Key takeaways
- Five box mod kits read under a zero-nicotine brief for non smokers, compared on battery format, output range, tank and coils from printed maker spec sheets.
No maker page opened for this guide markets a mod for non smokers, because a mod is hardware sold without liquid. Read under a zero-nicotine brief, a vape mod for non smokers is a kit whose tank is filled with a 0 mg liquid, and these five single-cell kits are compared on the specs their makers print.
Quick verdict
All five kits are single-cell box mods in the 100W class, sold with a refillable tank and no e-liquid in the printed box contents. The nicotine question never reaches the hardware: it is settled by the liquid poured into the tank, and bottled liquids print 0 mg among their listed strength options.
The five split by battery and by tank. The Geekvape S100 and the Eleaf iStick XC100 print the widest coil lists, the VOOPOO Drag M100S and the Vaporesso Armour S accept either an 18650 or a 21700 cell, and the Innokin Kroma 217 adds a third option, the 20700. The Armour S prints the largest glass option, an 8mL bubble tube in the box next to its 5mL tank, while the Kroma 217 prints the clearest battery indicator, a three-color scale with printed percentage bands. Every kit charges over USB-C and every kit leaves the battery itself as a separate purchase.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Geekvape S100 (Aegis Solo 2) Kit | Single-cell box mod kit | Readers who want a printed IP68 rating | 5-100W, Z 2021 tank 5.5mL | 18650 only, sold separately |
| VOOPOO Drag M100S Starter Kit | Single-cell box mod kit | Readers who want two cell formats | 5-100W, 18650 or 21700, adapter included | Only two coils in the PnP list printed |
| Vaporesso Armour S Kit | Single-cell box mod kit | Readers who want the largest glass option | 5-100W, 8mL bubble glass included | 21700 cell is the native fit, 18650 needs the sleeve |
| Innokin Kroma 217 Z Force Kit | Single-cell box mod kit | Readers who want three cell formats | Max 100W with 21700, three-color battery indicator | Maker page prints no wattage floor |
| Eleaf iStick XC100 Kit with Melo X Tank | Single-cell box mod kit | Readers who want the longest coil list | 5-100W, five EC coil series listed | Only two modes printed, Power and RTA |
How we selected
Each kit was read on an opened maker or listing page, and the figures used here are the figures printed there: output range, battery format, tank capacity, coil resistances and their printed wattage bands, charging spec and box contents. The zero-nicotine reading is applied the same way to all five kits.
The reading works like this. A box mod kit is a battery device and a tank; the printed box contents for these five kits list hardware, coils, glass and cables, and no e-liquid. Nicotine enters a setup only through the liquid, and bottled e-liquid lines print their strengths on the bottle, with 0 mg printed among the options on the lines sold for refillable tanks. So a kit in this guide is a non smokers pick only in the sense that it can be run entirely on 0 mg liquid, and the comparison below stays on the hardware specs that differ between the five.
Five picks for a vape mod for non smokers
The five kits share a class, a single external cell and a 100W ceiling, so the entries below lean on the printed differences: cell formats accepted, coil families and their bands, tank glass options, indicators and controls. Each entry ends with a plain buy-if and skip-if line.
Geekvape S100 (Aegis Solo 2) Kit
The S100 prints an output range of 5 to 100W from a single 18650 battery that is sold separately. The features list prints an IP68 rating for water, dust and shock resistance, an A-Lock system, and modes named Power, VPC, Bypass and Stealth, with charging over USB-C.
The tank is the Geekvape Z 2021, holding 5.5mL in bubble glass, with a dual slotted top airflow control ring and a threaded top fill with dual fill ports. Coils are press-fit Z coils: the box holds a Z 0.2 ohm coil printed for 70 to 80W and a Z 0.25 ohm dual coil printed for 45 to 57W, and the Z series list also prints a 0.15 ohm coil for 80 to 90W and a 0.4 ohm coil for 50 to 60W. Ten colors are listed, including Grey, Classic Black, Navy Blue, Pink Gold and Rainbow Purple. One line in the page’s extra details wrongly describes the kit as a dual-battery device; the description and the features list both print a single 18650, and that is the figure used here. For a zero-nicotine setup the relevant point is simpler: the tank is refillable, so the liquid strength is chosen at the bottle, not by the kit.
Pros: a printed IP68 rating, four printed Z coil options and a physical A-Lock. Cons: it accepts only the 18650 format, and the printed coil bands all sit in the mid to high range. Buy if you want a sealed-rating kit with a broad coil list. Skip if you already own 21700 cells and want to use them.
VOOPOO Drag M100S Starter Kit
The Drag M100S prints a GENE.TT 2.0 chipset, output of 5 to 100W and a resistance range of 0.05 to 3.0 ohm. It runs on a single 18650 or 21700 battery, not included, and an 18650 adapter is included in the box, so either cell format fits the same tube.
The UFORCE-L Tank holds 5.5mL and takes its airflow from the top, through three top air inlets, with a quarter-turn top fill. Its coils are from the PnP line: a PnP-TW15 0.15 ohm coil printed at 70 to 85W on this page and a PnP-TW20 0.2 ohm coil printed at 55 to 70W. The printed modes are RBA, Smart, Eco and TC, with TC listed for nickel, titanium, SS316 and SS430 wire. A TFT display sits on a curved zinc alloy body with matte or wood accents, a dynamic switch works as the lock, and a USB Type-C cable is printed in the box contents. Three color pairings are listed: Cyan and Blue, Red and Black, and Silver and Black. The listing page marks the kit as a sale item at the time it was read.
Pros: two cell formats with the adapter included, top airflow, and four printed modes including a TC suite. Cons: only two PnP coil ratings are printed on the page, and the battery is a separate purchase in either format. Buy if you hold both 18650 and 21700 cells. Skip if you want a long printed coil list before you buy.
Vaporesso Armour S Kit
The Armour S prints an AXON chipset and output of 5 to 100W. Its native cell is a single 21700, and it also takes an 18650 through an included sleeve adapter, with the battery itself not included. The printed modes are Smart, Pulse, F(t), ECO and TC, plus a Wattage mode.
The tank is the iTank 2 at 5mL with an auto-open top fill, and the box also includes an 8mL bubble glass tube, the largest printed capacity option in this guide. The coils are GTi Mesh coils: a 0.2 ohm coil printed for 60 to 75W and a 0.4 ohm coil printed for 50 to 60W, the same GTi family printed for the maker’s larger kits. The body mixes zinc-alloy and silicone with TPU full-body protection, the display is a 0.96 inch TFT color screen, and the fire button locks by sliding. A Type-C USB cable is listed, and five colors are printed: Black, Green, Orange, Yellow and Silver. Readers comparing tank sizes should note the 8mL figure belongs to the spare bubble glass, while the fitted glass prints 5mL.
Pros: the largest glass option here, two cell formats, and a slide-to-lock fire button. Cons: the native 21700 format means one more cell type to buy for readers who only hold 18650 cells. Buy if fewer refills matter more than a slim tube. Skip if you want to stay with 18650 cells only and no adapter.
Innokin Kroma 217 Z Force Kit
The Kroma 217 takes a single external 21700, 20700 or 18650 battery, not included, the widest cell choice in this guide. The page prints a maximum of 100W with a 21700 battery fitted; it does not print a wattage floor or a lower cap for an 18650, so neither figure is stated here.
Charging is USB-C at 5V and 1.7A. The battery indicator prints three bands: red under 10 percent, yellow from 10 to 60 percent and green over 60 percent. The cut-off time adjusts from 3 to 18 seconds, and the connection is a 510 thread on a zinc alloy body. The Z-Force Tank holds 5ml, fills from the top through a slide-open cap, and adjusts airflow at the bottom. Its DuoPrime ZF coils print as a 0.2 ohm coil for 50 to 80W and a 0.3 ohm coil for 30 to 45W, wound in KAL Kanthal, the lowest printed coil bands in this list. The resistance range prints 0.1 to 3.5 ohm, and the maximum output current prints 28.5A on an 18650 and 32A on a 21700.
Pros: three cell formats, the lowest printed coil bands here, and a battery indicator with printed percentage bands. Cons: no printed wattage floor, and the 100W figure is printed for the 21700 format only. Buy if you run lower-power coils and hold mixed cell formats. Skip if you want every output figure printed before you order.
Eleaf iStick XC100 Kit with Melo X Tank
The iStick XC100 prints output of 5 to 100W from a single external 18650 or 21700 battery, not included, in an aluminum alloy body measuring 39.3 by 29.2 by 149.6mm. Charging is 5V and 2A over USB-C, the display is a 1.05-inch TFT, and the printed modes are Power and RTA.
The Melo X Tank holds 5ml and fills from the top. Its printed coil support is the longest list in this guide: five EC series, named EC-D, EC-A, EC-2, EC-M and EC-N, with printed resistances including EC-D Dual Mesh at 0.15, 0.3 and 0.5 ohm, EC-A Mesh at 0.15, 0.3 and 0.5 ohm, EC-2 Mesh at 0.3 and 0.5 ohm, and EC-M and EC-N Mesh at 0.15 ohm. The kit box holds an EC-D 0.3 ohm coil, an EC-D 0.5 ohm coil and an extra 5ml glass, and the drip tip is a replaceable 510 fitting. Five colors are listed: Red-Yellow Gradient, Black, Sky Blue, Red-Blue Gradient and Silver. The page prints no wattage bands for the EC coils, so none are given here; the resistance list is the printed figure to compare.
Pros: the longest printed coil support list here, two cell formats, and a spare glass in the box. Cons: only two printed modes, and no printed coil wattage bands on the page. Buy if coil choice matters more than mode count. Skip if you want printed wattage bands for every coil.
Buying guide
Under a zero-nicotine brief the buying questions change order. The liquid question comes first and is answered at the bottle, and the hardware questions after it are the ordinary printed ones: cell format, output range, coil family and tank size. The five sections below follow that order.
What zero nicotine means for a mod kit
Zero nicotine is a property of the liquid, not of the device. A mod kit prints a battery format, an output range and a tank, and the strength that ends up in the tank is printed on the bottle the owner buys, where 0 mg appears among the listed options on bottled lines for refillable tanks.
That is why no kit can be bought in a non smokers version and why no page opened for this guide uses that wording. Any of the five kits here runs on 0 mg liquid in exactly the same way it runs on any other printed strength, because the device reads the coil, not the bottle. Readers who want a nicotine-free setup should spend their attention on the bottle label and treat the kit choice as a hardware choice.
Battery formats: 18650, 20700 and 21700
The S100 prints a single 18650. The Drag M100S and the Armour S print a 21700 with an included 18650 adapter or sleeve, and the XC100 prints a single 18650 or 21700. The Kroma 217 prints the widest choice, a single 21700, 20700 or 18650, with its 100W maximum printed for the 21700.
None of the five kits includes the battery, so the cell is a separate purchase with its own printed ratings. A reader who already owns cells should match the formats printed on the kit page first; a reader starting from nothing can pick the format the kit was built around, which is the 21700 for the Armour S and the 18650 for the S100.
Output range and modes on paper
Four kits print a 5 to 100W range, and the Kroma 217 prints a 100W maximum without a printed floor. Mode lists run from two on the XC100, Power and RTA, to six printed entries on the Armour S page, which lists Smart, Pulse, F(t), ECO, TC and a Wattage mode.
Temperature control appears on the Drag M100S, with four wire types printed, and is not printed for the S100, whose mode list runs Power, VPC, Bypass and Stealth. A reader who never fits TC wire loses nothing with the shorter list, and a reader who does should check that the wire type is printed, as it is on the VOOPOO page.
Tank size and coil families
Fitted tank capacities print at 5.5mL for the S100 and the Drag M100S and at 5mL for the Armour S, Kroma 217 and XC100, with the Armour S adding an 8mL bubble glass in the box. Printed coil bands start lowest on the Kroma 217, at 30 to 45W for its 0.3 ohm ZF coil.
Coil families are brand-bound: Z coils for the S100, PnP for the Drag M100S, GTi for the Armour S, DuoPrime ZF for the Kroma 217 and the EC series for the XC100. The XC100 prints the most coil options and no wattage bands, while the other four print two box coils each with bands. Spare coils are an ongoing purchase, so the printed family list is worth reading before the kit itself.
Reading a vape mod for non smokers listing page
A listing page for a vape mod for non smokers will not carry that phrase; it will carry the hardware figures. The lines to read are the battery format line, the output line, the tank capacity line and the coil list, and each of the five pages here prints all four in its own layout.
Two cautions come from the pages themselves. The S100 page contains one stray line describing a dual-battery device, against its own description and features list, and the Kroma 217 page leaves its wattage floor unprinted. Where a page disagrees with itself or stays silent, this guide follows the fuller spec list and prints nothing for the missing figure.
FAQ
These answers cover the questions the zero-nicotine reading raises most often: the label itself, what is in the box, low-power use, physical size and tank fit. Each answer rests on the figures and box contents printed on the five pages used for this guide.
Is any vape mod for non smokers sold under that label?
No. No page opened for this guide markets a mod for non smokers, and no kit here is sold in a separate non smokers version. Makers print hardware specs and sell the kit as a device with a tank; the audience wording lives in search phrases, not on the box.
The zero-nicotine reading is the workable version of the brief: choose any of the five kits on its printed specs, then fill the tank with a liquid whose bottle prints 0 mg. The device neither adds nor removes nicotine, so the label on the bottle is the whole of the nicotine decision.
Does a mod kit contain nicotine?
The printed box contents for these five kits list hardware: a mod, a tank, coils, spare glass on some kits, and a USB charging cable. No e-liquid is printed in any of the five box lists, so a new kit on its own contains no liquid and no nicotine at all.
Nicotine appears only when the owner fills the tank, and the amount is the strength printed on the bottle they choose. Bottled lines print a ladder of strengths, and 0 mg is the printed option that keeps a setup nicotine-free.
Can these kits run low-power coils?
Four of the five print a 5W floor, so low-power coils sit inside the printed range of the S100, Drag M100S, Armour S and XC100. The printed box-coil bands are higher, from 30 to 45W at the lowest on the Kroma 217 up to 80 to 90W at the top of the S100 Z coil list.
The Kroma 217 is the low-power pick on paper, with the lowest printed coil bands here and a maximum printed for its 21700 format. Its page prints no wattage floor, so a reader who needs a printed floor figure should choose one of the other four.
Which of these kits is the smallest?
Only the XC100 page prints full kit dimensions among the five kits: 39.3 by 29.2 by 149.6mm. The S100, Drag M100S, Armour S and Kroma 217 pages do not print kit dimensions, so no size ranking is claimed here and no figure is borrowed from another model.
All five are single-cell kits in the same output class, so their bodies sit in the same general format: a tube or compact box holding one cell, a display and a tank on top. A reader comparing pocket fit should read the dimensions line on the listing page of the exact kit before ordering.
Do the tanks fit other mods?
The Kroma 217 prints a 510 thread, and the XC100 prints a replaceable 510 drip tip, but the other pages do not print a connection figure for the mod itself. Tank swapping also depends on the coil family, and each tank here is printed for its own maker’s coil line.
The practical reading is that each kit is sold as a matched pair of mod and tank. A reader who plans to mix brands should confirm the connection type and the coil family on both listing pages, since neither figure can be assumed from the kit name.
Conclusion
Read as plain hardware, the five kits separate cleanly: the Kroma 217 for low printed coil bands and three cell formats, the Armour S for its 8mL glass option, and the S100 for its printed IP68 rating. Any of them runs a 0 mg liquid, which is what makes a vape mod for non smokers a workable, honest brief.