Updated Nov 17, 2026· 16 min read

Key takeaways

  • Six bulk furnace filters for rental units compared, with MERV 8 and MERV 11 picks in the common 16x25x1 size, plus sizing, change timing and stocking tips.

Rental furnaces need filters that are easy to swap, simple to stock and matched to the slot, and the best furnace filters for landlords balance those needs with steady airflow and a sensible MERV rating. This guide compares six bulk packs in the common 16x25x1 size and explains how to choose, size and schedule them across rental units.

Quick verdict

For most rental units, a MERV 8 pleated filter in a 6-pack is the practical starting point, because it covers ordinary dust and lint, keeps airflow open and gives a landlord several changes from one order. A MERV 11 pack suits units with pets or heavy dust, provided the furnace manual allows that rating.

The Filterbuy 16x25x1 MERV 8 6-pack leads this roundup for landlords who want a widely stocked size with clear maker guidance on change timing and airflow. The AIRx DUST 16x25x1 MERV 8 6-pack is a close match for landlords who want a bulk pack with detailed published specifications. The Filtrete 16x25x1 MERV 11 MPR 1000 4-pack is the pick for a step up in particle capture, while the Simply, Nordic Pure and Aerostar packs cover different combinations of size, MERV rating and pack count.

Product Type Best for Key spec Main limit
Filterbuy 16x25x1 MERV 8 6-pack Pleated, electrostatic General rental use MERV 8, 6 filters Actual size runs under nominal size
AIRx DUST 16x25x1 MERV 8 6-pack Pleated, electrostatic Bulk stocking MERV 8, 6 filters Actual size runs under nominal size
Nordic Pure 16x25x1 MERV 8 6-pack Pleated, electrostatic Simple repeat orders MERV 8, 6 filters Maker does not state actual size on the page opened
Simply 16x25x1 MERV 8 6-pack Pleated, electrostatic Snug fit in loose slots MERV 8, actual size 15.75 x 24.75 x 0.75 inches Thinner media depth than a full 1 inch
Filtrete 16x25x1 MERV 11 MPR 1000 4-pack Pleated, electrostatic Higher particle capture MERV 11, MPR 1000, 4 filters Smaller pack and higher airflow resistance
Aerostar 16x25x1 MERV 11 6-pack Pleated, electrostatic Pets and heavy dust MERV 11, 6 filters Higher rating needs a system check first

How we selected

Selection started from published specifications and product pages from makers and listing pages, with a focus on filters that suit rental work: bulk or multi-pack supply, a common nominal size, a MERV rating that fits ordinary furnaces, and a simple slide-in change.

The list favors the 16x25x1 nominal size because the maker pages describe it as a common furnace slot size, and because a landlord who manages several units often finds the same size repeated across homes built in the same period. Where a maker published an actual size, a change interval, a pleat count or an airflow figure, that figure is used exactly as stated.

Best furnace filters for landlords to stock

The six filters below all come in multi-packs and fit the same nominal 16x25x1 slot, yet they differ in MERV rating, actual size, frame build and pack count. Read each one against the furnaces you manage, then match the rating to the unit and the household.

Filterbuy 16x25x1 MERV 8 Dust Defense 6-pack for landlords

This Filterbuy pack is the most straightforward choice for a landlord who wants one filter to order again and again. It is a pleated MERV 8 filter in a 6-pack, sized for the common 16x25x1 furnace slot, and the maker lists it for furnaces, air conditioners, heat pumps and HVAC systems.

The maker states the actual size as 15.50 x 24.50 x 0.75 inches, against a nominal size of 16 x 25 x 1 inches, and the maker lists the media as MERV 8 synthetic media, comparable with MPR 700 and FPR 5. The maker describes the media as electrostatic and pleated, and the maker lists a capture figure of 90 percent of dust particles, with lint, pollen, mold spores and dander among the particles named on the page.

Change timing is where this pick earns its place for landlords. The maker gives a baseline of every 90 days, with 60 days in a home with pets and 45 days where someone in the home has asthma or allergies.

One limit matters at ordering time. The actual size runs a half inch under nominal in length and width, which the maker says is deliberate so the filter slides in without binding, but a slot that is already loose can let some air pass around the frame.

  • Pros: 6-pack supply, clear 90-day change guidance, low stated pressure drop, made in the USA.
  • Cons: Actual size is smaller than nominal size, MERV 8 captures less fine material than MERV 11.
  • Buy if: You want one repeat order that covers most ordinary rental furnaces.
  • Skip if: A unit needs a higher MERV rating or a filter cut closer to nominal size.

AIRx DUST 16x25x1 MERV 8 pleated air filter 6-pack

The AIRx DUST 16x25x1 MERV 8 6-pack suits landlords who like to see the numbers before they buy in bulk. The listing page lists it as in stock in a 6-pack, with a MERV 8 rating and an entry-level pleated design that the maker describes as an improvement over common fiberglass filters.

The page states the actual size as 15.5 x 24.5 x 0.75 inches and lists the media as electrostatically charged 100 percent synthetic gradient media. The maker lists a change interval of every 90 days under normal use, and the page gives a compatibility guarantee that runs up to a whole year.

Published technical detail is the strongest part of this listing. The page lists an initial resistance of 0.18 inches WC, a rated velocity of 295 FPM, a maximum temperature of 180F in continuous service with a peak of 225F, and a 30 gauge galvanized expanded metal support grid. It also lists particle capture by size band for MERV 8 as 17 percent at 0.3 to 1.0 microns, 50 percent at 1.0 to 3.0 microns and 70 percent at 3.0 to 10 microns.

The limits are the usual ones for a MERV 8 pack. The actual size is smaller than the nominal size, so a loose slot can bypass some air, and the finer material that a MERV 11 filter would hold back passes through this one.

  • Pros: 6-pack supply, detailed published specifications, 90-day change interval, made in the USA.
  • Cons: Actual size is smaller than nominal size, MERV 8 is a basic filtration level.
  • Buy if: You manage several units and want one bulk pack with clear technical detail.
  • Skip if: A unit has heavy pet load or needs finer particle capture.

Nordic Pure 16x25x1 MERV 8 pleated furnace air filters 6-pack

The Nordic Pure 16x25x1 MERV 8 6-pack is a plain repeat-order filter for landlords who want a simple pleated pack without extra features. The listing page lists it as in stock in a 6-pack and gives the size as 16x25x1, with MERV 8 as the rating and a pleated, electrostatic design.

The maker describes the media as MERV rated synthetic poly blend pleated media, comparable with filters rated MPR 600 to 800, and the maker lists dust, mold spores, lint, dust mites and pollen among the particles the filter is described as capturing. The filters are made in the USA, and the 6-pack format gives a landlord a year and a half of changes for one single-return unit at a 90-day interval.

For rental work, the appeal is routine. The same size and the same rating can be ordered for every 16x25x1 slot in a portfolio, and the spare filters stack neatly in a utility closet or a maintenance shelf.

The main limit is information rather than construction. The page opened does not state the actual size, so a landlord cannot confirm the fit from that page alone and should measure the old filter before ordering.

  • Pros: 6-pack supply, made in the USA, simple MERV 8 pleated design, easy repeat ordering.
  • Cons: Actual size not stated on the page opened, change interval not stated on the page opened.
  • Buy if: You want a plain bulk pack for standard 16x25x1 slots across several units.
  • Skip if: You need published actual dimensions before you order.

Simply 16x25x1 air filter MERV 8 6-pack

The Simply 16x25x1 MERV 8 6-pack stands out for landlords with slots that run loose, because its actual size sits closer to nominal than most filters in this roundup. The maker lists the actual size as 15.75 x 24.75 x 0.75 inches, with MPR 600 and FPR 5 as comparable ratings.

The maker describes the media as electrostatic synthetic charged fiber, in a pleated construction with a 24-point beverage board frame and hot-rolled steel wire mesh. The listing gives a particle size range of 3.0 to 10.0 microns, and the maker describes the filter as capturing dust, pet dander, lint and pollen. The pack holds 6 filters, and the listing gives a pack weight of 1.8 pounds.

Change timing is straightforward. The maker describes long-lasting performance for up to 3 months, and the listing says the filter is easy to install or replace by sliding it into the slot and following the airflow arrows. The maker also states that the filters are made in the USA.

The limits are modest. The media depth is 0.75 inches rather than a full 1 inch, so a slot built for a full-depth filter can still leave a small gap, and MERV 8 is a basic rating that holds back less fine material than MERV 11.

  • Pros: 6-pack supply, actual size closer to nominal, steel wire mesh backing, made in the USA.
  • Cons: Media depth is 0.75 inches, MERV 8 is a basic filtration level, no pressure drop figure stated.
  • Buy if: Your slots run loose and you want a filter that seats more snugly.
  • Skip if: A unit needs finer particle capture or a full 1-inch media depth.

Filtrete 16x25x1 MERV 11 MPR 1000 4-pack

The Filtrete 16x25x1 MERV 11 MPR 1000 4-pack is the step-up pick in this roundup, for rental units where a MERV 8 filter is not enough. The listing page lists it as in stock, in a pack of 1 with a pack of 4 option, and gives MERV 11 with MPR 1000 as the ratings. The maker is 3M.

The maker describes the filter with exclusive Filtrete 3-in-1 technology, and the maker lists the design as a 3-month pleated 1-inch electrostatic filter. The maker describes the filter as helping to capture microparticles such as pet dander, smoke and smog, and large particles including lint, pollen and household dust.

For a landlord, the 4-pack format has a clear use. One pack covers a full year of changes for a single unit at a 90-day interval, which makes it easy to leave a dated set with a tenant or in a maintenance cupboard.

The limits deserve attention before ordering. A MERV 11 filter resists airflow more than a MERV 8 filter, so the furnace manual and the age of the system should be checked first, and the 4-pack gives fewer spares than the 6-packs in this roundup.

  • Pros: MERV 11 with MPR 1000, 4-pack covers a year at 90-day changes, 3-month pleated design, in stock.
  • Cons: Higher airflow resistance than MERV 8, smaller pack than the 6-packs, actual size not stated on the page opened.
  • Buy if: One unit needs finer particle capture and the system allows MERV 11.
  • Skip if: The furnace manual calls for MERV 8, or you want a larger bulk pack.

Aerostar 16x25x1 MERV 11 pleated air filter 6-pack

The Aerostar 16x25x1 MERV 11 6-pack pairs a higher MERV rating with a full 6-pack supply, which suits landlords who want finer capture without giving up bulk ordering. The maker page lists MERV 11 as the Pro level for this size, with smoke, pet dander and pollen named in the level description, and the maker lists the filter as pleated.

The maker describes the filter as designed to work with most home and office AC and furnace systems with a compatible intake vent size, and the maker lists the filter as filtering dust, pollen, bacteria and other airborne particles. The maker page states that air filters should be changed about every 90 days, and the maker ships direct from a USA factory warehouse.

For rental work, the MERV 11 rating is the point of this pack. Units with pets or heavy dust load a filter faster, and a higher rating holds back more of the fine material that passes a MERV 8 filter.

The limit is the system check that comes with any higher rating. A MERV 11 filter resists airflow more than a MERV 8 filter, and an older furnace or undersized ductwork can struggle with that extra resistance.

  • Pros: MERV 11 in a 6-pack, pleated design, 90-day change guidance, ships direct from a USA factory warehouse.
  • Cons: Higher airflow resistance than MERV 8, actual size not stated in the page text opened, needs a system check first.
  • Buy if: A unit has pets or heavy dust and the system allows MERV 11.
  • Skip if: The furnace is old or the manual calls for MERV 8 only.

Buying guide

A good filter choice for a rental starts with the furnace, not the catalog. The slot size, the system age, the household and the number of units you manage all shape the right MERV rating, the right pack size and the right change schedule, and getting those basics right matters more than any single brand name.

Match the MERV rating to the unit and the household in the best furnace filters for landlords

MERV, or Minimum Efficiency Reporting Value, is the industry scale for how well a filter captures particles, and a higher number means finer capture with more airflow resistance. For most rental furnaces, MERV 8 is the sensible default, because it covers ordinary dust and lint while keeping airflow open on older systems.

MERV 11 suits units with pets, heavy dust or several occupants, but only when the furnace manual allows it. The Filterbuy maker page gives a useful rule of thumb: systems installed since 2015 can generally run a MERV 13, equipment from 2005 to 2014 suits MERV 11, and equipment from before 2005 should step down to MERV 8. A clogged filter of any rating restricts airflow more than a clean higher-rated filter, so the change schedule matters at least as much as the rating on the frame.

Get the size right before you order a case

The nominal size printed on the box is not the physical size of the filter. Makers in this roundup list actual sizes of 15.50 x 24.50 x 0.75 inches and 15.75 x 24.75 x 0.75 inches for a nominal 16x25x1 filter, and other makers list still different actual sizes.

Measure the slot and the old filter before ordering a case, and read the actual size on the product page rather than the nominal size alone. Note the depth as well as the length and width, because a 1-inch slot cannot take a thicker filter, and a thinner filter can leave a gap. A filter that fits snugly without being bent or crushed is the aim, and the arrow on the frame should point toward the furnace or air handler at every change.

Plan the change schedule and keep spares on site

A filter change is a small job that gets skipped when nobody owns it, so put the schedule in writing. Makers in this roundup give a baseline of every 90 days, with shorter intervals where the page states them, such as 60 days in a home with pets and 45 days where someone has asthma or allergies.

For a landlord, the practical step is to tie the change to a date rather than a feeling. Write the install date on the frame of each new filter, set a calendar reminder for the next change, and leave the next spare in the unit with the date written on it.

Choose packs that fit how many units you manage

Pack size is a stocking decision as much as a buying decision. A 6-pack gives a year and a half of changes for one single-return unit at a 90-day interval, and a 4-pack covers a full year, so order by the number of units you manage and the returns in each one.

Match the pack to the portfolio rather than buying the largest pack by default. A single unit with one return needs fewer spares than a house with two returns, and a unit with a less common size should not be forced onto a bulk size that does not fit. Keep spares dry, flat and out of direct sunlight, and keep different sizes in separate labeled stacks so a hurried change does not put the wrong size in the slot.

Read the frame and media details that affect easy changes

Frame and media details decide whether a change takes a minute or turns into a struggle. Filters in this roundup use pleated electrostatic synthetic media with beverage board frames, and the Simply filter adds a hot-rolled steel wire mesh backing for extra rigidity.

Look for a clear airflow arrow printed on the frame edge, because the arrow is the step most often done wrong. The arrow points toward the furnace or air handler, away from the room, and a backward filter works less well and can let the pleats collapse. Pleat count is worth a glance but not worth chasing on its own: the Filterbuy page lists 14 pleats per foot for its 1-inch filters and notes that depth buys surface area, so a deep pleat matters more than a high count.

FAQ

Landlords ask the same questions about furnace filters again and again, and most of them have short answers once the size, the rating and the schedule are clear. The answers below use the figures published on the maker and listing pages opened for this guide.

What MERV rating works for most rental furnaces?

MERV 8 works for most rental furnaces, because it covers ordinary dust, lint and pollen while keeping airflow open on a wide range of systems, including older ones. The makers in this roundup list MERV 8 as the standard level for residential and commercial use, with MERV 11 as the step up for finer capture.

Choose MERV 11 when a unit has pets, heavy dust or several occupants, and only when the furnace manual allows that rating. A higher rating resists airflow more, so an old furnace or undersized ductwork can struggle with it, and the benefit of finer capture is lost if the filter is left in place long past its change date.

How often should landlords change furnace filters in rentals?

The baseline given by the makers in this roundup is every 90 days, which means four filters a year for a single-return unit. That interval shortens with pets, heavy dust, renovation work or smoke in the air, and the Filterbuy maker page gives 60 days for a home with pets and 45 days where someone in the home has asthma or allergies.

A landlord should own the schedule rather than leaving it to memory. Write the install date on each filter frame, set a reminder for the next change, and leave the next spare in the unit.

Can one filter size cover every unit in a portfolio?

One size can cover every unit only when every unit has the same slot size, which is common in homes built at the same time by the same builder and far from certain across a mixed portfolio. The 16x25x1 size in this roundup is described by makers as a common furnace slot size, yet many homes use 20x20x1, 20x25x1, 16x20x1 or another size entirely.

Keep a written list of the filter size and MERV rating for each address, taken from the old filter or a tape measure on the slot, and order from that list. Measure before ordering a case, and keep different sizes in separate labeled stacks.

Should tenants change the filter or should the landlord?

Either arrangement can work, but the one that works is the one written down. A lease or a written move-in sheet should state who changes the filter, how often, and where the spare is kept, because a change is easy to skip when nobody is sure it is theirs.

Many landlords keep the job themselves or with a handyman on a quarterly visit, which keeps the rating consistent and the schedule on track. A quick check at each inspection visit catches a missed change before the filter loads up.

Are higher MERV filters always better for rentals?

Higher MERV filters are not always better for rentals, because every step up in rating captures more and resists airflow more. A MERV 11 or MERV 13 filter in a system built for MERV 8 can slow airflow, make the system run longer to reach temperature, and wear parts faster, which costs more than the finer capture saves.

The right rating is the highest one the furnace manual and the ductwork allow, changed on schedule. Match the rating to the system, keep the schedule, and spend the effort on timely changes rather than on the highest number on the box.

Conclusion

For most rental units, a MERV 8 pleated filter in a 6-pack, changed every 90 days and matched to the slot, is the sound choice. Step up to MERV 11 only where the system allows it, keep dated spares on site, measure every slot before ordering, and let a written schedule do the work across the portfolio.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.