Updated Nov 16, 2026· 13 min read

Key takeaways

  • Compare six digital mixers with ethernet on published specs: AES50, AVB, SLink, and RJ45 control ports, stagebox expansion, channel counts, and network limits.

On a digital console, the network port decides how far the mixer reaches past its own surface. This guide compares digital mixers with ethernet whose makers state the port on the product page, from dual AES50 audio networking to one RJ45 control jack, so stageboxes and remote control can be planned on published figures.

Quick verdict

All six consoles here carry at least one Ethernet-class port, but they split into two camps. The Behringer X32, Midas M32R LIVE, Allen & Heath SQ-5, and PreSonus StudioLive 32SX move audio over the network to stageboxes and personal mixers, while the Soundcraft Si Impact and Mackie DL32S use Ethernet mainly for control and system links.

Choose the X32 for the deepest networking toolkit at the surface, the M32R LIVE for the same architecture in a rack-size frame with SD recording, and the SQ-5 for 96 kHz processing with the widest expander family. The 32SX is the AVB pick with Milan support, the Si Impact is the stagebox-expansion pick, and the DL32S is the pick when the console itself should sit on stage.

Product Channels Ethernet / network ports Network role Best for Main limit
Behringer X32 40 input, 25 bus Ethernet control port, 2x AES50, ULTRANET Audio, control, personal monitoring Full networking toolkit No Dante without an expansion card
Midas M32R LIVE 40 input, 25 bus RJ45 control, 2x AES50, ULTRANET Audio, control, personal monitoring Compact networked console 16 local mic preamps
Allen & Heath SQ-5 48 SLink EtherCON, 64×64 card port Audio and expansion 96 kHz systems, expanders Dante and Waves need a card
PreSonus StudioLive 32SX 40 AVB on locking XLR Ethernet, RJ45 control Audio, control, Milan AVB ecosystems Dante only via the AVB-D16 bridge
Soundcraft Si Impact 40, up to 80 to mix HiQnet Ethernet port, card slots Control and system integration Stagebox growth to 96 preamps Stageboxes run over MADI, not Ethernet audio
Mackie DL32S 32 RJ45 Ethernet, built-in Wi-Fi Control Stagebox-format mixing No networked audio expansion

How we selected

Selection started from the keyword itself: a digital mixer whose own published product page states an Ethernet or network port. Consoles that reach a network only through an unnamed expansion promise were left out; the port, or the networking connection, had to be named in the maker’s or the listing’s own specifications for the model.

Every figure below comes from the published page for that exact model: port types, channel counts over the network, cable limits, and control options are quoted from those pages, and anything a page does not state is left out rather than filled in. Where two opened pages covered one model, the manufacturer’s page decided the core figures.

Six digital mixers with ethernet, model by model

The six consoles below all state a network connection on their own product pages, but the port does different work in each design. Four of them send multichannel audio down the cable to stageboxes and personal mixers. Two of them keep audio local and use the network for control, integration, and remote operation from another seat in the room.

Behringer X32

The X32 is the benchmark for networked mixing at this level: a 40-input, 25-bus digital console with 32 programmable MIDAS-designed preamps, 25 motorized 100 mm faders, 29 LCD scribble strips, and a 7-inch TFT display. Preamp gain is programmable across a 72 dB range in 0.5 dB steps, and the converters state a dynamic range of 114 dB.

Networking is where the console earns its place here. An Ethernet port provides native control, so a computer, iPad, or iPhone can run the console over a wired or wireless network. Two AES50 ports carry 48 bidirectional audio channels each at 48 kHz over etherCON-terminated shielded CAT5 cable, up to 100 meters, feeding remote stage boxes or sharing signals with other X32 consoles. An ULTRANET port sends a 16-channel digital mix to P16 personal monitor mixers.

Around the network sits the rest of the system: 8 DCA groups, 100 scenes and 100 snippets under a 500-entry cue list, a 100-band real-time analyzer, and 8 true-stereo FX engines with more than 50 plug-in effects. A 32×32 USB 2.0 connection records to a computer at 44.1 or 48 kHz, and an expansion port accepts cards for USB, ADAT, MADI, and Dante protocols.

  • Pros: audio, control, and personal monitoring all run over network cable; 96 AES50 channels; deep scene system
  • Cons: Dante requires an expansion card; dimensions and weight are not published in the opened copy
  • Buy if: one console should anchor stageboxes, monitors, and remote control
  • Skip if: your building already runs a Dante network end to end

Midas M32R LIVE

The M32R LIVE packs the same networking architecture into a rack-mountable frame. Sixteen Midas PRO preamps with per-input switchable phantom power take the local inputs, and the console processes 40 input channels across 25 mix buses, with 17 touch-sensitive motor faders and a 5-inch color display on the surface.

The rear panel carries a dedicated RJ45 Ethernet port for remote control, two AES50 etherCON ports that handle as many as 96 channels each way over Ethernet cable to stage boxes such as the DL16, and an ULTRANET port for a P16 personal monitoring system, though that port supplies no power. Six-band parametric EQ, 8 DCA groups, and 8 true-stereo or 16 mono effects engines cover the processing.

Recording is built into the frame: the fitted DN32-LIVE card links a computer over USB 2.0 for up to 32 channels each way, and two SD card slots record up to 32 channels while you mix, with two 32 GB cards holding up to 200 minutes at 32 channels and 44.1 kHz. Show automation stores 100 scenes, 500 cues, and 100 snippets. The maker lists latency of 0.8 ms inside the console and 1.1 ms through a stagebox, dimensions of 47.8 x 61.7 x 20.8 cm, and a weight of 14.3 kg.

  • Pros: full AES50 networking plus a separate control port in a compact frame; multitrack SD recording onboard
  • Cons: 16 local preamps, so larger shows depend on stage boxes; ULTRANET port supplies no power
  • Buy if: you want Midas networking and recording in a rack-size console
  • Skip if: you need 32 local mic inputs without extra boxes

Allen & Heath SQ-5

The SQ-5 is the 96 kHz entry in this group: a 48-channel digital mixer built on XCVI FPGA processing, with 16+1 motorized faders working across 6 layers for 96 assignable strips, 16+1 onboard preamps, a 7-inch capacitive touchscreen, and 8 assignable SoftKeys. It fits a 19-inch rack.

Its network connection is the SLink port, an EtherCON connection for remote audio that speaks dSnake, ME, DX, or GigaACE/GX protocols at 128×128 channels and expands the console to a total of 48 mic inputs through the Everything I/O expander family. The ME personal mixing system runs from the same port. A separate 64×64 I/O port accepts audio networking cards for Dante, Waves, MADI, or a second SLink connection.

Processing runs deep: every input carries a high-pass filter, a gate, a 4-band parametric EQ with RTA, and a Peak/RMS compressor, while mixes carry parametric EQ, a 28-band graphic EQ, and compression. Eight stereo FX engines have dedicated returns, two 24-channel automatic mic mixers can combine into one 48-channel unit, and 300 scenes store each show. A 32×32 USB interface at 96 kHz handles multitrack work, and SQ-Drive records to a USB drive without a computer.

  • Pros: 96 kHz processing; one port covers expanders and personal mixers; networking cards for three major protocols
  • Cons: Dante, Waves, and MADI all require an optional card; dimensions and weight are not published on the opened pages
  • Buy if: you plan to grow with stage boxes inside the Allen & Heath ecosystem
  • Skip if: you want Dante built in from day one

PreSonus StudioLive 32SX

The 32SX is the AVB console in this group: a 40-channel digital mixer in a compact chassis with 25 touch-sensitive motorized faders. Thirty-two XMAX-R recallable preamps cover the local inputs, 16 mix outputs sit onboard, and a split-fader workflow runs 32 inputs across two layers with eight faders held for mix outputs.

Networking is AVB, and it is stated in hardware terms on the maker’s page: AVB audio network ports on locking XLR Ethernet connectors, plus a separate RJ-45 network control port. The built-in AVB network carries 64 channels each way to NSB-series stage boxes, EarMix 16M personal monitor mixers, and other StudioLive consoles, all over Ethernet cable. A firmware update adds Milan certification, and an optional AVB-D16 bridge adds 16 channels of Dante.

The dual-core FLEX DSP engine powers 286 simultaneous processors, with Fat Channel processing on every input and output. Routing runs through 16 FlexMixes that can each be an aux, a subgroup, or a matrix mix, plus 4 FX mixes, 4 subgroups, and 24 DCAs. A 128-channel USB interface and an onboard SD multitrack recorder with Virtual Soundcheck cover recording. The maker lists 115 dB converter dynamic range, 1.9 ms total system latency, dimensions of 659.81 x 583.84 x 165.36 mm, and a weight of 13.61 kg.

  • Pros: AVB audio and a separate control port; Milan support; FlexMix routing adapts to each show
  • Cons: Dante only through the optional bridge; the maker’s store showed the model out of stock at research time
  • Buy if: your stage boxes and monitor mixers will live in the StudioLive ecosystem
  • Skip if: you need native Dante without a bridge

Soundcraft Si Impact

The Si Impact takes a different route to the network. Its HiQnet Ethernet port, named in the maker’s user guide, handles system integration and the ViSi Remote control system, while audio expansion runs over the fitted 64×64 MADI-USB card and Cat 5 MADI connections to Soundcraft stageboxes.

The console itself mixes 40 DSP input channels from 32 mic inputs and 8 combo line inputs, and firmware 2.0 raises the count to 80 channels to mix by combining onboard, USB, and stagebox sources. Stagebox growth is the headline: Mini Stagebox units extend the system to as many as 96 mic preamps and 136 total inputs. A 32×32 option card slot accepts ViSi Connect cards, including a Dante card with 64 channels of network audio.

The surface carries 26 motorized faders with FaderGlow illumination across 4 layers, a 5-inch touchscreen, and per-channel LCD scribble strips. Each input has 4-band fully parametric EQ and dbx dynamics, all 31 output buses carry BSS graphic EQ, and four Lexicon FX engines run on dedicated buses. Eight VCAs and 8 mute groups manage larger shows. The maker’s figures list dimensions of 160 x 750 x 500 mm and a weight of 20 kg, the heaviest console here.

  • Pros: Ethernet control and integration port; stagebox growth to 96 preamps; graphic EQ on every bus
  • Cons: networked audio beyond MADI needs an option card; the heaviest console in this group
  • Buy if: the rig will grow through Soundcraft stageboxes over time
  • Skip if: audio over Ethernet is the whole point of the purchase

Mackie DL32S

The DL32S removes the surface entirely. It is a 32-channel digital mixer in a stagebox frame, with 32 Onyx+ recallable preamps split between 16 XLR and 16 combo XLR/TRS inputs, 10 XLR outputs for the main mix and eight auxes, and rack ears in the box. Every control lives in the Master Fader app on iOS, Android, macOS, or Windows.

The network connection is therefore the console’s front door. Built-in Wi-Fi works as an access point or joins an existing network as a client, connecting up to 20 control devices. Beside it, an RJ-45 Ethernet port gives a hardwired connection to a network or to an external router when the room’s wireless is crowded or the run is long. That wired option is what earns the DL32S its place in an Ethernet roundup.

Processing is complete despite the small frame: 4-band parametric EQ, high-pass filter, gate, and compressor per input; 4-band EQ, filters, a 31-band graphic EQ, a compressor/limiter, and up to 337.8 ms of alignment delay per output; four stereo FX processors with 70 presets; 6 VCAs and 6 mute groups; and snapshot recall. Conversion is 24-bit at 48 kHz. The frame measures 17.6 x 7.3 x 5.8 inches and weighs 8.8 lb.

  • Pros: wired Ethernet control beside built-in Wi-Fi; the whole console rides in one small rack box
  • Cons: no physical surface at all; no networked audio expansion; the listing page conflicts on USB channel count
  • Buy if: the mixer should live on stage and be run from a tablet
  • Skip if: you want faders under your hands or audio over the network

Buying guide

Ethernet on a mixer spec sheet can mean three different jobs: moving audio, carrying control, or feeding personal monitors. Consoles here do one, two, or all three, and the difference decides what your cable run actually accomplishes. The points below sort the jobs before the brands, so the port list on any console can be read at a glance.

How to compare digital mixers with ethernet ports

Start by naming the job each port does. On the X32 and M32R LIVE, AES50 ports move audio, a separate connection handles control, and ULTRANET feeds personal monitors. On the SQ-5, one SLink port covers audio expansion and personal mixing. On the DL32S, the single RJ45 port is control only. The job matters more than the connector count.

Audio networking protocols are not interchangeable

AES50, AVB, SLink, and Dante are separate systems that do not talk to each other directly. A stagebox bought for one console family will not serve another, however similar the cables look on the outside. The protocols differ in licensing and hardware, not in the shape of the plug.

Bridges exist, such as the PreSonus AVB-D16 for Dante, and card slots accept other protocols, but each bridge adds a box and a limit. Pick the protocol your stageboxes, monitor mixers, and building wiring already speak.

Cable type and run length

Most of these systems run on shielded Cat5e cable with locking EtherCON or XLR-style connectors, and the published runs cluster around 100 meters. The X32 states that figure for its AES50 links. Unshielded cable and longer runs invite dropouts that no console setting can fix, so the cable is part of the purchase, not an accessory to settle later.

Control ports and wireless routers

A dedicated control port keeps remote traffic off the audio network. The M32R LIVE and the 32SX both separate the two, which keeps an iPad session from sharing a path with stagebox audio during a show. It is one of the quiet marks of a system designed for larger shows.

Where one port does everything, a small router or switch joins the plan. Wireless control then runs through that router while the audio cable stays a direct, point-to-point link.

Expansion cards and future protocols

Card slots are the hedge against a changing building. The X32 accepts cards for Dante, MADI, ADAT, and USB; the SQ-5 takes Dante, Waves, MADI, or a second SLink; the Si Impact takes the ViSi Connect family. If your venue plans a Dante installation later, a console with the right slot avoids replacing the desk when the network arrives.

FAQ

Questions about networked consoles tend to circle the same ground: what the cable carries, which boxes connect, and how control stays apart from audio. The answers below stick to what these six makers publish about their ports, protocols, and published limits for each system.

Do digital mixers with ethernet need a special switch?

Most audio links here are point-to-point and need no switch at all: the AES50 runs on the X32 and M32R LIVE, the SLink run on the SQ-5, and the MADI runs on the Si Impact all connect console to stagebox directly. AVB systems are the exception, since AVB traffic expects AVB-capable switches when a network grows beyond direct links.

Can I use a regular network cable from the building?

The makers specify shielded Cat5e cable with locking connectors for their audio links, and the X32’s published limit is 100 meters per run. A building’s unshielded patch cable may pass audio in a quiet room and fail beside lighting dimmers on a show night.

Control connections are more forgiving; the DL32S and the control ports here accept ordinary network connections to a router. Keep the two cable jobs separate in your planning and in the rack.

What is the difference between AES50, AVB, and Dante?

All three move multichannel audio over Ethernet-style cabling, but they are separate protocols with separate stageboxes. AES50 is the KLARK TEKNIK system used by Behringer and Midas consoles. Dante is Audinate’s system, reached on these consoles through cards or a bridge.

AVB is an open standard family used by PreSonus here, with Milan as its deterministic profile. Each system has its own stageboxes and switches, so the protocol choice is also a hardware-family choice.

Does Ethernet control replace the mixing surface?

Only on the DL32S, which has no surface and is run entirely from the Master Fader app. On the other five, network control is a second seat: an engineer can walk the room with a tablet while the surface stays at front of house. The console keeps working if the tablet disconnects, which is the right failure mode for a live show.

Can personal monitor mixers run over the same network?

On several of these, yes, each in its own system. The X32 and M32R LIVE feed P16 personal mixers over ULTRANET, the SQ-5 feeds the ME system from its SLink port, and the 32SX feeds EarMix 16M units over AVB. Each personal mixer must match its console family; the protocols do not cross between brands.

Conclusion

For a complete networked system from one desk, the Behringer X32 remains the reference: AES50 audio, Ethernet control, and personal monitoring in one surface. The Midas M32R LIVE is the compact version of that idea with SD recording, the SQ-5 is the 96 kHz growth pick, and the PreSonus 32SX is the AVB and Milan pick.

Every console in this guide states its network connection in its own published specifications, so the real differences are visible before you buy: which protocol the port speaks, what travels over it, and how far the cable can run. Match those three points to your stageboxes and your building, and the choice makes itself.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.