Key takeaways
- Compare 7 commercial glass washers for bars, from compact underbar units to high output rotary models, with racks per hour, cycle times, water use, and fit.
A bar that runs out of clean glasses loses sales and slows service, so the washer under the bar has to keep pace with the crowd. This roundup compares seven commercial machines built for bar glassware, using published specifications for output, cycle time, and water use. The best glass washers for bars below suit different volumes and spaces.
Quick verdict
The seven models below cover the main ways bars wash glasses, and the right pick depends on hourly volume, available space, and the sanitizing method the venue can support. Compact underbar machines suit small bars, while rotary and high output models suit rooms that empty racks all night.
For a small bar with a narrow underbar gap, the Noble Warewashing HTGW is the most direct pick. It is 18 1/2 inches wide with a 120 second cycle, and the maker lists 22 racks per hour, or 792 glasses per hour, with 0.53 gallons of water per cycle. For a bar with only 115 volt power, the CMA GL-X lists 30 racks per hour. For wine bars, the CMA 181-GW offers 11-1/4 inches of clearance.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Noble Warewashing HTGW | High temperature underbar rack washer | Small bars with tight space | 22 racks per hour, 792 glasses per hour | Narrow 18 1/2 inch width, small racks only |
| CMA 181-GW | High temperature undercounter glasswasher | Wine bars and tall stemware | 30 racks per hour, 600 glasses per hour | Needs 208 or 240 volts and 33 to 36 amps |
| CMA GW-100 | Low temperature rotary undercounter glasswasher | Continuous hands-free washing | 1,000 glasses per hour | Low temperature method needs chemical sanitizer |
| Hobart LXNR-30 | High temperature undercounter glass washer | Bars that want modern controls | 30 racks per hour on light cycle, 0.62 gallons per rack | Heavier cycles drop output to 13 racks per hour |
| Jackson Delta 1200 | Rotary carousel glasswasher | High volume bars and clubs | 1,200 glasses per hour | Needs 208 to 230 volts and a 39 inch height |
| Jackson Delta 5-E | Low temperature door-type glasswasher | Busy bars that also wash dishes | 40 racks per hour, 1,440 glasses per hour | Low temperature method needs chemical sanitizer |
| CMA GL-X | Low temperature underbar glasswasher | Small bars on 115 volt power | 30 racks per hour on 115 volts | Uses 1.7 gallons of water per cycle |
How we selected
Selection started with published maker specification sheets and listing pages that could be opened and read in full. Each model had to be built for commercial glassware, sized for bar or undercounter use, and sold as a current model with stated output figures.
The shortlist was shaped by five factors: stated glasses or racks per hour, cycle time, water use, interior clearance for tall glasses, and power and drain needs. No hands-on testing is claimed here.
Best glass washers for bars in this roundup
The seven machines below span the main formats a bar can install: compact underbar rack washers, a rotary carousel washer, a hands-free rotary unit, and a door-type rack washer. Each section gives the stated output, the sanitizing method, and the limits that matter most during service.
Noble Warewashing HTGW high-temperature underbar model
The Noble Warewashing HTGW is the narrowest machine in this roundup. At 18 1/2 inches wide, 20 5/8 inches deep, and 28 1/8 inches high, it fits under a bar where a full width unit would not. The maker lists 304 stainless steel construction and an ETL listing.
Output is listed at 22 racks per hour, or 792 glasses per hour, on a 120 second wash cycle. Water use is listed at 0.53 gallons per cycle, the lowest per cycle figure here. The wash tank holds 4 gallons, the booster tank holds 1.1 gallons, and the wash pump motor is listed at 1/3 hp. Water temperature is listed at 140 to 180 degrees Fahrenheit.
Power is listed at 208 or 240 volts, 1 phase, 60 Hz, at 13.3 amps, with a NEMA 6-20P plug and a 6 foot power cord. Interior clearance is listed at 10 5/8 inches. The maker lists a built-in detergent and rinse aid dispenser, a built-in drain pump, and a booster heater, plus two flat 16 inch racks and a cutlery container.
The narrow width is also the main limit. Racks are 16 inch by 16 inch, smaller than the 19-3/4 inch by 19-3/4 inch racks used by several other models here, and interior clearance of 10 5/8 inches is the lowest in this roundup, so very tall stemware may not fit.
- Lowest water use per cycle here at 0.53 gallons
- Narrow 18 1/2 inch width fits tight spaces
- Built-in drain pump, detergent and rinse aid dispenser, and booster heater
- Small 16 inch racks hold fewer glasses per load
- Interior clearance of 10 5/8 inches limits tall glassware
- Only one wash cycle is listed
Buy if the bar has a narrow underbar gap and wants low water use. Skip if the bar serves many tall glasses or needs the larger standard racks used by the other machines here.
CMA 181-GW high-temperature undercounter model
The CMA 181-GW is a high temperature undercounter model aimed at bars that wash a lot of stemware and wine glasses. Its 11-1/4 inch height clearance is generous for an undercounter unit, and the maker notes a great application for the wine industry. The wash tank is listed as 16 gauge 304 stainless steel.
Output is listed at 30 racks per hour, or 600 glasses per hour, with 20 glasses per 19-3/4 inch by 19-3/4 inch rack. The total cycle time is listed at 2 minutes, made up of a 94 second wash, a 16 second rinse, and a 10 second dwell. Water use is listed at 0.75 gallons per cycle, and pump capacity is listed at 38 gallons per minute.
The sanitizing method is high temperature. The maker lists a booster heater capable of a 70 degree Fahrenheit rise, a 180 degree Fahrenheit final rinse, and wash temperatures of 155 to 160 degrees Fahrenheit. The wash pump motor is listed at 1 hp, and the electrical rating is listed at 208 or 240 volts, 1 phase, 60 Hz, at 33.0 or 36.0 amps.
The frame measures 24 inches wide, 25 inches deep, and 39 to 40 inches high, and shipping weight is listed at 207 lb. The maker lists top mounted controls, detergent and rinse chemical pumps, a fresh water rinse through upper and lower arms, and a built-in delime switch.
- High temperature final rinse listed at 180 degrees Fahrenheit
- 11-1/4 inch clearance suits tall stemware and wine glasses
- 30 racks per hour with a 2 minute total cycle
- Needs 208 or 240 volt power at 33 to 36 amps
- Gravity drain needs a floor drain location
- 39 to 40 inch height needs more vertical space
Buy if the bar serves wine and tall stemware and has 208 or 240 volt power. Skip if the bar has only 115 volt power or no floor drain nearby.
CMA GW-100 low-temperature rotary model
The CMA GW-100 works differently from the rack machines in this roundup. It is a rotary undercounter model with a circular conveyor, so staff place glasses on the conveyor and the machine moves them through washing and rinsing. The maker lists a hands-free glass activated on and off stop.
Output is listed at up to 1,000 2-1/2 inch glasses per hour, and height clearance is listed at 11-3/4 inches. The unit runs on 120 volts at 14.4 amps, with a built-in 1.5 kW electric tank heater that maintains wash water at the recommended 140 degree Fahrenheit wash temperature.
The sanitizing method is low temperature chemical sanitizing, and the maker lists compatibility with both iodine and chlorine sanitizers. The maker lists separate detergent, sanitizer, and rinse aid chemical pumps with primer switches, and internal chemical storage. The chamber is listed as all stainless steel, with a Poly Pro circular conveyor that the maker describes as durable and as reducing chipping and breakage of glassware.
The frame measures 25-1/4 inches wide, 25-1/8 inches deep, and 39 to 40-1/2 inches high, and shipping weight is listed at 187 lb. The maker lists upper and lower wash and rinse arms, a wash tank heater, and a drain tray.
- Hands-free glass activated start suits fast bar service
- Up to 1,000 glasses per hour without loading racks
- Runs on 120 volts at 14.4 amps
- Low temperature method needs a steady sanitizer supply
- Rotary conveyor suits glasses, not plates or mixed loads
- 39 to 40-1/2 inch height needs vertical clearance
Buy if bartenders need to wash glasses one at a time without loading racks. Skip if the bar also needs to wash plates or mixed loads in the same machine.
Hobart LXNR-30 high-temperature undercounter model
The Hobart LXNR-30 is the most control focused machine in this roundup. It is an Advansys undercounter unit with touchscreen controls and the SmartConnect app for service diagnostics. The maker describes Energy Recovery with steam elimination, which captures heat from water vapor and reduces visible steam.
Output is listed at 30 racks per hour on the light cycle, 24 on the normal cycle, and 13 on the heavy cycle. With an optional second level rack kit, output rises to 48 racks per hour. Water use is listed at 0.62 gallons per rack, and the chamber opening is listed at 17 inches.
The sanitizing method is high temperature, with a Sense-A-Temp booster and a fresh water rinse. The maker lists three selectable cycles, light, normal, and heavy, with a pot and pan cycle on the heavy setting. Other listed features include Complete Delime with notification, AutoClean, a pump drain, and automatic chemical priming.
The frame measures 23 15/16 inches wide, 26 3/4 inches deep, and 33 1/4 inches high. Power is listed at 120/208 volts, 60 Hz, 1 phase, at 23.7 amps, described as low amp at 30 amps. The unit accepts optional two-level racking.
- Three cycles let staff match wash length to soil level
- Touchscreen controls with SmartConnect app diagnostics
- Steam elimination and Energy Recovery reduce visible steam
- Heavy cycle output drops to 13 racks per hour
- Second level racking is an optional extra
- 26 3/4 inch depth needs a deeper undercounter space
Buy if the bar wants cycle choice, app diagnostics, and less visible steam. Skip if the bar wants the simplest controls or washes mostly heavily soiled loads.
Jackson Delta 1200 rotary carousel model
The Jackson Delta 1200 is a rotary carousel model built for high volume bars, clubs, and banquet rooms. Instead of racks, glasses ride a composite carousel conveyor through the wash and rinse zones, and the maker lists the carousel as a composite material that helps guard glassware against chipping and damage.
Output is listed at 1,200 glasses per hour, one of the highest glasses per hour figures here. Clearance is listed at 12 inches, which suits taller stemware, glasses, and mugs. The wash pump motor is listed at 1/10 hp, and the drive motor at 6.5 RPM.
Power is listed at 208 to 230 volts, 60 Hz, 1 phase, at 15.0 amps. Minimum hot water inlet temperature is listed at 130 degrees Fahrenheit, and minimum cold water inlet temperature at 75 degrees Fahrenheit. Hot and cold water inlet pressure range is listed at 15 to 25 PSI, with hot wash water use at 0.385 gallons per minute and cold rinse water use at 1.93 gallons per minute.
The frame measures 39 inches high, 25-1/4 inches wide, and 25-1/4 inches deep, and weight is listed at 210 lb. The maker lists stainless steel construction, a double-wall cabinet, wash and rinse temperature gauges, an adjustable rinse control, and three precision dispensers.
- 1,200 glasses per hour suits the busiest bars
- 12 inch clearance handles tall stemware and mugs
- Composite carousel helps guard glassware against chips
- Needs 208 to 230 volt power, not a standard outlet
- 39 inch height and 210 lb weight need a firm install plan
- Gravity drain needs a drain location
Buy if the bar moves more than a thousand glasses an hour at peak. Skip if the bar is small, has only 115 volt power, or needs one machine for dishes too.
Jackson Delta 5-E door-type model
The Jackson Delta 5-E is a door-type model that takes full racks of glasses, and it pairs high output with a compact layout. The maker guide lists it as one of two Jackson glasswashers, alongside the rotary Delta 1200, and notes that it is NSF rated as a dishwasher too, so it can also wash dinnerware and flatware.
Output is listed at up to 40 racks per hour, or 1,440 glasses per hour, the highest racks per hour figure here. Water use is listed at only 1.16 gallons per rack, and the cycle is listed at 90 seconds. Clearance is listed at 11 inches. The sanitizing method is a low temperature chemical sanitizing rinse, and the maker guide lists ENERGY STAR certification for the model.
The maker guide lists a sustainer heater that keeps wash water hot between cycles, and the unit includes two half-racks. Both Delta models are described as built from rugged stainless steel, with adjustable bullet feet.
The main limits follow from its format and method. Low temperature sanitizing needs a steady chemical supply and the right sanitizer concentration for each load, and a door-type rack machine needs floor space in front for loading. The maker guide does not list frame dimensions or power figures for this model, so those details need to be confirmed before ordering.
- Highest racks per hour here at 40 racks per hour
- 1,440 glasses per hour from a door-type rack machine
- Low water use at 1.16 gallons per rack
- Low temperature method needs chemical sanitizer on hand
- Door-type loading needs clear floor space in front
- Frame size and power figures were not listed in the pages opened
Buy if the bar needs the highest rack output in a door-type machine that can also wash dishes. Skip if the bar prefers high temperature sanitizing or has no room for rack handling.
CMA GL-X low-temperature underbar model
The CMA GL-X runs on 115 volt power, and that single fact makes it the easiest to install in many small bars. It is a low temperature chemical sanitizing undercounter model with a compact underbar footprint and a Works-in-a-drawer layout for easy service access.
Output is listed at 30 racks per hour. The total cycle time is listed at 120 seconds, made up of a 58 second wash, a 32 second rinse, and a 30 second dwell. Water use is listed at 1.7 gallons per cycle, and 51 gallons per hour. The wash pump motor is listed at 1 hp.
Power is listed at 115 volts at 16 amps. Minimum wash temperature is listed at 120 degrees Fahrenheit, and the maker lists a sustainer heater that provides continuous 130 degree Fahrenheit hot water every cycle. Maximum clearance for glassware is listed at 11-1/4 inches. The unit uses standard 19-3/4 inch by 19-3/4 inch racks.
The frame measures 24 inches wide, 24-3/4 inches deep, and 39 to 40-1/8 inches high, and shipping weight is listed at 202 lb. The maker lists upper and lower stainless steel wash arms, built-in chemical pumps and a deliming system, and a pumped drain that allows installation with no floor drain required.
- Runs on 115 volts at 16 amps, the simplest power need here
- 30 racks per hour with a 2 minute total cycle
- Pumped drain allows placement without a floor drain
- Uses 1.7 gallons of water per cycle, the highest here
- Low temperature method needs chemical sanitizer on hand
- 39 to 40-1/8 inch height needs vertical space
Buy if the bar has only 115 volt power and no floor drain. Skip if water use is a top concern or the bar wants high temperature sanitizing.
Buying guide
A bar glass washer is a working tool, not a showpiece, so the buying choice should start with the bar itself: how many glasses leave the bar in the busiest hour, how much space sits under the counter, and what power, water, and drain hookups already exist.
Match capacity to peak hour demand in the best glass washers for bars
Start with the busiest hour, not the average hour. Count the glasses served in a peak Friday or Saturday hour, then add a margin for spillage, extra rounds, and glasses that come back mid-service. A machine that lists 22 racks per hour can fall behind quickly if the bar serves more than that in a rush.
Listed output is a maximum under the maker’s stated conditions, so choose a machine with headroom above the peak hour, not one that only just meets it on paper.
High temperature or chemical sanitizing
High temperature machines sanitize with hot water, with a final rinse listed at 180 degrees Fahrenheit, and they need a booster heater to hold that temperature. Low temperature machines sanitize with a chemical sanitizer at lower wash temperatures, which can suit bars with limited hot water, but they need the right dose on every cycle.
High temperature units need descaling and booster care, while low temperature units need chemical level checks and pump priming, so ask the installer how each method fits the bar’s water hardness and hot water capacity.
Measure the underbar space first
Measure width, depth, and height at the install spot, including the door swing, the space needed to slide racks in and out, and clearance for the drain and water lines. The machines here range from 18 1/2 inches wide for the Noble HTGW to 25-1/4 inches wide for the CMA GW-100 and the Jackson Delta 1200.
Interior clearance matters as much as outside size, so bring the tallest glass the bar serves and test the fit against the listed clearance before ordering, and leave room for ventilation and service access.
Water, drain, and power needs
Check the three hookups before any machine is ordered. Power ranges here from 115 volts at 16 amps for the CMA GL-X to 208 or 240 volts at 33 to 36 amps for the CMA 181-GW, and the wrong circuit can delay installation by days. Water inlet temperature, pressure, and hardness all matter too.
Some models use a gravity drain and need a floor drain at the right height, while the CMA GL-X with its pumped drain and the Noble HTGW with its built-in drain pump allow more flexible placement, so confirm the drain route with a licensed installer.
Glass care and daily upkeep
Clean glasses start with clean machines. Rinse glasses before loading when they carry lipstick, fruit pulp, or dried drink residue, and do not overload racks, since crowded glasses block spray and leave spots. Use the detergent, rinse aid, and sanitizer the maker lists for the model, at the listed dose.
Empty and clean the drain tray and waste collector, wipe the door seals, and clear the wash and rinse arms of debris. Run the delime cycle when the maker calls for it, and train every bartender on the same loading routine.
FAQ
Bars ask the same questions before buying a glass washer, and the answers depend on volume, space, and local rules rather than on one model. The answers below use the figures from the machines in this roundup, so they can be compared directly with the product sections above.
What is the best glass washer for a small bar
For a small bar, the best fit is usually a compact underbar machine that matches the bar’s power supply and peak hour. The Noble HTGW suits a narrow gap at 18 1/2 inches wide with 22 racks per hour, while the CMA GL-X suits a bar with only 115 volt power and lists 30 racks per hour.
How many glasses can a bar glass washer clean in an hour
Output varies widely across these models. The Noble HTGW lists 792 glasses per hour, the CMA 181-GW lists 600 glasses per hour, the CMA GW-100 lists up to 1,000 glasses per hour, the Jackson Delta 1200 lists 1,200 glasses per hour, and the Jackson Delta 5-E lists 1,440 glasses per hour.
Do bar washers need a booster heater
High temperature models need a booster heater to lift rinse water to the listed final rinse temperature, usually 180 degrees Fahrenheit. The Noble HTGW lists a booster heater with a 1.1 gallon booster tank, and the CMA 181-GW lists a booster heater capable of a 70 degree Fahrenheit rise. Low temperature models use a chemical sanitizer instead.
Can a bar washer handle stemware and tall glasses
Yes, if the interior clearance is taller than the glass. The models here list clearance from 10 5/8 inches for the Noble HTGW to 12 inches for the Jackson Delta 1200, with the CMA 181-GW and CMA GL-X at 11-1/4 inches and the CMA GW-100 at 11-3/4 inches. Measure the tallest glass first, then compare it with the listed clearance.
How much water does a commercial washer use per rack
Water use per rack or per cycle varies from 0.53 gallons per cycle for the Noble HTGW to 1.7 gallons per cycle for the CMA GL-X. The CMA 181-GW lists 0.75 gallons per cycle, the Hobart LXNR-30 lists 0.62 gallons per rack, and the Jackson Delta 5-E lists 1.16 gallons per rack. Rotary models list water use by the minute instead.
Conclusion
Pick the machine that fits the bar’s peak hour, space, and hookups rather than the largest output figure alone. The Noble HTGW suits tight spaces, the CMA GL-X suits 115 volt bars, the CMA 181-GW suits wine service, and the Jackson models suit high volume rooms. Measure first, confirm power and drain, then choose.
Write Your Review
No reviews yet. Be the first to share your experience!