Key takeaways
- Five Serato DJ Pro mixers and controllers compared, from the club-standard DJM-A9 to the stems RANE FOUR, with activation, license and DVS details for each.
Quick verdict
Short on time? The RANE FOUR is the most complete Serato controller here, activating Serato DJ Pro and Pitch ‘n Time with dedicated Stems controls. The DJM-S5 is the value battle mixer that activates both Serato DJ Pro and DVS, with no extra license needed for either one.
The DDJ-REV7 adds motorized platters, the DDJ-FLX10 covers four decks with track separation, and the DJM-A9 is the club-standard mixer for DJs who already hold a license.
| Product | Type | Channels | Serato DJ Pro | Serato DVS | Standout feature |
|---|---|---|---|---|---|
| Pioneer DJ DJM-A9 | Club mixer | 4 | License required | Supported, license required | Dual USB, 32-bit conversion |
| RANE FOUR | Controller | 4 | Activates free | DVS-enabled | Dedicated Stems controls |
| Pioneer DJ DDJ-REV7 | Controller | 2 | Activates free | Paid upgrade | Motorized 7-inch jog wheels |
| Pioneer DJ DJM-S5 | Battle mixer | 2 | Activates free | Activates free | MAGVEL FADER PRO, USB powered |
| Pioneer DJ DDJ-FLX10 | Controller | 4 | Activates free | Paid license | Track Separation controls |
How we selected these mixers for serato dj
Every model here was checked on its maker’s published Serato terms first, because the licensing decides what you actually get on day one. Hardware that activates Serato DJ Pro runs the full software when plugged in; supported hardware like the DJM-A9 works with Serato DJ Pro and its DVS feature only alongside a license or subscription you provide.
Products were verified from manufacturer copy and full specification listings opened during research, and only current models were included. That rule removed the Denon DJ X1850 PRIME, a strong club mixer on paper, because a major dealer now lists it as discontinued. Straight rekordbox-only hardware was also left out: everything here runs Serato DJ Pro as a primary platform, with DVS support noted model by model because the terms differ.
The five mixers for serato dj in detail
Two of the five are true mixers that take external decks and turntables; three are controllers with the decks built in. What unites them is the Serato integration: pads, effects and displays that talk to the software directly, and audio interfaces that carry the program to the laptop and back without extra boxes.
Pioneer DJ DJM-A9
The DJM-A9 is the current club-standard 4-channel mixer from Pioneer DJ, and the one model here that treats Serato as a guest rather than a host. It works with rekordbox, Serato DJ Pro and djay Pro, and supports DVS control in all three, but Serato DJ Pro requires a license or subscription that you bring yourself.
The sound path is the headline: ESS Technology 32-bit A/D converters in the channel input section and 32-bit D/A converters at the master and booth outputs, a frequency response of 20 Hz to 40 kHz on line inputs, a signal-to-noise ratio of 114 dB on USB and digital inputs, and THD of 0.005 percent. The third-generation MAGVEL FADER crossfader and reworked channel faders handle mixing and scratching, and the Sound Color FX gain an industry-first Center Lock that stops the knob at its center point.
Fourteen Beat FX are controlled from a color display and a horizontal X-Pad, with a Multi I/O section offering true send and return for external effects. Two microphone inputs include phantom power, a first on a DJ mixer per Pioneer DJ, plus three mic effects and a dedicated reverb. Dual sets of USB Type-B and Type-C ports connect two PCs or Macs at once for back-to-back sets, a Bluetooth input routes phone audio to any channel, and two independent headphone outputs let two DJs cue at the same time during changeovers. Inputs run to four digital, four line and four phono, with master outputs on XLR and RCA, a booth output and a digital master output. The mixer measures 407.4 x 458.3 x 107.9 mm and weighs 10.2 kg.
- Pros: the club-standard layout most venues and riders expect; 32-bit conversion and dual USB for changeovers; DVS support across three software platforms; dual headphone outputs and a phantom-powered mic input
- Cons: Serato DJ Pro and its DVS need your own license or subscription; the largest and heaviest unit here; no performance pads, since it expects external decks
Buy if: you play clubs and festivals on shared rigs, already hold a Serato license, and want the mixer every other DJ knows. Skip if: you want the hardware to include the software, where the four license-included devices below are better value.
RANE FOUR
The RANE FOUR is a 4-channel controller built around Serato Stems. It is DVS-enabled and activates both Serato DJ Pro and Serato Pitch ‘n Time when connected to a laptop running the latest Serato version, so the software side is settled the moment you plug in.
Stems control is hardware, not a menu: a dedicated Stems pad mode, independent Acapella and Instrumental buttons, and the exclusive STEM-SPLIT feature, which splits a track’s acapella and instrumental across two deck layers. The internal FX engine provides 22 paddle-triggered Main FX and four knob-controlled Channel FX, and you can switch between the hardware FX and Serato’s software FX. Eight OLED displays above the performance pads show pad functions, cue and loop names and stem elements, so your eyes stay off the laptop.
The 8.5-inch capacitive jog wheels carry central color displays showing playhead position, BPM, key, waveform overview and loop size. Sixteen performance pads (eight per deck, nine modes each) and the MAG FOUR tension-adjustable crossfader complete the performance side. The mixer section adds two external line/phono inputs for decks 3 and 4, two combo XLR/TRS microphone inputs, sampler routing to a dedicated knob or to channel 4, and dual USB ports. Cirrus Logic converters run 24-bit at 48 kHz with dynamic range of 113 dB on both ADC and DAC, and THD+N of 0.004 percent. Outputs include XLR and RCA mains and a 1/4-inch booth; the unit measures 782 x 404 x 107 mm and weighs 8.27 kg.
- Pros: activates Serato DJ Pro and Pitch ‘n Time; the deepest hardware Stems control on this list; DVS-enabled with external inputs for turntables; pad OLED displays reduce laptop watching
- Cons: static rather than motorized jog wheels; a wide, heavy controller that needs a full-size desk or case; only two external inputs, on decks 3 and 4
Buy if: your sets lean on Stems, acapella blends and four-deck layering inside Serato. Skip if: you want motorized platters or a separate mixer with your own decks.
Pioneer DJ DDJ-REV7
The DDJ-REV7 is a 2-channel battle controller that recreates a DJM-S mixer plus PLX turntable setup in one unit. Its hardware activates Serato DJ Pro when plugged in, giving free use of the software, with a voucher for the Serato Pitch ‘n Time DJ Expansion Pack in the box; Serato DVS control is a paid upgrade.
Each deck has a motorized 7-inch jog wheel (207 mm platter) with the rotational stability of a 12-inch turntable, low and high torque settings, two included slip sheets per deck, switchable 33 1/3 or 45 rpm rotation and a Stop Time setting for power-down effects. A 3.5-inch On Jog Display in each wheel shows waveforms, the Serato virtual deck, artwork or a custom logo. The battle layout puts horizontal tempo sliders at the top of the deck sections and the performance pads in the mixer section with Lever FX paddles.
The MAGVEL FADER PRO crossfader offers feeling and curve adjustment. Twenty-two built-in Beat FX (including Duck Down, Fill Out and Helix Out) fire from the levers in bursts or locked on, alongside five Sound Color FX and up to six Serato software effects. Instant Scratch buttons trigger four built-in scratch samples even with no laptop connected, and Scratch Bank loads your own samples from Serato DJ Pro. The soundcard runs 24-bit at 48 kHz with a USB signal-to-noise ratio of 110 dB. Inputs cover two phono/line pairs, two microphones and an aux; outputs are XLR and RCA masters, a booth output and two headphone jacks, with dual USB B ports for two laptops. It measures 732 x 382.2 x 82.4 mm and weighs 10.7 kg.
- Pros: real motorized platters with torque and slip-sheet tuning; activates Serato DJ Pro with Pitch ‘n Time included; Instant Scratch works without a laptop; authentic battle layout with pads in the mixer section
- Cons: Serato DVS costs extra on top; two channels only; the heaviest controller here at 10.7 kg
Buy if: you scratch and want turntable feel with Serato DJ Pro included in a single case. Skip if: you need four channels or free DVS.
Pioneer DJ DJM-S5
The DJM-S5 is a 2-channel scratch mixer that strips the battle formula down to the parts that matter. Its spec sheet states the Serato position plainly: the mixer activates Serato DJ Pro, and its DVS control is activated too, with no extra license for either program.
Both run free when the mixer is plugged into a PC or Mac, which makes it the only model here besides the RANE FOUR whose DVS carries no extra license.
The MAGVEL FADER PRO crossfader with Feeling Adjust is the same fader family as the flagship DJM-S11, visible through a transparent window in the gloss red top plate. Two large effect levers, also shared with the S11, control up to 57 effects in Serato DJ Pro including paid expansion packs, held for bursts or locked on, with two banks for favorites. Four performance pads per deck (20.6 x 20.6 mm each) cover 13 pad modes including Hot Cue, Roll, Saved Loop and Sampler.
Two features teach scratching rather than just allowing it. Scratch Cutter applies one of six cutting patterns to a track in time with the other deck when you move the control vinyl, emulating the transformer technique without touching the crossfader, and Crossfader Hot Cue restarts a track from its last Hot Cue each time the fader leaves the edge. The S5 is also the first Pioneer DJ mixer powered over USB: two USB Type-C ports (one for the computer, one for power only) draw 5 V at 500 mA, and it still works as a standalone analog mixer for real vinyl. Channels offer trim, 3-band EQ and a filter knob; inputs are two line/phono pairs, an aux and a combo XLR/TRS mic; outputs are an XLR master, an RCA booth/master and two headphone jacks. Signal-to-noise is 108 dB on USB with THD of 0.003 percent, and the mixer measures 245 x 363.5 x 107.9 mm at 3.4 kg.
- Pros: activates Serato DJ Pro and Serato DVS with no extra license; MAGVEL FADER PRO and full-size FX levers from the flagship line; USB bus power for portable turntable setups; Scratch Cutter helps new scratch DJs learn timing
- Cons: four pads per deck where rivals offer eight; most effects live in Serato, with only the channel filter working standalone; no booth EQ or second USB computer connection
Buy if: you want a real battle mixer for Serato DVS with turntables and no license fees at all. Skip if: you need four channels, eight pads per deck, or hardware effects that work without the laptop.
Pioneer DJ DDJ-FLX10
The DDJ-FLX10 is a 4-channel performance controller that activates both rekordbox and Serato DJ Pro without a subscription, and includes a Serato Pitch ‘n Time DJ voucher. For Serato users the catch sits one level down: DVS support comes through a paid license or subscription to Serato DJ Expansions or Serato DJ Suite.
Its signature is Track Separation, Pioneer’s take on stems. Dedicated color-coded buttons and a multicolored jog ring manage three parts of each track: vocals, drums and instruments. Active Part and Part Iso adjust or mute each part, FX Part Select applies effects to one part only, such as echo on the vocal, and Part Instant Doubles sends a single part to another deck for scratching. In Serato DJ Pro these controls drive Serato Stems from the hardware.
Full-size jog wheels carry On-Jog Displays with four modes (Deck Info, Waveform, Artwork and DJ Logo), and the evolved MAGVEL FADER uses a four-sensor system for finer crossfader control. Mix Point Link can start the next track automatically at a linked point, and a 3-pin DMX output drives lighting directly from rekordbox. Eight multicolor, velocity-sensitive pads sit on each deck. The 4-channel mixer section has a built-in soundcard running 24-bit conversion with a USB signal-to-noise ratio of 110 dB and THD of 0.002 percent, four stereo RCA inputs (two line/phono switchable), two microphone inputs, XLR and RCA master outputs, booth outputs and both headphone jack sizes, plus dual USB-C ports. It measures 71.6 x 40.1 x 7.4 cm and weighs 6.7 kg.
- Pros: activates Serato DJ Pro and rekordbox alike; Track Separation gives per-part volume, mute and effects from the surface; full-size jogs with displays and a four-sensor crossfader; the lightest 4-channel option here
- Cons: Serato DVS needs a paid expansion or suite subscription; jog wheels are touch-sensitive rather than motorized; some display modes, such as 3-band waveforms, are rekordbox only
Buy if: you play four decks, move between Serato and rekordbox, and want stems control without the RANE’s size. Skip if: DVS with turntables is central to your setup and you do not want a subscription.
Buying guide: choosing mixers for serato dj
Serato hardware looks similar on a shelf and behaves very differently on the invoice and in the booth. The points below cover the checks that matter before the music starts: licensing, DVS terms, controller or mixer format, and the performance controls you will actually touch.
Built-in license versus supported hardware
A device with the license built in, like the RANE FOUR, REV7, S5 and FLX10 here, switches on the full Serato DJ Pro while it is connected, with no license to manage. Supported hardware, like the DJM-A9, is fully mapped and DVS-capable but needs a Serato DJ Pro license or subscription from you.
Neither is better in the abstract: a built-in license suits a personal rig, supported suits venues and DJs who already hold licenses.
Check the DVS terms separately
DVS rarely follows the same rule as the main software. On this list alone, the DJM-S5 activates Serato DVS free, the RANE FOUR is DVS-enabled as part of its activation, the REV7 charges for DVS as an upgrade, the FLX10 wants an expansion or suite subscription, and the A9 needs the full license first.
If turntables or CDJs with control signals are in your future, price the DVS path before choosing.
Mixer or controller
A controller carries its decks inside, so one case holds the whole rig, decks included, and the laptop does all the playback work. A mixer like the A9 or S5 needs external players or turntables but keeps working with real vinyl and other sources when the laptop closes.
Battle DJs lean mixer-plus-turntables or the REV7’s motorized middle ground; open-format and mobile DJs usually gain more from a four-channel controller.
Stems and track separation controls
Serato Stems changed what the hardware needs to offer. The RANE FOUR gives stems a pad mode, dedicated acapella and instrumental buttons and STEM-SPLIT; the FLX10 answers with per-part volume, isolation and effects through Track Separation. If your sets are built on live acapella blends, dedicated controls beat software shortcuts.
If stems are an occasional trick instead, standard pads and the software’s own controls are enough, and the money is better spent on channels or platters.
Changeovers and second laptops
Back-to-back sets and shared bills punish single-USB hardware. The A9, FOUR, REV7 and FLX10 all provide dual computer connections so the next DJ plugs in before you unplug, and the A9 adds dual headphone outputs so both DJs can cue during the swap. Solo performers can ignore this; residents and battle hosts cannot.
FAQ
Questions that come up whenever Serato licensing meets hardware, answered from the makers’ published terms for the five models above. They cover what happens to the software when the hardware is unplugged, which models charge extra for DVS, and which of the five also run rekordbox.
What does a built-in Serato license mean?
It means the device itself carries the license: connect a RANE FOUR, DDJ-REV7, DJM-S5 or DDJ-FLX10 and Serato DJ Pro runs in full, with no separate license or subscription, for as long as the hardware is plugged in. Disconnect it and the software returns to its unlicensed state until another activating device or a license appears.
Does the DJM-A9 include Serato DJ Pro?
No. The DJM-A9 supports Serato DJ Pro and its DVS feature, but Pioneer DJ states that Serato DJ Pro requires a license or subscription bought separately. The mixer does include its rekordbox support without that step, which is why so many A9 rigs run rekordbox by default.
Which of these mixers include Serato DVS for free?
The DJM-S5 activates Serato DVS outright, and the RANE FOUR is DVS-enabled under its Serato DJ Pro activation. The DDJ-REV7 treats DVS as a paid upgrade, the DDJ-FLX10 needs a Serato DJ Expansions or Suite subscription, and the DJM-A9 needs the Serato license that also covers its DVS feature.
Can I use these with rekordbox as well?
Two of them, yes. The DJM-A9 and DDJ-FLX10 both run rekordbox as a primary platform, and the FLX10 activates it without a subscription. The RANE FOUR, DDJ-REV7 and DJM-S5 are Serato-first designs; the REV7 and S5 are built entirely around Serato DJ Pro.
Do I still need a laptop with a controller?
Yes. All three controllers here, and both mixers when running Serato, play music from Serato DJ Pro on a connected computer; none of them loads tracks from USB drives by itself. The REV7’s Instant Scratch samples are the exception that proves the rule, since those four sounds are built into the hardware.
Conclusion
For most Serato DJs, the RANE FOUR is the strongest of these mixers for serato dj use: the full license built in, DVS-enabled, and stems hardware that matches the software. Battle DJs should choose between the DJM-S5 with turntables or the motorized DDJ-REV7, four-deck players get the DDJ-FLX10, and licensed club DJs get the DJM-A9.