Updated Nov 16, 2026· 13 min read

Key takeaways

  • Five broadcast consoles compared for radio stations, from analog Audioarts and Arrakis boards to AoIP systems from Axia and Wheatstone, with call-in handling.

Quick verdict

In a hurry? The Audioarts AIR-4 is the compact analog answer for a small on-air studio, the Arrakis H15 adds remote control and Bluetooth to the same analog idea, and the Audioarts Lightning bridges analog sources with USB and digital outputs for bigger rooms.

Stations building on IP audio should look at the Axia iQ for a self-contained Livewire system or the Wheatstone L-12 for a WheatNet IP facility.

Product Type Faders / channels Program buses Call-in handling Connectivity
Audioarts AIR-4 Analog 12 + caller fader 2 13th fader, auto mix-minus USB to PC
Audioarts Lightning Hybrid analog/digital 12 or 16 4 stereo 2 phone channels, 2 mix-minuses USB, Bluetooth, AES
Arrakis H15 Analog 15 2 stereo Hybrid interface, 2 mix-minus feeds USB, Bluetooth
Axia iQ AoIP (Livewire+ AES67) 8 to 24 3 + utility bus Up to 8 auto mix-minuses Full AoIP network
Wheatstone L-12 AoIP surface (WheatNet IP) 12 4 stereo Per-fader Bus-Minus Full AoIP network

How we selected these mixers for radio stations

Each console here was checked against the working needs of a radio studio rather than a recording studio: enough microphone preamps for a host and guests, a proper way to put callers on air with mix-minus, control room and studio monitoring with talkback, cue for previewing sources off air, and metering an operator can read at a glance.

Models were verified from manufacturer pages, brochures and full specification documents opened during research, and only consoles the makers still list as current were included. That rule removed a well-known Arrakis board, the ARC-15, which its maker now marks discontinued and replaced by the H15 included below. General-purpose live mixers with no caller handling, no cue system and no broadcast monitoring were left out, however good they are on stage.

The five mixers for radio stations in detail

The list runs from the simplest wiring model to the most networked. The AIR-4 and H15 are self-contained analog consoles that wire up source by source. The Lightning keeps an analog heart but adds digital links. The iQ and L-12 move mixing into a network engine, so sources can live anywhere in the building and still land on a fader.

Audioarts AIR-4

The AIR-4 is a 12-channel analog radio mixer from Wheatstone’s Audioarts line, designed for small on-air studios, newsrooms, production rooms and remote work. Twelve input faders each offer A-B source selection, so two sources share a fader, and a 13th fader is dedicated to call-ins.

Four built-in microphone preamps with variable gain trims cover a host and three guests without external preamps, and the preamp outputs jumper to the A or B input of any fader. The caller fader provides talkback and an automatic mix-minus feed to the caller. Two program buses have balanced outputs switchable between stereo and mono, and external machine control with remote start logic runs from the faders.

Monitoring is complete for a small studio: a built-in cue speaker that can interrupt the main monitors, split cue, control room and headphone monitoring with source selection, a studio output with its own source selection and control-room-to-studio talkback, and automatic muting when the control room mic is live. An on-air light LED sits on the front panel with a closure output for an external relay. A patchable USB connection can sit on any fader and pick up the program 1 or program 2 mix, linking the console to a PC for news, production or streaming. Faders plug in for easy replacement, and the console runs from the maker’s HPS-516 supply.

  • Pros: complete small-studio feature set in one compact frame; four mic preamps built in; dedicated caller fader with auto mix-minus; patchable USB for the automation or streaming PC
  • Cons: analog wiring only, so every source needs its own cable run; only two program buses; no built-in Bluetooth or network audio

Buy if: you run a small station, an auxiliary studio or a newsroom and want a self-contained analog console that covers callers, cue and monitoring. Skip if: your facility is moving to networked audio, where the iQ or L-12 fit the plan.

Audioarts Lightning

Lightning is Wheatstone’s hybrid: an analog console with digital conveniences, sold in 12- or 16-channel tabletop frames with a modular layout of four channel input panels plus a master and monitor panel. It suits studios where most sources are microphones and analog gear but the PC and phones still need a way in.

Four stereo program buses carry balanced outputs switchable between stereo and mono. Four high-performance mic preamps include variable gain trims and switchable +48 V phantom power, and further four-preamp cards can be added. Two phone channels are always included, with two auto mix-minuses for call-ins and talkback to callers and to the studio. Every input channel has A/B source selection, with a balanced line input for the A source and a trimmable -10 to +4 line input on B.

The digital side provides two USB inputs/outputs for editing software and call applications, Bluetooth for receiving and recording calls from mobile phones or playing cuts from a player, a patchable AES input that can land on any fader, and built-in A/D conversion so the main program output is available as balanced analog, AES3 digital, or both at once. Monitoring includes three VU meter pairs, a built-in cue speaker that can interrupt the main monitors, split cue and a headphone jack with its own amplifier. Published figures include frequency response of +/-0.2 dB from 20 Hz to 20 kHz, mic EIN of -128 dB, line dynamic range of 110 dB and maximum output of +28 dBu. The 16-channel frame measures 36.75 in wide and weighs 30 lbs, powered by a separate rackmount SPS-202 supply.

  • Pros: four program buses and two phone channels standard; USB, Bluetooth and AES cover modern sources without giving up analog operation; program output available in analog and digital at once; expandable mic preamp count
  • Cons: the largest and heaviest console here in 16-channel form; no full AoIP networking, so sources still wire to the console; separate rackmount power supply to house

Buy if: your studio is analog at heart but needs callers from mobile phones, PC audio and a digital feed for the processor or stream. Skip if: you want the smallest possible board, or a fully networked facility.

Arrakis H15

The H15 is Arrakis Systems’ current 15-channel analog console, the successor to the long-running ARC-15. It keeps the configurable layout Arrakis is known for and adds software control: the H-Series Controller provides remote console control, user presets, custom channel labels and remote audio monitoring.

The 15 channels are configured to the studio: between 1 and 5 mic channels with high-performance XLR inputs and preamps, with optional 48 VDC phantom power, and between 7 and 12 stereo line inputs on active balanced RJ45 connectors, each with its own trim. Both balanced and unbalanced inputs are supported. Two stereo output buses provide balanced and unbalanced outputs. A phone hybrid interface includes cue for listening to a caller off line, talkback to the caller, and two mix-minus feeds for phone callers.

A USB play and record interface works with Windows or Mac computers as a USB sound card for automation, playback or recording software, and a Bluetooth channel is built in as standard for streaming music or taking callers. Practical touches include LED-illuminated switches, long-life faders, electronic switching of audio paths, lighted VU meters, an up/down timer, logic control, and automatic restore of settings after a power loss. Mic and line selection is made with a rear dip switch.

  • Pros: channel mix is configured to the studio at order time; remote control and presets through the H-Series Controller; Bluetooth and USB built in rather than optional; two mix-minus feeds for callers
  • Cons: phantom power is an option rather than standard; analog-only audio paths, with no AoIP option on the console itself; configuration choices are fixed once the board is built

Buy if: you want a traditional analog on-air board that a presenter can also drive from software, with callers handled properly. Skip if: your station plans to network its studios over IP.

Axia iQ

The iQ is Telos Alliance’s entry into full audio-over-IP: a console system built from an 8-fader main frame plus the StudioCore integrated console engine, expandable with additional frames to 24 faders. No audio passes through the surface itself; all mixing and processing happens in the engine.

The engine is a fanless 2RU unit that also holds the power supply and a five-port AoIP Ethernet switch with PoE.

The system is fully Livewire+ AES67 compliant and can run standalone or join an Axia network, with up to four StudioCore engines daisy-chained without an external switch. Three dedicated stereo program buses plus a stereo utility bus (for phone calls, off-air recording, or a fourth program feed) give four main stereo outputs. Automatic mix-minus is provided on every fader, with up to eight usable at once, alongside a talkback system, a one-button Record Mode for phone bits and interviews, and an automixer on all channels.

Each fader has a 100 mm conductive-plastic fader, an OLED source display, a confidence meter and a stereo preview (cue) function with an interlock for fast cuing. The Options knob adjusts source assignment, gain trim, three-band per-source EQ, pan and balance and phase. High-resolution OLED meters switch between VU and PPM styles, and four Show Profiles store complete console snapshots for different shows. StudioCore provides 32 audio I/O connections: four selectable mic/line inputs, eight dedicated line inputs and outputs, and three digital inputs and outputs configurable as AES/EBU, S/PDIF or USB Audio, plus two headphone outputs with independent amplifiers and four GPIO ports. Latency is under 3 ms from mic in to monitor out, and the whole system is configured and managed from a web browser.

  • Pros: any source on the network can land on any fader; self-contained engine with I/O, switch and power in one unit; per-fader mix-minus and Show Profiles suit multi-show stations; grows from 8 to 24 faders
  • Cons: commits the station to the Livewire ecosystem for full value; local I/O count is fixed by the engine, so bigger plants need network nodes; surface carries no audio, so the engine is a single point the design must protect

Buy if: you are building or rebuilding a station on IP audio and want one box that starts a network. Skip if: your studio is a single room with a handful of wired sources, where the analog boards are simpler.

Wheatstone L-12

The L-12 is a 12-fader control surface for Wheatstone’s WheatNet IP network, built for news and production studios that already run, or plan to run, networked audio. The surface is low-profile and tabletop, with no furniture cutout needed, and its fader modules are hot-swappable down to the individual fader.

Mixing and I/O live in the included IP88CBL Console Audio BLADE, a single-rack-space unit that connects to the surface over standard Ethernet. Any source on the network can be assigned to any fader, with A/B dual input switching for a backup source on the same channel. Each fader accesses four stereo output buses and a stereo cue bus, and has its own Bus-Minus: an auto-generated mix-minus that can feed a telephone hybrid, or be set as a direct output, with talkback that interrupts the feed.

The meter bridge carries three sets of high-resolution LED meters and a digital timer. Control room and headphone outputs have level controls and source selection, the headphone amplifier is built in, a studio monitor output is independent, and the L-12 adds a built-in cue speaker. Configuration snapshots can be saved and recalled for different sessions. The BLADE provides four AES inputs, four stereo analog inputs, four AES outputs and four stereo analog outputs on RJ45 connectors, control room and studio outputs on XLR, two mic level inputs with gain trim and switchable phantom power, cue and headphone outputs, and 12 GPI logic ports. The surface measures 25 5/8 in wide by 16-1/4 in deep and uses a compact external power supply.

  • Pros: full WheatNet IP routing with any source on any fader; per-fader Bus-Minus and talkback for hybrids; hot-swappable fader modules keep the station running during service; low-profile surface needs no desk cutout
  • Cons: value depends on a WheatNet IP network around it; only two local mic inputs on the console BLADE, with more I/O needing extra BLADEs; a surface-plus-engine system is more to install than a self-contained analog board

Buy if: your facility runs WheatNet IP or is moving that way and needs a news or production surface that shares every source in the building. Skip if: you need a standalone console with all its I/O on the back panel.

Buying guide: choosing mixers for radio stations

Broadcast consoles differ in architecture more than in channel count, and the differences decide how a station wires, works and grows. The questions below separate the designs that matter on air: how callers are handled, how monitoring behaves, and whether the console wires up locally or joins a network.

Analog, hybrid or AoIP

Analog consoles like the AIR-4 and H15 wire every source to the back panel and keep working through any network problem. Hybrid designs like Lightning add USB, Bluetooth and digital outputs to that base, and AoIP consoles like the iQ and L-12 move audio onto a network.

That network freedom comes at the price of committing to one maker’s network system, since each AoIP family speaks its own language first and shares with others second.

Caller handling and mix-minus

A caller must hear the program without hearing their own voice back, which is the mix-minus feed. Check how many feeds a console generates: one on the AIR-4’s caller fader, two on the Lightning and H15, per-fader on the L-12, and up to eight at once on the iQ.

Talkback to the caller off air and a cue path for screening calls matter just as much during a live show, since a caller who has been screened and briefed sounds calmer and clearer on air.

Monitoring, cue and talkback

The operator needs control room speakers that mute when the studio mic opens, a cue path for previewing sources, and talkback to the studio and to callers. All five consoles here cover that broadcast basics list, but the details differ: built-in cue speakers on the AIR-4, Lightning and L-12 save a separate cue amp.

Split cue, offered on the analog Audioarts boards, helps when screening calls while the show runs.

Program buses and outputs

Count the feeds you actually send: the main program, a stream encoder, a recording, maybe a second station or a web channel. Two buses cover a simple station; the Lightning and L-12 offer four stereo buses, and the iQ adds a utility bus that can act as a fourth program feed.

Digital outputs, AES on the Lightning and network streams on the AoIP boards, feed processors and encoders without another conversion stage in the chain.

Growth and service

Consoles stay in service for years, so check how each design grows and gets fixed. The iQ adds fader frames and network nodes; the Lightning accepts extra mic preamp cards; the L-12 swaps fader modules while powered; the analog boards rely on plug-in faders and socketed parts.

A design your engineer can service at module level beats one that ships back as a whole unit, especially for a station with no spare console to fall back on.

FAQ

Common questions from station engineers and operators choosing an on-air console, covering callers, networking, monitoring and the differences from ordinary studio mixers. The short answers below assume a single main studio; multi-studio plants add network questions on top.

What makes a radio console different from a normal mixer?

Broadcast consoles add the tools a live show needs: mix-minus feeds so callers do not hear themselves, cue for previewing sources off air, control room muting when a microphone opens, talkback to studio and callers, remote start for playback machines, and on-air light logic. A recording mixer rarely includes any of those.

How many microphone inputs does a radio studio need?

Most talk formats run a host plus two or three guests, which the four preamps on the AIR-4 and Lightning cover exactly. Music stations with a single presenter can manage with fewer. Consoles on a network, like the iQ and L-12, draw microphones from network I/O, so the count depends on the nodes fitted rather than the surface.

Can these consoles feed a stream as well as the transmitter?

Yes. A second program bus is the usual route: the AIR-4 and H15 provide two stereo buses, the Lightning and L-12 four, and the iQ four main outputs plus network streams. The AIR-4 can also send its program mix to a PC over USB, and the Lightning offers its program output as AES3 digital at the same time as analog.

Do AoIP consoles work without a facility network?

The iQ can: its StudioCore engine includes I/O and a built-for-broadcast switch, so a single studio runs standalone and joins a network later. The L-12 is designed as part of a WheatNet IP system; its console BLADE makes a self-contained single studio possible, but its routing strengths show when other BLADEs and studios share the network.

What is a Bus-Minus or mix-minus output used for besides phones?

Any two-way source needs it: phone hybrids, remote codecs, video call inputs and outside broadcast links all feed the contributor a mix of everything except themselves. The same output can often serve as a direct channel output for recording one source on its own, as on the L-12.

Conclusion

For a single self-contained studio, the Audioarts AIR-4 and Arrakis H15 are the most direct mixers for radio stations on this list, with the Lightning adding digital links and more buses. For facilities building on networked audio, the Axia iQ starts a Livewire plant in one engine, and the Wheatstone L-12 fits an existing WheatNet IP system.

M
Modern Line Home Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.