Key takeaways
- Compare the best filters for your furnace by size, MERV rating and depth. Six verified picks, from 1-inch pleated filters to deep media filters, for most homes.
A furnace filter only works when it matches the slot it slides into, the rating your system can carry and a change schedule you will keep. This guide compares six verified best filters for your furnace across sizes, MERV ratings and depths, so you can pick one that fits your system instead of guessing at the shelf.
Quick verdict
If your slot takes a 1-inch filter, start with the Filtrete 20x30x1 MPR 1900 or the Filterbuy 20x30x1 MERV 11 and match the MERV rating to what your system manual allows. If you have a media cabinet, the AprilAire 213 or the Lennox X6675 gives you a longer interval between changes. Size comes first in every case.
Measure first, then choose MERV, then choose depth. A filter that does not fit the slot lets air pass around it, and a rating your blower cannot carry can cut airflow. The six picks below cover sizes from a small 12x20x1 to a deep 20x25x5 media filter, so most homes will find a match here.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Filtrete 20x30x1 MPR 1900 MERV 13 | 1-inch pleated electrostatic | Large 1-inch slots that allow MERV 13 | MERV 13, MPR 1900, pack of 2 | 1-inch depth loads faster than media filters |
| AprilAire 213 MERV 13 | 4-inch media | AprilAire air cleaner cabinets | 20x25x4, 12-month interval, 28 square feet of media | Fits listed AprilAire cabinets only |
| Filterbuy 20x30x1 MERV 8 | 1-inch pleated synthetic | Basic dust capture with easy airflow | MERV 8, traps 90% of dust particles | Lowest capture of the six |
| Lennox X6675 MERV 16 | 5-inch media, carbon fiber | Lennox, Honeywell and Carrier media cabinets | MERV 16, actual size 24.8 x 19.8 x 4.3 inches | Needs a 5-inch media cabinet |
| Filtrete 12x20x1 MPR 1000 MERV 11 | 1-inch pleated electrostatic | Small slots in apartments and condos | MERV 11, MPR 1000 | Small face area loads faster |
| Filterbuy 20x30x1 MERV 11 | 1-inch pleated synthetic | Mid-level capture for pets and dust | MERV 11, traps 95% of dust particles | 1-inch depth, shorter interval than media |
How we selected the best filters for your furnace
We built this list from product pages we opened and read, starting with maker and listing pages and keeping only filters with a stated size, a stated MERV rating and a stated construction. Every number in this guide comes from one of those pages, and each product below names its size, rating and depth so you can compare them on the same terms.
We looked for range first, because this keyword covers every furnace. The list spans 12x20x1 to 20x30x1 in 1-inch depth, plus 4-inch and 5-inch media filters for homes with a media cabinet. Ratings run from MERV 8 to MERV 16, and the set includes pleated electrostatic filters, pleated synthetic filters and a carbon fiber media filter. We left out any filter whose page gave no clear size or rating, and we did not reuse products from earlier guides on this topic.
Nothing here rests on hands-on use. We describe what the makers list, and where a listing is silent we say so. If your manual names a maximum MERV rating or a single size, that manual wins over any pick here.
Filters that fit common furnace systems
The six filters below are grouped by the job they do, not by brand. Two cover the large 20x30x1 slot at different ratings, one covers a small 12x20x1 slot, and two are deep media filters for cabinets. Read the size line first, then the rating, and only then the extra features.
Filtrete 20x30x1 MPR 1900 MERV 13
This is the pick for a large 1-inch slot where the system allows a MERV 13 rating. It pairs the highest rating in the 1-inch group with a 20x30x1 face, so it suits larger return openings that move more air. The maker describes it as an electrostatic pleated filter built around its 3-in-1 technology.
It fits homes that already use a 20x30x1 filter and want the strongest capture a 1-inch pleated filter in this guide offers. The maker describes it as capturing microscopic particles such as bacteria and particles that can carry viruses, plus larger particles such as mold spores and pollen, while having the highest airflow among MERV 13 filters.
The listing names a nominal size of 20x30x1, a MPR 1900 rating, a MERV 13 rating and an electrostatic pleated build, sold as a pack of 2. The maker does not state an actual size or a change interval on the page opened, so measure your slot and follow the interval printed on the box when it arrives.
- Strong point: MERV 13 capture in a standard 1-inch slot.
- Strong point: Large 20x30x1 face for bigger return openings.
- Strong point: Electrostatic pleated media from a maker with a long filter line.
- Drawback: A 1-inch filter loads faster than a deep media filter.
- Drawback: MERV 13 is not right for every blower, so check your manual first.
- Drawback: The listing gives no actual size, so fit needs a tape measure.
Buy it if your slot is 20x30x1, your manual allows MERV 13, and you want the strongest 1-inch capture in this guide.
Skip it if your system calls for a lower rating, your slot is a different size, or you would rather change a deep media filter once a year.
AprilAire 213 replacement filter MERV 13
This is the pick for homes with an AprilAire air cleaner cabinet that takes a 4-inch media filter. It trades the frequent changes of a 1-inch filter for a 12-month interval, and its deep pleats give it far more media area than a 1-inch filter. It only fits the AprilAire models the maker lists.
It fits owners of AprilAire air cleaner models 1210, 1620, 2210, 2216, 3210 and 4200, plus the 2120 and 2200 models with Upgrade Kit 1213. The maker lists dust, pollen, mold spores, bacteria, pet dander and dust mites among the particles it describes the filter as trapping as air passes through the MERV 13 media. The maker also lists a Pure Fit Promise and Self-Seal Technology that cuts air passing around the filter.
The listing gives a nominal size of 20x25x4, actual dimensions of 4 by 26.63 by 20.6 inches, a weight of 3.44 pounds, synthetic fiber pleated media, and 28 square feet of filtering media. The maker lists a recommended replacement schedule of 12 months and describes the filter life as up to 12 months, against traditional 1 to 3 month filters.
- Strong point: 12-month interval, so fewer changes across the year.
- Strong point: 28 square feet of media spreads the load across deep pleats.
- Strong point: Built for a named set of AprilAire cabinets, so fit is exact.
- Drawback: It does not fit a standard 1-inch slot or other brands of cabinets.
- Drawback: A 4-inch cabinet is required, which some homes do not have.
- Drawback: It is a single-purpose media filter, so it cannot move to a different system.
Buy it if you own a listed AprilAire cabinet and want MERV 13 capture with a 12-month change interval.
Skip it if your system has a 1-inch slot or a cabinet from another maker.
Filterbuy 20x30x1 MERV 8 dust defense
This is the pick for a home that wants basic dust capture without loading the blower. MERV 8 is the lowest rating in this guide, and that is the point: it catches everyday dust and lint while keeping airflow easy. It suits older systems and homes where the manual sets a modest rating.
It fits a 20x30x1 slot in a furnace, air conditioner or heat pump, and the maker describes it as a pleated synthetic filter for most scenarios. The maker lists its capability as trapping 90% of dust particles while guarding the system against lint, pollen, mold and dander. The listing gives an actual size of 19.63 by 29.63 by 0.75 inches and a pack of 3.
The modest rating makes it a poor match for a home that needs fine particle capture. It is also a 1-inch filter, so it needs changing more often than a deep media filter. The maker does not state a change interval on the page opened, so set a routine and inspect the filter on a regular schedule.
- Strong point: MERV 8 keeps airflow easy on modest systems.
- Strong point: Actual size is stated, so fit is easy to confirm.
- Strong point: Sold as a pack of 3, so spares are on hand.
- Drawback: Lowest capture in this guide, so fine dust passes through more readily.
- Drawback: 1-inch depth means more frequent changes than media filters.
- Drawback: No odor or carbon layer is listed for this version.
Buy it if your manual sets a modest rating, your system is older, or you want the easiest airflow in this guide.
Skip it if you want mid-level or high capture, or if pets and heavy dust call for a higher rating.
Lennox X6675 Healthy Climate carbon clean MERV 16
This is the pick for a media cabinet that takes a 20x25x5 filter and can use the highest rating in this guide. MERV 16 sits at the top of the range here, and the deep 5-inch build spreads that rating across a large pleated area. It fits Lennox, Honeywell and Carrier cabinets the listing names.
It fits Lennox Healthy Climate HCC20-28 cabinets, Honeywell F-series air cleaners, Carrier cabinets and Trion Air Bear cabinets listed on the page. The maker lists it as a Carbon Clean filter, with carbon fiber as the material and pleated construction. The listing also notes a microfiber cloth among the included components.
The listing gives a nominal size of 20x25x5, actual dimensions of 24.8 by 19.8 by 4.3 inches, a MERV 16 rating, an item weight of 5 pounds and a count of 2. The maker does not state a change interval on the page opened, so follow the interval your cabinet manual or the box gives.
- Strong point: MERV 16 is the highest rating in this guide.
- Strong point: Deep 5-inch media spreads the load across a large area.
- Strong point: Fits cabinets from several makers, not one brand alone.
- Drawback: It needs a 5-inch media cabinet and will not fit a 1-inch slot.
- Drawback: The highest rating is not right for every system, so check your manual.
- Drawback: The listing gives no change interval, so the schedule needs your manual.
Buy it if you have a listed 20x25x5 media cabinet and your system allows a MERV 16 rating.
Skip it if your slot is 1 inch deep, your cabinet is a different size, or your manual sets a lower ceiling.
Filtrete 12x20x1 MPR 1000 MERV 11
This is the pick for a small slot. At 12x20x1 it covers the compact openings found in apartments, condos and smaller systems, where a 20-inch filter will not fit at all. It still carries a MERV 11 rating, so a small slot does not mean settling for the lowest capture.
It fits homes whose old filter reads 12x20x1 and whose manual allows MERV 11. The maker describes the MPR 1000 line as an electrostatic filter built on its 3-in-1 technology, and lists microparticles such as pet dander, smoke and smog among what it captures, plus larger particles such as lint, pollen and household dust.
The listing gives a nominal size of 12x20x1, a MPR 1000 rating and a MERV 11 rating. The maker does not state an actual size or a change interval on the page opened. Comments on the listing mention fit running slightly large in some systems, so measure the slot and the old filter before ordering.
- Strong point: MERV 11 capture in a small 12x20x1 size.
- Strong point: Electrostatic pleated build from the same line as the larger sizes.
- Strong point: A real option for compact systems that other picks cannot serve.
- Drawback: Small face area loads faster than a large filter.
- Drawback: Listing comments mention fit running slightly large in some systems.
- Drawback: No actual size is stated on the page opened.
Buy it if your slot is 12x20x1, your manual allows MERV 11, and you want mid-level capture in a small filter.
Skip it if your slot is larger, or if your manual calls for a lower rating.
Filterbuy 20x30x1 MERV 11 allergen defense
This is the pick for a large 1-inch slot that needs more than basic dust capture but cannot carry MERV 13. It sits in the middle of this guide, with a MERV 11 rating that the maker aims at homes with pets and heavy dust. It shares the same 20x30x1 size as the MERV 8 pick, so the choice between them is purely about rating.
It fits a 20x30x1 slot in a furnace, air conditioner or heat pump. The maker describes it as a pleated synthetic filter with electrostatically charged media, and lists its capability as trapping 95% of dust particles while guarding the system against smoke, smog, lint, pollen, mold and dander. The listing gives an actual size of 19.63 by 29.63 by 0.75 inches and a pack of 2.
MERV 11 is a middle step: it catches more than MERV 8 and loads the blower less than MERV 13. It is still a 1-inch filter, so it needs changing more often than a deep media filter. The maker does not state a change interval on the page opened, so set a routine and inspect the filter on a regular schedule.
- Strong point: MERV 11 is a middle rating that suits many systems.
- Strong point: The maker lists 95% dust particle capture.
- Strong point: Actual size is stated, so fit is easy to confirm.
- Drawback: 1-inch depth means more frequent changes than media filters.
- Drawback: It catches less than the MERV 13 picks in this guide.
- Drawback: No carbon or odor layer is listed for this version.
Buy it if your slot is 20x30x1, you want more than basic capture, and your manual allows MERV 11.
Skip it if your manual allows MERV 13 and you want stronger capture, or if you have a media cabinet.
Buying guide
A good filter choice is a short chain of checks: size, depth, rating, then schedule. Get one link wrong and the rest does not matter, because a filter that does not fit or that your blower cannot carry will not do its job. The checks below take a few minutes and save a return.
Measure the slot before you order anything in the best filters for your furnace
Pull the old filter out and read the size printed on its frame, then measure the slot with a tape measure. The frame size and the slot size should agree, and when they do not, the slot wins. Write the numbers down before you shop, because most sizes look alike on a screen.
Check the depth as well as the face: a 1-inch slot will not take a 4-inch or 5-inch filter. Note the airflow direction on the old filter and slide the new one in the same way, arrow toward the blower.
Read nominal size against actual size
Filter sizes are nominal, which means the number on the box is a rounded label and the real filter measures slightly smaller. The Filterbuy 20x30x1 filters in this guide, for example, list an actual size of 19.63 by 29.63 by 0.75 inches. That gap is normal and lets the filter slide into the slot.
That gap is why a tape measure matters more than a label. A filter that is too large will bow or jam, while one that is too small leaves a gap where air passes around it. Keep the old filter until the new one is in place.
Pick the best filter for your furnace by MERV, not by habit
MERV is the scale makers use to rate how much of the particle load a filter catches, and a higher number means finer capture. In this guide MERV 8 lists 90% dust particle capture and MERV 11 lists 95%, which shows the step between ratings in plain terms. The right rating is the highest one your system manual allows, not the highest one sold.
Start with your furnace or air handler manual, which names the ratings the system is built to carry. An older blower may call for MERV 8 or MERV 11, while a newer system with a media cabinet may allow MERV 13 or MERV 16. A rating above the ceiling can cut airflow and strain the blower.
Depth changes how often you change the filter
Depth is the quiet factor in filter life. A 1-inch filter holds a small amount of dust before it loads, while a 4-inch or 5-inch media filter spreads the same air across far more pleated area. The AprilAire 213 lists 28 square feet of filtering media and a 12-month interval, against traditional 1 to 3 month filters.
That gap is the real reason to value a media cabinet if your home already has one. Set the next change date when you install the filter, and inspect it when the season changes, because dust load varies with use, pets and local air.
Airflow matters as much as capture
A filter does two jobs at once: it catches particles and it lets air through. A high rating that chokes airflow can leave rooms unevenly heated or cooled, and a blower that works harder than it should can wear sooner. Capture without airflow is a poor trade, and airflow without capture is the job of a screen, not a filter.
Depth is the usual fix, because a deep media filter can carry a high rating with less resistance than a thin one. That is why MERV 16 works in a 5-inch media filter. Favor the rating your manual allows and let depth do the rest.
FAQ
These are the questions that come up most often when the filter aisle offers too many sizes and ratings. Each answer points back to the size on your old filter and the rating your manual allows, because those two facts settle most choices. Start with those two facts and the rest follows.
What is the best filter for my furnace?
The best filter for your furnace is the one that matches your slot size, stays within the MERV ceiling in your manual, and fits a change schedule you will keep. For a 20x30x1 slot that allows MERV 13, the Filtrete MPR 1900 leads this guide, while the Filterbuy MERV 11 suits the same slot at a middle rating.
For a media cabinet, the AprilAire 213 suits listed AprilAire cabinets at MERV 13, and the Lennox X6675 suits listed 20x25x5 cabinets at MERV 16. Size and cabinet type decide the field before rating does.
How often should I change a furnace filter?
A 1-inch filter needs changing several times a year, while a deep media filter can run far longer between changes. The AprilAire 213 in this guide lists a 12-month interval, and the maker describes traditional 1-inch filters as 1 to 3 month filters. Your dust load decides where you fall in that range.
Pets, heavy dust and long seasons load a filter faster, so inspect it when the season changes and change it when it looks loaded. Write the install date on the frame so the next change is a fact, not a memory.
Can I use a higher MERV rating than my old filter?
You can use a higher MERV rating only if your system manual allows it. The manual names the ceiling for a reason, because the blower and ductwork are built around a range of resistance. Going above that ceiling can cut airflow, and the filter will not help if the air cannot move through it.
If your manual is missing, check the rating range on the furnace rating plate or ask the technician who services the system. Never assume a higher number is an automatic upgrade.
Does a thicker filter fit a 1-inch slot?
No, a thicker filter does not fit a 1-inch slot. A 4-inch media filter needs a 4-inch cabinet, and a 5-inch media filter needs a 5-inch cabinet, because the depth is part of the cabinet design. Forcing a thick filter into a thin slot will bow the frame and leave gaps around the edges.
With only a 1-inch slot, the fix is a cabinet change, not a thicker filter. A technician can fit a media cabinet between the return duct and the furnace. Until then, pick the best 1-inch filter your manual allows and keep a steady routine.
What size filter does my furnace take?
Your furnace takes the size printed on the frame of the filter now in the slot, and that size is the one to order. Pull the old filter out, read the three numbers on its frame, and measure the slot to confirm them. The size is usually written as length by width by depth, such as 20x30x1 or 20x25x4.
If the old filter is missing, measure the slot and check the furnace manual, which often lists the filter size. When two sizes seem close, the one that matches your tape measure is right.
Conclusion
Measure your slot, read your manual for the highest MERV rating it allows, and pick the filter in this guide that matches both. A 1-inch slot points to the Filtrete MPR 1900 or a Filterbuy pick, while a media cabinet points to the AprilAire 213 or the Lennox X6675. Fit first, rating second, and a schedule you will keep.
Write Your Review
No reviews yet. Be the first to share your experience!