Updated Nov 17, 2026· 18 min read

Key takeaways

  • Compare leading makers of CPU liquid coolers by radiator size, fan speed, display, socket support and noise, so you can pick the AIO that fits your build well.

Picking the best manufacturer of water coolers cpu builds is less about one logo and more about radiator size, fan design, pump layout and socket support. This guide compares six current 360 mm AIO coolers from six makers using published specifications, so you can match a cooler to your CPU, your case and the noise level you can live with.

Quick verdict

Six makers, six 360 mm AIO coolers, and no single winner for every build. The table below sums up each cooler in one line, so you can shortlist by display, radiator thickness, fan speed and socket support before reading the full notes on each model in this guide.

Product Type Best for Key spec Main limit
Corsair iCUE LINK H150i LCD 360 mm AIO with LCD Display-led show builds 2.1-inch IPS LCD, fans to 2,400 RPM No airflow or noise figures on the page opened
NZXT Kraken Elite 360 RGB 360 mm AIO with LCD Clean builds with live data 2.72-inch IPS LCD, 75.12 CFM fan array Single-frame fan array fixes the fan layout
ARCTIC Liquid Freezer III 360 A-RGB 360 mm AIO, no pump display Quiet builds and VRM airflow 38 mm radiator, VRM fan Thick radiator needs extra clearance
Lian Li Galahad II LCD SL-INF 360 360 mm AIO with LCD Display builds with matched fans 2.88-inch IPS LCD, pump to 3,600 RPM No fan speed or airflow figures on the page opened
DeepCool LT720 360 mm AIO, no pump display High airflow and wide socket support Fans to 2,250 RPM, 85.85 CFM Fans carry no lighting
Thermaltake TH360 V2 Ultra ARGB Sync 360 mm AIO with LCD Display and lighting on a slim radiator 2.1-inch LCD, 57.05 CFM fans Display setup needs a USB header and Windows

How we selected the best CPU water cooler manufacturers

This guide draws only on published specifications and maker descriptions from pages opened during research, plus reputable review pages that restate those specifications. It ranks makers by what their cooler offers on paper, not by hands-on use, so fit and published limits carry the most weight.

The shortlist covers six different makers, one 360 mm AIO cooler each, so the comparison stays about the manufacturer and its design choices rather than about one brand repeated six times. Every cooler here is a current all-in-one liquid cooler with a pre-filled loop, a pump built into the CPU block, three 120 mm fans and a 360 mm radiator. The differences that matter are radiator thickness, fan speed and airflow, pump speed, display size, tube length and socket support. Where a page does not state a figure, the article says so instead of filling the gap.

CPU water coolers by manufacturer

Each cooler below comes from a different maker, and each one takes a different approach to the same job: moving heat from the CPU to a 360 mm radiator. Read the fit notes first, since radiator thickness and tube length decide whether a model works in your case at all.

Corsair pairs a 360 mm radiator with a 2.1-inch IPS LCD on the pump and three QX120 RGB fans, aiming at builders who want a bright display and tidy cabling through the iCUE LINK hub. It suits show builds and high-end CPUs, but the display and hub add setup steps a plain cooler avoids.

Corsair is the maker for builders who treat the pump as a small screen. The maker lists a 2.1-inch IPS LCD with 480×480 resolution, a 600 cd/m2 backlight, 24-bit true color depth and over 16.7 million colors. The three QX120 RGB fans run at speeds up to 2,400 RPM with 34 RGB LEDs per fan, and a split-flow copper cold plate sits under pre-applied XTM70 thermal paste. The maker lists an included iCUE LINK System Hub and support for 0 RPM PWM signals that allow the fans to stop entirely at low temperatures. Socket support on the page opened covers Intel LGA 1700 and AMD AM5.

The limits are about information and added complexity. The page opened does not state fan airflow, static pressure, noise level or radiator dimensions, so buyers who compare coolers on those figures will find less to work with here. The LCD and the hub also mean more software and more cables to plan than a cooler with no display.

  • Bright 2.1-inch IPS LCD with 480×480 resolution and 16.7 million colors
  • QX120 RGB fans reach 2,400 RPM with 34 LEDs per fan
  • Split-flow copper cold plate with pre-applied XTM70 paste
  • iCUE LINK hub and hidden radiator connections cut cable clutter
  • Page opened gives no airflow, static pressure or noise figures
  • Display and hub add software and cabling steps
  • Radiator dimensions are not stated on the page opened

Buy if you want a pump display, strong RGB lighting and one hub for fan and pump control.

Skip if you want a plain cooler with no display or hub, or if you compare coolers on published airflow and noise figures.

NZXT Kraken Elite 360 RGB

NZXT builds the Kraken Elite 360 RGB around a 2.72-inch IPS display, a Turbine pump and a single-frame fan array, which cuts cable clutter to one 8-pin connector. It fits builders who want a clean look with live system data on the pump and a single cable for all three fans.

NZXT gives this cooler the largest display in this guide. The maker lists a 69 mm, 2.7-inch IPS display at 640×640 px, with a 60 Hz refresh rate, 690 cd/m2 brightness and 16.7 million colors, plus a dynamic RGB ring. The NZXT Turbine pump runs from 1,200 to 2,800 RPM over a copper cold plate. The cooler ships with one F360 RGB Core Fan, a single-frame array of three 120 mm fans measuring 360 x 120 x 26 mm. The maker lists fan speed from 500 to 2,400 RPM, airflow of 75.12 CFM, static pressure of 3.3 mmH2O, noise of 30.0 dBA and a lifespan of 60,000 hours, with one 8-pin connector for PWM and RGB. The radiator measures 401 x 120 x 27 mm in aluminum, tubing runs 420 mm, and the maker lists a 6-year warranty.

The main limit is the single-frame fan array itself. Because the three fans share one frame, you cannot space them apart or replace one fan on its own, and the 26 mm fan thickness plus the 27 mm radiator needs a case with room for that combined depth. The display also depends on NZXT CAM software for pump and fan speeds, LCD content and lighting sync.

  • Large 2.72-inch IPS LCD at 640×640 px and 60 Hz
  • Single-frame fan array with one 8-pin cable for PWM and RGB
  • Turbine pump from 1,200 to 2,800 RPM on a copper cold plate
  • Fan airflow of 75.12 CFM at 30.0 dBA, per the maker
  • Three fans share one frame and cannot be spaced apart
  • Display and fan control depend on NZXT CAM software
  • Radiator plus 26 mm fan frame needs a roomy 360 mm mount

Buy if you want the biggest pump display in this guide and one cable for three fans.

Skip if you want separate fans you can replace one at a time, or a cooler that runs with no maker software.

ARCTIC Liquid Freezer III 360 A-RGB

ARCTIC takes a practical route: a thicker 38 mm radiator, a VRM fan on the pump block, an Intel contact frame and MX-6 paste in the box. It suits builders who value quiet running and socket-area airflow over a pump display, and who have the case room for a thick radiator.

ARCTIC is the maker for builders who would rather spend the budget on cooling hardware than on a screen. The radiator measures 398 x 120 x 38 mm in aluminum, thicker than the 27 mm and 30 mm radiators in this guide, and the review page notes that the thicker radiator can support higher thermal loads at low fan speeds. Three P12 PWM PST A-RGB fans run from 200 to 2,000 rpm with airflow of 48.82 cfm and static pressure of 1.85 mmH2O. The pump runs from 800 to 2,800 rpm, the cold plate is copper with micro skived fins, and tube length is 450 mm. The pump block carries a VRM fan that runs from 400 to 2,500 rpm across the voltage converters and socket area. The box includes an Intel contact frame for LGA1700, a 5 mm AMD offset mount and MX-6 paste at 0.8 g. The cooler weighs 1,870 g, compatibility covers Intel LGA1700 and AMD AM5 and AM4, and the maker lists a 6-year warranty.

The limits are about fit and installation. A 38 mm radiator plus fans needs more clearance than a 27 mm radiator, and the review page warns that some cases, even standard ATX cases, may lack room. The Intel contact frame installs in one fixed orientation and needs the stock retention assembly removed, which exposes the socket pins. An LGA1200 or LGA115x mounting kit is sold separately.

  • Thick 38 mm radiator for low fan speeds
  • VRM fan cools the socket area from 400 to 2,500 rpm
  • Intel contact frame and 5 mm AMD offset mount included
  • MX-6 paste, 0.8 g, included in the box
  • No pump display at all
  • 38 mm radiator needs extra case clearance
  • Contact frame install removes the stock retention assembly
  • LGA1200 and LGA115x mounting kit sold separately

Buy if you want a thick radiator, a VRM fan and an Intel contact frame in the box, with the case clearance to fit it.

Skip if your case is tight on clearance, if you want a pump display, or if you want a cooler that mounts without removing the stock Intel retention frame.

Lian Li Galahad II LCD SL-INF 360

Lian Li combines a 2.88-inch IPS LCD with an Asetek 8th Gen pump and pre-installed UNI FAN SL-INF fans, plus a 45-degree tube fitting that turns a full circle. It suits builders who want a display and matched fans without routing a bundle of cables in a build with a window.

Lian Li is the maker for builders who want the display and the fans to look like one matched set. The maker lists a 2.88-inch IPS LCD with 480×480 resolution, 500 nits brightness and 24-bit full color, controlled through L-Connect 3 with screen recording and screen capture for custom images and video. The Asetek 8th Gen pump uses a three-phase motor that runs up to 3,600 RPM, with a square copper cold plate and two ARGB LED strips beside the screen. Three UNI FAN SL-INF 120 mm fans come pre-installed, and the fan controller is built into the pump. The maker lists a 30 mm thick aluminum radiator with single-wave fins at 20 FPI, and the 45-degree tubing connector allows 360-degree rotation. Tube length is 385 mm, paste is pre-applied with an extra tube included, and the maker lists a 6-year warranty.

The limits are about missing figures and software dependence. The page opened does not state fan speed, airflow, static pressure or noise level for the SL-INF fans, so buyers who compare on those figures will need the maker listing for the fan set. The display needs a USB Type-C cable to a motherboard 9-pin USB header, and the screen, lighting and fan curves all run through L-Connect 3. The 385 mm tubes are shorter than the 420 mm, 450 mm and 460 mm tubes on other coolers here.

  • Large 2.88-inch IPS LCD at 480×480 and 500 nits
  • Asetek 8th Gen pump up to 3,600 RPM
  • Pre-installed UNI FAN SL-INF fans with controller in the pump
  • 45-degree fitting with 360-degree tube rotation
  • Page opened gives no fan speed, airflow or noise figures
  • Display and curves depend on L-Connect 3 software
  • 385 mm tubes are the shortest in this guide

Buy if you want a large pump display, matched SL-INF fans and flexible tube routing.

Skip if you compare coolers on published fan figures first, or if your case needs long tubes.

DeepCool LT720

DeepCool uses its own 4th generation dual-chamber pump rather than a shared pump design, with three FK120 fans and an infinity mirror on the block. It suits builders who want strong airflow and wide socket support, including older Threadripper mounts.

DeepCool is the maker for builders who care most about the pump and the fans. The review page lists the LT720 as a 360 mm AIO with a 402 x 120 x 27 mm aluminum radiator, a 4th generation in-house pump at 3,100 RPM plus or minus 10 percent, and a copper base with pre-applied paste. Pump noise is listed at 19 dBA. Three FK120 fans measure 120 x 120 x 25 mm and run from 500 to 2,250 RPM plus or minus 10 percent, with airflow up to 85.85 CFM, air pressure of 3.27 mmAq and noise up to 32.9 dBA on fluid dynamic bearings. Net weight is 1,856 g, and the maker lists a 5-year warranty. Socket support is the widest here: Intel LGA2066, 2011-v3, 2011, 1700, 1200, 1151, 1150 and 1155, plus AMD sTRX4, sTR4, AM5 and AM4. The pump block carries an ARGB infinity mirror.

The limits are about noise, light and orientation. The fans reach up to 32.9 dBA at full speed, and the review page lists a loud fan note at full speed as a drawback, so quiet-first builders should plan a gentler fan curve. The FK120 fans in this cooler carry no lighting, so the only light comes from the infinity mirror on the pump block. The review page also notes the maker advises fitting the block with the tubes coming from the bottom, in the 6 o-clock position.

  • Own 4th generation dual-chamber pump at 3,100 RPM
  • Fan airflow up to 85.85 CFM, the highest in this guide
  • Widest socket list, including sTRX4 and sTR4
  • Pre-applied paste and a 5-year warranty listed by the maker
  • Fans reach up to 32.9 dBA at full speed
  • Fans carry no lighting, only the pump mirror lights up
  • Maker advises tubes from the bottom for best performance

Buy if you want high airflow, a distinct in-house pump and wide socket support.

Skip if you want lit fans, the quietest full-speed running, or a block with no preferred tube position.

Thermaltake TH360 V2 Ultra ARGB Sync

Thermaltake fits a 2.1-inch TFT-LCD into the TH360 V2 Ultra ARGB Sync and pairs it with three CT120 ARGB fans and a slim 27 mm radiator. It suits builders who want a display and lighting on a cooler that fits medium to large cases with room for a 360 mm mount.

Thermaltake is the maker for builders who want a display without a thick radiator. The maker lists a 2.1-inch TFT-LCD with 480×480 resolution that can show real-time information, photos and video, plus local time and weather, and a 27 mm slim radiator with a thickened 20 mm copper chamber. The pump runs from 1,500 to 3,300 RPM on PWM at 12 V with a power input of 5.16 W, and the water block is copper. Three CT120 ARGB fans measure 120 x 120 x 25 mm and run from 500 to 1,800 RPM, with airflow of 57.05 CFM per fan, static pressure of 2.23 mm-H2O and noise of 25.8 dB-A. Tube length is 460 mm in rubber, the longest in this guide, and the radiator measures 396 x 120 x 27 mm in aluminum. Socket support covers Intel LGA 2066, 2011-3, 2011, 1700, 1200, 1156, 1155, 1151 and 1150, plus AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2 and FM1.

The limits are about display setup and missing information. The display connects through a Micro USB to USB 9-pin interface, and the maker lists system compatibility as Windows 10 and 11, so the screen features depend on that link and that operating system. The page opened does not state a warranty term, so buyers who weigh warranty length cannot compare this cooler with the 5-year and 6-year terms listed for other coolers here. Fan speed tops out at 1,800 RPM.

  • 2.1-inch TFT-LCD with 480×480 resolution
  • Slim 27 mm radiator with a 20 mm copper chamber
  • Longest tubes in this guide at 460 mm
  • Wide socket list across Intel and older AMD boards
  • Display needs a Micro USB to USB 9-pin link and Windows 10 or 11
  • Page opened states no warranty term
  • Fan speed tops out at 1,800 RPM

Buy if you want a pump display, ARGB fans and long tubes on a slim radiator.

Skip if you run an operating system outside Windows 10 and 11, or if warranty length decides it for you.

Buying guide

A CPU water cooler is a fit problem before it is a brand problem. Radiator size, tube length, socket support and fan control decide whether a cooler works in your build, and the maker differences only matter once those four points line up, so start with the fit.

Measure your case for a 360 mm radiator in the best manufacturer of water coolers cpu

A 360 mm radiator needs a mount for three 120 mm fans in a row, plus room for the radiator thickness and the fans on top of it. The coolers here range from 27 mm thick to 38 mm thick before fans, so a case that fits a slim radiator may still struggle with a thick one near the motherboard or the memory.

Measure the mount length as well as the depth, since the NZXT radiator runs 401 mm long and the DeepCool radiator runs 402 mm long, while the ARCTIC radiator runs 398 mm long. A front mount may need longer tubes: Thermaltake tubes run 460 mm and ARCTIC tubes run 450 mm, while Lian Li tubes run 385 mm. Confirm the radiator does not press against tall memory or a large M.2 heatsink.

Match the cooler to your CPU socket in the best manufacturer of water coolers cpu

Socket support is a hard limit, since a cooler that lacks your socket cannot be fitted at all. All six coolers here cover Intel LGA 1700 and AMD AM5 and AM4, which covers most current mainstream builds, but the lists split beyond that point, so check the full list for your board.

DeepCool and Thermaltake cover older sockets such as LGA 2011 and AMD AM3, while ARCTIC covers LGA1700 only on the Intel side as sold, with an LGA1200 and LGA115x kit sold separately, and NZXT adds LGA 1851. Mounting effort also differs: NZXT lists tool-free mounting brackets and pre-applied paste, while ARCTIC asks the builder to remove the stock Intel retention assembly to fit its contact frame, which exposes the socket pins.

What to look for in a manufacturer of CPU water coolers

A maker shows its priorities in the parts it chooses. Corsair and NZXT put a display and a software hub at the center, ARCTIC puts a thicker radiator and a VRM fan first, DeepCool builds its own pump, Lian Li matches the fans to the display, and Thermaltake pairs a display with a slim radiator and long tubes.

None of those choices is right for every build, so judge the maker by the parts that match your build: display size if you want a screen, radiator thickness if you want low fan speeds, fan airflow if you run a hot CPU, and tube length if your case is large. Support matters too: NZXT, ARCTIC and Lian Li list 6-year warranties where the page opened states a term, DeepCool lists 5 years, and the Corsair and Thermaltake pages opened state no term.

Weigh display features against noise and cables

A pump display adds a screen, a cable and a software app to every build. The Corsair, NZXT, Lian Li and Thermaltake coolers in this guide all carry a display from 2.1 inches to 2.88 inches, and each one needs its own software for full control of the screen and the lighting.

That is a fair trade for a build with a window and a builder who enjoys customizing a screen, but it is dead weight in a closed case or a build where the owner wants no extra software running. Noise figures need the same care: makers list fan noise from 25.8 dB-A for Thermaltake to 30.0 dBA for the NZXT fan array and up to 32.9 dBA for DeepCool at full speed, but those figures come from different test setups and cannot be ranked as if they shared one lab.

Plan tubing, fan headers and software

Count the cables and headers before the cooler arrives. Most AIO coolers here need a pump header, a fan header or a hub, and a USB header for the display, while ARGB models also need a 3-pin ARGB header or a controller. Check that your board has a spare USB 2.0 header for the display.

NZXT cuts the cabling to one 8-pin connector for its fan array plus a breakout cable set, Lian Li builds the fan controller into the pump, and Corsair routes parts through its iCUE LINK System Hub. Each display cooler has its own app, and running two maker apps for two different parts can cause clashes, so builders who already run one lighting app may prefer a cooler from the same maker family or a cooler with no display at all.

FAQ

These answers cover the points buyers ask most often about AIO CPU coolers and the makers behind them, using only published specifications and the fit notes above, so you can settle common doubts before you buy. Each answer points back to the specifications in the product sections.

Which manufacturer of CPU water coolers is best for a first build

There is no single best maker for a first build, because the right pick depends on your case, your socket and how much setup you want. A first-time builder who wants the fewest steps should favor a cooler with pre-applied paste, pre-installed fans and tool-free brackets, such as the NZXT Kraken Elite 360 RGB.

A first-time builder who wants a display should pick one app and learn it, rather than mixing apps from two makers. Measure the case first and confirm the socket before you open the box.

Do all 360 mm AIO coolers fit the same cases

No, and the differences are larger than the shared 360 mm label suggests. Radiator length runs from 396 mm for Thermaltake to 402 mm for DeepCool, radiator thickness runs from 27 mm to 38 mm, and fan thickness adds about 25 mm on top, or 26 mm for the NZXT single-frame array.

Tube length also varies from 385 mm for Lian Li to 460 mm for Thermaltake, which decides whether a front mount can reach the CPU block. A case that lists 360 mm support still needs the depth for the radiator plus fans, and the mount must clear memory and heatsinks near the socket.

Does a thicker radiator always cool better

A thicker radiator gives more surface for heat to leave the coolant, but it does not cool better on its own. The ARCTIC radiator at 38 mm thick is the thickest in this guide, and the review page notes that it can support higher thermal loads at low fan speeds, yet the fans still need enough airflow to push air through the extra depth.

A slim 27 mm radiator with strong fans, such as the DeepCool LT720 with fans up to 85.85 CFM, can move plenty of air in a case with good airflow. Judge the radiator together with the fans, the pump speed and the case airflow, and remember that a thick radiator that does not fit your case cools nothing at all.

What does a VRM fan do on an AIO cooler

A VRM fan is a small fan on the pump block that blows air across the voltage regulators and the CPU socket area on the motherboard. The ARCTIC Liquid Freezer III 360 A-RGB carries one that runs from 400 to 2,500 rpm, and it helps in builds where the CPU cooler no longer blows air down onto the board.

That matters because most AIO coolers move air through the radiator at the case edge instead of down onto the socket, so the area around the CPU can run warm under heavy load. A VRM fan suits boards with large voltage regulators under heavy load, but it adds a small fan and a cable.

How long should an AIO cooler last

There is no single lifespan for an AIO cooler, and the maker pages opened here do not state one. What they do state is a warranty term: NZXT, ARCTIC and Lian Li list 6 years, DeepCool lists 5 years, and the Corsair and Thermaltake pages opened state no term.

NZXT also lists a fan lifespan of 60,000 hours for its F360 RGB Core Fan. A cooler lasts longest when the pump runs at a steady speed, the fans stay clean, the tubes are not kinked and the radiator is kept free of dust. Keep the mounting hardware and the manual, since a move to a new socket may need a kit from the maker.

Conclusion

The best maker here is the one whose cooler fits your case, your socket and your taste for displays and software. NZXT leads on screen size, ARCTIC leads on radiator depth, DeepCool leads on airflow, and the rest trade display, tubes and socket range. Measure first, then pick the maker that matches.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.