Updated Nov 17, 2026· 15 min read

Key takeaways

  • Five gas downdraft cooktops compared on burner output, vent CFM, LP conversion kits and duct-free options, with griddle facts stated plainly from maker pages.

A downdraft cooktop pulls smoke and steam down instead of up, which suits islands and open plans. Shoppers comparing gas cooktops with downdraft and griddle and conversions need three facts straight: no maker here includes a griddle in the box, every model lists an LP conversion path, and vent ratings differ more than burner counts suggest.

Quick verdict

Pick the JennAir JGD3536GB for the strongest burner spread in a 36 inch frame, the GE Profile PGP9830DRBB for the highest vent rating at 400 CFM, and either KitchenAid for a 300 CFM downdraft with an LP kit listed. The JennAir JGD3430GS is the 30 inch pick with its LP kit included in the box.

Read the griddle point before anything else. Both JennAir spec sheets state griddle included: N/A, and the KitchenAid and GE pages list no griddle among the included parts. What these cooktops offer instead is grate coverage: full-width cast-iron grates on the KitchenAid models and continuous cast iron grates on the JennAir models, so a separate griddle pan can sit across two burners. Conversions are real and documented: LP conversion kits are listed for all five, and KitchenAid and JennAir also list conversion to duct-free venting.

  • Strongest vent rating: GE Profile PGP9830DRBB, at 400 CFM on high speed
  • Widest burner range: JennAir JGD3536GB, five burners from 5,000 to 17,000 BTU
  • LP kit included in the box: both JennAir models and the GE Profile
  • Simplest duct-free path: KitchenAid pair, listed as convertible to duct-free ventilation
  • Only glass surface: GE Profile PGP9830DRBB, a gas-on-glass ceramic cooktop
Product Size Burners Vent rating Conversions listed Main limit
KitchenAid KCGD506GSS 36 inch 5 burners, up to 17K BTU 300 CFM, 3 speeds LP kit listed; duct-free kit separate Maker page prints no dimensions
KitchenAid KCGD500GSS 30 inch 4 burners, up to 17K BTU 300 CFM, 3 speeds LP kit listed; duct-free kit separate Maker page prints no dimensions
JennAir JGD3430GS 30 inch 4 burners, up to 17,000 BTU 297 CFM Motor Class, 3 speeds LP kit included; duct-free kit optional Griddle included: N/A, per maker
JennAir JGD3536GB 36 inch 5 burners, up to 17,000 BTU 297 CFM Motor Class, 3 speeds LP kit included; duct-free kit optional Griddle included: N/A, per maker
GE Profile PGP9830DRBB 30 inch 4 burners, up to 11,500 BTU 400 CFM, 3 speeds LP kit included Lowest burner output in the group

How we selected

We read maker product pages for gas cooktops with built-in downdraft ventilation, and kept only models whose pages document all three parts of this keyword: a downdraft vent, grate coverage that supports griddle cooking, and at least one listed conversion, whether an LP gas kit or a duct-free venting option.

Models with no conversion listed were left out.

Every figure below comes from a maker page or a listing page that publishes the maker’s spec sheet: burner output in BTU, vent ratings in CFM, fan speeds, cutout dimensions where printed, and kit wording quoted as the maker prints it. Where a page stays silent, the entry says so. The KitchenAid pages, for example, print no dimensions, so no cutout figures are given for those two models, and the JennAir pages print two CFM figures, a 297 CFM Motor Class blower description and a 310 figure in the spec table; the blower description figure is the one used here.

Five gas cooktops with downdraft and griddle and conversions

The five cooktops split into two sizes and three vent strengths. KitchenAid builds the same downdraft package in 30 and 36 inch widths, JennAir adds brass burners and an included LP kit, and GE trades burner output for the strongest vent in the group and the only glass surface.

Each entry ends with the limit that should steer some buyers to a different model.

KitchenAid 36 inch 5 Burner Gas Downdraft Cooktop, KCGD506GSS

KitchenAid’s 36 inch downdraft cooktop pairs five burners with a 300 CFM downdraft vent, so no separate hood is needed above it. The maker lists a 17K BTU professional burner, a 15K BTU professional burner, and a 5K BTU Even-Heat simmer burner with a diffuser plate and a melt cap, under full-width cast-iron grates with stainless steel knobs.

The conversions are both documented on the maker page. An LP Conversion Kit is listed, in the maker’s words, to convert the cooktop so it can be used with LP gas, and the vent converts to duct-free ventilation with a kit available separately. The fan runs at 3 speeds, and electronic ignition with automatic re-ignition relights a burner that blows out. The full-width grates are the griddle answer here: a separate griddle pan rests across burners on a continuous iron surface.

The limit is paperwork, not hardware. The maker page prints no dimensions or cutout figures for this model, so a buyer must pull the dimension guide before committing cabinets to it. The duct-free kit is also a separate purchase, and the LP kit is listed without the word included, so confirm what ships in the box before the install date.

  • Pros: five burners with two professional burners; 300 CFM downdraft with 3 speeds; LP kit and duct-free conversion both listed; full-width cast-iron grates
  • Cons: no dimensions on the maker page; duct-free kit sold separately; no griddle included

Buy if you want the wider KitchenAid layout for an island and plan to run a griddle pan across the grates. Skip if your cabinets are already cut and you need printed cutout figures from the product page itself.

KitchenAid 30 inch 4 Burner Gas Downdraft Cooktop, KCGD500GSS

The 30 inch KitchenAid carries the same downdraft package as its wider sibling in a standard cutout width: integrated downdraft ventilation rated at 300 CFM, a 3-speed fan, and four burners topped by a 17K BTU professional burner, a 15K BTU professional burner, and a 5K BTU Even-Heat simmer burner with a melt cap.

Conversion coverage matches the 36 inch model. The maker lists an LP Conversion Kit for LP gas use and lists the vent as convertible to duct-free ventilation with a kit that is not included. Electronic ignition and automatic re-ignition are standard, the knobs are stainless steel, and full-width cast-iron grates give a griddle pan a flat, continuous bed across two burners, which is how griddle cooking works on every model in this roundup.

As with the wider model, the maker page prints no dimensions, so the cutout must come from the maker’s dimension documents rather than the product page. Four burners also crowd faster than five when a griddle pan covers two of them, leaving two burners for the rest of the meal. That trade is the honest cost of the smaller frame.

  • Pros: same 300 CFM downdraft and burner strengths as the 36 inch model; LP kit listed; duct-free conversion listed; full-width cast-iron grates
  • Cons: four burners crowd under a griddle pan; no dimensions on the maker page; duct-free kit not included

Buy if your kitchen takes a 30 inch cooktop and you want KitchenAid’s downdraft and conversion list intact. Skip if you cook with a griddle pan and three pots at the same time.

JennAir JGD3430GS, 30 inch JX3 Gas Downdraft Cooktop

JennAir’s 30 inch JX3 model runs four sealed brass burners: 17,000 BTU at the left front, 5,000 BTU with a melt cap at the left rear, 10,000 BTU at the right front, and 15,000 BTU at the right rear. The JX3 downdraft system uses a vertically mounted blower the maker rates at 297 CFM Motor Class, with 3 speeds.

The burners sit under continuous cast iron grates with a matte finish, and the control knobs sit at the right side.

The conversion list is the strongest paperwork in the group. The spec sheet states LP Convertible: Yes, Kit Included, and lists conversion to duct-free ventilation with an optional kit. Flame-Sensing re-ignition watches the burners, the sheet lists the cooktop as power outage compatible, and DuraFinish Protection covers the surface. Cutout figures are printed: 28.625 inches wide and 19.938 inches deep, in a body 30.0 inches wide, 21.5 inches deep, and 4.0 inches high.

The griddle line is equally plain: the sheet states Griddle Included: N/A, so griddle cooking means your own pan across the continuous grates, which the maker lists as dishwasher cleanable. The vent rating also trails the GE model below by a wide margin. Buyers who sear hard every night should weigh that gap.

  • Pros: LP kit included; brass burners with removable bases; printed cutout dimensions; power outage compatible per the spec sheet; ADA compliant and UL listed per the sheet
  • Cons: griddle included: N/A; vent rating below the GE model; duct-free kit optional rather than included

Buy if an LP kit in the box and printed cutout figures matter more than raw vent strength. Skip if a bundled griddle was the point of your search; no model here includes one.

JennAir JGD3536GB, 36 inch JX3 Gas Downdraft Cooktop

The 36 inch JennAir spreads five sealed brass burners across a black glass surface: 17,000 BTU at the right rear, 15,000 BTU at the center front, 12,500 BTU at the center rear, 10,000 BTU at the left front, and a 5,000 BTU Even-Heat burner with a melt cap at the left rear.

Four continuous cast iron grates cover the top, and the knobs sit at the right front.

Its JX3 downdraft matches the smaller JennAir: 3 speeds and a 297 CFM Motor Class blower system, with conversion to duct-free ventilation on an optional kit. The LP line again reads Convertible: Yes, Kit Included. The maker lists power outage compatibility and Flame-Sensing re-ignition, plus DuraFinish Protection. Printed dimensions run 36 inches wide, 21.5 inches deep, and 4 inches high, with a net weight of 80.6 lbs and electrical needs of 120 volts and 15 amps.

The limits mirror the 30 inch model. Griddle Included reads N/A on the spec sheet, so a griddle pan is a separate purchase that rides on the continuous grates. The vent rating is mid-pack while the burner spread is the best here, which makes this a cooktop-first, vent-second choice. The black glass finish also shows dust and dried splatter more than stainless does.

  • Pros: widest burner spread in the group; LP kit included; four continuous grates for a griddle pan; printed dimensions and weight; ADA compliant and UL listed per the maker
  • Cons: griddle included: N/A; vent rating mid-pack; black glass shows splatter between cleanings

Buy if burner layout drives the purchase and the vent is there to clear everyday steam and smoke. Skip if you fry at high heat daily and need the strongest downdraft rating in this group.

GE Profile 30 inch Built-In Gas Downdraft Cooktop, PGP9830DRBB

GE takes the opposite trade from JennAir: the strongest vent here, on a gas-on-glass ceramic surface with the mildest burners. The downdraft exhaust is rated 400 CFM at 7.0 sones on high speed, with a variable speed fan at 3 speeds. The vent is the headline spec of this model.

The four sealed burners list at 9,100 BTU for both left burners, 11,500 BTU at the right front, and 5,500 BTU at the right rear.

The conversion story is simple and complete for gas: an LP Conversion Kit is included, part WB28X45706, and the cooktop is factory set for natural gas. Controls are knobs at the front center with electronic ignition, the grates are medium cast, and the maker lists dishwasher cleaning for the grates and knobs. Printed dimensions are 29.75 inches wide and 21.875 inches deep, with an overall height of 23.875 inches that includes the downdraft housing, a cutout 28.75 inches wide and 20.5 inches deep, and a net weight of 60 lb.

Burner output is the limit: the strongest burner here is weaker than the second burner on either JennAir or KitchenAid, so big-pot boiling and hard searing take longer. The maker page does not list a duct-free conversion for this model, and it carries a limited 1-year labor and parts warranty, the shortest coverage in the group.

  • Pros: highest vent rating at 400 CFM; LP kit included; glass surface wipes down fast; printed cutout and weight figures; ADA compliant per the maker
  • Cons: lowest burner output in the group; no duct-free conversion listed; 1-year warranty; no griddle included

Buy if venting strength and an easy-wipe glass surface matter more than burner power. Skip if your cooking leans on a ripping-hot burner for searing and wok work.

Buying guide

A downdraft gas cooktop is three purchases in one box: a burner set, a vent, and a conversion plan for the fuel and ducting your house actually has. Score each part separately. A model that wins on burners can lose on venting, and the conversion kit that matters is the one your installer asks about on day one.

Downdraft strength: CFM and fan speeds

The vent ratings here run from 297 CFM Motor Class on the JennAir pair and 300 CFM on the KitchenAid pair to 400 CFM on the GE Profile, and all five fans offer 3 speeds. CFM is the maker’s rating for how much air the blower moves, and a downdraft works against rising heat as it pulls air down.

Capture depends on pan height and cooking style more than an overhead hood’s does, so match the rating to your cooking. Daily sauteing, soups, and pasta steam sit comfortably in the 297 to 300 CFM range these four models list. Frequent high-heat searing and frying push more smoke sideways before it sinks, which is where the GE rating earns its keep. Tall stockpots argue the other way: steam escapes above the vent intake no matter the rating, so no downdraft fully replaces a hood for canning-day steam.

LP conversion and duct-free conversion, explained

LP conversion retunes a cooktop built for natural gas to burn propane instead, with different orifices and regulator settings fitted from a kit. All five models list the path: JennAir and GE include the kit, and KitchenAid lists its LP Conversion Kit for both sizes.

If your home runs on a propane tank, the kit line on the spec sheet is the first thing to confirm, before burner counts.

Duct-free conversion is the second conversion in this keyword, and it concerns air, not gas. A duct-free setup filters the downdraft exhaust and returns it to the room instead of sending it outside. KitchenAid lists both cooktops as convertible to duct-free ventilation with a kit available separately, and JennAir lists the same conversion with an optional kit. The GE page lists no duct-free option, so ducted installation is the plan there.

Griddle expectations: what the grates allow

No maker page in this roundup lists a griddle in the box, and JennAir prints Griddle Included: N/A on both spec sheets. Griddle cooking on these cooktops means a separate flat griddle pan laid across two burners. That is the setup every grate design here is built to support.

The grate coverage makes it work: full-width cast-iron grates on the KitchenAid models and continuous cast iron grates on the JennAir models give the pan a level bed with no gaps to rock on.

Size the pan to the grate field, not the cooktop badge. On a 30 inch model a wide griddle pan covers two burners and leaves two for the rest of the meal; on a 36 inch model a fifth burner stays free. The GE model’s medium cast grates support a pan as well, though its lower burner output heats a big griddle surface more slowly. Buy the pan after the cooktop, with the grate measurements in hand.

Cutout and cabinet space come before features

A downdraft cooktop needs room below the counter for the blower housing, which is why the GE overall height of 23.875 inches includes the downdraft housing in its spec table. JennAir and GE both print their cutout figures on the product page for each model.

JennAir lists 28.625 by 19.938 inches for the 30 inch model, and GE lists a cutout 28.75 inches wide and 20.5 inches deep, so two standard-width models still cut different holes.

The KitchenAid pages print no dimensions at all, which makes the maker’s dimension guide a required read before ordering either size. Measure the existing cutout, the cabinet depth under it, and the duct path before comparing burner layouts. A cooktop that fits is worth more than a stronger one that needs cabinet surgery, and return freight on a built-in appliance is a problem nobody needs.

Controls, ignition, and cooking through an outage

All five models use knobs, placed at the right side on the 30 inch JennAir, the right front on the 36 inch JennAir, and the front center on the GE. KitchenAid and GE list electronic ignition, while JennAir lists Flame-Sensing re-ignition, which watches for a flame that blows out and relights it.

KitchenAid lists automatic re-ignition as well, so all three brands address the blown-out burner case in print.

JennAir adds one line the others do not: its spec sheets list both models as power outage compatible, meaning the burners can be lit when the house power is down. If outages are routine where you live, that line is worth more than a small CFM gap. Check the electrical figures too: the 36 inch JennAir lists 120 volts and 15 amps, and the GE lists 120V and 60 Hz, both ordinary household circuits.

FAQ

The questions below cover the three confusions this keyword creates: the griddle that is not in the box, the two different conversions hiding in one word, and what a downdraft can and cannot clear. Answers stick to the maker figures cited above and to general installation knowledge that applies to any built-in cooktop.

Do gas cooktops with downdraft and griddle and conversions include a griddle

No model in this roundup includes one. JennAir states Griddle Included: N/A on both spec sheets, and the KitchenAid and GE pages list no griddle among the included parts. The griddle in this keyword is a cooking style, not a bundled part: a separate griddle pan laid across the continuous or full-width cast-iron grates, heated by two burners.

Which gas cooktops with downdraft and griddle and conversions fit a 30 inch cutout

Three of the five are 30 inch models: the KitchenAid KCGD500GSS, the JennAir JGD3430GS, and the GE Profile PGP9830DRBB. Their printed cutouts still differ: JennAir lists 28.625 inches wide by 19.938 inches deep, and GE lists 28.75 inches wide by 20.5 inches deep.

KitchenAid prints no cutout on its product page, so its figure must come from the maker’s dimension guide.

Is a downdraft vent as strong as an overhead hood

It clears a different path. An overhead hood catches smoke and steam as they rise, while a downdraft pulls them down against their natural direction, so capture depends on cooking style, pan height, and how much smoke a dish throws sideways in the kitchen.

The ratings here, 297 to 400 CFM, handle daily cooking well; a kitchen built around constant high-heat frying is the case where a hood still wins.

What does an LP conversion kit actually change

It retunes the cooktop from natural gas to propane: burner orifices sized for LP gas, regulator adjustment, and the settings an installer verifies before first use. JennAir and GE include the kit in the box, GE under part number WB28X45706, and KitchenAid lists its kit for both sizes.

The work belongs to a qualified installer, and the converted cooktop keeps its full burner ratings on the new fuel.

Can a downdraft cooktop run without any ductwork

Two of the three brands list a path. KitchenAid lists both of its cooktops as convertible to duct-free ventilation with a kit available separately, and JennAir lists duct-free conversion with an optional kit on both models; the filtered air returns to the room instead of leaving the house.

The GE page lists no duct-free conversion, so plan on ducting for that model from the start.

Conclusion

Choose the JennAir JGD3536GB for burner range, the GE Profile for its 400 CFM vent, and a KitchenAid for the cleanest duct-free conversion path, with LP kits covered across all five. Buy your own griddle pan for the continuous grates, confirm the cutout from the maker’s printed figures, and the keyword’s three demands are each met on paper.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.