Key takeaways
- Six 2 mic mixers for podcasting with exactly two mic preamps each, compared on USB recording, phantom power, effects, monitoring and size for two-voice shows.
Two-person podcasts do not need a big desk; they need two good microphone channels and nothing in the way. Every mixer in this guide has exactly two mic preamps, verified on its product page, and the six 2 mic mixers for podcasting differ in how the show gets recorded: multitrack USB, stereo USB, streaming loopback, or analog into a recorder.
Quick verdict
Five of the six connect to a computer over USB. Their recording shapes differ: the ProFX6v3 returns two mixes from the computer, the ZEDi-8 can record its two mic channels as separate tracks, the Notepad-8FX adds a ducking feature for voice-over work, and the AG06MK2 is built around streaming with loopback and mix-minus.
The Xenyx 802S is the simple stereo option with a 16-bit/48 kHz USB path. The Yamaha MG06X is the odd one out in a useful way: no USB at all, just two D-PRE preamps and balanced outputs to feed a recorder or interface you already own. If your show is recorded as one stereo file and edited lightly, any of the six works; if each voice needs its own track, the ZEDi-8’s channel recording mode is the standout.
| Product | Recording path | Mic preamps | Best for | Main limit |
|---|---|---|---|---|
| Mackie ProFX6v3 | USB 2×4, 192 kHz | 2 Onyx | Two hosts plus computer audio | Records the stereo mix |
| Soundcraft Notepad-8FX | USB interface | 2 combo | Voice-over and narration shows | USB track count unstated |
| Allen & Heath ZEDi-8 | USB 2×2, 96 kHz | 2 GSPre | Separate tracks per voice | 2-band EQ only |
| Behringer Xenyx 802S | USB 2×2, 16-bit/48 kHz | 2 XENYX | Simple two-mic streaming | 16-bit USB ceiling |
| Yamaha MG06X | Analog out only | 2 D-PRE | Feeding an existing recorder | No USB connection |
| Yamaha AG06MK2 | USB 2×2, 192 kHz, loopback | 2 combo | Live streamed podcasts | Streaming-first layout |
How we selected
The entry rule was mechanical: the opened product page had to show exactly two microphone inputs or preamps. Mixers with three or four mic channels were excluded even when they are popular with podcasters, because the keyword asks for a 2 mic desk and a third preamp is size, weight and cost a two-voice show never uses.
Beyond the count, we looked for podcast-working features: phantom power for condenser microphones, a high-pass or low-cut filter for room rumble, headphone monitoring that does not run through the computer, and a way to bring in music or a remote guest on the remaining line channels. Every figure below comes from a page opened for that model during this batch’s research.
Two shapes dominate the category and both are represented. The first is the small analog desk with a USB port added, where the mixer is the product and the recording path is a stereo feed. The second is the streaming desk, where the USB connection carries functions like loopback and mix-minus that exist only because a computer is attached. A two-person show that records offline lives happily with the first shape; a show that broadcasts live usually wants the second.
2 mic mixers for podcasting in detail
Each review covers the two mic channels first, then the recording path, the guest and playback channels, and the monitoring setup. In a two-voice show those four things decide the working day; everything else on the panel is secondary. Two of the six also handle guests and callers in specific ways worth noting.
Mackie ProFX6v3
The ProFX6v3 builds its two mic channels properly: Onyx preamps with up to 60 dB of gain, phantom power, a 100 Hz low-cut filter for rumble, and a 2-band EQ. Its 2×4 USB interface records the mix at up to 24-bit/192 kHz and can bring two separate mixes back from the computer.
Those dual returns are the podcast feature: one feed can carry music or a caller’s audio while the other carries the show’s own playback, each at its own level. Channels 3 and 4 take line sources, channel 5/6 is a 3.5 mm stereo input that can switch to a USB return, and the GigFX engine offers 24 effects if a voice needs reverb for a segment. Headphone monitoring has its own level and blend control for latency-free overdubbing of intros and ads. The steel desk measures 2.8 x 7.5 x 8.4 inches and weighs 2.6 lb, and Pro Tools | First and Waveform software are included.
The USB recording is the stereo mix, so the two voices are committed together; a co-host who runs hot cannot be pulled down separately in editing.
- Pros: Two USB return mixes, 192 kHz recording, low-cut filters, tiny steel body
- Cons: Stereo recording only, 2-band EQ, no per-voice tracks
Buy if you record or stream the finished mix and want flexible computer audio routing. Skip if you edit each voice separately.
Soundcraft Notepad-8FX
The Notepad-8FX pairs two combo mic/line inputs, one with a Hi-Z option, with a feature podcasters ask for by name: ducking, which lowers background audio under speech. Its USB interface connects to Mac without a driver and to PC with one. Phantom power covers condenser microphones on both channels.
The remaining channels take four line inputs across two stereo pairs plus an RCA stereo input for a phone or player, so music beds and guest devices have homes without touching the mic channels. A 3-band EQ shapes each voice, Lexicon delay, chorus and reverb cover vocal polish, and an aux send feeds an external processor or a monitor. Main outputs are balanced XLR, there is a single master fader, and the metal enclosure measures 3.5 x 10.7 x 11.9 inches at 3.0 lb with an 18V supply included.
The opened listing does not state the USB channel count, so this guide claims none; treat it as a stereo-class connection and confirm the routing if separate tracks matter to you.
- Pros: Ducking for voice-over work, 3-band EQ, Lexicon effects, XLR mains
- Cons: USB track count unstated, one master fader, external supply
Buy if your show mixes voices over music beds or narration over footage. Skip if guaranteed multitrack recording is the requirement.
Allen & Heath ZEDi-8
The ZEDi-8 is the editing-friendly pick: its 2-in/2-out USB interface can be routed to record the stereo mix or the two mono input channels individually, so each host lands on a separate track at up to 24-bit/96 kHz. For two-voice editing, that routing option is the whole argument.
The two GSPre preamps come from the maker’s GS-R24 console design and pair with separate line sockets, switchable Hi-Z inputs and a 100 Hz high-pass filter. Phantom power is global, the EQ is 2-band on every channel, and two stereo line inputs handle playback gear. Balanced XLR mains, a headphone output with PFL, and 8-segment stereo metering cover the output side. An internal power supply keeps the desk tidy, and the unit measures 249 x 236.4 x 88.9 mm at 1.3 kg.
The 2-band EQ is basic, so problem voices get limited correction at the desk, and there are no built-in effects for live vocal polish.
One practical note on the routing: because the interface is 2-in/2-out, the channel mode and the mix mode are alternatives chosen per session, not simultaneous paths. Record the interview in channel mode for editing, then switch to mix mode for a live-streamed episode, and the desk covers both halves of a typical podcast workflow without extra hardware.
- Pros: Per-channel USB recording mode, console-derived preamps, internal supply
- Cons: 2-band EQ, no effects section, global phantom switching
Buy if you edit the two voices separately and want the desk to hand you separate tracks. Skip if you want effects and deeper EQ while recording.
Behringer Xenyx 802S
The 802S is the straightforward option: two XENYX mic preamps with phantom power, a USB streaming interface that moves a stereo feed each way at 16-bit/48 kHz, and a layout a new podcaster can learn in one sitting. It is the current successor to the older Q802USB generation of the same format.
Each channel carries a 3-band EQ, the two mono channels are joined by three stereo line channels for music and guests, and every channel has an FX send for an external processor. Main outputs are balanced quarter-inch, the headphone output is a stereo quarter-inch, and the desk runs on an 18V adapter at 12 W and about 1.6 kg. For a show recorded as a stereo file, the 48 kHz USB rate matches podcast delivery formats directly, and the two mic channels leave the stereo inputs free for a theme tune and a remote feed.
The 16-bit USB ceiling is below the 24-bit standard of the rest of this group, and there are no built-in effects, no low-cut filter is listed on the opened page, and dimensions were not published there either.
- Pros: Simple layout, 3-band EQ, stereo channels to spare, light
- Cons: 16-bit USB, no onboard effects, external adapter
Buy if you want the least complicated two-mic desk that still streams over USB. Skip if you record at 24-bit or need separate voice tracks.
Yamaha MG06X
The MG06X is the analog exception, included because its two Class-A D-PRE preamps are the strongest analog front end here and many podcast rigs already own a recorder or interface. Its page states the arrangement plainly: no USB, so it feeds a separate recording device from its balanced XLR outputs.
Each mic channel adds a 26 dB pad and a high-pass filter, the EQ is 2-band, and the SPX processor offers 6 programs of reverb and delay for a finished sound at the desk. Two stereo line inputs take playback sources, phantom power covers condensers, and the metal chassis measures 149 x 62 x 202 mm at about 0.9 kg, the smallest footprint in this group. As a front end it also doubles for small live work, which none of the streaming desks here attempt.
Without USB it cannot record by itself, and there is no headphone blend or computer return path; the recorder behind it has to provide those.
- Pros: D-PRE preamps, pads and filters, smallest and lightest here, XLR outputs
- Cons: No USB at all, needs a separate recorder or interface, 2-band EQ
Buy if you already own a recorder or interface and want a better two-mic front end. Skip if the mixer itself must connect to the computer.
Yamaha AG06MK2
The AG06MK2 is the live-streamed podcast desk: two combo mic inputs with phantom power, a USB connection at up to 24-bit/192 kHz, and a loopback function that folds computer audio into the stream, with output modes for dry channels, the input mix, or the full loopback feed.
A mix-minus function handles phone guests without echo, the TRRS connection brings a smartphone in directly, and a mute button serves live moments. Onboard DSP adds compression, EQ, SPX reverb and an amp simulator through 1-TOUCH controls, with the AG Controller app for detail, and channel 2 doubles as a guitar input. Two stereo line inputs cover music sources. Cubase AI and WaveLab Cast are bundled, the unit runs on USB bus power, and it measures 152 x 63 x 201 mm at 0.9 kg.
The layout is streaming-first, so controls a recording podcaster wants, like per-channel EQ knobs, live partly in the app, and the USB path is stereo.
- Pros: Loopback and mix-minus for live shows, 192 kHz USB, bus powered, DSP voices
- Cons: Stereo recording, app-based detail control, only 2 stereo line inputs
Buy if your podcast is streamed live with callers and computer audio in the mix. Skip if you record offline and edit heavily.
Buying guide
A two-mic podcast desk is a small purchase with a long life, and the differences that matter are workflow differences: how the voices are captured, how a guest joins, and how the hosts hear themselves. The sections below follow a recording session in order.
One stereo file or two separate tracks
Recording the finished stereo mix is the simplest workflow and the one most of these desks assume. Levels are set while talking, the file needs little editing, and publishing is fast. The cost is commitment: crosstalk between the two microphones and any level mistake are baked into both voices at once.
Separate tracks forgive mistakes. The ZEDi-8’s channel recording mode hands the editor one file per voice, so a cough can be muted and a quiet host raised without touching the other track. If your show is edited by someone else, or recorded in a noisy room where cleanup matters, that mode earns its place quickly.
What matters most in 2 mic mixers for podcasting
Headphone monitoring comes first. Both hosts need to hear themselves and each other without delay, which means monitoring from the desk, not from the recording software. Every desk here offers a headphone output fed by the mixer itself; the ProFX6v3 adds a blend control for balancing the computer’s playback against the live voices.
Second is rumble control: a low-cut or high-pass filter on the mic channels (ProFX6v3, ZEDi-8, MG06X) strips desk bumps and room noise before they reach the recording. Third is phantom power, present on all six, which decides whether condenser microphones are an option. Effects, by contrast, matter least; a dry voice edits better than a reverberant one.
Guests, callers and playback
A two-mic desk still needs spare inputs. Music beds, a producer’s playback and a remote guest all arrive on line channels: the ProFX6v3 and Notepad-8FX offer the most line inputs here, and the AG06MK2 adds a TRRS phone connection with mix-minus so a caller does not hear their own voice back.
For in-person guests, remember the rule of this guide: a third microphone has nowhere to plug in. Shows that regularly host a third voice should buy a four-mic desk instead; these six are deliberately sized for two.
Music deserves one line of its own: a stereo line channel spent on a music bed cannot also carry the caller’s return, so shows that use both at once should count line channels the way they count microphones. The ProFX6v3, with two stereo line pairs plus a switchable mini-jack channel, has the most playback room in this group.
Condenser or dynamic microphones
All six desks power condenser microphones, and all six have gain to spare for typical dynamic podcast microphones: the ProFX6v3 reaches 60 dB, the MG06X adds a 26 dB pad for loud sources, and the preamp families here (Onyx, GSPre, D-PRE, XENYX, XMAX-class designs) are the same circuits these makers sell for music recording.
Very quiet dynamic microphones paired with soft voices are the edge case; if your levels sit near the top of the gain range in tests, an inline booster is the standard fix and works with any desk in this group.
Placement matters more than the choice between the two microphone types. Two hosts in one room bleed into each other’s microphones, and the fixes are physical: closer placement, lower gain, and a treated corner of the room. Every desk here gives you the gain range and the filtering to support that approach; none can substitute for it. A show recorded close and quiet on the simplest desk in this group will sound better than a distant, loud recording on the most capable one.
FAQ
Four questions cover the usual two-mic buying decisions: whether two preamps are really enough, whether a mixer beats a plain interface for podcasting, how callers join the show, and what to do when a third voice appears. Each answer is kept short and practical.
Are 2 mic mixers for podcasting enough for a growing show?
For a fixed two-host format, yes, and the constraint is a benefit: levels, EQ and routing stay simple, and the desk stays small. Growth that adds production, music, callers and clips is absorbed by the line channels, which all six desks provide beyond the two mic inputs.
Growth that adds voices is the limit. A recurring third host or regular in-person guests need microphone inputs, and no adapter creates one. Buy for the format you record weekly, not the episode you might record once.
Mixer or audio interface for a two-person podcast?
A mixer gives physical control during the show: mutes for coughs, levels ridden by hand, headphones fed without software delay, and playback sources mixed live. An interface gives a cleaner path to multitrack recording and takes less desk space, but everything happens on screen.
The ZEDi-8 narrows the gap with its per-channel USB mode. The AG06MK2 answers differently, folding streaming functions into the desk. Choose by where you want your hands during recording: on faders and knobs, or on a mouse.
Cost of ownership tilts toward the mixer for live shows: one box handles microphones, monitoring, callers and playback, where an interface-based rig assembles the same functions from software and discipline. For a purely recorded show with heavy editing, the balance reverses, and several podcasters end up owning both shapes at different stages of a show’s life.
How does a phone guest join a two-mic setup?
Two routes appear in this group. The AG06MK2 has a TRRS smartphone connection and a mix-minus function, which sends the caller everything except their own voice, preventing echo. The other desks take a phone or computer on a line channel, and the host manages the return feed manually.
Mix-minus is the feature to look for if callers are regular. Without it, the caller hears a delayed copy of themselves, which disrupts conversation; with it, the call sounds like a normal phone conversation on both ends.
Can I add a third microphone later?
Not to these desks. The mic count is fixed by the preamps, and line inputs cannot substitute because they lack the gain and the XLR input a microphone needs. A small second mixer submixed into a line channel is a workaround some shows use, with its own noise and level-matching costs.
If a third voice is likely within the desk’s lifetime, the honest answer is to buy a four-mic mixer now. This guide’s six are for shows certain about their two-voice format.
Conclusion
For edited two-voice shows, the ZEDi-8’s per-channel recording is the strongest fit. The ProFX6v3 suits finished-mix recording with flexible returns, the AG06MK2 owns live streaming, the Notepad-8FX adds ducking, the 802S keeps things simple, and the MG06X fronts an existing recorder. Two voices, six honest ways to capture them.