Key takeaways
- The best dishwashers with heated drying finish every load dry and ready to put away. Compare the six models by drying system, capacity, noise and wash cycles.
A dishwasher that leaves glasses wet and plastics beaded with water adds a chore after every cycle. The best dishwashers with heated drying use a heating element, often with a fan, to finish loads dry enough to put away. This guide compares six models with real heated drying systems, so you can match drying power and noise to your kitchen.
Quick verdict
The KitchenAid KDPM604KPS leads this list because its ProDry system pairs a heating element with a fan, and it runs at 44 dBA with room for 16 place settings. The GE GDT670SGVWW follows close behind with Dry Boost and a strong bottle wash setup, while the Whirlpool WDT750SAKZ suits everyday family loads at a lower capacity.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| KitchenAid KDPM604KPS | Built-in, 24 inch | Quiet full-size kitchens | ProDry element and fan, 44 dBA | No Wi-Fi |
| GE GDT670SGVWW | Built-in, 24 inch | Plastics and bottles | Dry Boost, Calrod 800 watts | No half load option |
| Whirlpool WDT750SAKZ | Built-in, 24 inch | Everyday family loads | Recessed heating element, 47 dBA | 13 place settings only |
| Frigidaire Gallery FGID2479SF | Built-in, 24 inch | Large loads | EvenDry, 49 dBA, 14 place settings | Louder than the quietest picks |
| Sharp SDW6504MS | Built-in, 24 inch | Simple controls, hybrid tub | Heated Dry, 52 dBA | 12 place settings only |
| Midea MDF18A1AST | Built-in, 18 inch | Small kitchens | Heated Dry, 52 dB, 8 place settings | No third rack |
How we selected
Selection started from published specifications and maker drying descriptions, not from roundup claims. A model made this list only when a page actually opened stated a heated drying feature, such as a heating element, a fan-assisted dry system, or a named heated dry option, along with the capacity and noise figures quoted in its section.
Condensation-only models were left out on purpose. A dishwasher that dries by warming dishes in the final rinse and letting moisture settle on the tub walls uses no heating element for drying, so it does not fit this keyword even when the maker calls the result dry. The Bosch 300 Series with PureDry is the clearest example of that split, and it was not used here. Models that pair a heating element with a fan, or that list a heated dry option in their spec table, earned a place.
Availability also shaped the list. One candidate, the GE GDT545PGJWW, was dropped after the maker page stated that the model is no longer being manufactured.
Top heated drying dishwashers
These six models all state a heated drying feature on a page that opened during research, and they cover full-size built-ins, a slim 18 inch model and a mix of quiet and value picks. Each section below gives the exact drying system, capacity, noise level and the limits the maker lists.
KitchenAid KDPM604KPS
The KitchenAid KDPM604KPS is the strongest heated drying pick here because its Fan-Enabled ProDry System combines a heating element and fan for drying, and the maker lists the drying system type as fan dry with heating element. It holds 16 place settings, runs at 44 dBA, and offers 5 wash cycles across 3 racks.
This is a 24 inch fully integrated dishwasher with a stainless steel interior and a FreeFlex third rack that fits 6 inch glasses, mugs and bowls. The maker lists 7 wash levels and 5 wash arms, plus a Sani Rinse option that heats the final rinse water to 155 degrees F. An Extended ProDry option adds 15 minutes to the drying cycle for loads that need extra time. The unit measures 23 7/8 inches wide, 24 1/2 inches deep and 33 5/8 inches high, with a net weight of 105 lbs. It carries a 1 to 24 hour delay and an NSF certified rinse.
Limits are few but real. The maker lists no Wi-Fi, and the racks use nylon material rather than coated steel. The PrintShield finish needs only water and a soft cloth to clean, which suits households that want a low-effort front. The third rack adds real capacity for utensils and small items, which frees the lower racks for pots and plates.
- ProDry pairs a heating element with a fan for thorough drying
- 16 place settings with a FreeFlex third rack
- 44 dBA sound level suits open-plan kitchens
- Extended ProDry adds 15 minutes when a load needs more drying
- No Wi-Fi or app control
- Nylon rack material rather than steel racks
Buy it if you want the strongest heated drying system in this list and a quiet full-size machine. Skip it if you need app control or a panel-ready front.
GE GDT670SGVWW
The GE GDT670SGVWW uses Dry Boost technology, which the maker describes as outperforming standard heated dry dishwashers on hard-to-dry items such as plastics. The spec table lists the dry type as heated, and the Calrod heater is rated at 800 watts on high and 500 watts on low. It holds 16 place settings and runs at 45 dBA.
This is a 24 inch built-in top control dishwasher with a stainless steel interior and a full third rack. It offers 5 cycles and 11 options, including a 1-hour wash, steam prewash and a sanitize cycle. Four bottle wash jets clean baby bottles and tall bottles from the inside, and 40 deep-clean silverware jets blast the silverware basket from below. The maker lists a Piranha hard food disposer with stainless steel impellers, so no pre-rinse is needed. The unit measures 23 3/4 inches wide, 24 inches deep and 34 inches high, with a net weight of 99 lbs.
The main limit is the lack of a half load option, so small loads run the same full cycle as large ones. The listed model has a white finish, and the maker lists Wi-Fi as optional through a separate part. Dry Boost has normal, high and off settings, which gives control over drying intensity and energy use.
- Dry Boost targets plastics, the hardest items to dry
- Calrod heater rated at 800 watts on high
- 16 place settings with a full third rack
- Four bottle wash jets and a hard food disposer
- No half load option for small loads
- Wi-Fi needs a separate part
Buy it if plastics and bottles make up much of your load. Skip it if you often run small loads and want a half load setting.
Whirlpool WDT750SAKZ
The Whirlpool WDT750SAKZ fits this keyword through a recessed heating element and a Heated Dry option, with the spec table listing the dry type as heated. It holds 13 place settings, runs at 47 dBA, and offers 5 wash cycles with a third rack for utensils and small items.
This is a 24 inch fully integrated dishwasher with a stainless steel tall tub and a fingerprint resistant stainless steel front. The maker lists a sensor cycle that measures temperature, soil level and load size, plus a Sani Rinse option and a high-temperature wash option. A 1 to 24 hour delay lets you time the cycle to finish when you are home. The unit measures 23 7/8 inches wide, 24 1/2 inches deep and 33 5/8 inches high, with a net weight of 85 lbs. It is NSF certified and ENERGY STAR qualified, and the maker lists 3 spray arms and 5 wash levels.
The 13 place setting capacity is the main limit, since the other full-size picks here hold 14 or 16. The third rack is a cutlery tray style, which suits flatware and small tools rather than bowls. For a household that runs one full load a day, the capacity is enough, and the recessed element keeps the drying heat away from the lower rack.
- Recessed heating element with a Heated Dry option
- Sensor cycle adapts wash and dry settings to the load
- Stainless steel tall tub with a third rack
- 47 dBA sound level with a 1 to 24 hour delay
- 13 place settings, less than the 16 place picks
- Third rack is a cutlery tray, not a full multipurpose rack
Buy it if you want a straightforward heated dry dishwasher for daily family loads. Skip it if you need 16 place settings for large gatherings.
Frigidaire Gallery FGID2479SF
The Frigidaire Gallery FGID2479SF lists Heated Dry as a yes in its spec table and pairs it with the EvenDry system, which the maker describes as leaving dishes dry every time. It holds 14 place settings, runs at 49 dBA, and offers 7 cycles in a tall tub with a stainless steel interior.
This is a 24 inch built-in dishwasher with a Store-More removable third rack and a SpaceWise adjustable rack for oversized dishes. The OrbitClean wash system uses four times more water coverage for a complete clean, according to the maker, and the DishSense sensor adjusts cycle time to the soil level. A 30-minute Quick Clean handles lightly soiled loads fast, and a 24-hour delay start lets you set the cycle in advance. The unit measures 23 3/4 inches wide and 24 1/4 inches deep, with a minimum height of 33 3/4 inches and a product weight of 99.75 lbs. It is NSF certified and ENERGY STAR certified, with an annual energy use of 270 kWh.
At 49 dBA it is louder than the 44 dBA and 45 dBA picks, so it suits kitchens where the dishwasher runs while the house is busy rather than during quiet evenings. The maker also lists an Energy Saver option that dries without using heat, which gives a low-energy choice when drying speed does not matter.
- Heated Dry listed as yes, with the EvenDry system
- 14 place settings with a removable third rack
- 30-minute Quick Clean for lightly soiled loads
- Stainless steel interior with a stainless steel filter
- 49 dBA, louder than the quietest models here
- No Wi-Fi or app control listed
Buy it if you want 14 place settings and a fast 30-minute cycle with heated drying. Skip it if you need a very quiet machine for open-plan living.
Sharp SDW6504MS
The Sharp SDW6504MS lists Heated Dry as one of 4 options, alongside Half Load, Sanitize and Delay, and the maker states that the heated dry option is more dependable than condensation drying and works well on plastics. It holds 12 place settings, runs at 52 dBA, and offers 5 wash cycles.
This is a 24 inch front control dishwasher with a hybrid tub made of stainless steel with a heavy-duty plastic floor. The maker lists a soil sensor, a dual-stage filtration system, a child lock and a 1 to 24 hour delay start. The adjustable upper rack holds larger dishes and taller glasses, and fold-down tines in the lower rack make room for serving bowls and roasters. The unit weighs 70.55 lbs, uses 3.0 gallons of water per cycle in Normal mode, and has an annual energy use of 240 kWh. It is NSF certified and ENERGY STAR rated, with 2 spray arms including a stainless steel lower arm.
The 12 place setting capacity is the smallest among the full-size picks, and the 52 dBA sound level is the loudest here. The hybrid tub trades a full stainless interior for a lower weight and a simpler build, which suits buyers who want a basic machine with a real heated dry option and no extra smart features.
- Heated Dry option stated as more dependable than condensation drying
- Half Load option for smaller loads
- Adjustable upper rack and fold-down lower tines
- Light 70.55 lb build for easy installation
- 12 place settings only
- 52 dBA, the loudest sound level in this list
Buy it if you want a simple heated dry dishwasher with a Half Load option. Skip it if you need 14 or more place settings or very quiet operation.
Midea MDF18A1AST
The Midea MDF18A1AST is the slim pick here, an 18 inch built-in dishwasher that offers a Heated Dry option based on a heating element. The maker lists 3 options, Heated Dry, Hi-Temp and Sanitize, and the review page that opened during research describes the heated dry system as heating-element based. It holds 8 place settings and runs at 52 dB.
This is an 18 inch wide built-in with a stainless steel tub and 6 wash cycles: Heavy, Normal, ECO, Delicate, Quick and Rinse. The Hi-Temp option raises wash water up to 136 degrees F, and the Sanitize function heats water to 156.2 degrees F. It uses 2.5 gallons of water per cycle in Normal mode, weighs 54.6 lbs, and measures 18 inches wide, 33 inches high and 22 inches deep. A 1 to 24 hour delay start and a control lock are included, and the unit is ENERGY STAR certified with 2 rotary spray arms.
The limits match the size. There is no third rack, no Wi-Fi, and the filter needs manual cleaning. With 8 place settings it suits couples and small households, not large families, and heated dry sits on the control panel as one of 3 options, next to Hi-Temp and Sanitize.
- Heated Dry based on a heating element in an 18 inch body
- 8 place settings for small kitchens and apartments
- Sanitize up to 156.2 degrees F
- 2.5 gallons of water per cycle in Normal mode
- No third rack
- Manual filter cleaning, no Wi-Fi
Buy it if your kitchen fits only an 18 inch dishwasher and you still want heated drying. Skip it if you need room for 12 or more place settings.
Buying guide
Heated drying is not one system, so the buying choice starts with the drying hardware. This guide explains the three drying methods, how capacity and racks change drying results, what noise and cycle time mean in daily use, and how energy and rinse aid fit into the decision.
How heated drying works in a dishwasher in the best dishwashers with heated drying
A heated drying system uses a heating element inside the tub to warm the air after the final rinse, which speeds up evaporation from dishes, glasses and plastics. Some systems add a fan that moves the warm air across the load, which dries plastics far better than still warm air alone.
The KitchenAid ProDry system and the GE Dry Boost system both use this element-plus-fan pattern, while the Whirlpool and Sharp models use a heating element with a heated dry option. When you compare models, look for the words heating element or fan dry in the spec table, since a drying name alone does not prove an element is present.
Heated drying compared with condensation drying
Condensation drying warms the dishes in the final rinse and lets moisture settle on the cooler tub walls, with no heating element used for drying. It saves energy and protects plastics from heat, but plastics often come out wet because they cool fast and hold droplets.
Heated drying costs more energy per cycle but finishes plastics and deep containers far drier. If your loads hold many plastic containers, baby bottles or storage lids, a heated element matters more than a quiet rating. If your loads are mostly ceramic and glass, condensation drying may be enough, and the Energy Saver option on the Frigidaire model shows how a heated dry machine can also run a no-heat dry cycle when speed does not matter.
Capacity and rack layout
Capacity shapes drying results because crowded racks block warm air from reaching every item. The 16 place setting models here give each item more space, and a third rack moves flatware and small tools out of the lower racks, which opens airflow around plates and bowls.
The 13 and 12 place setting models still dry well, but they need careful loading to keep tall items from shading the items below them. The 8 place setting Midea suits small households, yet its two racks mean large pots and baking sheets may need a second load. Measure your largest plates and tallest glasses against the rack heights the maker lists before you buy.
Noise level and cycle time
Noise levels in this list run from 44 dBA to 52 dBA, and that spread matters in an open-plan home. A 44 dBA machine fades into background sound, while a 52 dBA machine is easy to hear from the next room. Cycle time matters too, since heated drying adds minutes to the end of a cycle.
The Frigidaire 30-minute Quick Clean and the GE 1-hour wash shorten the wash part, but the drying phase still adds time. A delay start of 1 to 24 hours lets you run the machine overnight or while you are out, which removes noise from the evening entirely.
Energy use and rinse aid
Heated drying uses more energy than air drying or condensation drying, because the element draws power to warm the air. Annual energy figures in this list run from 240 kWh to 270 kWh, which gives a fair comparison between models of similar size. Rinse aid helps every drying method by letting water sheet off dishes instead of beading.
The maker lists a rinse aid dispenser on each full-size model here. Keep the dispenser filled and use the heated dry option together with rinse aid for the driest results, and switch to the no-heat or Energy Saver setting when you want to save energy on loads of glass and ceramic.
FAQ
These answers cover the questions buyers ask most about heated drying: energy use, plastics, wet dishes, turning the feature off, and rinse aid. Each answer uses only the drying systems and specifications stated on the pages that opened during research.
Do dishwashers with heated drying use more energy
Yes, heated drying uses more energy than drying without heat, because the heating element draws power to warm the air inside the tub after the final rinse. Annual energy figures for the models here run from 240 kWh to 270 kWh, and the GE model lists a Calrod heater rated at 800 watts on high.
The extra cost is modest for most households, and you can cut it by using the heated dry option only on loads with plastics, or by choosing the Energy Saver setting on models that offer a no-heat dry cycle. Rinse aid also helps, since it lets water sheet off dishes and shortens the drying work the element must do.
Can plastic dishes be dried with heat
Heated drying is made for plastics in the models listed here, and the makers state it directly. The GE Dry Boost system is described as getting hard-to-dry items such as plastics drier than standard heated dry, and the Sharp maker states that its heated dry option is effective on plastics.
Heat can warp thin disposable plastics, so check the item for a mark for dishwasher use and place plastics on the upper rack, away from the heating element. The Whirlpool model uses a recessed heating element, which keeps the heat source below the lower rack and away from items loaded above it.
Why are some dishes still wet after the dry cycle
Wet dishes after heated drying usually come from loading, not from the drying system. Nested bowls, cups tipped at an angle and tall items that shade the items below them all trap water where warm air cannot reach. Plastics cool fast and hold droplets even with a heating element, which is why the fan-assisted systems dry them better.
Rinse aid helps by letting water sheet off instead of beading. Load items with space between them, angle cups and bowls so water drains, and run the Extended ProDry option on the KitchenAid when a load holds many plastics.
Can I turn the heat dry option off
Yes, heated drying is an option on every model in this list, not a fixed cycle stage. The GE model lists Dry Boost settings of normal, high and off, so you can switch it off entirely. The Sharp model lists Heated Dry as one of 4 options, and the Frigidaire model offers an Energy Saver option that dries without using heat.
Turning heated drying off saves energy and suits loads of glass and ceramic that dry well by condensation, while turning it on suits loads with plastics, bottles and deep containers.
Does the dry cycle replace rinse aid
No, heated drying and rinse aid do different jobs, and they work best together. Rinse aid lowers the surface tension of water so it sheets off dishes instead of forming droplets, which helps every drying method, including heated drying. Without rinse aid, droplets stay on dishes and the element must work longer to dry them.
Heated drying then warms the air to evaporate the thin film that remains. Every full-size model in this list has a rinse aid dispenser, and the makers list it as part of the drying setup. Keep the dispenser filled and use both features together for the driest loads, especially on plastics and glassware.
Conclusion
Heated drying turns a dishwasher from a washer into a finisher, and the six models here cover that job at several sizes and noise levels. Pick the KitchenAid for the strongest fan-assisted drying, the GE for plastics and bottles, or the Midea when space is tight, and set the heated dry option on every load that holds plastics.
Write Your Review
No reviews yet. Be the first to share your experience!