radiator. The maker states that the Kraken Core comes in 360 mm and 420 mm, in black, with the same cap, pump, and cold plate on both. That shared design makes the choice between the two models a question of case space and fan size, not a different pump or cap.

The maker lists an Asetek Gen 9V pump, with a pump design that keeps vibration from reaching the case. The cold plate is copper and measures 60 x 60 mm. The radiator is aluminum and measures 454 x 142 x 30 mm. Tubing is 460 mm long, made from EPDM with a nylon braided sleeve. Thermal paste is pre-applied, and the cooler connects direct to the motherboard.

The fan is a single-frame static pressure fan, with three 140 mm fans on the 420 model, on one cable, on a fluid dynamic bearing. The maker states that there are no hubs and no controllers. A 420 mm radiator needs a case with three 140 mm fan positions in one location, and the thicker 30 mm radiator needs extra clearance for the fan frame and tubing.

Socket support covers Intel LGA 1954, LGA 1851, and LGA 1700, plus AMD AM5 and AM4. The maker lists the Kraken Core 360 and 420 in black only. The maker lists a 6-year warranty for the Kraken Plus and Kraken Core. The cap uses concentric rings under a semi-transparent cap, and the magnetic NZXT logo face piece offers 4-way orientation.

  • Pros: larger radiator, same pump and cap as the Core 360, single-frame fan on one cable, direct connection.
  • Cons: needs a 420 mm mount, black only, no display, rollout timing varies by region.

Buy if your case has a clear 420 mm mount, you want a plain pump cap, and you want the larger radiator in this range. Skip if your case only takes a 360 mm radiator, if you want a display, or if you want a white cooler.

Ocypus Omega L36 Ultra Eng Limited

The Ocypus Omega L36 Ultra Eng Limited is a limited 360 mm liquid cooler. The maker announced its global launch with availability starting November 10, 2026, through select global hardware retail partners and regional distributors, with only 200 units worldwide.

This cooler is for collectors and showcase builders who want a rare part and a moving pump design. The maker describes an industry-first dynamic thermal system, with an automated mechanism that directs extra airflow directly over the motherboard VRM. Under high thermal loads, the top display module lifts while side aluminium panels extend, forming a dedicated intake channel.

An internal high-static-pressure fan activates within the newly created channel, directing cool air straight across VRM heatsinks. Active trigger temperatures can be fully configured through the proprietary Ocypus Display software, allowing users to balance silent desktop operation with maximum dynamic thermal response. That moving design is the main appeal, and it is also the main risk, because it adds motors, panels, and software to a part that is usually fixed.

The maker lists a 2.8-inch IPS circular display with a resolution of 480 x 480. The display supports custom MP4 video playback, animated GIFs, real-time hardware monitoring, screen recording, theme downloads, and customizable CPU temperature thresholds for dynamic expansion.

The maker lists a micro-channel copper cold plate, with precision micron-scale micro-grooves that maximize coolant contact area directly over CPU hot-spots. The pump uses a full-ceramic bearing architecture, with high-hardness ceramic shafts and sleeves, driving the pump up to 3,100 RPM, with a tolerance of plus or minus 10 percent, while maintaining operation below 27 dB(A) as stated by the maker.

The included fan is an integrated 360 mm ARGB fan, named Sigma F36 ARGB, with a suspended halo hub lighting system and frame light bars, paired with FDB bearings. The maker lists 82.5 CFM airflow and noise levels of 36 dBA or less. An included speed-control cable allows users to switch fan speed from 500-2200 RPM to 500-1900 RPM for silent-priority scenarios.

  • Pros: rare limited run, moving VRM airflow design, large circular display, numbered badge and metal shell.
  • Cons: limited to 200 units, moving parts add complexity, display needs Ocypus software, socket support is not stated on the launch page.

Buy if you collect limited hardware, you want a showcase cooler with a moving pump design, and you can find one of the 200 units. Skip if you need a widely stocked cooler, if you want a simple fixed design, or if you need stated socket support before you buy.

MSI PRO CoreLiquid R13 360

The MSI PRO CoreLiquid R13 360 is a newly introduced 360 mm all-in-one liquid CPU cooler. Launch coverage dated November 15, 2026, states that MSI has introduced the model, with early availability noted in China and no regional availability stated for other markets in the source announcement.

This cooler is for mainstream builders who want a plain 360 mm liquid cooler with a long pump life claim and a simple look. The maker positions it in the PRO range, which suits work and everyday gaming builds rather than showcase builds with a large display. It has no large screen on the pump, so there is less software to set up.

The maker lists an aluminum radiator measuring 27 mm thick, with a 20-fin-per-inch density, paired with three 12025-format fans arranged in a daisy-chain configuration. The radiator is 360 mm long, so it needs three 120 mm fan positions in the case, plus clearance for the radiator and tubing. The maker lists nylon-braided EPDM tubing and a rotating ARGB top cover on the pump housing.

The rotating cover allows the lighting element to be oriented after installation, which can help align it with a case layout. The maker also includes an offset mounting bracket for AMD processors. Such mounts shift the contact area relative to the socket center. MSI does not publish measured temperature improvements for this bracket in the source announcement, so its presence should be treated as a mounting feature rather than a quantified performance claim.

The cooler uses MSI custom M6 pump, which the maker rates for an expected service life of 50,000 hours. That figure is a maker expectation rather than an independently measured lifespan. The maker lists a 3-year warranty and two color options, black and white. Socket support covers Intel LGA 1851 and LGA 1700, plus AMD AM5 and AM4.

  • Pros: plain PRO design, daisy-chain fans, rotating ARGB cover, AMD offset mount, black and white options.
  • Cons: regional availability is not stated, fan and noise specs are not published, pump speed and flow are not published.

Buy if you want a simple 360 mm MSI cooler, you like the daisy-chain fan layout, and you can wait for local stock and full specs. Skip if you need full fan and noise specs now, if you want a display, or if you need a cooler with stated availability in your region.

Buying guide

Use this guide to match a new cooler to your case, board, and habits. Radiator size, display choice, socket support, and rollout timing matter more than a pump name alone, and each choice has a clear trade-off that affects fit, comfort, and daily use.

Match the radiator to your case first

Radiator size is the first filter, because a cooler that does not fit cannot be fixed with software. A 360 mm radiator needs three 120 mm fan positions in one mount, and a 420 mm radiator needs three 140 mm fan positions in one mount. Check the case manual for each mount, not just the front panel.

Plan around coming soon water coolers

Coming soon water coolers need a different plan from models that are already widely stocked. NZXT states that the Kraken Plus and Kraken Core are rolling out over the coming months, with timing that varies by region and shop. MSI has not stated regional availability for the R13 360 in the source announcement. Ocypus lists only 200 units worldwide.

Do not order a case, board, or fan set that only works with one new cooler until you have a firm local stock date. Keep a fallback cooler in mind with the same radiator size and socket support. That fallback lets you finish the build if the new model slips, and it gives you a clear comparison if the new model arrives on time.

Choose a display or a plain pump cap

A display adds a focal point and a software task. The NZXT Kraken Plus 360 RGB has a 1.8-inch screen at 60 Hz, set in NZXT CAM. The Ocypus Omega L36 Ultra Eng Limited has a 2.8-inch circular display at 480 x 480, set in Ocypus Display software. Both screens can show images, GIFs, or live readouts, but both need software and a USB connection.

A plain cap is simpler. The NZXT Kraken Core models use a semi-transparent cap with concentric rings and a magnetic logo face piece. The MSI PRO CoreLiquid R13 360 uses a rotating ARGB top cover. Neither needs display software, and neither adds a screen that can distract from the rest of the build.

Check socket support before you order parts

Socket support is a hard limit, and it differs between models in this guide. The NZXT Kraken Plus 360 RGB supports Intel LGA 1954, LGA 1851, LGA 1700, LGA 1200, and LGA 115X, plus AMD AM5 and AM4. The NZXT Kraken Core models support Intel LGA 1954, LGA 1851, and LGA 1700, plus AMD AM5 and AM4.

The MSI PRO CoreLiquid R13 360 supports Intel LGA 1851 and LGA 1700, plus AMD AM5 and AM4. The Ocypus launch page does not state socket support, so builders should not assume it covers a given board. Ask the maker or check the full product page for socket support before you buy.

Think about tubing, fans, and cable routing

Tubing length and fan format decide how clean a build looks and how easy it is to service. The NZXT Kraken Plus 360 RGB uses 420 mm tubing. The Kraken Core 360 uses 420 mm tubing, and the Kraken Core 420 uses 460 mm tubing. The MSI PRO CoreLiquid R13 360 uses nylon-braided EPDM tubing, with a length that is not stated in the source announcement.

Single-frame fans cut cable count. The NZXT Kraken Plus 360 RGB uses one F360 RGB single-frame fan, with two cables to route. The Kraken Core models use a single-frame static pressure fan on one cable, with three 120 mm fans on the 360 and three 140 mm fans on the 420. The MSI model uses three 12025-format fans in a daisy-chain layout, which also cuts cables but links the fans together.

Wait for regional rollout details

Regional rollout details are the last check before you spend on a new cooler. A maker can announce a global launch while shops in your region still wait for stock. NZXT states that timing varies by region and shop, and that the Kraken models are rolling out over the coming months. That note is a clear signal to check local listings.

For the MSI PRO CoreLiquid R13 360, the source announcement does not state regional availability, so builders outside China should not assume a local date. For the Ocypus Omega L36 Ultra Eng Limited, the maker lists select global hardware retail partners and regional distributors, with only 200 units worldwide, so local stock may be very limited.

FAQ

These answers cover the launch timing, install, display choice, case fit, and waiting plan for the five models in this guide. Each answer uses only the facts stated on the pages we opened, and notes where a maker has not stated a detail yet for buyers.

When will the best PC water coolers coming soon arrive in my region

Arrival timing differs by model and region, and no single date covers all five coolers. NZXT launched the Kraken Plus 360 RGB, Kraken Core 360, and Kraken Core 420 on November 10, 2026, and states that they are rolling out to authorized retailers worldwide over the coming months, with timing that varies by region and shop.

Are these new coolers hard to install

Install difficulty depends on radiator size, fan format, and display setup, not on the cooler name alone. NZXT describes the Kraken Plus 360 RGB as ready in minutes, with thermal paste pre-applied and universal mounting for current Intel and AMD sockets. The Core models also list pre-applied paste and a direct connection.

Do I need a display on a liquid cooler

No, a display is an option, not a need. The NZXT Kraken Plus 360 RGB and the Ocypus Omega L36 Ultra Eng Limited have displays, while the NZXT Kraken Core models and the MSI PRO CoreLiquid R13 360 do not. A display can show an image, a GIF, or live system info, but it adds software and a USB connection.

Can a 420 mm radiator fit a mid tower case

A 420 mm radiator can fit some mid tower cases, but many mid tower cases only take a 360 mm radiator. The NZXT Kraken Core 420 uses a radiator that measures 454 x 142 x 30 mm, with three 140 mm fans in one frame. That size needs three 140 mm fan positions in one mount, plus clearance for the fan frame and tubing.

What should I do while I wait for a launch

Use the waiting time to plan the build, not to guess at specs. Measure your case for a 360 mm or 420 mm radiator, confirm socket support for your board, and check RAM and motherboard clearance for a top mount. List a fallback cooler with the same radiator size and socket support.

Conclusion

The Kraken Plus 360 RGB is the pick for display builds, the Kraken Core models are the pick for simple builds, and the MSI R13 360 is the pick for mainstream buyers who can wait for local stock. Check your case, socket, and local stock first before you commit to any new cooler in this guide at all now.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.