Updated Nov 17, 2026· 16 min read

Key takeaways

  • Six floating shelves and wall-mounted nightstands compared on size, weight limits and storage, so you can free up floor space and keep your lamp within reach.

A floating shelf by the bed holds a lamp, a book and a phone without using floor space, yet the wrong one sags under a glass or pulls out of the wall. The best floating shelves for nightstands pair the right anchors with the right load, and this guide compares six of them, from a simple wall shelf to drawer nightstands that mount at any height.

Quick verdict

If you want a short answer, start with a plain shelf when you keep only a lamp and a book by the bed, and pick a drawer model when you need closed storage too. The six picks below cover both paths, plus a two-piece set for couples and a wide two-drawer table for bigger rooms.

The IKEA LACK suits the lightest loads with a tiny footprint, while the Costway and PEXFIX add two drawers each. The Flynama and Loheer pair a drawer with open shelves in warm wood tones, and the Nathan James Jackson set gives both sides of the bed a drawer, a cubby and a cord hole.

Product Type Best for Key spec Main limit
IKEA LACK Wall Shelf, black-brown Plain wall shelf Light loads and tiny rooms 11 3/4 in wide, 6.5 lb load Very low weight limit
Costway Modern Floating Nightstand, White Two-drawer wall table Closed storage at any height 2 drawers, large tabletop No dimensions stated on the page
PEXFIX Floating Nightstand, Gray Two-drawer wall table Small rooms and gray decor 16.5 in wide, MDF frame Adult assembly, tools not included
Flynama Floating Nightstand, Macadamia Drawer and shelf wall table Warm wood tones and open storage 14 in wide top, 2-tier shelf Single drawer only
Loheer Floating Nightstand, Dark Walnut Drawer and shelf wall table Dark wood and compact rooms 14 in wide top, 2-tier shelf Particle board build
Nathan James Jackson, White, Set of 2 Drawer and cubby wall set Couples and cable management 16 in wide, cord hole, 33 lb top 70 minute assembly per set

How we selected the best floating shelves for nightstands

Every pick in this guide comes from a page we opened and read, either a maker page or a listing page with stated dimensions and features. We favored models with clear measurements, stated weight limits and mounting hardware that suits real walls, from drywall to solid masonry.

We looked for a mix of plain shelves, drawer tables and shelf-and-drawer combos so different rooms and habits are covered, and we noted stated dimensions, weight limits and assembly notes where the pages state them. No pick here was handled in person, and where a page stays silent, the guide says so instead of filling the gap.

Six floating shelves for nightstands worth a closer look

These six pieces cover the main ways to float a bedside: a plain shelf for the lightest loads, two-drawer tables for closed storage, drawer-and-shelf combos in warm wood, and a matched set with cable management. Each one below lists its stated size, its mounting and its limits.

IKEA LACK Wall Shelf, black-brown

This small wall shelf is the simplest bedside in this guide, and it suits rooms where a lamp and a book are all the nightstand needs to hold. Its 11 3/4 inch width fits beside any bed, and the hidden brackets leave no visible hardware, so the shelf seems to float on the wall.

It fits tiny bedrooms, dorms and guest rooms where floor space is precious, and it works as a second shelf above a taller table. Owner comments on the maker page describe using it as a nightstand, and the black-brown finish suits dark wood beds and plain white rooms alike.

The maker lists the size as 11 3/4 by 10 1/4 inches and describes hidden suspension brackets included with the shelf. The stated maximum load is 6.5 pounds, depending on the type of wall and anchor, and the page notes that the shelf may be combined with other products in the LACK series. The listing shows the shelf in stock.

The 6.5 pound limit is the main constraint, so a heavy lamp, a stack of books and a full water glass must not share it at once. Owner comments on the maker page note that mounting hardware is not included and that finding the right screws and anchors takes care, especially on drywall, where the shelf can sag if the anchors pull out.

What stands out:

  • Tiny 11 3/4 inch footprint fits anywhere
  • Hidden brackets for a clean floating look
  • Combines with other LACK pieces
  • Simple to wipe clean

What to watch:

  • Only 6.5 lb maximum load
  • Mounting hardware not included
  • Sags on drywall without proper anchors

Buy it if you need the smallest floating shelf for a lamp and a book, and you can anchor it well. Skip it if you need drawers, a heavy lamp, or a table that holds more than a few light items.

Costway Modern Floating Nightstand, White

This white wall table pairs a large tabletop with two drawers, and it suits bedrooms where closed storage matters but floor space does not exist. It mounts at any height you choose, so the top can sit level with your mattress, and the white finish brightens small rooms.

It fits small apartments, dorms and guest rooms where a floor-standing table would block the walkway. The two drawers hide chargers, medicines and small clutter, and the large tabletop holds a lamp, a book and a glass of water at once.

The listing page describes a large tabletop with 2 convenient drawers, and notes that the included heavy-duty mounting kits are designed specifically for solid walls. It mounts at your preferred height, it comes in one or two pieces, and it is listed in black, gray and white. The listing shows the table in stock.

The page we opened does not state dimensions or a weight limit, so measure the listing before you plan the space, and keep loads light until you confirm the size. The mounting kit suits solid walls, so drywall needs its own anchors, and the white finish shows marks more than a wood grain would.

What stands out:

  • Two drawers for closed storage
  • Mounts at any height you choose
  • Heavy-duty mounting kit for solid walls
  • Available as one piece or a pair

What to watch:

  • No dimensions stated on the page we opened
  • No weight limit stated on the page
  • Mounting kit suits solid walls

Buy it if you want two drawers on the wall and you like choosing the exact mounting height. Skip it if you need stated dimensions before ordering, your walls are drywall, or you want an open shelf as well.

PEXFIX Floating Nightstand, Gray

This gray wall table pairs two pull-out drawers with a spacious top, and it suits small bedrooms where a floating design makes the room feel larger. Its 16.5 inch width gives real drawer storage without touching the floor, and the open space beneath makes cleaning simple.

It fits small bedrooms, studios and guest rooms where every inch counts, and the gray finish blends with many themes. The two drawers hold daily essentials, and the spacious top keeps books, glasses or cups within easy reach through the night.

The listing page lists the overall dimensions as 11.5 inches high by 16.5 inches wide by 12 inches deep, with a weight of 15.43 pounds and a frame of MDF. The tabletop is 1.5 inches thick, the top surface wipes clean, and the listing notes a 90 day limited warranty. Mounting hardware for solid walls is included, and the listing shows the table in stock.

Assembly is for adults and tools are not provided, so have a drill and the right anchors ready before you start. The MDF frame will not take the same knocks as solid wood, and the gray finish shows dust more than a dark wood tone would.

What stands out:

  • Two pull-out drawers in a floating design
  • Wide 16.5 inch top for books and glasses
  • Thick 1.5 inch tabletop
  • Mounting hardware for solid walls included

What to watch:

  • Adult assembly with tools not provided
  • MDF frame rather than solid wood
  • Gray finish shows dust

Buy it if you want two drawers on the wall in a clean gray finish. Skip it if you dislike assembly, you want solid wood, or you need an open shelf as well.

Flynama Floating Nightstand, Macadamia

This macadamia wall table pairs a single drawer with a two-tier open shelf, and it suits bedrooms where books and chargers need open storage and personal items need a hiding place. Its warm modern finish suits contemporary rooms, and the 14 inch top fits a lamp, a clock and small decor.

It fits bedrooms where the nightstand holds a mix of display and private items, and where a warm wood tone softens white walls. The drawer hides personal items to keep the surface clear, while the two open tiers keep books and chargers within reach.

The listing page describes a single drawer, a two-tier open shelf and a roomy top surface, with a tabletop of 14 inches wide by 10.8 inches deep. The build is particle board with a contemporary macadamia finish, assembly is required, and the listing shows the table in stock.

One drawer is the whole closed storage story, so bulkier items must live on the open shelves. The particle board build needs gentle care with wet glasses, and the open tiers collect dust, so a regular wipe keeps them looking their best.

What stands out:

  • Drawer plus two-tier open shelf
  • Warm macadamia finish
  • 14 inch top fits a lamp and a clock
  • Wall-mounted for easy cleaning beneath

What to watch:

  • Single drawer only
  • Particle board build
  • Open shelves collect dust

Buy it if you like a warm wood look with a drawer and open shelves. Skip it if you need two drawers, a solid wood build, or a table that hides everything.

Loheer Floating Nightstand, Dark Walnut

This dark walnut wall table pairs a single drawer with a two-tier shelf in a compact footprint, and it suits bedrooms where dark wood adds warmth without taking floor space. Its 14 inch top gives a lamp and a phone a home, while the divided shelf keeps books and chargers separated.

It fits small bedrooms, guest rooms and apartments where the bed sits close to the wall. The dark walnut finish gives the particle board build a warm modern look, and the compact body mounts neatly beside a bed without crowding the walkway.

The listing page lists the body as 13.23 inches long, 14.02 inches wide and 11.61 inches high, with a top of 14 inches wide by 10.8 inches deep. The build is particle board in dark walnut, assembly is required, and the listing shows the table in stock.

One drawer holds only small personal items, so the open shelf carries the rest. The particle board build needs care with spills, and the dark finish shows dust and fingerprints more than a light wood tone would.

What stands out:

  • Drawer plus divided two-tier shelf
  • Dark walnut finish adds warmth
  • Compact 14 inch top
  • Wall-mounted to free the floor

What to watch:

  • Single drawer only
  • Particle board build
  • Dark finish shows dust

Buy it if you want dark wood tones with a drawer and open shelves in a compact size. Skip it if you need two drawers, a solid wood build, or a lighter finish.

Nathan James Jackson, White, Set of 2

This white pair gives both sides of the bed a floating nightstand with a closed drawer, an open cubby and a cord hole, and it suits couples who charge devices overnight. Its Scandinavian modern look brings clean lines to the room, and the wall-anchored system keeps the floor clear for cleaning.

It fits primary bedrooms with two sleepers, guest rooms with twin beds and anyone who wants matching tables without hunting for a pair. The drawer hides electronics that are not pretty to look at, and the open cubby with its cord hole keeps cables within reach but out of sight.

The listing page lists each unit as 13 inches long, 9 inches high and 16 inches wide, sold as a set of 2. The tabletop carries a stated weight limit of 33 pounds and the drawer 11 pounds, wall-anchored bolts are provided for installation into drywall, and assembly takes about 70 minutes. The finish is matte white paint.

At 9 inches high each unit is shallow, so tall items must sit on the top rather than inside. Assembly takes about 70 minutes for the set, and the white finish shows scuffs more than a wood tone would, so a soft cloth and gentle care keep it looking fresh.

What stands out:

  • Matching set of 2 for both sides of the bed
  • Drawer plus open cubby with a cord hole
  • Tabletop limit of 33 lb, drawer 11 lb
  • Wall-anchored bolts included for drywall

What to watch:

  • Shallow 9 inch height per unit
  • 70 minute assembly for the set
  • White finish shows scuffs

Buy it if you want a matching pair with cable management and real weight limits. Skip it if you need deep storage, you dislike assembly, or you want a single table.

Buying guide for floating shelves for nightstands

A floating nightstand lives or dies by its mounting, so check the wall, the anchors and the load before you fall for the look. The notes below walk through each choice in turn, so you can mount once and trust it. Each note covers one choice, from studs and height to weight limits and storage.

Find the studs before you drill

A floating shelf hangs entirely from its anchors, so the wall behind it matters more than the shelf itself. Studs give the strongest hold, and the Jackson set includes wall-anchored bolts for drywall, while the Costway and PEXFIX kits are designed for solid walls.

Use a stud finder and mark the studs before you drill, and match the anchor to your wall type, since drywall, plaster and brick each need different hardware. If you cannot hit a stud, use heavy-duty wall anchors rated above the load you plan, and test the mount with a firm pull before you load the shelf.

Match the height to your mattress

A floating nightstand works best when its top sits near the top of your mattress, so you can reach a glass of water or a phone without sitting up or stretching down. A table far below the mattress forces an awkward reach, while one far above it puts the lamp in your line of sight.

Wall mounting lets you choose the exact height, which is the great advantage over a floor table. Measure from the floor to the top of your mattress, mark that height on the wall, and mount the shelf so its top lands within a few inches of the mark.

Check the weight limit before you load it

A stated weight limit tells you how much the shelf can hold without strain, and it matters most on a floating mount. The LACK lists a maximum load of 6.5 pounds, while the Jackson lists 33 pounds for the tabletop and 11 pounds for the drawer, so the two suit very different loads.

Keep heavy items low and close to the wall, where the mount carries them best, and spread the load across the surface instead of piling it at the front edge. If a page does not state a limit, treat the shelf as light duty and keep the load modest, especially with a lamp and a full water glass.

Choose drawers, shelves, or a mix

Drawers hide chargers, medicines and small clutter, while open shelves keep books and glasses easy to grab in the dark. A mix of both, such as a drawer over a shelf, suits most people, since the private items go in the drawer and the daily items stay on the shelf.

Think about what actually lives by your bed before you pick a layout. If the list is long and private, favor two drawers, as on the Costway or the PEXFIX. If the list is short and you like to see everything at a glance, a drawer plus open tiers like the Flynama or Loheer will serve you well each night.

Measure the footprint and the walking space

Width and depth decide whether the shelf fits between the bed and the wall, and whether you can still walk past it at night. The pieces in this guide run from 11 3/4 inches to 16.5 inches wide and from 10 1/4 inches to 12 inches deep, so most of them suit a gap of about two feet.

Measure the gap with a tape, then leave room for the bed skirt, the baseboard and your own feet when you step out of bed. A shelf that looks fine on a page can still block a drawer or a door swing, so check anything nearby before you drill.

Frequently asked questions about floating shelves for nightstands

These are the questions that come up most when a bedside table has to hang on a wall instead of standing on the floor. The answers below stick to what the makers state and to plain bedroom sense. Read them before you drill, since a wrong anchor is harder to fix than a wrong color.

How much weight can a floating nightstand hold?

It depends on the model and the wall, so check the stated limit for the exact piece you buy. The LACK lists a maximum load of 6.5 pounds, while the Jackson lists 33 pounds for the tabletop and 11 pounds for the drawer, and both limits depend on the wall type and the anchors used.

Keep the load modest when no limit is stated, and spread heavy items across the surface instead of piling them at the front edge. A lamp, a book and a glass of water suit most floating shelves, while a stack of hardcover books belongs on a floor-standing table.

Can I mount a floating nightstand on drywall?

Yes, with the right anchors, and the Jackson set includes wall-anchored bolts made for drywall installation. The Costway and PEXFIX mounting kits are designed for solid walls, so drywall needs its own heavy-duty anchors rated above the load you plan.

Find the studs first, since a screw into a stud holds far more than any drywall anchor. If you cannot hit a stud, use toggle bolts or heavy-duty anchors, and test the mount with a firm pull before you load the shelf.

How high should I mount a floating shelf by the bed?

Mount it so the top sits near the top of your mattress, which lets you reach a phone or a glass of water without sitting up. Measure from the floor to the top of your mattress, mark that height on the wall, and mount the shelf so its top lands within a few inches of the mark.

The great advantage of a floating shelf is that you choose the height, so a tall mattress gets a higher shelf and a low platform bed gets a lower one. Sit on the bed and reach for the spot where the shelf will go, since your own arm tells you more than any number on a page.

Do floating nightstands need a stud?

A stud gives the strongest hold, but a floating nightstand can mount without one when the anchors suit the wall and the load. Heavy-duty wall anchors rated above your planned load can carry a light shelf on drywall, while solid walls take masonry anchors instead, so match the anchor to the wall you have.

Check the mounting kit that comes with the piece, since the Jackson bolts suit drywall and the Costway and PEXFIX kits suit solid walls. When in doubt, favor the stud, and keep the load light until the mount has held for a few days.

What should I keep on a floating shelf at night?

Keep the nightly essentials within reach: a lamp, a phone, a book and a glass of water. The LACK holds that much with its 6.5 pound limit, while the Jackson top with its 33 pound limit takes a heavier lamp and a stack of books as well. Keep the rest in the drawer.

Put chargers and medicines in a drawer, as on the Costway, PEXFIX or Jackson, and keep the top clear enough to find things in the dark. Avoid piling items at the front edge, where they strain the mount and slide off most easily.

Conclusion

Start with the LACK for the lightest loads, the Costway or PEXFIX when you need two drawers, and the Jackson set when both sides of the bed need cable management. Find the studs first, respect the stated weight limit, and pick the shelf that fits your wall as well as your room. Measure twice, drill once, and enjoy the clear floor beneath your bed.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.