Key takeaways
- Smoke in the air calls for a furnace filter that can catch fine particles. Compare six MERV 13 and carbon options, their sizes, and change schedules. Read on.
Smoke from wildfires, fireplaces, and cooking can hang in indoor air long after the source is gone, and a standard furnace filter often lets the finest particles pass through. The best furnace filters for smoke pair a MERV 13 rating with pleated media, and some add a carbon layer for odor. This guide compares six options.
Quick verdict
If you want the short answer, start with a MERV 13 pleated filter in the size your furnace slot takes, and add a carbon layer when smoke odor is the main complaint. The six filters below cover 1 inch slots, deep media cabinets, and carbon builds for most homes.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Filtrete MPR 1900 Premium Allergen, Bacteria and Virus Air Filter | 1 inch pleated | Standard 1 inch slots | MERV 13, MPR 1900 | Loads fast in heavy smoke |
| Filtrete Healthy Living Elite Allergen Filter, MPR 2200 | 1 inch pleated electrostatic | Higher microparticle capture | MERV 13, MPR 2200 | Single filter per pack |
| Filterbuy 20x25x1 MERV 13 Smoke and Allergy Defense | 1 inch pleated | Common 20x25x1 slots | MERV 13, 16 pleats per foot | Needs a matching slot size |
| Filterbuy 20x20x5 MERV 13 Smoke and Allergy Defense | 5 inch deep media | Honeywell and Lennox cabinets | MERV 13, 11 pleats per foot | Fits deep cabinets only |
| Nordic Pure 20x20x1 MERV 13 Plus Carbon | 1 inch pleated with carbon | Smoke particles plus odor | MERV 13, activated carbon | Shorter change window in smoke |
| Aerostar 14x25x1 MERV 13 Pleated Air Filter | 1 inch pleated | 14x25x1 slots | MERV 13, electrostatic media | Change every 30 to 60 days |
How we selected the best furnace filters for smoke
We compared published specifications and maker descriptions for filters that list smoke among the particles they capture, and we kept only models with a MERV 13 rating or a carbon layer aimed at smoke odor. Each pick below comes from a page we opened and read, and every figure in this guide comes from one of those pages.
Smoke has two parts: fine particles that make up the haze, and gases and odors that make up the smell. A MERV 13 pleated filter is built to catch fine particles, and a carbon layer is built to hold gases and odors. That split shaped the list, and so did slot fit: a filter that does not fit leaves gaps, and air that slips past the edges never passes through the media.
Top picks
The six filters below are grouped by slot type and by how they handle smoke. Read the fit notes with care, because a MERV 13 filter in the wrong size is no help at all, while the right size can catch a large share of the fine particles that pass through it.
Filtrete MPR 1900 Premium Allergen, Bacteria and Virus Air Filter
The Filtrete MPR 1900 pairs a MERV 13 rating with a 1 inch pleated frame, and the maker lists wildfire smoke and PM2.5 among the particles it is designed to capture. It suits homes that want strong fine particle capture without moving to a deep media cabinet.
This filter is for a home with a standard 1 inch slot and a smoke concern that calls for more than a basic pleated filter. The maker lists smoke, tobacco smoke, smog particles, cooking particles, and wildfire smoke and other PM2.5 particles among the things it is designed to capture. Microparticles are described as 0.3 to 1.0 microns in size, and the maker lists a MPR of 1900 with a MERV 13 rating. The maker also states that these filters capture 24 percent more microparticles than MERV 13 requirements call for. Change it at least every 90 days, per the maker, and it is certified asthma and allergy friendly and made for residential use only.
- MERV 13 rating with MPR 1900, in a 1 inch pleated frame
- Maker lists wildfire smoke, PM2.5, tobacco smoke, and smog particles
- Maker states 24 percent more microparticle capture than MERV 13 requirements
- Thin media loads faster than deep media in heavy smoke
- May need earlier changes during long smoke events
Buy it if your furnace takes a 1 inch filter, your system can handle MERV 13, and you want a filter that names wildfire smoke and PM2.5.
Skip it if your furnace already struggles with airflow, if your slot takes a deep media filter, or if you want a carbon layer for smoke odor.
Filtrete Healthy Living Elite Allergen Filter, MPR 2200
The Filtrete MPR 2200 steps up the microparticle rating to 2200 while keeping the same MERV 13 level, and the maker lists smoke, odors, and smog particles among the particles captured. It is the pick for a home that wants the strongest microparticle rating in the Filtrete 1 inch line.
This filter is for a 16x25x1 slot in a home where fine particles are the main worry. The listing gives an actual size of 15.6 x 24.6 x 0.8 inches, a MERV 13 rating, and a MPR rating of 2200. The filter type is listed as electrostatic and pleated. The particles captured are listed as odors, smoke, smog particles, dust mites, virus carriers, mold spores, and pollen. It lasts up to three months, per the maker, and it is sold singly.
- MERV 13 rating with MPR 2200, the higher microparticle rating in this line
- Actual size of 15.6 x 24.6 x 0.8 inches for a 16x25x1 slot
- Maker lists smoke, odors, and smog particles among particles captured
- Sold as a single filter per pack
- Thin media loads faster than deep media in heavy smoke
Buy it if your slot is 16x25x1, you want the highest MPR in the Filtrete 1 inch line, and you will buy more than one box for a full smoke season.
Skip it if you need a multi pack, if your slot is a different size, or if your manual advises against MERV 13 in a 1 inch slot.
Filterbuy 20x25x1 MERV 13 Smoke and Allergy Defense
The Filterbuy 20x25x1 MERV 13 Smoke and Allergy Defense filter is built around the most common furnace slot size in American homes, and its name puts smoke first. It is a direct match for a home that wants MERV 13 capture in a 20x25x1 slot without moving to a deep media cabinet.
This filter is for a home with a 20x25x1 slot and a steady smoke concern, such as a fireplace, a smoker in the home, or a neighborhood that sees wildfire smoke each year. The maker lists MERV 13 synthetic media, comparable with MPR 1900 and FPR 10, and states that it can trap 98 percent of dust particles while guarding the home from bacteria, smoke, smog, lint, pollen, mold, and dander without impacting airflow. The actual size is listed as 19.50 x 24.50 x 0.75 inches, and the construction is described as electrostatically charged with 16 pleats per foot.
The maker states that the media lasts 3 times longer than fiberglass models and advises replacing the filter every 90 days. The pack holds 6 filters. Its main limit is fit: the 20x25x1 size is common, but it is still only one size.
- MERV 13 synthetic media with 16 pleats per foot
- Maker states it can trap 98 percent of dust particles
- Maker lists smoke, smog, bacteria, mold, and dander among what it guards against
- Actual size of 19.50 x 24.50 x 0.75 inches
- Fits a 20x25x1 slot only
- Thin media loads faster than deep media in heavy smoke
Buy it if your slot is 20x25x1, you want a multi pack that covers several changes, and you like a filter that names smoke.
Skip it if your slot is any other size, if your system needs a deep media filter, or if smoke odor is your main complaint.
Filterbuy 20x20x5 MERV 13 Smoke and Allergy Defense
The Filterbuy 20x20x5 MERV 13 Smoke and Allergy Defense filter is the deep media pick in this guide, made for whole house cabinets that take a 5 inch filter. Its depth gives the media far more surface area than a 1 inch filter, which matters when smoke keeps the filter working hard for weeks at a time.
This filter is for a home with a Honeywell or Lennox media cabinet that takes a 20x20x5 filter. The actual size is listed as 19.63 x 19.88 x 4.38 inches, and the maker lists MERV 13 synthetic media comparable with MPR 1900 and FPR 10. The maker states that it can trap 98 percent of dust particles while guarding the home from bacteria, smoke, smog, lint, pollen, mold, and dander without impacting airflow. The media is described as electrostatically charged with 11 pleats per foot, and the maker states that it lasts 3 times longer than fiberglass models.
The maker lists compatibility with Honeywell and Air Demon filter part numbers F25, F35 and F35R, F100 and F150, and F200, and with Lennox models X0585, X8305, and X8308. The maker advises replacing the filter every 90 days. The pack holds 4 filters. Its main limit is that a 5 inch filter only fits a cabinet built for it, so check the cabinet model number against the compatibility list before ordering.
- MERV 13 synthetic media in a 5 inch deep frame
- Maker states it can trap 98 percent of dust particles
- Maker lists smoke, smog, bacteria, mold, and dander among what it guards against
- Listed for Honeywell F25, F35, F100, F150, and F200 cabinets and Lennox X0585, X8305, and X8308
- Fits deep media cabinets only, not 1 inch slots
- Needs a cabinet model check before ordering
Buy it if your home has a Honeywell or Lennox media cabinet that takes a 20x20x5 filter, and you want MERV 13 capture with the longer life deep media allows.
Skip it if your furnace takes a 1 inch filter, if your cabinet model is not on the compatibility list, or if you do not know your cabinet depth.
Nordic Pure MERV 13 Plus Carbon for smoke odor
The Nordic Pure 20x20x1 MERV 13 Plus Carbon filter is the only pick in this guide that pairs a MERV 13 rating with an activated carbon layer, and that pairing is what makes it the pick for smoke odor. The pleated media catches fine particles while the carbon layer holds gases and odors.
This filter is for a home where smoke odor lingers after the haze clears, such as a home near wildfire smoke, a home with a fireplace, or a home where tobacco smoke has left a lasting smell. The listing gives a nominal size of 20x20x1, a performance rating of MERV 13, and a high capacity rating. The media material is listed as electrostatically charged synthetic with activated carbon, and the maker describes an added flat panel infused with activated charcoal. The maker lists the things it filters out as allergens, bacteria, dust mites, dust and lint, mold spores, odors, pet dander, pollen, most smoke, smog particles, and virus carriers.
The actual size is listed as 19-1/2 x 19-1/2 x 3/4 inches, and the initial resistance at 300 fpm is listed as 0.26. The maker states that MERV 13 Plus Carbon air filters are comparable to air filters with the MPR rating of 2200-2400, and the maker describes the media as hypoallergenic, antimicrobial, and electrostatic. The pack holds 6 filters, and the maker recommends changing 1 inch air filters every 30 to 90 days. Its main limit is that the carbon layer has a finite capacity, so the short end of the change window is the realistic one in smoke.
- MERV 13 rating with an activated carbon flat panel
- Maker lists most smoke, odors, and smog particles among what it filters out
- Actual size of 19-1/2 x 19-1/2 x 3/4 inches
- Initial resistance of 0.26 at 300 fpm, per the listing
- Carbon layer loses odor capacity as it loads
- Needs the short end of its change window during smoke events
Buy it if smoke odor is as much of a problem as smoke particles, your slot is 20x20x1, and you will change the filter on the short end of the maker’s window while smoke is present.
Skip it if your slot is a different size, if you only need particle capture, or if you want a filter you can leave in place all season without checking it.
Aerostar 14x25x1 MERV 13 Pleated Air Filter
The Aerostar 14x25x1 MERV 13 Pleated Air Filter covers a less common slot size with the same MERV 13 level as the rest of this guide, and the maker names wildfire smoke among what MERV 13 captures. It is the pick for a home whose slot measures 14x25x1 and whose smoke concern calls for fine particle capture.
This filter is for a home with a 14x25x1 slot and a smoke concern tied to wildfire season, a wood stove, or indoor smoking. The maker states that MERV 13 captures fine particulates including bacteria, smoke from wildfires, and virus-carrying droplets, and the maker describes pleated electrostatic synthetic media. The actual size is listed as 13 1/2 x 24 1/2 x 3/4 inches, and the maker notes that the half inch undersize lets the filter slide into the grille track without wedging. The maker lists comparability as MPR 1500-1900 and FPR 10 for the MERV 13 grade.
The maker states that service life is 60 to 90 days for MERV 8 and 11 in typical residential use, and that MERV 13 wants more frequent changes, closer to every 30 to 60 days, because higher filtration grades reach pressure drop limits faster as they load up. The filters are manufactured by Con-Air Industries at their Orlando, Florida facility. Its main limit is the change window: a MERV 13 filter in a 1 inch frame loads faster than lower grades, and the 30 to 60 day window is not one to stretch during a smoke event.
- MERV 13 rating in a 14x25x1 size
- Maker states MERV 13 captures smoke from wildfires and fine particulates
- Actual size of 13 1/2 x 24 1/2 x 3/4 inches
- Maker advises changing MERV 13 every 30 to 60 days
- Shortest change window of the 1 inch picks in this guide
- Fits a 14x25x1 slot only
Buy it if your slot is 14x25x1, your system can handle MERV 13, and you want a filter whose maker names wildfire smoke in its MERV 13 description.
Skip it if your slot is a different size, if you want a longer change window, or if your manual advises a lower MERV rating for a 1 inch slot.
Buying guide
Buying a furnace filter for smoke is mostly a matter of matching three things: the rating, the size, and the change schedule. Get those three right and the filter can do its job; get any one wrong and even a well made filter will fall short. The notes below walk through each choice in turn.
What MERV rating handles smoke in the best furnace filters for smoke
MERV stands for Minimum Efficiency Reporting Value, and it rates how well a filter catches particles across a range of sizes. A higher number means finer capture, and smoke particles sit at the fine end of that range, which is why every pick in this guide carries a MERV 13 rating.
A MERV 8 filter catches larger dust and lint well, but it is not built for the fine particles that make up smoke haze. Going higher than MERV 13 is rarely an option in a standard furnace slot: true HEPA media is far too dense for most residential systems and would choke airflow. Before you buy, check your furnace manual for a maximum MERV rating, and ask a heating technician if the manual is silent.
Carbon media and smoke odor
Smoke has two parts, and a pleated filter only addresses one of them. Fine particles are caught by the fibers of the media, while gases and odors pass through unless something else holds them. Activated carbon is that something else, and it holds gases and odors as air passes through.
That is why carbon filters are sold for homes where smoke odor lingers after the visible haze is gone. A carbon layer is not a substitute for a high MERV rating, and a high MERV rating is not a substitute for carbon. The Nordic Pure pick in this guide pairs the two, which is the combination to look for when both parts of smoke matter to you. Keep in mind that carbon has a finite capacity, so a carbon filter that stays in place too long will keep catching particles while its odor holding fades.
Matching filter depth to your furnace slot
Furnace filters come in 1 inch, 2 inch, 4 inch, and 5 inch depths, and the depth is set by the slot or cabinet, not by choice. A 1 inch slot takes a 1 inch filter, and a deep media cabinet takes a deep filter, and the two types are not interchangeable.
A filter that is too thick for its slot will not seat, while a filter that is too thin will leave gaps that let unfiltered air slip past. Depth matters for smoke because it sets how much media surface the air passes through. A 5 inch filter has far more pleated surface than a 1 inch filter of the same face size, so it can hold more captured particles before airflow drops. If your home already has a media cabinet, use it.
Measuring your filter slot the right way
Filter sizes are sold by nominal size, and the actual size is smaller. A filter sold as 20x25x1 may measure 19.50 x 24.50 x 0.75 inches, and a filter sold as 14x25x1 may measure 13 1/2 x 24 1/2 x 3/4 inches. That undersize is deliberate, and it lets the filter slide into the slot without wedging.
Do not order by the size printed on the box of your old filter alone; pull the old filter out and measure its length, width, and depth with a tape measure, then compare those numbers with the actual size listed for the new filter. Also note the airflow arrow printed on the frame, which should point toward the furnace blower, not away from it.
How often to change a filter during smoke events
Every maker in this guide gives a change window, and the windows range from 30 days to 90 days depending on the filter and the grade. Those windows assume normal use, and smoke is not normal use. A filter that would last 90 days in a clear season can load up in a few weeks when wildfire smoke hangs over a neighborhood.
The media is catching far more fine particles with every pass, so the practical habit is simple: check the filter by eye once a month in normal use, and once a week while smoke is heavy. Hold it up to a light; if you cannot see light through it, or if the gray coating covers most of the pleats, change it even if the calendar says it has time left. Keep a spare on hand before smoke season starts.
FAQ
The questions below cover the points readers ask most about furnace filters and smoke, from what a filter can and cannot do to how size, rating, and change timing fit together. Each answer draws on the maker descriptions and specifications used for the picks above.
Can a furnace filter remove smoke from a home
A furnace filter can catch the fine particles in smoke as air passes through the system, and a filter with a carbon layer can also hold some of the gases and odors in smoke. That is real help, but it has limits that are worth knowing before you spend on a new filter.
A furnace filter only acts on the air that passes through the furnace, so it does nothing for a room with the vents closed, and it cannot clear smoke that keeps entering through open windows or gaps. Closing windows and running the fan help the filter do more of its job.
Is MERV 13 enough for wildfire smoke
MERV 13 is the rating pointed to for wildfire smoke in a residential furnace, because it is built to catch fine particulates in the size range that makes up smoke haze. The Filtrete MPR 1900 page names wildfire smoke and PM2.5 directly, and the Aerostar page names smoke from wildfires too.
That said, a MERV 13 filter is not a room air cleaner, and it works best when windows stay closed and the filter is changed on time. If smoke is very heavy, a portable air cleaner in the bedroom can add a second layer of filtration.
Do carbon furnace filters help with smoke odor
A carbon furnace filter can help with smoke odor because activated carbon holds gases and odors that plain pleated media lets through. The Nordic Pure pick in this guide uses an activated carbon flat panel for that purpose, and its maker lists odors among the things it filters out.
The help is real but limited: carbon has a finite capacity, and once it is loaded it holds less with each pass. Change a carbon filter on the short end of the maker’s window while smoke is present.
Will a MERV 13 filter slow down my furnace
A MERV 13 filter is denser than a lower rated filter, so it adds more resistance to airflow, and that resistance grows as the media loads up. In a modern system sized for the filter, that added resistance is usually manageable, but in an older system it can strain the blower and cut heating output.
Check your furnace manual for a maximum MERV rating, and if the manual is silent, ask a heating technician before moving up to MERV 13. A deeper filter can ease the strain, because its larger media surface spreads the same capture over more area.
Conclusion
A MERV 13 pleated filter in the right size is the most direct answer to smoke in furnace air, and a carbon layer adds help when odor lingers after the particles are caught. Measure your slot, check that your system can handle MERV 13, and change the filter on schedule during smoke events, and keep a spare on hand for a fast mid season change.
Write Your Review
No reviews yet. Be the first to share your experience!