Updated Nov 16, 2026· 16 min read

Key takeaways

  • Six MTL starter kits for smokers compared on printed specs only: battery size, pod and tank capacity, the coils in each box, charging and the full contents.

An adult smoker comparing a first mtl starting kit for smokers meets dozens of similar boxes, and the printed figures are the honest way to separate them. This guide lines up six kits and compares battery size, pod or tank capacity, coil options, charging and box contents, using only specs that maker and listing pages publish.

Quick verdict

On printed specs alone, the Vaporesso GTX One Pro carries the largest battery of the six at 3000mAh and the widest output range, while the OXVA Artio is the smallest and plainest kit here. The other four sit between those poles, trading tank size, coil choice and charging speed in different proportions.

Battery size orders the group clearly. The GTX One Pro lists 3000mAh, the Aspire Zelos Nano lists 1600mAh, the Innokin Endura T20-S and the Justfog Q16 Pro Plus each list 1500mAh, the Aspire Flexus Q lists 700mAh, and the OXVA Artio lists 550mAh. None of those figures is a promise of hours or days; only two of the six pages attach any run-time wording to the number, and both wordings come from the seller side of the page rather than from a test.

Capacity splits the group a different way. The Q16 Pro Plus holds 3ml in its clearomizer, while the Zelos Nano, the Endura T20-S, the Artio and the Flexus Q each hold 2ml in a tank or pod. The GTX One Pro listing does not print a capacity figure for its XTank T at all, which is a real gap in an otherwise detailed spec sheet and worth knowing before ordering.

Product Type Battery Pod or tank Coils in the box Main limit
Vaporesso GTX One Pro Vape Kit Mod and tank kit 3000mAh XTank T, capacity not printed 0.6 ohm fitted, 1.2 ohm spare Largest kit here, 140g
Aspire Zelos Nano Starter Kit Mod and tank kit 1600mAh 2ml Nautilus Nano tank 1.0 ohm mesh, 1.8 ohm BVC Listing limits it to 70/30 liquid
Innokin Endura T20-S Kit Pen kit 1500mAh 2ml Prism T20 S tank 0.8 ohm fitted, 1.5 ohm spare Fixed output, Micro USB charging
Justfog Q16 Pro Plus Kit Pen kit 1500mAh 3ml clearomizer 1.2 ohm and 1.6 ohm Q16 Voltage steps, no wattage dial
Aspire Flexus Q Pod System Pod kit 700mAh 2ml pod 0.6 ohm and 1.0 ohm AF mesh Small battery, maker-stated fast charge
OXVA Artio Kit Pod kit, inhale activated 550mAh Two 2ml refillable pods Built-in mesh coils Listing prints no coil resistance

How we selected

Every kit in this guide was taken from a product page that could be opened and read in full, and each figure quoted here is copied from that page. Kits whose pages could not be opened, or that sellers list as discontinued or out of stock, were left out rather than described from search results or from memory.

The first filter was the draw. Each kit had to be listed by its maker or seller as a mouth-to-lung kit, with coils or pods in the resistance range that style uses. The second filter was completeness: a starting kit should arrive with a device, a tank or pod, at least one coil, and a way to charge, and the contents list on the page had to say so. The third filter was print quality. Pages that publish battery capacity, output, coil resistances and contents earned their place; a page that stays silent on a figure is still usable, but the silence is reported in the entry instead of being filled in.

Nothing in this guide claims that any kit helps anyone stop smoking. The pages sell hardware, the keyword asks about hardware, and the comparison stays on hardware: batteries, tanks, pods, coils, ports and box contents. Nicotine strength is a property of the liquid a buyer chooses separately, and no page opened for this guide recommends a strength for any reader, so none is recommended here.

MTL starting kit for smokers: the six kits in detail

The six kits below are ordered from the largest battery to the smallest, which is a plain way to see the trade the whole group makes: bigger cells, screens and menus at one end, plain draw-activated pens at the other. Each entry sticks to the specs its own page prints and names the gap where a page stays silent.

Vaporesso GTX One Pro Vape Kit

The GTX One Pro is the most adjustable kit in this group: a 3000mAh built-in battery, output from 5 to 40W on the AXON chip, a 0.87 inch OLED screen and the XTank T, which fills from the top and takes its airflow from the top as well. Two GTX mesh coils come in the box, a 0.6 ohm fitted and a 1.2 ohm spare.

Vaporesso lists four mesh resistances for this kit. The fitted 0.6 ohm coil is rated at 20 to 26W and the boxed 1.2 ohm coil at 8 to 12W, which is the tight mouth-to-lung end of the range; the 0.8 ohm coil sits at 12 to 16W and the 0.4 ohm at 26 to 32W. The chip offers Pulse and Eco modes, and a SMART setting that suggests a wattage for the fitted coil. A lock button guards against presses in a pocket, and the menu carries a five day puff counter. Vaporesso puts the battery at up to three days a charge in its own figures, which is a maker figure rather than a measured one.

The box also holds a straight spare drip tip, a spare glass tube, two O-rings, a refilling silicone plug and a USB-C cable, and charging is listed at 5V/2A over USB-C. The mod is 510 threaded and 23.2mm wide, and the kit measures 137.25 x 23.2 x 30.05mm at 140g, the largest and heaviest entry here. The one figure the listing never prints is the XTank T capacity in milliliters.

  • Pros: largest battery and widest coil range of the six, top fill and top airflow, spare glass and two drip tips in the box.
  • Cons: tank capacity not printed on the listing, 140g weight, menus and modes to learn.
  • Buy if: you want one kit that covers tight and looser draws with printed wattage bands for every coil.
  • Skip if: you want the smallest possible kit, or a printed tank capacity matters before you order.

Aspire Zelos Nano Starter Kit

The Zelos Nano pairs a 1600mAh mod with the 2ml Nautilus Nano tank and keeps adjustment simple: three wattage levels in Smart VW mode, set around the fitted coil. The box holds two coils, a 1.0 ohm Nautilus mesh coil and a 1.8 ohm Nautilus BVC coil, plus a spare glass tube and spare O-rings.

The printed wattage ranges follow the coils: 13 to 15W with the 1.0 ohm coil and 10 to 14W with the 1.8 ohm coil, across a supported resistance range of 0.5 to 3.0 ohm. The tank fills through a top-slide mechanism and adjusts airflow at the base. The mod charges over Type-C at 1A and connects to the tank on a standard 510 thread, and the page lists compatibility with Nautilus, Nautilus 2 and Nautilus 2S coils, which gives this kit the deepest replacement-coil bench of the six. One limit is printed on the same page: the listing describes the kit as compatible only with 70VG/30PG e-liquid, a ratio note worth respecting when choosing liquid.

  • Pros: two different coils in the box, wide Nautilus coil compatibility, spare glass included, 510 thread.
  • Cons: three set levels rather than full wattage adjustment, liquid ratio limit printed on the listing.
  • Buy if: you like the mod and tank format and want coils that are sold almost everywhere the brand is stocked.
  • Skip if: you prefer pods with built-in coils, or you use liquid ratios other than the one the listing names.

Innokin Endura T20-S Kit

The Endura T20-S is the plainest mod-and-tank kit here: a 1500mAh built-in battery, a fixed maximum output of 18W with no wattage adjustment at all, and the 2ml Prism T20 S tank with a top-fill cap. A 0.8 ohm Prism S coil comes fitted and a 1.5 ohm Prism S coil is in the box as the spare, next to a spare drip tip.

The rest of the printed sheet is equally plain: maximum output current of 6A, maximum output voltage of 3.85V, and a minimum resistance of 0.6 ohm. Charging runs over Micro USB at DC 5V/0.5A, which makes this the only kit in the group on the older port, and the smallest printed charge figure of the six. The listing states that the 1500mAh battery typically lasts a full day for moderate vapers, in the seller’s own wording. For a smoker who wants a pen that asks for no settings decisions, that plainness is the point of the kit; for anyone who likes to tune output, it is the ceiling.

  • Pros: no settings to manage, two coils and a spare drip tip in the box, top-fill tank.
  • Cons: Micro USB charging at 0.5A, fixed output, no airflow adjustment described on the page.
  • Buy if: you want a single-button pen kit and already own Micro USB cables.
  • Skip if: you want USB-C, adjustable wattage, or a screen.

Justfog Q16 Pro Plus Kit

The Q16 Pro Plus is a slim pen kit built around voltage rather than wattage: a 1500mAh built-in battery with four printed voltage levels, 3.5V, 3.8V, 4.1V and 4.4V, shown on LED indicators. Its clearomizer holds 3ml, the largest capacity in this group, and fills from the side through a sliding panel.

The clearomizer is made from PCTG, adjusts airflow at its base, and takes an interchangeable 510 drip tip. Two coils are included, a 1.2 ohm and a 1.6 ohm, and the listing describes the 1.2 ohm coil as the tight-draw option for liquids at 50 percent VG or less, with the 1.6 ohm tighter still; the kit also works with Q16 FF coils. The features table prints a power range of 1 to 20 watts. A charge indicator reads white at 65 to 100 percent, blue at 30 to 65 percent and red below 30 percent, charging is over USB-C, and the listing describes the whole kit as weighing less than 100 g. After a coil change, the listing recommends waiting 10 minutes for the new coil to absorb liquid.

  • Pros: largest capacity at 3ml, four clear voltage steps, charge-level LEDs, USB-C.
  • Cons: voltage steps instead of a wattage readout, side fill takes practice, coil range narrower than the GTX line.
  • Buy if: you want a light pen with the fewest refills in this group.
  • Skip if: you want a screen, printed wattage per coil, or a top-fill tank.

Aspire Flexus Q Pod System

The Flexus Q is a small metal-bodied pod kit with a 700mAh battery and a 2ml bottom-fill pod. It fires by button or by draw, adjusts through three power levels marked high, medium and low by indicator color, and takes Aspire AF mesh coils, with a 0.6 ohm and a 1.0 ohm coil both packed in the box.

Aspire places the output range at 12 to 18 watts: the 0.6 ohm coil is listed at 15 to 18W for a semi-restricted draw and the 1.0 ohm coil at 12 to 15W for mouth-to-lung draws. An airflow slider sets draw resistance. The headline figure is charging: Aspire states the USB-C port brings the battery to 80 percent in about 10 minutes, a maker figure printed on the page. The AF coils are shared across the Flexus range and the Riil X, which widens the supply of spares, but the pods are device-specific, so a Flexus Q pod fits this device only. The box holds the device, one pod, both coils, a USB Type-C cable and the manual.

  • Pros: two coils in the box, dual firing, adjustable airflow, fast maker-stated charging.
  • Cons: 700mAh battery, one pod in the box, bottom fill.
  • Buy if: you want a pocket pod kit and can charge often in short bursts.
  • Skip if: you want a full day or more per charge, or a second pod included.

OXVA Artio Kit

The Artio is the simplest kit in this group: a 550mAh built-in battery, a maximum output of 15W, and no buttons or settings at all, since the device fires when the user draws on the mouthpiece. The box holds two refillable 2ml pods with mesh coils built in, so a spent coil means replacing the whole pod.

Refilling is done by lifting the rubber stopper at the base of the pod. The listing page suggests pairing the pods with 50/50 e-liquid blends such as nic salts, in the seller’s own wording. Five colors are listed. What the page does not print matters as much as what it does: there is no coil resistance figure for the pods, no charging rate, and no dimension or weight line, so a buyer who wants those numbers confirmed has to ask the seller. In exchange, this is the only kit here with a second pod in the box, which means the spare part most likely to be needed is already in hand on day one.

  • Pros: two pods in the box, no buttons or settings, tight draw by design.
  • Cons: smallest battery of the six, coil resistance and charging rate not printed, whole-pod replacement.
  • Buy if: you want the plainest possible draw-activated kit and value the spare pod.
  • Skip if: you want printed coil specs, a screen, or adjustable output.

Buying guide

Four printed figures separate these kits more than any branding does: battery capacity in mAh, pod or tank capacity in milliliters, the coil resistances in the box, and the charging port and rate. Reading those four lines on any kit page gives a fair first comparison before color or shape enters the decision.

Battery capacity and what it means on paper

The six batteries run from 550mAh to 3000mAh, and that spread is the single clearest printed difference in the group. A bigger cell pairs with lower day-to-day charging pressure, but no page here converts capacity into a guaranteed run time, and none of the six pages prints a measured test result.

Where a page does attach words to the number, the words are the maker’s: Vaporesso puts the GTX One Pro at up to three days a charge in its own figures, and the Endura T20-S listing says its battery typically lasts a full day for moderate vapers. Treat both as seller wording, and treat capacity itself as the comparable figure.

Reading the spec sheet of an MTL starting kit for smokers

A useful spec sheet answers five questions: how big is the battery, how much liquid does the tank or pod hold, which coils are in the box, which coils can be bought later, and how does it charge, in what time and over which port. Four of these six pages answer all five.

The Artio page leaves coil resistance and charging unprinted, and the GTX One Pro page leaves tank capacity unprinted. A gap is not a reason to drop a kit, but it is a reason to ask the seller before paying, because a figure that is not printed cannot be compared.

Pods with built-in coils versus tanks with replaceable coils

The ongoing effort of owning a kit is set by its coil format. The Artio builds the coil into the pod, so the whole pod is the spare part. The Flexus Q keeps replaceable coils inside a reusable pod. That format decides what gets set aside when a coil reaches the end of its run.

The Zelos Nano, Endura T20-S, GTX One Pro and Q16 Pro Plus use tanks or a clearomizer with replaceable coils, and each of the four includes a second coil in the box. None of these formats is printed as cheaper or longer lasting by the makers here; the real difference is which spare part you will be buying, and whether it is stocked where you shop.

Airflow and draw adjustment

Draw tightness is adjusted three ways in this group. The GTX One Pro takes air in at the top of the tank through an airflow ring, the Zelos Nano and Q16 Pro Plus adjust at the base, and the Flexus Q uses a slider on the device. Each design puts the control in a different place on the kit.

The Endura T20-S page describes no airflow adjustment, and the Artio has no settings of any kind. A smoker used to a firm draw should look for the kits whose pages print the adjustment and the coil resistances that go with it, since the 1.2 to 1.8 ohm coils in these boxes are the ones their makers rate for the tightest draws.

Charging ports and printed charge rates

Five of the six kits charge over USB-C and one, the Endura T20-S, uses Micro USB at a printed 5V/0.5A. Printed rates vary: the Zelos Nano lists Type-C at 1A, the GTX One Pro lists USB-C at 5V/2A, and Aspire states the Flexus Q reaches 80 percent charge in about 10 minutes over USB-C.

The Q16 Pro Plus lists USB-C without a rate, and the Artio page prints no charging figure at all. If a kit will live in a car or a work bag, the port type decides which cable has to travel with it.

FAQ

Most questions about a first MTL kit come back to the same printed details: what the box holds, which liquid ratio the coils expect, how the device charges and which part wears out. The answers below use only the figures and contents lists printed on the six product pages covered in this guide.

What comes in the box of an MTL starting kit for smokers?

Every kit here includes the device and its tank or pod, and five of the six include two coils. The Artio is the exception in form rather than count: it includes two pods with coils built in. A charging cable and a user manual are listed in the contents of five of the six boxes as well.

The GTX One Pro adds the longest extras list, with a spare glass tube, a straight spare drip tip, O-rings and a refilling plug. The Zelos Nano adds spare glass and O-rings, the Endura T20-S adds a spare drip tip, and the Flexus Q keeps the box to the device, one pod, two coils, a cable and the manual.

Which coil in the box gives the tighter draw?

In each box, the higher resistance coil is the one its maker rates for the tighter, lower-wattage draw. That means the 1.8 ohm BVC coil in the Zelos Nano box, the 1.6 ohm coil in the Q16 Pro Plus box, the 1.5 ohm spare in the Endura T20-S box, the 1.2 ohm coil in the GTX One Pro box and the 1.0 ohm coil in the Flexus Q box.

The printed wattage bands follow the same pattern, running from 8 to 12W for the GTX 1.2 ohm coil up to 13 to 15W for the Zelos 1.0 ohm mesh coil. The Artio prints no coil resistance, so no such comparison can be made for its pods.

Can these kits use nicotine salt liquid?

Two pages speak to liquid choice directly. The Artio listing suggests 50/50 blends such as nic salts for its pods, and the Q16 Pro Plus listing ties its 1.2 ohm coil to liquids at 50 percent VG or less. Both notes come from the seller side of those pages.

The Zelos Nano listing goes the other way and describes the kit as compatible only with 70VG/30PG liquid. No page opened for this guide recommends a nicotine strength, and strength is printed on liquid bottles rather than on hardware pages, so it sits outside this comparison entirely.

How long does the battery last between charges?

Only two pages attach a run-time statement to a battery, and both are maker or seller wording. Vaporesso puts the 3000mAh GTX One Pro battery at up to three days a charge in its own figures, and the Endura T20-S listing says the 1500mAh battery typically lasts a full day for moderate vapers.

The other four pages print capacity and nothing more. Actual run time depends on the coil fitted and how often the device is used, and no page here prints a test result, so capacity in mAh remains the only figure that can be compared across all six.

What wears out, and how long should a new coil sit before use?

The wearing part is the coil, or the whole pod on the Artio, where the coil is built into the pod. Two of the six pages print a waiting time to observe after fitting a new coil: the Q16 Pro Plus listing recommends waiting 10 minutes for the new coil to absorb liquid before the first draw is taken.

The Flexus Q page advises letting a newly coiled pod stand five to ten minutes before the first draw, and the GTX One Pro page gives a five minute soak in its coil-change steps. Those waits are the only preparation step any of the six pages asks for.

Conclusion

On the printed figures, the GTX One Pro is the most adjustable and longest-running kit here, the Q16 Pro Plus holds the most liquid, and the Artio is the plainest starting point. Pick by battery size, coil resistances in the box and charging port, and confirm each figure on the product page before ordering.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.