Updated Nov 17, 2026· 16 min read

Key takeaways

  • Compare six furnace filters, from MERV 11 to MERV 16, for homes with allergies and asthma. Actual sizes, ratings, and maker specs to help pick the right fit.

A furnace filter sits in the return air path and catches dust, pollen, pet dander, and airborne particles while the fan runs. The right best furnace filters for allergies and asthma balance a high MERV rating with correct fit and steady airflow, so this guide compares six listed filters by size, rating, and maker specs.

Quick verdict

For most homes with a standard 1 inch slot, the MERV 13 picks in this guide give the strongest mix of fine particle capture and broad size choice. Homes with a deep media cabinet can look at the MERV 16 Lennox box filter instead. The table below lines up all six picks at a glance.

Product Type Best for Key spec Main limit
BNX TruFilter 16x25x1 MERV 13 Pleated electrostatic, 1 inch Smaller slots that need MERV 13 Actual 15 11/16 x 24 11/16 x 3/4 inches No change interval stated
Simply Filters 20x25x1 MERV 13 Pleated, 1 inch Large slots, six pack supply Actual 19.75 x 24.75 x 0.75 inches; up to 3 months Confirm current availability
Lennox Healthy Climate X6675 MERV 16 Pleated box filter, 5 inch Deep media cabinets MERV 16; 24.8 x 19.8 x 4.3 inches Fits media cabinets only, not 1 inch slots
Filterbuy 20x25x1 MERV 13 Health Defense Pleated electrostatic, 1 inch Large slots, MERV 13 Actual 19.50 x 24.50 x 0.75 inches; traps 98% of dust particles No change interval stated
Amazon Basics 16x25x1 MERV 11 Pleated electrostatic, 1 inch Lighter filtration, six pack supply Actual 15.75 x 24.75 x 0.75 inches; 3 microns Lowest MERV rating in this roundup
Aerostar 20x25x1 MERV 13 Pleated, 1 inch Large slots, MERV 13 Actual 19.75 x 24.75 x 0.75 inches; MPR 1500 No capture figure stated for this size

How we selected

Each filter in this guide comes from a product or review page that was opened and read, and every rating, size, and capture figure below is copied from those pages. Products that could not be opened were left out, and no spec came from memory. That rule kept the list short and honest.

The shortlist favors filters with a MERV 11 rating or higher, the usual starting point for stronger capture of pollen, mold spores, pet dander, and smoke. The guide covers the two most common 1 inch nominal sizes, 16x25x1 and 20x25x1, and one deep box filter for homes with a media cabinet. Where a maker lists a capture figure, a comparable rating, a frame detail, or a change interval, that detail is quoted as the maker lists it.

Furnace filters for allergies and asthma: the six picks

The six filters below span MERV 11, MERV 13, and MERV 16, in 1 inch panels and one 5 inch box. Read the size and the actual dimensions first, then weigh the rating, the pack count, and the frame build for your own system. Each entry gives the stated specs and limits.

BNX TruFilter 16x25x1 MERV 13

The BNX TruFilter suits a 16x25x1 slot that needs MERV 13 filtration in a 1 inch panel. Its actual size is 15 11/16 x 24 11/16 x 3/4 inches, so it runs a little smaller than the nominal size on each side, which is the normal pattern for pleated panels.

The maker lists this filter as MERV 13, comparable with MPR 1500-1900 and FPR 10, with electrostatically charged media and low airflow resistance based on ASHRAE Standard 52.2-2017. The maker also lists a capture figure of 98% of airborne particles, naming virus carriers, bacteria, smoke, pollen, pet dander, dust, and mold. The model number is BN-M13S-16x25x1-4PP, the pack holds 4 filters, and the listed item weight is 1.71 pounds.

The maker lists production by BNX Converting, LLC in Houston, TX, with a single sided one piece frame made from recycled cardboard and classification under UL 900.

No change interval was stated for this filter, so the article gives none. A 1 inch MERV 13 panel also loads faster than a deep media filter in a dusty home, so look at the panel often in the first months.

  • Pros: MERV 13 rating, MPR 1500-1900 and FPR 10 comparisons
  • Pros: Actual size stated to the sixteenth inch
  • Pros: Single piece recycled cardboard frame
  • Cons: No change interval stated
  • Cons: 1 inch depth loads faster than deep media

Buy if your slot measures 16x25x1 and you want MERV 13 filtration with a stated actual size. Skip if you need a deep media filter or a maker stated change interval.

Simply Filters 20x25x1 MERV 13

The Simply Filters 20x25x1 MERV 13 suits a large 1 inch slot and comes as a 6 pack. Its actual size is 19.75 x 24.75 x 0.75 inches, a quarter inch short of nominal on the long sides and on depth. The six pack format keeps spares on hand for the next change.

The maker lists a MERV 13 rating, comparable with MPR 1500-1900 and FPR 10, and describes the media as pleated with a higher pleat count than most retail filters. The maker lists dust, pet dander, pollen, smoke, bacteria, and allergens among the particles the filter captures, and states that the filter lasts for up to 3 months. The part number is SF20x25x1-6pkM13, the listed item weight is 3 pounds, and the pack holds 6 filters with an installation guide.

The maker states that the filters are made in the USA from American components, and the listing carries OEKO-TEX Standard 100 certification, number 23.HUS.17250.

The main limit is availability: the copy read showed no featured offers available, so confirm current availability before you settle on this pack. The maker also states no frame temperature limit or pleat count number, so those details are not listed here.

  • Pros: MERV 13 rating, MPR 1500-1900 and FPR 10 comparisons
  • Pros: 6 pack, service life up to 3 months per filter
  • Pros: OEKO-TEX Standard 100 certification stated
  • Cons: Availability not shown on the copy read
  • Cons: No frame temperature limit stated

Buy if your slot measures 20x25x1 and you want a MERV 13 six pack with a stated 3 month service life. Skip if you need a firm availability signal or a stated frame temperature limit.

Lennox Healthy Climate X6675 MERV 16

The Lennox Healthy Climate X6675 is the deep filter in this roundup, a 20x25x5 box filter with a MERV 16 rating for homes that already have a media cabinet. Its listed dimensions are 24.8 x 19.8 x 4.3 inches, and it comes as a 2 pack. The 2 pack keeps a spare on hand for the next change.

The maker lists carbon fiber as the material and pleated as the construction, with a listed weight of 5 pounds. The listing names compatible equipment including Lennox HCC20-28, Honeywell F25A1068 and F200E1038, Carrier EZXCAB020, and Trion Air Bear 453000-001, among others. Match the cabinet first and treat the list as a second check.

MERV 16 is the highest rating in this guide, and the 5 inch depth is what makes that rating practical in a home system. A deep pleated box holds far more media than a 1 inch panel. The listing read showed the product sold by a third party seller, so confirm the seller and the model number, X6675, before you settle on it.

This filter fits a media cabinet that takes a 20x25x5 box filter, and it does not fit a 1 inch slot. No change interval was stated, and the 5 pound listed weight means the pack is heavier to store and handle than thin panels.

  • Pros: MERV 16 rating, the highest in this roundup
  • Pros: Deep 5 inch box, far more media than a 1 inch panel
  • Pros: Wide compatibility list across Lennox, Honeywell, Carrier, and Trion
  • Cons: Media cabinets only, not 1 inch slots
  • Cons: No change interval stated

Buy if you have a media cabinet that takes a 20x25x5 box filter and you want the highest MERV rating in this guide. Skip if your system has only a 1 inch slot.

Filterbuy 20x25x1 MERV 13 Health Defense

The Filterbuy 20x25x1 MERV 13 Health Defense suits a large 1 inch slot and is the second MERV 13 pick at this size. Its actual size is 19.50 x 24.50 x 0.75 inches, a half inch short of nominal on the long sides and a quarter inch short on depth. A spare filter on the shelf makes the next change easy.

The maker lists MERV 13 synthetic media, comparable with MPR 1900 and FPR 10, able to trap 98% of dust particles. The maker describes the filter as a fit for a furnace, air conditioner, heat pump, or HVAC system, and the listing read showed InStock availability for the 2 pack. That mix of a stated capture figure, a stated actual size, and a live listing makes this pick easy to size with confidence.

The Health Defense line is aimed at homes that want strong fine particle capture in a thin panel. The 2 pack is a middle ground: enough for a spare on the shelf without the storage needs of a six pack.

No change interval was stated on the part of the page read, so the article gives none for this filter. The description on the page was also cut short in the copy read, so frame and pleat details beyond the MERV 13 media are not listed here. Watch the first filter for loading and set a change routine that matches your home.

  • Pros: MERV 13 rating, MPR 1900 and FPR 10 comparisons
  • Pros: Stated 98% dust particle capture figure
  • Pros: Availability shown as InStock
  • Cons: No change interval stated
  • Cons: Frame and pleat details not stated

Buy if your slot measures 20x25x1 and you want a MERV 13 panel with a stated dust capture figure. Skip if you want a maker stated change interval or frame detail.

Amazon Basics 16x25x1 MERV 11

The Amazon Basics 16x25x1 MERV 11 is the light filtration pick in this guide, for a 16x25x1 slot where MERV 11 is enough. Its actual size is 15.75 x 24.75 x 0.75 inches, a quarter inch short of nominal on each side and on depth. The 6 pack covers several changes.

The maker lists a MERV 11 rating, electrostatically charged synthetic material, and capture of allergens as small as 3 microns. The frame is beverage board with wire mesh support, and the 6 pack provides replacements for up to 12 months with changes every 60 to 90 days. Six filters, changed every 60 to 90 days, cover about a year of use.

MERV 11 is a sensible middle step for a home that wants better capture than a basic fiberglass panel without the airflow demand of a MERV 13 panel. The electrostatic charge helps the media attract and hold fine particles, and the wire mesh backing keeps the pleats in shape as the panel loads.

MERV 11 is the lowest rating in this roundup, so it captures less of the finest particles than the MERV 13 and MERV 16 picks. The maker states no dust capture percentage, so no such figure is listed here.

  • Pros: MERV 11 rating, lighter airflow demand than MERV 13
  • Pros: Stated 60 to 90 day change span and up to 12 months per 6 pack
  • Pros: Beverage board frame with wire mesh support
  • Cons: Lowest MERV rating in this roundup
  • Cons: No dust capture percentage stated

Buy if your slot measures 16x25x1 and you want MERV 11 filtration with a stated change span. Skip if you want the strongest fine particle capture in this guide.

Aerostar 20x25x1 MERV 13

The Aerostar 20x25x1 MERV 13 rounds out the guide as a second large size MERV 13 pick in a 6 pack. Its actual size is 19.75 x 24.75 x 0.75 inches, a quarter inch short of nominal on the long sides and on depth. The 6 pack covers several changes. The 6 pack covers several changes.

The listing names this filter as MERV 13, with MPR 1500 in the title, and lists the pack as 6 filters for air conditioner, furnace, and HVAC. That is the full set of size specific facts stated for the 20x25x1 size on the page read. The same line is listed in other sizes with electrostatic pleated media, a beverage board frame, and a 3 month service life, but those details were stated for the 16x25x1 size.

Even with a short spec list, the size and rating make this pick easy to place. A 20x25x1 MERV 13 panel fits the largest common 1 inch slot, and the 6 pack covers several changes.

No capture percentage, change interval, or frame detail was stated for the 20x25x1 size, so none is listed here. If those details matter, the Filterbuy 20x25x1 MERV 13 states a 98% dust capture figure, and the Simply 20x25x1 MERV 13 states a service life of up to 3 months.

  • Pros: MERV 13 rating in the largest common 1 inch size
  • Pros: 6 pack covers several changes
  • Pros: Actual size stated to the quarter inch
  • Cons: No capture figure stated for this size
  • Cons: No change interval or frame detail stated for this size

Buy if your slot measures 20x25x1 and you want a MERV 13 six pack. Skip if you want a stated capture figure or change interval for the exact size.

Buying guide

Choose a furnace filter by size first, rating second, and change routine third. A filter that does not fit lets air pass around the frame, and a rating that the fan cannot support adds strain. The five points below walk through rating, size, airflow, change routine, and frame build.

Match the MERV rating to a home with allergies and asthma in the best furnace filters for allergies and asthma

The MERV scale runs from 1 to 16 for residential filters, and higher numbers capture smaller particles. EPA guidance recommends MERV 13, or the highest rating the system fan and filter slot can handle, for fine particles, smoke, bacteria, and airborne virus carriers.

MERV 13 filters must show at least 50% removal efficiency for the smallest particles tested. That is a test floor, not a promise about every particle in a house. MERV 11 is a lighter step that still captures pollen, dust mite debris, mold spores, and pet dander, while MERV 16 belongs in a deep media cabinet where the extra media keeps resistance in check. Pick the highest rating your slot depth and fan can support.

Measure the slot and read the actual size

Nominal size is a label, not a measurement. Every filter in this guide measures smaller than its nominal size: the 16x25x1 panels run 15.75 or 15 11/16 inches on the short side, and the 20x25x1 panels run 19.50 or 19.75 inches on the short side. A tape measure is all you need.

Measure the slot with a tape, then compare the listed actual size, not the nominal size, against that measurement. A panel that is a quarter inch short on each side still seats well in most slots, but a panel that leaves a visible gap lets unfiltered air pass around the frame. Write down the nominal size, actual size, and depth, and keep that note near the furnace.

Mind airflow and the furnace manual

A higher MERV rating adds resistance, and a 1 inch panel has less media to spread that resistance across than a deep box filter. In a 1 inch slot, MERV 13 is the usual ceiling, and some older furnaces cope better with MERV 11. The manual is the first place to look for a stated limit.

Read the furnace manual for a stated MERV limit or filter size range before you move up a rating. If the manual states nothing, ask a heating technician to look at the blower and the duct layout. A filter that chokes airflow can raise strain on the blower and cut the air reaching the rooms. The deep Lennox box filter shows the other side of the rule: depth buys room for a higher rating.

Plan the change schedule before you buy

A filter only works while air moves through it, and a loaded filter works less well than a fresh one. The makers in this guide state spans from every 60 to 90 days for the Amazon Basics 6 pack to up to 3 months for the Simply 20x25x1, and the Lennox and BNX listings state no interval.

Set a calendar note for the first change, then look at the old panel when you pull it out. A gray, matted surface with visible dust means the interval fits, and a panel that is packed solid should have been changed sooner. Homes with pets or heavy dust loads will sit at the short end of any stated span. Buy the pack size that matches the schedule you will actually keep.

Look at frame build and pack size

Frame build decides whether a panel keeps its shape as it loads. The picks in this guide use beverage board frames, with wire mesh support on the Amazon Basics panel, a moisture resistant backing on the Aerostar line, and a single piece recycled cardboard frame on the BNX panel.

A sturdy frame with an airflow arrow printed on the edge makes the change faster and cuts the chance of installing the panel backward. A 2 pack suits a household that wants a spare, while a 6 pack suits a household that wants a full year of changes in one order.

FAQ

These answers cover the points that come up most often when a household moves to a higher MERV filter. Each answer sticks to the specs in this guide and to general furnace practice. Read them in order, or jump to the question that matches your own system.

Can a furnace filter help with allergies and asthma?

A furnace filter captures airborne particles such as pollen, dust mite debris, mold spores, pet dander, and smoke while the fan runs, and a higher MERV rating captures smaller particles. No filter in this guide is described as a cure for any condition.

What a filter can do is cut the particle load in the air that passes through the ducts, one part of a wider indoor air plan that also covers dusting, vacuuming, bedding, humidity, and ventilation. The EPA guidance quoted in this guide points to MERV 13 as the usual target. Talk with a clinician about symptoms, and talk with a heating technician about the right rating for your system.

What MERV rating fits most homes?

MERV 13 fits most modern homes with a standard 1 inch slot, and it is the rating the EPA guidance in this guide recommends as a starting point. Five of the six filters in this guide carry MERV 13. That share is no accident: MERV 13 has become the common residential target.

MERV 11 fits homes with older furnaces, weak blowers, or a stated MERV limit in the manual, and it still captures pollen, dust mite debris, mold spores, and pet dander. MERV 16 fits deep media cabinets only. When in doubt, pick the highest rating your manual allows.

How often should a furnace filter be changed?

The makers in this guide state spans from every 60 to 90 days to up to 3 months, and two of the six listings state no interval at all. The right span depends on the home: pets, dust, and long fan runtimes all shorten it. That range is wide, so the rest of this answer explains how to narrow it.

Start with the maker span where one is stated, then look at the old panel. A panel that is gray and matted is ready to go, and a panel that is packed solid was left too long. Keep a spare panel beside the furnace so the next change is easy.

Why is the actual size smaller than the nominal size?

Nominal size is a rounded label, and actual size is what the panel measures. Makers build panels slightly smaller than nominal so they slide into the slot without binding. The gap is normal, and the listed actual size is the number to trust. Measure the slot before you order.

In this guide the 16x25x1 panels measure 15.75 or 15 11/16 inches on the short side, and the 20x25x1 panels measure 19.50 or 19.75 inches, with depths of 0.75 or 3/4 inches. The Lennox box filter measures 24.8 x 19.8 x 4.3 inches against a nominal 20x25x5. Always compare the actual size to your own measurement of the slot.

Do carbon layers or deep pleats change the choice?

A carbon layer adds odor handling to a pleated filter, and a deep pleat adds media area, but neither changes the two facts that decide fit: nominal size and actual size. The Lennox X6675 uses carbon fiber in a deep 5 inch box, while the other five picks are thin pleated panels without a carbon layer.

If odors are a concern, a carbon layer can be worth seeking, but it does not replace a correct MERV rating or a correct size. Deep pleats help most in a deep cabinet, where the extra media keeps resistance low. For a standard 1 inch slot, the pleat count and the frame build matter more than the depth.

Conclusion

Start with the slot size, pick MERV 13 for most 1 inch systems, and step up to the MERV 16 Lennox box filter only with a media cabinet. Change the panel on schedule, and the right filter will keep working quietly in the background. Measure twice, match the actual size, and keep a spare panel beside the furnace so the next change happens on time.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.