Key takeaways
- We compared pleated MERV 12 and MERV 13 furnace filters that capture dust, pollen, mold spores and pet dander. Read the six picks, key specs and limits first.
A furnace filter cannot change the air in a home on its own, yet the right pleated filter can trap far more dust, pollen, mold spores and pet dander than a thin fiberglass panel. This guide compares six best furnace filters for asthma households, all rated MERV 12 or MERV 13, with the specs and limits that matter before you buy.
Quick verdict
If you want one short answer, start with a pleated MERV 13 filter in the exact size your system takes, and change it on schedule. The Filtrete MPR 1900 leads this list for homes that want a certified asthma and allergy friendly 1-inch filter, while the Aprilaire 213 suits matching Aprilaire cabinets.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Filtrete High Performance 16 x 20 x 1 MERV 13 MPR 1900 | 1-inch pleated | Certified asthma and allergy friendly 1-inch pick | MERV 13, MPR 1900, 24 percent small particle capture rate | Needs a change about every 90 days |
| Filtrete 16 x 24 x 1 MPR 1500 MERV 12 | 1-inch pleated | Higher small particle capture rate at MERV 12 | MERV 12, MPR 1500, up to 54 percent of virus airborne particles | Lower MERV rating than the MPR 1900 model |
| Filterbuy 14 x 24 x 1 MERV 13 Smoke and Allergy Defense | 1-inch pleated | High pleat density in a common 1-inch size | MERV 13, 16 pleats per foot, captures 98 percent of dust particles | 1-inch depth loads faster than a deep pleated filter |
| Nordic Pure 20 x 25 x 4 MERV 13 pleated furnace filter | 4-inch pleated | Longer service life in a deep filter slot | MERV 13, actual size 19.5 x 24.5 x 3.63 inches | Fits only systems that take a 4-inch deep filter |
| Aprilaire 213 MERV 13 media filter | 4-inch accordion media | Aprilaire whole-house air purifier cabinets | MERV 13, nominal size 20 x 25 x 4 inches, captures 93 percent of airborne viruses | Fits only listed Aprilaire models |
| Nordic Pure 20 x 20 x 1 Plus Carbon MERV 13 | 1-inch pleated with carbon | Particle capture plus odor control | MERV 13, activated carbon panel, initial resistance 0.26 at 300 fpm | Carbon panel adds odor control, not dust capacity |
The table shows the main trade-off here. A 1-inch pleated filter fits the most homes, but it holds less dust before airflow starts to fall. A 4-inch deep pleated filter holds far more dust, yet it only works in a cabinet built for that depth.
How we selected
We selected these six filters from published maker and listing specifications, looking for pleated filters rated MERV 12 or MERV 13 that are currently sold. Each product below carries a rating, a size and maker claims drawn from a page we opened and read.
We gave weight to filters with a clear MERV rating, a stated size and a stated change interval, because those three facts decide whether a filter fits, how much it can capture and how often it needs attention. We also favored filters whose makers describe the particles they capture in plain terms.
Six furnace filters for asthma
These six filters cover the main shapes of this market: two 1-inch Filtrete models, a dense pleated Filterbuy, two deep pleated filters for larger cabinets, and a carbon model for odor control. All six are pleated, rated MERV 12 or MERV 13, and currently sold.
Filtrete High Performance 16 x 20 x 1 MERV 13 MPR 1900
This 1-inch Filtrete filter is the most direct match for the keyword in this guide. The maker lists it as a 3-month pleated filter with a MERV 13 rating and a 1900 MPR rating, and the maker describes it as certified asthma and allergy friendly. It is built for residential heating and cooling systems.
The maker describes Filtrete 3-in-1 technology as a design that pulls in and traps unwanted particles while letting cleaner air flow through. The listed particles include pet dander, smoke, bacteria, lint, pollen and dust. The maker lists a 24 percent small particle capture rate, and the maker also lists this filter as having the highest airflow among MERV 13 filters, based on California Energy Commission claimed data as of January 29, 2025.
The 16 x 20 x 1 inch size is one of the most common furnace filter sizes in American homes. The maker states that the filter should be changed at least once every 90 days, and the maker offers a smart phone app with change reminders.
Pros
- MERV 13 rating with a 1900 MPR rating
- Maker describes it as certified asthma and allergy friendly
- Maker lists a 24 percent small particle capture rate
- Common 16 x 20 x 1 inch size fits many standard slots
- Maker lists a 90 day change interval
Cons
- 1-inch depth holds less dust than a deep pleated filter
- Needs a change about every 90 days, which some homes may forget
- Only one size is covered by this listing, so measure before ordering
Buy if you want a certified asthma and allergy friendly 1-inch filter with a MERV 13 rating. Skip if your system takes a 4-inch deep filter.
Filtrete 16 x 24 x 1 MPR 1500 MERV 12
This Filtrete model sits one step below the MPR 1900 in rating, yet it carries a higher small particle capture figure on its own listing. The maker lists it as a 16 x 24 x 1 inch pleated filter with a MERV 12 rating and a 1500 MPR rating, and the maker describes it as certified asthma and allergy friendly.
The maker lists a 54 percent small particle capture rate for this filter, and the maker describes the filter as able to capture up to 54 percent of virus airborne particles, based on airborne MS2 virus testing at initial efficiency. The maker also lists pet dander, smoke, bacteria, lint, pollen and household dust. It uses the same Filtrete 3-in-1 technology as the MPR 1900 model.
The 16 x 24 x 1 inch size suits larger return slots than the 16 x 20 inch model. The MERV 12 rating is lower than MERV 13, so homes that want the highest capture rating should look at the MPR 1900 model or one of the MERV 13 options below.
Pros
- MERV 12 rating with a 1500 MPR rating
- Maker describes it as certified asthma and allergy friendly
- Maker lists up to 54 percent of virus airborne particles captured
- Larger 16 x 24 inch face suits bigger return slots
- Filtrete 3-in-1 technology as listed by the maker
Cons
- MERV 12 rating is lower than the MERV 13 models in this guide
- 1-inch depth holds less dust than a deep pleated filter
- Change interval is not spelled out as plainly as on the MPR 1900 listing
Buy if you want a certified asthma and allergy friendly filter with a strong small particle capture figure at MERV 12. Skip if you want the highest MERV rating in this guide.
Filterbuy 14 x 24 x 1 MERV 13 Smoke and Allergy Defense
This Filterbuy model is a 1-inch pleated filter built around dense media. The maker lists it as a 14 x 24 x 1 inch filter with an actual size of 13.38 x 23.38 x 0.75 inches, a MERV 13 rating, and 16 pleats per foot of electrostatically charged media. The maker states that it captures 98 percent of dust particles.
The maker lists this filter as recommended for a home where someone has a respiratory illness such as asthma, because of its ability to trap dust particles while guarding the home from bacteria, smoke, smog, lint, pollen, mold and dander without harming airflow.
The frame is an industrial grade beverage board frame paired with dual wire backing, and the maker states that the frame can endure temperatures up to 200 degrees Fahrenheit. Airflow arrows printed on the frame show the direction of airflow. The filter is sold as a 4-pack.
Pros
- MERV 13 rating with 16 pleats per foot
- Maker lists 98 percent of dust particles captured
- Maker describes it as recommended for homes where someone has a respiratory illness such as asthma
- Beverage board frame with dual wire backing, rated by the maker to 200 degrees Fahrenheit
- Sold as a 4-pack for scheduled changes
Cons
- 1-inch depth loads faster than a deep pleated filter
- Needs a change every 90 days for the best results
- Actual size is smaller than the nominal size, so measure the old filter first
Buy if you want a dense pleated MERV 13 filter in a common 1-inch size with spares on hand. Skip if your system takes a deep pleated filter.
Nordic Pure 20 x 25 x 4 MERV 13 pleated furnace filter
This Nordic Pure model is the deep pleated option for homes with a 4-inch filter slot. The listing gives a nominal size of 20 x 25 x 4 inches and an actual size of 19.5 x 24.5 x 3.63 inches, with a MERV 13 rating and a synthetic poly blend pleated media. The maker describes it as recommended for allergy and asthma sufferers.
The maker describes the filtration as able to capture fine particles, including coughs and sneezes, smog and smoke particles. A 4-inch deep filter has far more media area than a 1-inch filter of the same face size, so it can hold more dust before airflow starts to fall. The maker recommends changing 4-inch air filters every 3 to 6 months, with a maximum filter life of 6 months.
The filter is sold as a 6-pack, which covers a full year or more of changes at the maker recommended interval. The media is listed as polypropylene, and the filter type is listed as electrostatic. The main limit is fit: a 4-inch deep filter only works in a slot built for that depth, so measure the old filter first.
Pros
- MERV 13 rating in a deep pleated 4-inch size
- Maker describes it as recommended for allergy and asthma sufferers
- Maker recommends a change every 3 to 6 months
- Sold as a 6-pack for a full year or more of changes
- Electrostatic polypropylene media
Cons
- Fits only systems built for a 4-inch deep filter
- Maker does not state a small particle capture rate for this model
- Actual size differs from the nominal size, so measure first
Buy if your system takes a 4-inch deep filter and you want a MERV 13 rating with a longer change interval. Skip if your slot is 1 inch deep.
Aprilaire 213 MERV 13 media filter
The Aprilaire 213 is a factory original media filter for Aprilaire whole-house air purifier cabinets. The listing gives a MERV 13 rating and a nominal size of 20 x 25 x 4 inches. The maker describes it as an accordion style filter that ships flat and slides into place on the Aprilaire interlock rail system.
The maker lists MERV 13 filtration that traps common airborne allergens as they pass through the filter, including dust, pollen, mold spores, bacteria, pet dander and dust mites. The maker also lists a capture figure of 93 percent of airborne viruses that pass through the filtering system. The deep pleat design is listed as creating minimal airflow resistance.
Fit is narrow by design. The listing states that the filter fits Aprilaire whole-house air purifier models 1210, 1620, 2210, 2216, 3210 and 4200, and that it can fit the model 2200 air purifier after an upgrade with the 1213 rail kit. If your home does not have one of those cabinets, this filter will not fit.
Pros
- MERV 13 rating in a factory original filter
- Maker lists 93 percent of airborne viruses captured
- Accordion style ships flat and slides into the interlock rail system
- Deep pleat design listed as creating minimal airflow resistance
- Clear list of fitting Aprilaire models
Cons
- Fits only listed Aprilaire models, so most homes cannot use it
- Needs the 1213 rail kit for the model 2200 cabinet
- Maker does not state a change interval on the listing we opened
Buy if your home has a matching Aprilaire cabinet and you want the factory original MERV 13 media filter. Skip if your system is not an Aprilaire cabinet.
Nordic Pure 20 x 20 x 1 Plus Carbon MERV 13
This Nordic Pure model pairs MERV 13 pleated media with an activated carbon panel, which makes it the odor control pick in this guide. The listing gives a nominal size of 20 x 20 x 1 inches and an actual size of 19.5 x 19.5 x 0.75 inches, with a MERV 13 rating.
The maker lists the particles this filter is built to capture as allergens, bacteria, dust mites, dust and lint, mold spores, odors, pet dander, pollen, most smoke, smog particles and virus carriers. The maker describes the activated carbon material as attracting and holding odorous gases and vapors, including volatile organic compounds. The maker also describes the media as hypoallergenic and antimicrobial.
The listing gives an initial resistance of 0.26 at 300 fpm. The frame is a heavy duty, moisture resistant beverage board frame with a metal mesh support grid bonded to the pleats. The maker states that MERV 13 is equivalent to MPR 2200 to 2400.
Pros
- MERV 13 rating with an activated carbon panel for odor control
- Maker lists a wide set of captured particles, including odors and most smoke
- Maker lists an initial resistance of 0.26 at 300 fpm
- Maker describes the media as hypoallergenic and antimicrobial
- Sold as a 6-pack for scheduled changes
Cons
- 1-inch depth needs a change every 30 to 90 days
- Carbon panel adds odor control, not extra dust holding capacity
- Actual size is smaller than the nominal size, so measure first
Buy if you want MERV 13 capture plus odor control in a 1-inch filter. Skip if you want the longest interval between changes.
Buying guide
A furnace filter is a simple part, yet the wrong size or the wrong rating can waste money and strain a furnace. The five points below cover the choices that matter most for a home where airborne particles are a concern, and each one is worth a few minutes before you order.
Match the MERV rating to your furnace in the best furnace filters for asthma
MERV stands for Minimum Efficiency Reporting Value, and it is the rating scale that describes how well a filter captures particles of a given size. A higher MERV rating captures smaller particles, and MERV 13 is near the top of the range used in most homes. Every filter in this guide is rated MERV 12 or MERV 13.
A higher rating is not always better. A MERV 13 filter pushes back harder on airflow than a MERV 8 filter, and an older furnace may lose airflow with a dense filter. Read the furnace manual for the highest rating the maker allows, and ask a heating technician if the manual is silent on the point.
Measure the slot before you order
Almost every furnace filter has an actual size that is smaller than the nominal size printed on the frame. A filter sold as 14 x 24 x 1 inches may measure 13.38 x 23.38 x 0.75 inches. That gap is normal, and it is the reason a tape measure check of the old filter beats a guess from the label.
Take the old filter out, measure its length, width and depth, and write the numbers down before you order. Check the airflow arrow on the old filter frame, because the new filter must go in with its arrow pointing toward the blower. A filter that is too small leaves a gap where unfiltered air can pass around the frame.
How often should you change a furnace filter for asthma
The change interval is set by the maker of each filter, and it varies with depth, dust load and season. The 1-inch filters in this guide carry intervals of 30 to 90 days, and the makers state 90 days for the Filtrete and Filterbuy models. The deep pleated 4-inch filter carries an interval of 3 to 6 months.
Homes with pets, heavy dust, construction nearby, or a long heating season will load a filter faster than a home with none of those factors. Check the filter face once a month during the heating season, and change it early if the media looks gray or clogged.
Airflow matters as much as capture
Capture and airflow pull in opposite directions, and a good filter balances the two. Dense pleats capture more particles, yet they also push back harder on the air moving through them. Filtrete lists its MPR 1900 model as having the highest airflow among MERV 13 filters.
Those figures are maker claims from published listings, and they are not directly comparable across brands because each maker tests and reports in its own way. The practical test is in your own home: after installing a new filter, check that air still flows strongly from the vents.
Read certifications and maker claims with care
Two Filtrete models in this guide carry a certification that the maker describes as certified asthma and allergy friendly, and that certification is the clearest third party mark in this group. A certification means the product passed a set of tests set by the certifying body.
Filterbuy describes its MERV 13 media as recommended for homes where someone has a respiratory illness such as asthma. Nordic Pure describes its MERV 13 filters as recommended for allergy and asthma sufferers. Compare the rating, the size and the change interval first.
FAQ
These questions come up often when a home moves from a basic fiberglass filter to a pleated MERV 12 or MERV 13 filter. The answers stay close to the maker listings in this guide and to general furnace care, and they point back to your furnace manual.
Is a MERV 13 furnace filter right for asthma
A MERV 13 pleated filter is the rating most often suggested for homes where airborne particles are a concern, because it captures smaller particles than a MERV 8 or MERV 11 filter. Four of the six filters in this guide carry a MERV 13 rating, and two carry a certified asthma and allergy friendly mark.
The rating alone does not settle the question. Your furnace must be able to move air through a MERV 13 filter without strain, and the filter must fit the slot in your system. Read the furnace manual for the highest rating the maker allows, and ask a heating technician if you are unsure.
What size furnace filter do I need
You need the size that matches the slot in your furnace or return grille, and the only sure way to find it is to measure the old filter. Read the nominal size printed on the old filter frame, then measure the actual length, width and depth with a tape measure.
Common sizes in this guide include 16 x 20 x 1 inches, 16 x 24 x 1 inches, 14 x 24 x 1 inches, 20 x 20 x 1 inches and 20 x 25 x 4 inches, yet your home may take a different size. Do not order by the size of the slot opening alone.
Can a furnace filter replace a room air cleaner
A furnace filter and a room air cleaner do different jobs, and one does not replace the other. A furnace filter cleans the air that passes through the heating and cooling system, which means it only works when the blower runs. A room air cleaner runs on its own in one room and keeps working even when the furnace is off.
A pleated MERV 13 furnace filter can trap dust, pollen, mold spores and pet dander from the air that passes through it, and that is a real gain for a whole home. A room air cleaner can add capture in a bedroom or living room, and it can run at night when the furnace is idle.
How do I know when to change the filter
Start with the maker interval: about every 90 days for the 1-inch filters in this guide, every 30 to 90 days for the Nordic Pure Plus Carbon model, and every 3 to 6 months for the 4-inch deep pleated filter. Then check the filter face once a month during the heating season.
Other signs include weak airflow from vents, a furnace that runs longer than normal, or more dust settling on surfaces. Homes with pets or construction nearby will reach those signs sooner. Write the install date on the new filter frame, and keep a spare on hand.
Do thicker filters last longer than 1-inch filters
Yes, in general a thicker filter lasts longer than a 1-inch filter of the same face size, because it has more media area to hold dust. The makers in this guide reflect that: the 1-inch filters carry intervals of 30 to 90 days, while the 4-inch Nordic Pure filter carries an interval of 3 to 6 months.
Thicker is only better when the system was built for it. A 4-inch filter will not fit a 1-inch slot. If your system takes a 4-inch filter, use the depth and enjoy the longer interval. If it takes only a 1-inch filter, accept the shorter interval and change on time.
Conclusion
Start with the size your system takes, choose a pleated MERV 13 filter when your furnace allows it, and change it on the maker schedule. The Filtrete MPR 1900 is the clearest 1-inch pick here, the Aprilaire 213 suits matching cabinets, and the deep Nordic Pure models reward homes with 4-inch slots today.
Write Your Review
No reviews yet. Be the first to share your experience!