Key takeaways
- Compare five compact kitchen sinks for campervan builds by stated overall size, bowl depth, cabinet minimum, drain size and included parts from maker pages.
A campervan galley leaves a short counter run and a shallow cabinet, so a household sink rarely fits. This roundup compares kitchen sinks for campervan builds by the numbers the makers publish: overall size, bowl depth, cabinet minimum, drain opening and included parts, so a sink can be matched to the cabinet before a cut is made.
Quick verdict
Four of the five picks are topmount designs that drop into a cutout from above, which suits thin campervan countertops, and one is a lidded inset sink built for vehicle galleys. The Ruvati workstation models add a ledge with sliding accessories, the Dometic adds a glass lid that closes the bowl into worktop, and the Elkay is the shallow option.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Ruvati RVH8215 | Topmount workstation | Square 15 inch cabinets | 15 x 15 inches, 9 inch depth | Bowl is 11-1/2 x 11 inches |
| Ruvati RVH8210 | Topmount workstation | Longer, narrower counters | 15 x 20 inches, 10 inch depth | Needs an 18 inch cabinet |
| Ruvati RVH8221 | Topmount workstation | Bigger campervan galleys | 21 x 20 inches, 10 inch depth | Needs a 24 inch cabinet |
| Dometic VA8006 | Inset sink with glass lid | Counters that double as worktop | 420 x 440 mm footprint | Tap is sold separately |
| Elkay BLGR1515 | Drop-in bar sink | Shallow bowls and small drains | 15 x 15 inches, 2 inch drain | Pads on the bottom only |
How we selected
Each sink below was selected from a manufacturer specification sheet or a manufacturer product information document that states the overall dimensions. Overall size is the first filter for a campervan, because the counter run and the cabinet below it are fixed by the vehicle layout, and a sink that overhangs either one cannot be fitted at all.
The second filter was installation type. Topmount and inset sinks sit in a cutout and are held by clips or a seal, so they work on the thin countertop panels used in most conversions. The third filter was the stated drain size, since campervan plumbing often uses smaller waste fittings than household plumbing. Every dimension, gauge figure and included part in this article comes from the opened maker documents for that model.
Compact kitchen sinks for campervan galleys compared
The five sinks split into two groups. The three Ruvati models are workstation sinks with an accessory ledge, published with imperial dimensions and cabinet minimums. The Dometic is a galley sink published in millimeters with a folding glass lid, and the Elkay is an 18 gauge drop-in with a 2 inch drain. Read the footprint first, then the bowl.
Ruvati 15 x 15 inch Workstation Drop-in Topmount Bar Prep RV Sink 16 Gauge Stainless Steel – RVH8215
The RVH8215 is the square option in the Ruvati workstation line, with an exterior of 15 by 15 inches and a stated minimum cabinet of 18 inches. The maker lists it as a topmount sink for bar prep and RV use, built from true 16 gauge T304 stainless steel, with a single-tier ledge inside the bowl that holds the included accessories above the basin.
The bowl measures 11-1/2 by 11 inches with a depth of 9 inches, and the bottom is slanted with drain grooves that channel water toward the center drain. The drain hole is 3-1/2 inches. The maker lists heavy duty sound guard padding and undercoating on the underside, plus rounded inside corners. The box includes mounting clips, a colander, a rinse grid, a basket strainer, a cutting board and a cut-out template, and the listing states a limited lifetime warranty from Ruvati USA. The sheet lists cUPC certification by IAPMO and compliance with ASME A112.19.3 and CSA B45.4.
The accessory set is itemized on the sheet: the colander is model RVA1315, the rinse grid is RVA1215, the basket strainer is RVA11048 and the cutting board is RVA68215. Those part numbers matter when a piece is lost on the road, since a replacement can be ordered by number rather than by description.
- Pros: square 15 inch footprint, deep 9 inch bowl, full accessory set in the box, 16 gauge steel
- Cons: 11-1/2 inch bowl width limits pan size, needs an 18 inch cabinet for a 15 inch sink
- Buy if: your galley cabinet is at least 18 inches wide and you want prep accessories included
- Skip if: you need to soak wide pans flat, or your cabinet is under 18 inches
Ruvati 15 x 20 inch Workstation Drop-in Topmount Bar Prep RV Sink 16 Gauge Stainless Steel – RVH8210
The RVH8210 stretches the workstation format along the counter: the exterior is 15 by 20 inches, still with a stated minimum cabinet of 18 inches. It is a topmount model in true 16 gauge T304 stainless steel with an 18/10 chromium and nickel content and a commercial brushed finish, per the maker sheet, and the corners are a zero radius design.
The bowl measures 13 by 14-1/2 inches and runs 10 inches deep, a full inch deeper than the square RVH8215. The drain sits at the rear center with a 3-1/2 inch hole, which moves the waste fitting toward the back of the cabinet. The maker lists sound guard padding, a slanted bottom with drain grooves and a single-tier accessory ledge. Included in the box are a colander, a cutting board, a rinse grid, a basket strainer, mounting clips and a cut-out template.
The sheet itemizes that set as colander RVA1310, cutting board RVA1210, rinse grid RVA68210 and basket strainer RVA1025. The zero radius corners give the bowl a squared shape that matches the ledge accessories, and the maker lists the same slanted bottom with drain grooves as the smaller square model.
- Pros: 10 inch bowl depth, rear center drain frees cabinet front space, 16 gauge steel
- Cons: 20 inch length needs a long counter run, zero radius corners need more wiping
- Buy if: your counter is long and narrow and you want the deepest bowl in this group
- Skip if: your counter run is under 20 inches, or you prefer rounded bowl corners
Ruvati 21 x 20 inch Workstation Drop-in Topmount Bar Prep RV Sink 16 Gauge Stainless Steel – RVH8221
The RVH8221 is the largest sink in this roundup, with an exterior of 21 by 20 inches and a stated minimum cabinet of 24 inches. It suits bigger campervan galleys where the counter can take a 21 inch sink. The maker builds it from true 16 gauge T304 stainless steel with an 18/10 chromium and nickel content and a commercial brushed finish.
The bowl measures 19 by 14-5/8 inches at 10 inches deep, with sharp corners and a rear center drain with a 3-1/2 inch hole. Sound guard padding, a slanted bottom and a single-tier ledge are listed, and the box includes a colander, a cutting board, a rinse grid, a basket strainer, mounting clips and a cut-out template. The sheet lists cUPC certification by IAPMO. At this size the sink behaves like a small household workstation sink that happens to mount from the top.
The accessory set is itemized as colander RVA1310, cutting board RVA1221, rinse grid RVA68221 and basket strainer RVA1025. The sheet lists the same 18/10 chromium and nickel content and commercial brushed finish as the 15 by 20 inch model, so the step up from that model is size rather than a different build or finish.
- Pros: widest bowl in the group at 19 inches, 10 inch depth, full accessory set included
- Cons: needs a 24 inch cabinet, sharp corners collect residue, largest counter cut of the five
- Buy if: your conversion has a 24 inch or wider galley cabinet and full-size washing needs
- Skip if: cabinet space is tight, since this model gives back the room the smaller picks save
Dometic VA8006 Square Sink with Glass Lid
The VA8006 is the one sink here designed from the start for vehicle galleys. Dometic lists it as a square inset sink in stainless steel with a heat-resistant glass lid that folds down, turning the sink into extra worktop when it is closed. For a campervan counter that is also the prep surface, that lid is the deciding feature of this model.
The stated footprint is 420 by 440 millimeters with a depth of 146.5 millimeters and a net weight of 3 kilograms, the lightest published figure in this group. The maker describes a low profile bench mount with a rubber seal, a tap hole of 39 millimeters, and the tap fitting mounted inside the sink unit. The sink is designed for the DW-WT02 tap, which is sold separately. Dometic states a warranty of 3 years for this model, and the reference number is 9600029460.
The maker document describes the tap fitting as mounted inside the sink unit, which keeps the deck line clear for the folding lid. Because the matched tap is a separate purchase sized to the 39 millimeter hole, the plumbing plan for this sink starts with the DW-WT02 tap the document names, not with a standard household faucet.
- Pros: lid converts the bowl into worktop, light 3 kg build, compact square footprint
- Cons: tap sold separately, dimensions published only in millimeters, least deep bowl here
- Buy if: counter space matters more than bowl depth and you want a lid over the sink
- Skip if: you need a deep bowl for large cookware, or a tap included in the purchase
Elkay Lustertone Classic Stainless Steel 15 x 15 x 6-1/2 inch Single Bowl Drop-in Bar Sink – BLGR1515
The BLGR1515 is the plain, shallow option: a 15 by 15 inch drop-in bar sink in 18 gauge 304 stainless steel with a Lustrous Satin finish. Elkay states a minimum cabinet of 18 inches and a cutout of 14-3/8 by 14-3/8 inches. It is the lightest-duty build in this group on paper, and also the simplest, with no ledge and no accessory bundle.
The bowl measures 11-1/2 by 11-1/2 inches at 6-3/8 inches deep, the least deep bowl in the roundup, which can suit a cabinet with limited height below the counter. The drain is at the rear right and takes a 2 inch drain size, smaller than the 3-1/2 inch standard on the Ruvati models, so it pairs with compact waste fittings. Sound treatment is pads on the bottom only. Mounting hardware is included for countertops up to 3/4 inch thick, and the sheet lists ADA and ICC A117.1 compliance plus ASME A112.19.3 and CSA B45.4, with IAPMO listing.
Elkay lists the mounting hardware as Part 64090008, rated for countertops up to 3/4 inch thick. The compliance lines on the sheet are the ones a builder converting a van for an owner with mobility needs will look for first, since the ADA and ICC A117.1 headings are printed on the specification rather than added by a listing.
- Pros: shallow bowl fits low cabinets, 2 inch drain suits compact plumbing, hardware included
- Cons: 18 gauge steel is thinner than the Ruvati models, bottom pads only, no accessories listed
- Buy if: vertical room under the counter is the limit and you want a simple drop-in
- Skip if: you want a deep bowl or a 3-1/2 inch drain to match standard fittings
Buying guide
A campervan sink purchase turns on fit before features. The cabinet, the counter thickness and the waste fitting size are all fixed by the conversion, so the buying order below starts with the stated footprint and cabinet minimum, then moves to bowl depth, drain size, steel gauge and the parts in the box.
Start with the stated footprint and cabinet minimum
Every maker states an overall size and a minimum cabinet size, and the two numbers differ: a 15 inch sink can need an 18 inch cabinet. Measure the inside of the galley cabinet, then compare it with the stated minimum, not with the sink width alone. Elkay publishes a 14-3/8 by 14-3/8 inch cutout for its 15 inch sink.
Counter run is the other fixed limit. The RVH8221 needs 21 inches of width plus working room around the rim, while the square RVH8215 and BLGR1515 need 15 inches. In a short galley, those 6 inches are usually the difference between a sink that fits beside a cooktop and one that does not.
Bowl depth against cabinet height
Bowl depth in this group runs from 6-3/8 inches on the Elkay to 10 inches on the two larger Ruvati models. A deeper bowl holds more and splashes less, but it also hangs lower into the cabinet, where campervan builders keep a water tank, a heater or drawer storage. Check the stated depth against the clear height under the counter before choosing.
The Dometic states its depth as 146.5 millimeters, the smallest depth figure in the group, and pairs it with a lid. A shallow bowl with a lid can be the right trade in a van where the counter doubles as the only prep surface, even though large pans will not sit flat in it.
Drain size and position
Four of the five sinks use a 3-1/2 inch drain opening, and the Elkay uses a 2 inch drain. Campervan waste systems often use smaller hose and compact traps, so the stated drain size decides how much adapting the plumbing needs. Rear and rear center drains move the trap toward the back of the cabinet and leave the front freer for storage.
The Ruvati RVH8210 and RVH8221 place the drain at the rear center, the Elkay places it at the rear right, and the RVH8215 uses a center drain. None of these pages state a strainer thread or trap size beyond the drain opening, so match the basket strainer in the box to the waste fitting before the install day.
Gauge, finish and sound treatment
The Ruvati models are 16 gauge T304 steel, and the Elkay is 18 gauge 304. A lower gauge number means thicker steel, which is the figure to compare when two sinks are otherwise close. Finishes are a commercial brushed finish on the Ruvati sheets and Lustrous Satin on the Elkay sheet; both are names for satin-type surfaces, not performance ratings.
The Dometic document does not state a steel gauge at all; it lists stainless steel, a net weight of 3 kilograms and a warranty of 3 years. Where a maker publishes no gauge, the honest comparison is weight and warranty term, not a guessed thickness figure.
Sound treatment is stated plainly on each sheet. Ruvati lists sound guard padding with undercoating on its workstation models, while Elkay lists pads on the bottom only for the BLGR1515. In a small vehicle cabin, running water and dishes are close to the sleeping area, so the stated padding coverage is worth weighing.
What is in the box
Included parts change the real scope of a purchase. The Ruvati workstation sinks include a colander, a cutting board, a rinse grid, a basket strainer, mounting clips and a cut-out template. The Elkay includes mounting hardware for countertops up to 3/4 inch thick. The Dometic includes the glass lid, while its matched tap is sold separately.
Templates matter in a conversion because the counter is often cut once, on site. A paper template in the box, as Ruvati lists, or a published cutout size, as Elkay lists, lets the cut be marked from the maker figures instead of from the sink rim.
FAQ
Most campervan sink questions come down to cabinet size, drain size and how the sink mounts on a thin counter. The answers below use only the figures the makers state for the five models above, plus general fitting practice that applies to any drop-in install in a vehicle galley.
What size are most kitchen sinks for campervan builds?
The compact end is a 15 by 15 inch footprint, used by both the Ruvati RVH8215 and the Elkay BLGR1515, with stated cabinet minimums of 18 inches. Longer counters take the 15 by 20 inch RVH8210, and the Dometic VA8006 states a 420 by 440 millimeter footprint. There is no standard size; the stated overall dimensions of the model decide the fit.
Can a topmount sink work on a thin campervan counter?
Topmount sinks are held by clips under the rim, and the makers state the counter thickness their hardware covers. Elkay lists mounting hardware for countertops up to 3/4 inch thick with the BLGR1515, which covers the plywood panels used in many conversions. The Ruvati sheets include mounting clips in the box.
Do kitchen sinks for campervan galleys need a special drain?
The drain opening is the figure to match. Four sinks state a 3-1/2 inch opening and take basket strainers, several of which are included in the box. The Elkay BLGR1515 states a 2 inch drain for compact waste fittings. The makers do not state trap or hose sizes, so the waste run has to be planned around the stated opening and the strainer supplied.
Is a lidded sink worth it in a campervan?
The Dometic VA8006 is the lidded model: its glass lid folds down to convert the sink into worktop, per the maker document. On a short counter that is also the prep area, a closed lid returns the 420 by 440 millimeter footprint to use. The trade is bowl depth, stated at 146.5 millimeters, and a tap that is sold separately and mounts inside the unit.
The lid also changes the plumbing layout: because the tap fitting mounts inside the unit, per the maker document, no faucet stands on the counter behind the sink, which keeps the closed lid line clear.
What does minimum cabinet size mean for a van build?
It is the smallest cabinet the maker states for the sink and its mounting hardware. In this group the 15 inch Ruvati and Elkay sinks state 18 inches, and the 21 inch Ruvati states 24 inches. The cabinet must clear the bowl depth and the drain assembly, so treat the stated minimum as the width figure and check the depth against the bowl.
Are the stated dimensions the same as the cutout?
No. The stated overall dimensions are the outside of the sink, and the cutout is smaller. Elkay publishes a 14-3/8 by 14-3/8 inch cutout for the 15 inch BLGR1515, and the Ruvati workstation sinks include a cut-out template. Marking from the overall size would leave the rim without support, so the template or the cutout is the figure to use.
Conclusion
For most campervan galleys, the Ruvati RVH8215 is the balanced pick: a 15 inch square footprint, a 9 inch bowl and a full accessory set on an 18 inch cabinet. Choose the Dometic VA8006 when counter space outranks bowl depth, and the Elkay BLGR1515 when cabinet height and a 2 inch drain decide the build.