Updated Nov 17, 2026· 15 min read

Key takeaways

  • Find the best water coolers for Ryzen 1700X with AM4 fit, radiator size, fan airflow, pump speed and noise notes for six liquid coolers that suit this chip.

The Ryzen 7 1700X still runs warm under long loads, and a weak cooler can hold back a solid AM4 build. A best water coolers for Ryzen 1700X shortlist should start with AM4 mounting, radiator fit, fan airflow and pump design, not looks alone. This guide compares six liquid coolers with published specs that match that socket.

Quick verdict

The short answer is to match radiator size to your case first, then pick fan and pump traits that fit your noise aim. A 280 mm or 360 mm unit suits a roomy tower, while a 240 mm unit suits a smaller case with less front or top space. The table below gives a fast view of each pick.

Product Type Best for Key spec Main limit
ARCTIC Liquid Freezer III Pro 280 A-RGB 280 mm AIO Thick radiator and VRM fan Radiator 317 x 138 x 38 mm Needs 63 mm clearance
Cooler Master MasterLiquid 360L Core ARGB 360 mm AIO Large case and ARGB fans Fans 650-1750 RPM Needs a 360 mm mount
DeepCool LS720 SE 360 mm AIO High airflow fans Fans 500-2250 RPM Needs a 360 mm mount
Fractal Design Lumen S36 v2 RGB 360 mm AIO Simple pump and slim radiator Pump 4000 RPM Fixed pump speed
NZXT Kraken RGB 240mm 240 mm AIO Compact case and LCD display Display 1.54 in Smaller radiator area
Lian Li Galahad II Trinity 360 360 mm AIO High speed fans and pump caps Fans up to 2450 RPM Needs a 360 mm mount

How we selected

Selection drew on published maker and listing page spec pages for AM4 compatible AIO coolers that are still listed for sale. Each pick had to list AM4 in its socket support, state radiator size, fan speed and airflow, and give pump details. No hands-on claim is made here.

The Ryzen 7 1700X uses the AM4 socket, so socket support was the first filter. Radiator size was the second filter, because case fit decides most AIO choices. Fan and pump specs were the third filter, because they shape airflow, pressure and noise.

Spec pages were read for radiator size, fan speed and airflow, pump speed, tube length and socket lists. Where a page did not state a fact, the article says so or leaves that fact out.

Best water coolers for Ryzen 1700X

This section covers six AIO coolers that list AM4 support and give clear radiator, fan and pump specs. Each entry explains who the cooler suits, why it fits a 1700X build, what the maker lists, and where it falls short. Read the fit notes first, then the specs.

ARCTIC Liquid Freezer III Pro 280 A-RGB for Ryzen 1700X

This 280 mm AIO suits a builder who wants a thick radiator, two large fans and a small fan aimed at the board area. It fits a 1700X build because the maker lists AMD AM4 in its socket list, and its 280 mm size fits many mid tower cases with a 280 mm mount.

The maker lists a radiator of 317 x 138 x 38 mm in aluminum, with two P14 Pro A-RGB fans. The maker lists fan speed of 400-2500 rpm, airflow of 110 cfm, and static pressure of 5.2 mmH2O. The maker lists a pump speed of 800-2800 rpm with PWM control, and a VRM fan speed of 400-2500 rpm with PWM control. Tube length is 450 mm, with an outer diameter of 12.4 mm and an inner diameter of 6.0 mm. Weight is 1897 g. The maker lists compatibility with Intel LGA1851 and LGA1700, and AMD AM5 and AM4. The maker lists a warranty of 6 Years, and an operating ambient temperature of 0 to 40 C. The maker lists MX-6 thermal paste at 0.8 g.

Limits: the maker notes that the Liquid Freezer requires at least 63 mm of clearance for installation, and that some motherboards may be incompatible due to oversized SSD coolers in the M.2_1 slot. Check board layout and case depth first.

  • Pro: thick 38 mm radiator with two large fans for broad airflow
  • Pro: VRM fan and offset mounting described by the maker for board and chip contact
  • Pro: long 450 mm tubes give routing room in a mid tower case
  • Con: needs at least 63 mm of clearance, which some cases lack
  • Con: large pump head can clash with a tall M.2 cooler on some boards

Buy if you have a 280 mm mount, room for a deep radiator, and you want two large fans with a VRM fan. Skip if your case is shallow, your board has a tall M.2 cooler in the first slot, or you want a 360 mm radiator instead.

Cooler Master MasterLiquid 360L Core ARGB

This 360 mm AIO suits a builder with a large case who wants three ARGB fans and a simple dual chamber pump. It fits a 1700X build because the maker lists AMD AM4 in its socket list, with a broad list that also covers AM5 and older AMD sockets, for a large tower build.

The maker lists a radiator of 394 x 119.6 x 27.2 mm in aluminum, with three fans of 120 x 120 x 25 mm. The maker lists fan speed of 650-1750 RPM, fan airflow of 71.93 CFM, fan noise level of 27.2 dBA, and fan pressure of 1.86 mmH2O. The maker lists a pump with a Gen S dual chamber design, pump dimensions of 81 x 76 x 47 mm, pump noise level of 12 dBA, pump power consumption of 3.96W, and pump MTTF of more than 70,000 Hours. Fan MTTF is more than 160,000 Hours. The maker lists a warranty of 3 years. Product number is MLW-D36M-A18PZ-R1.

Limits: a 360 mm radiator is long, so a small case may not take it at the front or top. Fan speed tops out at 1750 RPM, which is lower than some rival 360 mm units here.

  • Pro: slim 27.2 mm radiator helps fit in a large case with tall parts
  • Pro: three ARGB fans with a clear speed, airflow and noise list
  • Pro: dual chamber pump with a low listed pump noise level
  • Con: needs a full 360 mm mount, which small cases lack
  • Con: fan top speed is lower than some rival 360 mm fan sets

Buy if your case takes a 360 mm radiator, you like ARGB fans, and you want a slim radiator. Skip if your case takes only a 240 mm or 280 mm radiator, or you want the highest fan speed in this roundup.

DeepCool LS720 SE

This 360 mm AIO suits a builder who wants high airflow fans and a fast pump in a 360 mm size. It fits a 1700X build because the maker lists AMD AM5 and AM4 in its socket list, with Intel LGA1700, LGA1200 and LGA1151 also listed for this size here today.

The maker lists a radiator of 402 x 120 x 27 mm in aluminum, with tube length of 410 mm. The maker lists a pump speed of 3100 RPM, pump noise of 19 dB(A), pump power consumption of 4.56 W, and pump dimensions of 85 x 73 x 55 mm. The maker lists fans of 120 x 120 x 25 mm, fan speed of 500-2250 RPM, fan airflow of 85.85 CFM, fan air pressure of 3.27 mmAq, and fan noise of 32.9 dB(A) or less. With the low speed adapter, the maker lists fan speed of 500-1600 RPM, fan airflow of 60.85 CFM, fan air pressure of 1.65 mmAq, and fan noise of 28.2 dB(A) or less. Net weight is 1659 g. The maker describes a 4th generation water pump with optimized microchannels, a three phase drive motor, and a thick copper cold plate.

Limits: the radiator is 402 mm long, so measure the case mount with care. Fan noise at full load is listed at 32.9 dB(A) or less, which is higher than the Cooler Master fan noise list here.

  • Pro: high airflow fans at 85.85 CFM with strong static pressure
  • Pro: fast 3100 RPM pump with a copper cold plate
  • Pro: low speed adapter gives a quieter fan mode for light use
  • Con: long 402 mm radiator needs careful case measurement
  • Con: full load fan noise list is higher than some rivals here

Buy if you have a 360 mm mount, you want high airflow, and you like the low speed adapter option. Skip if your case mount is tight at the ends, or you want the lowest listed fan noise in this roundup.

Fractal Design Lumen S36 v2 RGB

This 360 mm AIO suits a builder who wants a slim radiator, a simple fixed speed pump, and ARGB lighting on the pump head. It fits a 1700X build because the maker lists AMD AM5 and AM4 in its socket list, with a wide list of older AMD sockets also listed.

The maker lists a radiator of 392 x 120 x 27 mm in aluminum, with tube length of 400 mm. The maker lists three Aspect 12 PWM fans, fan speed of 500-2000 RPM, fan airflow of 13-56 CFM, fan static pressure of 0.23-2.34 mm H2O, and fan noise of less than 10 to 33.2 dBA. Fan MTTF is 90000 h. The maker lists a ceramic pump with a speed of 4000 RPM, pump noise of 22 dBA, max pressure of 17.6 kPa and 2.5 PSI, pump MTTF of 50000 h, and pump input current of 0.34 A. The maker lists a copper cold plate, pre-applied thermal paste, and a warranty period of 5 years. Net weight is 1.0 kg. SKU is FD-W-L1-S3612.

Limits: the pump runs at a fixed 4000 RPM, so it does not slow down at idle in the way a PWM pump can. Fan airflow tops out at 56 CFM, which is lower than the DeepCool and Lian Li fans here.

  • Pro: slim 27 mm radiator with a copper cold plate and pre-applied paste
  • Pro: simple fixed speed ceramic pump with a clear spec list
  • Pro: six addressable LEDs on the pump head for board lighting control
  • Con: fixed pump speed gives less tuning room than a PWM pump
  • Con: fan airflow tops out at 56 CFM, lower than some rivals here

Buy if you want a slim 360 mm radiator, a simple pump, and ARGB on the pump head. Skip if you want a PWM pump you can tune by load, or you want the highest fan airflow in this roundup.

NZXT Kraken RGB 240mm

This 240 mm AIO suits a builder with a compact case who still wants a display on the pump head. It fits a 1700X build because the listing page spec list includes AMD AM5 and AM4, with Intel LGA 1700 and LGA 1200 and 115X also listed, and AMD Ryzen 7 in the CPU list.

The listing page lists a radiator of 123 x 275 x 30 mm in aluminum, with tube length of 400 mm. The listing page lists a pump motor speed of 800-2800 RPM, at 12V DC and 0.3A. The listing page lists two F120RGB Core fans of 120 x 120 x 26 mm, fan speed of 500-1800 RPM, fan airflow of 78.86 CFM, fan air pressure of 2.57 mm H2O, and fan noise of 33.88 dBA. Fan bearing is fluid dynamic bearing, and fan life is 60,000 hours. The display is 1.54 in in diameter, with a size of 39.1 mm, resolution of 240 x 240 px, and brightness of 300 cd/m2. The waterblock is 74.7 mm x 55.97 mm, with a copper block. The listing page notes a 6-year NZXT warranty.

Limits: a 240 mm radiator has less surface than a 280 mm or 360 mm radiator, so it has less room under long loads. Fan noise is listed at 33.88 dBA, and the pump head is tall at 55.97 mm.

  • Pro: compact 240 mm size fits smaller cases with a 240 mm mount
  • Pro: 1.54 in display shows system info or custom images
  • Pro: two RGB fans with strong airflow for a 240 mm unit
  • Con: smaller radiator area than 280 mm and 360 mm picks here
  • Con: listed fan noise is higher than some rivals in this roundup

Buy if your case takes only a 240 mm radiator, you want a pump display, and you like RGB fans. Skip if your case takes a 280 mm or 360 mm radiator and you want more radiator surface for long loads.

Lian Li Galahad II Trinity 360

This 360 mm AIO suits a builder who wants fast fans, a high speed pump, and three pump cap looks. It fits a 1700X build because the listing page spec list includes AM4 and AM5, with LGA1150, LGA1151, LGA1155, LGA1156, LGA1200 and LGA1700 also listed here.

The listing page lists a 360 mm radiator in aluminum, with a thickness of 27 mm and single-wave fins at 20 FPI. Radiator width is 39.8 cm, depth is 11.9 cm, and height is 2.7 cm. The listing page lists three fans of 120 x 120 x 25 mm, fan speed up to 2450 RPM, fan airflow up to 89.1 cfm, fan air pressure up to 3.66 mmH2O, and fan noise up to 35.4 dB. Fan bearing is fluid dynamic bearing. The listing page lists pump motor speed of 3200 RPM and pump noise of 16.59 dB. Pump size is 7.4 cm x 7.4 cm x 6.9 cm. Tube length is 385 mm, with an inner diameter of 7 mm at the tubing connector. Product code is GA2T36B.

Limits: fan noise up to 35.4 dB is the highest list in this roundup, so a fan curve matters. Tube length is 385 mm, which is shorter than the 400 mm and 450 mm tubes on other picks here.

  • Pro: fastest fans here at up to 2450 RPM and 89.1 cfm airflow
  • Pro: three pump cap looks with L-Connect 3 control described by the maker
  • Pro: 45-degree tubing connector helps with routing and mounting
  • Con: listed fan noise up to 35.4 dB is the highest in this roundup
  • Con: 385 mm tubes are shorter than tubes on other picks here

Buy if you have a 360 mm mount, you want fast fans, and you like the pump cap options. Skip if you want low listed fan noise, or your large tower needs longer tubes for a clean route.

Buying guide for best water coolers for Ryzen 1700X

This buying guide covers the fit and setup points that matter most for a 1700X AIO. Work through size, mounting, fans, pump and cables in order, and measure your case before you pick a radiator. A good fit beats a good spec sheet. Measure twice, then order.

Radiator size and case fit

Radiator size decides whether an AIO fits at all, so measure the front and top mounts in your case before you buy. A 360 mm radiator needs a long mount with room at both ends, a 280 mm radiator needs a wide mount, and a 240 mm radiator needs the least room of the three.

Check the case manual for radiator support at the front, top and side, and note the depth allowed for radiator plus fans. A thick radiator plus fans can press against tall memory or a board heatsink.

AM4 mounting and cold plate contact

AM4 mounting uses the board backplate and brackets that ship with the cooler, and the cold plate must sit flat on the chip. Use the AMD brackets from the box, follow the manual for your socket, and tighten screws in a cross pattern in small steps so pressure stays even across the plate.

Clean the chip and the cold plate before fitting, and use the thermal paste that ships with the cooler. Some coolers ship with paste pre-applied, such as the Fractal pick here, while others ship with a tube.

Fan airflow, pressure and noise

Fan airflow, static pressure and noise work together, and a high airflow number alone does not tell the full story. Airflow in CFM shows how much air a fan moves in open air, while static pressure in mmH2O shows how well it pushes air through a dense radiator.

Noise in dBA rises with fan speed, so a fan that tops out at a high RPM can be loud at full speed. Set a fan curve so fans run slow at idle and rise only under load.

Pump speed and tube routing

Pump speed shapes coolant flow, and tube routing shapes how the pump head sits in the case. A PWM pump can change speed with load, while a fixed speed pump runs at one speed at all times. The Fractal pick uses a fixed 4000 RPM pump, while the ARCTIC, Cooler Master and DeepCool picks list PWM or variable pump control in their spec pages.

Route tubes so they do not kink, press against a fan, or pull on the pump head. Long tubes give more routing room, and the ARCTIC pick lists 450 mm tubes, while the Lian Li pick lists 385 mm tubes.

Lighting, software and cable layout

Lighting and software add control and looks, but they also add cables and headers. ARGB fans and pump heads need a 5V ARGB header or a controller, while a display pump needs a USB header and software. Count the headers on your board before you buy a cooler with a display or ARGB.

The NZXT pick uses CAM software for its display, fan speed and pump speed, while the Lian Li pick uses L-Connect 3 for pump looks, fan speed and lighting. If you do not want extra software, pick a cooler with simple ARGB that runs from the board.

FAQ

These answers cover the common questions that come up when picking an AIO for a 1700X. They use the specs in this roundup and general AIO setup notes, with no hands-on claim. If a spec is not listed, the answer says so. Read the fit notes first, then check specs.

Do best water coolers for Ryzen 1700X need a 360 mm radiator?

No, a 360 mm radiator is not a must for a 1700X, and a 240 mm or 280 mm AIO can fit many builds. A 360 mm radiator gives more surface and more fan area, which helps under long loads, but it needs a case with a 360 mm mount. A 280 mm unit can suit a mid tower well.

Pick size by case fit first. If your case takes a 360 mm radiator, that size gives the most room here. If it takes only a 240 mm radiator, the NZXT pick fits that size.

Can a 240 mm cooler handle a Ryzen 7 processor?

A 240 mm AIO can handle a 1700X in a case with good airflow, a clear fan curve, and a clean radiator. The NZXT Kraken RGB 240mm in this roundup lists two fans at 78.86 CFM and a pump at 800-2800 RPM, which shows that a 240 mm unit can move a lot of air for its size.

Keep the radiator free of dust, set fans to rise with load, and make sure intake air is not blocked. A 240 mm unit has less headroom under a long, heavy load than a 360 mm unit.

What should I do before fitting an AIO on AM4?

Before fitting, read the case manual for radiator support, read the cooler manual for AM4 brackets, and lay out all screws, brackets and cables on a clean surface. Check that the AMD brackets, backplate and thermal paste are in the box, and check the board layout for tall parts near the socket.

Remove the old cooler, clean the chip, and fit the backplate with the right orientation for AM4. Mount the radiator first, then fit the pump head and connect pump, fan and lighting cables.

How often should I clean an AIO radiator and fans?

Clean the radiator and fans when dust builds up on the fins or fan blades, which can be every few months in a dusty room or less often in a clean room. Dust blocks airflow through the radiator and can raise fan noise as fans work harder to move air through a clogged fin stack.

Turn the PC off, unplug it, and use a soft brush or compressed air to clear dust from the radiator fins and fan blades. Do not open the loop, and do not add coolant.

Why is my AIO louder after a move or a rebuild?

An AIO can get louder after a move if a fan cable touches a blade, a radiator screw is loose, a tube presses against a fan, or air has moved into the pump head. A loose mount can also let the pump head vibrate against the board or a nearby part, which adds noise.

Check each fan for a cable or tube touching a blade, tighten radiator screws, and make sure the pump head sits flat on the chip. If noise stays, set a gentler fan curve.

Conclusion

Pick the radiator that fits your case, then match fan airflow, pump speed and noise to your daily use. The ARCTIC 280 mm pick suits a deep mount, the 360 mm picks suit large towers, and the NZXT 240 mm pick suits a compact case with a display. Check case fit and tube length first, before you order now.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.