Key takeaways
- Compare six fleece fabrics for making no sew blankets, with widths, weights, pill-resistance notes and trade-offs, plus tips on cutting, fringe, and tying.
Tie blankets look simple, yet thin or pilly fleece leaves a fringe that curls, sheds and wears out after a few washes. The best fleece for making no sew blankets is anti-pill polyester, wide enough to cut two clean panels and thick enough to hold a fringe. This guide compares six yardage options and what to check before you cut.
Quick verdict on the best fleece for making no sew blankets
For most crafters, anti-pill polyester fleece at 60 inches wide is the right base, because the fringe stays flat and two panels cut cleanly. Hobby Lobby anti-pill fleece is the easy everyday pick, while Polartec options suit anyone who wants a stated weight.
| Fabric | Type and material | Best for | Key spec listed | Main trade-off |
|---|---|---|---|---|
| Hobby Lobby Plaid Anti-Pill Fleece | Printed anti-pill polyester | Patterned tie blankets | 60 in wide, all-polyester | Not for sleepwear, 7 yard max cut |
| Hobby Lobby Anti-Pill Fleece (solid) | Solid anti-pill polyester | Classic two-color tie blankets | 58 to 60 in, medium weight | Width is a range |
| Lilly Craft Anti-Pill Fleece | Solid anti-pill polyester | Large color range by the yard | all-polyester, 58 to 60 in | Weight is not stated |
| Spoonflower Polartec Fleece | Branded fleece, printed | Custom-print panels | 60 in, 251 GSM, pill-resistant | Printed on demand |
| Polartec Classic300 (Simplifi) | Heavy double-velour fleece | Thick, warm blankets | 60 in, 362 GSM | Heavy for a first project |
| Shannon Cuddle 3 Solid Minky | Plush minky polyester | Soft backing panel | 58/60 in, 3 mm pile | Slippery to cut |
How we selected fleece for tie blankets
We looked for fleece that stores or makers currently list with a width, a fiber content and a statement about pilling or use, then favored listings that publish weight. Anything missing a decisive spec is described with the gap named instead of guessed.
- Polyester fiber content stated on the listing
- Width stated, ideally a full 60 inches
- Anti-pill or pill-resistant wording from the seller or maker
- Weight in GSM stated where available
- Suitability for blankets or tie projects according to the listing
Every item here is yardage rather than a finished blanket, so we judged how each one cuts, fringes and washes in general terms. We did not rank by color or print, since stock changes often. When a listing did not give a number, such as weight for the Hobby Lobby and Lilly Craft fleeces, this article says so.
Best fleece for making no sew blankets, reviewed
Each fabric below is sold by the yard, and two matching or contrasting panels become one tie blanket. The notes cover who each one suits, what the listings state, and where each falls short. Check widths and cut limits on the page before you buy for a large project.
Hobby Lobby Plaid Anti-Pill Fleece
Hobby Lobby Plaid Anti-Pill Fleece is for crafters who want a patterned tie blanket without printing a custom design. The plaid listing states a 60 inch width, all-polyester and a maximum cut length of 7 yards, which is more than enough for a blanket in any size.
The same page says the fabric is not for sleepwear, a reminder that this is a blanket and craft fabric. A plaid pattern hides uneven fringe cuts well, which helps a first-time maker, and it pairs naturally with a solid fleece as a second panel.
- Material: all-polyester, per the listing
- Width: 60 inches; maximum cut length 7 yards
- Pros: full 60 inch width, patterns hide uneven fringe
- Cons: not for sleepwear, weight not stated
- Buy if you want a patterned panel from a physical store
- Skip if you need a stated weight in GSM
Hobby Lobby Anti-Pill Fleece Fabric
Hobby Lobby Anti-Pill Fleece Fabric in solid colors is the everyday choice for a classic two-color tie blanket. Hobby Lobby anti-pill fleece listings describe all-polyester, a 58 to 60 inch width and a medium weight, across many solid colors in the fleece aisle.
One purple solid page is marketed for colorful, cozy tie blankets, which fits this use directly. Because the width is a range, measure the bolt before you cut so two panels match exactly, and trim any selvage that curls.
- Material: all-polyester, medium weight, per listings
- Width: 58 to 60 inches
- Pros: many solid colors, direct tie-blanket marketing
- Cons: width is a range, no GSM stated
- Buy if you want a simple solid for a two-panel blanket
- Skip if you need an exact weight
Lilly Craft Anti-Pill Fleece
Lilly Craft Anti-Pill Fleece is the online option for a wide range of solid colors, sold by the yard. The Walmart listing states all-polyester, 58 to 60 inches wide and an anti-pill finish. It suits crafters who already know the exact color they want and prefer to shop from home.
The listing does not publish a weight, so the thickness is a guess until you handle the cloth. Because it is sold by the yard from a marketplace seller, check the current cut length and colors, and buy the full amount for both panels in a single order so the dye lot matches.
- Material: all-polyester, per the listing
- Width: 58 to 60 inches
- Pros: large color range, sold by the yard
- Cons: weight is not stated, dye lots can vary by order
- Buy if you want a particular color not found in stores
- Skip if you want to feel the fabric first
Spoonflower Polartec Fleece
Spoonflower Polartec Fleece is for crafters who want a custom printed panel on a branded fleece. The listing describes a 60 inch wide, all-polyester fleece at 251 GSM that resists pilling, and calls it pill-resistant, high-loft fleece for blankets and apparel.
You upload or choose a design, then pair the printed panel with a plain fleece for a tie blanket. It is a route to a custom look, so it makes sense for a gift or keepsake rather than everyday blankets.
- Material: all-polyester, 251 GSM, per the listing
- Width: 60 inches
- Pros: stated weight, custom prints, pill-resistant
- Cons: print-on-demand, requires design choices
- Buy if you want a one-of-a-kind gift panel
- Skip if you only want plain solids
Polartec Classic300 Fleece
Polartec Classic300 Fleece, sold by Simplifi, is for makers who want a heavy, warm blanket. The listing states a 362 GSM weight, a 60 inch width and a double velour face, and it is marked pill resistant and sold in half yard increments. It is a fleece for someone who wants a dense, substantial blanket that feels closer to a heavy throw.
At that weight the fringe is thick and hard to tie, so it works best with a small fringe cut and a firm knot. It is also a poor match for a first project because it is heavy to handle and cut, but the result can be a very cushioned blanket.
- Material: Polartec Classic300 double velour, per the listing
- Width: 60 inches; weight 362 GSM
- Pros: thick, pill resistant, half-yard cuts
- Cons: heavy, harder to tie, bulky to wash
- Buy if you want a dense, warm blanket
- Skip if you want a light tie blanket
Shannon Cuddle 3 Solid Minky
Shannon Cuddle 3 Solid Minky is for crafters who want a plush, very soft panel. Retailers list it as all-polyester, 58 to 60 inches wide, with a 3 mm pile, and sell it for baby products and quilting. It is the plush choice when softness matters more than speed, and it makes a lovely backing for a gift blanket.
Minky is slippery to cut, and its pile sheds trimmed fibers, so many makers use it as one panel and pair it with a fleece on the other side. One retailer lists machine wash cold, no fabric softener and tumble dry low for a Teal listing, so follow the label on the bolt.
- Material: all-polyester, 3 mm pile, per retailers
- Width: 58 to 60 inches
- Pros: very soft, many colors, plush feel
- Cons: slippery to cut, sheds when trimmed
- Buy if you want a soft panel for a gift blanket
- Skip if you want the simplest cut
Buying guide for tie blanket fabric
Good tie blankets depend on fabric width, thickness and the way you cut the fringe. These sections explain what to check on a listing and how to handle the cloth, so the finished blanket lies flat, ties neatly and survives repeated washing in a busy home.
How to pick fleece for making no sew blankets
Start with anti-pill polyester at 60 inches wide, because two panels of the same width cut into a clean rectangle. Listings that say anti-pill or pill-resistant matter more than any other wording, since fleece that pills makes a blanket look old quickly.
Next compare weight. A medium weight, as Hobby Lobby lists, gives a soft blanket that is easy to tie. A heavy fleece like the 362 GSM Polartec Classic300 makes a very warm blanket but a thick fringe. Choose weight by how the blanket will be used and how bulky a fringe you can tie.
Width, yardage and how much to buy
Common craft guidance for a lap-size tie blanket is about one and a half yards per panel, while a larger throw takes about two yards per panel. These figures are general craft guidance, not a maker rule. With 60 inch wide fleece, each panel is then roughly 60 inches by 54 to 72 inches before you cut fringe.
Buy both panels at once from the same store or order so widths and dye lots match, since a small width difference shows as a crooked edge. Add a little extra for trimming selvage and cutting the corner squares. If a listing uses a 58 to 60 inch range, plan from the narrower number.
Cutting the fringe and tying
Lay both panels together with the right sides out, square the edges, and trim any curled selvage. Cut a small square from each corner so the knots do not bunch there. Cut fringe strips of equal width and length along all four sides, often about an inch wide and four to six inches long as common guidance.
Tie each pair of strips in a double knot. Pull each knot snug but not so tight that the blanket puckers. Work around the blanket in order so the panels stay flat. Trim uneven ends at the end, since small differences show quickly in a long fringe.
Pilling, shedding and washing
Anti-pill finishing helps but does not make fleece pill-proof, and the listings above do not promise that. Wash fleece blankets cool, with similar colors, and dry on low heat. Heat can melt or flatten the pile, so follow the care instructions on the bolt or listing.
Skip fabric softener unless the maker advises it, because softener can coat synthetic fibers and reduce their feel. Wash a new tie blanket once before gifting to shed loose fibers, and check the knots after the first wash for any that have loosened.
Tools that make cutting easier
A sharp rotary cutter and a long ruler give straighter fringe than scissors, and a cutting mat protects the table. If you use scissors, choose a long-bladed pair and cut in one smooth motion. Mark the corner squares with a small template cut from cardboard so every corner matches.
Stack the two panels with the wrong sides together, smooth them flat and clip the edges before cutting. A stack that shifts produces fringe that does not line up for tying. Cut one side at a time, turn the blanket, and keep the fabric from hanging off the table where its weight can pull the layers apart.
Common mistakes to avoid
The most common problem is uneven panels. Fleece stretches in one direction, so two panels cut from different bolts can differ by an inch or more across the width. Cut both panels at the same time, and trim to the narrower measurement before you start the fringe.
Other mistakes include tying knots too tight, which puckers the edge, and cutting fringe too long, which tangles in the wash. Skipping the corner cut leaves a bulky knot that is hard to tie. Finally, washing with towels or zippered items can snag the pile, so wash tie blankets with soft items only.
Safety and age notes
Some fleece listings are marked not for sleepwear, so use these fabrics for blankets and throws rather than garments. For babies, follow safe-sleep guidance from pediatric groups, which advises keeping loose blankets out of an infant sleep space, and ask a pediatrician if you have questions.
Keep long fringe away from small children and pets that chew, since knots and strips can be pulled loose. No fabric is chew-proof, so supervise play and replace a blanket that frays or comes apart at the knots.
Fleece tie blanket FAQ
These questions come up when people plan a tie blanket for the first time, from how much to buy to how to wash it. The answers use the listing details above and common craft guidance, and they leave out any numbers that none of the pages stated, so check labels as well.
How much fleece do I need for a no sew blanket?
Common craft guidance is about one and a half yards of 60 inch wide fleece for each panel of a lap blanket, so about three yards in total. A larger throw takes about two yards per panel, for about four yards in total, which is a common size for gifts.
These numbers are common guidance rather than a maker rule, so adjust for your own size. Buy a little extra for trimming, and buy both panels from the same order so the width and dye match.
Does the fleece have to be anti-pill?
Anti-pill fleece is not required, but it is the better choice for a blanket that will be washed often. Regular fleece can form small balls of fiber as it rubs, which makes the blanket look worn and the fringe look fuzzy after only a few washes in a busy household.
Several listings in this article describe an anti-pill finish, and the Spoonflower and Simplifi Polartec pages say pill resistant. No finish makes fleece pill-proof, so expect some fuzz over time and wash gently.
Can I use minky for a tie blanket?
Yes, many makers use minky as one panel. Shannon Cuddle 3 Solid Minky is listed at 58 to 60 inches wide with a 3 mm pile, and retailers sell it for baby products. It is slippery, so pin or clip the layers together before you cut the fringe, and cut with sharp scissors or a rotary cutter.
Pair it with fleece on the other side to make cutting and tying easier. Check the care instructions on the bolt, since one retailer lists cold wash and low tumble dry for a single color.
Is a no sew blanket safe for a baby?
A tie blanket is a throw, a stroller cover or a play blanket, not a crib blanket for a baby. Follow safe-sleep guidance from pediatric groups, which advises keeping loose blankets out of an infant sleep space, and ask a pediatrician if you have questions.
Fringe and knots can come loose, so supervise any child with a tie blanket. Hobby Lobby fleece pages also note that their fabric is not for sleepwear, so do not use it for garments.
How do I wash a fleece tie blanket?
Use the care line on the bolt or listing for your exact fleece. A general approach is to wash cool with similar colors, avoid fabric softener, and dry on low heat. High heat can flatten or melt the pile, which ruins the soft feel of the blanket for good.
Check the knots after the first wash and retie any that loosened. If the fringe tangles, shake the blanket out before drying so the strips do not wrap into a mat.
Mixing fleece with other fabrics
Many makers pair two different fabrics, such as a printed fleece on top and a solid on the back, or minky against fleece. This works well if both fabrics are close in width and stretch, so the panels hang evenly when you lift the blanket, and neither side bunches or sags.
Check that both fabrics tolerate the same wash and dry settings, because a blanket with one heat-sensitive side limits how you can launder it. A heavy fleece such as Polartec Classic300 paired with a thin fleece feels uneven, so match weights when you can. Pin the panels, cut them together, and keep the pile direction aligned.
Color and pattern choices
Color and pattern change how the finished blanket looks and wears. Dark solids show lint and pet hair, light solids show stains, and plaids or prints hide both. Choose a two-color combination that suits the person, such as team colors, a favorite print, or a pairing for a nursery.
Solid colors let the fringe stand out, while a busy print makes uneven fringe less obvious. If you are making several blankets for a group, buy all of the same fleece in one order so the dye lots match, then make the knots uniform so the set looks like a matched collection.
Can I make a no sew blanket from one piece of fleece?
Yes, a single piece of fleece with a cut fringe edge or a simple blanket-stitch border works as a quick throw for a sofa, a car or a dorm room. It is lighter and thinner than a two-layer tie blanket, and it is best for a stroller cover, a pet mat or a car blanket.
A single layer curls less if the fleece is anti-pill and medium weight, and a fringe cut along the edge keeps the look tidy without any stitching. Heavy fleece such as Polartec Classic300 makes a single layer that is already warm, though it costs more effort to cut. Keep it away from sleep spaces for infants.
Conclusion
For most people, anti-pill polyester fleece at 60 inches wide is the best fleece for a tie blanket, and Hobby Lobby anti-pill fleece is the easiest place to start. Choose Polartec when you want a stated weight, add minky for a plush panel, and tie neat knots. Keep blankets out of infant sleep spaces.
Write Your Review
No reviews yet. Be the first to share your experience!