Key takeaways
- Find the best 280mm water coolers for AM4 with clear specs, fit notes, and buying guidance for your next build. Compare six 280mm AIO liquid coolers today.
An AM4 build with a hot processor needs cooling that fits the case, mounts cleanly, and stays quiet under load. The best 280mm water coolers for AM4 pair a 280mm radiator with two 140mm fans, so they move more air than smaller AIO units while still fitting many mid tower cases. Check fit first, then pick the model that matches your case.
Quick verdict
Six 280mm AIO liquid coolers stand out for AM4 builds in this guide. Each one lists AM4 support in its published specs, uses a 280mm radiator with two 140mm fans, and brings a clear strength. Use the table to compare them at a glance. The picks cover thick radiators, ARGB lighting, and displays.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| ARCTIC Liquid Freezer III Pro 280 | 280mm AIO liquid cooler | Thick radiator builds | 110 CFM fans, 38 mm radiator | Needs at least 63 mm clearance |
| ARCTIC Liquid Freezer III 280 A-RGB | 280mm AIO liquid cooler | ARGB builds on AM4 | 69.90 CFM fans, VRM fan | Fan speed tops at 1900 rpm |
| ASUS ROG Strix LC II 280 ARGB | 280mm AIO liquid cooler | Aura Sync builds | 102.3 CFM fans, 380 mm tubes | Fan noise listed at 35.7 dB(A) |
| be quiet! Pure Loop 2 FX 280mm | 280mm AIO liquid cooler | Quiet builds with refill access | Pump 4000 to 5500 rpm | Radiator with fans is 52 mm deep |
| ENDORFY Navis F280 ARGB | 280mm AIO liquid cooler | Simple ARGB builds | Pump 1600 to 2600 rpm | Fan speed tops at 1800 rpm |
| NZXT Kraken Elite 280 RGB | 280mm AIO liquid cooler | LCD display builds | 69 mm IPS display, 98.61 CFM fan | Single-frame fan array limits fan swaps |
For most AM4 builds, the ARCTIC Liquid Freezer III Pro 280 is the first pick to study. The maker lists a 317 x 138 x 38 mm radiator, two P14 Pro fans with 110 CFM airflow, a pump speed of 800 to 2800 rpm, and a VRM fan that runs at 400 to 2500 rpm. That mix suits a builder who wants strong airflow and a thick radiator, as long as the case has at least 63 mm of clearance for the unit. The other picks cover lighting, quiet running, and a large display.
How we selected
Selection started from published specifications and product pages, not from hands-on use. A cooler had to list a 280mm radiator, two 140mm fans, and AMD AM4 support in the specs on a page that was opened and read. That rule kept the list honest and focused on fit.
The shortlist favors models with clear, complete spec tables. Radiator size, fan size, fan speed, airflow, pump speed, tube length, cold plate material, and warranty length all helped separate the picks.
Availability also mattered. A model was left out when an opened page said it was discontinued, sold out, or out of stock.
Best 280mm water coolers for AM4
The six coolers below all list AM4 support and a 280mm radiator in their published specs. Compare radiator size, fan speed, pump speed, tube length, and lighting, then match the pick to your case, your motherboard, and your noise goals. Start with the table, then read each pick in full.
ARCTIC Liquid Freezer III Pro 280
The ARCTIC Liquid Freezer III Pro 280 suits a builder who wants a thick radiator and strong fans. The maker lists a 38 mm radiator, two P14 Pro fans, and a separate VRM fan, so it reads as a performance pick first and a lighting pick second. It is a strong first pick for many builds.
This cooler is for an AM4 owner who runs long gaming sessions or heavy work loads and wants headroom in the cooling system. The maker lists two P14 Pro fans with a speed of 400 to 2500 rpm, airflow of 110 CFM, and static pressure of 5.2 mmH2O. The pump runs at 800 to 2800 rpm, and the VRM fan runs at 400 to 2500 rpm.
The maker lists a radiator of 317 x 138 x 38 mm in aluminum, a copper cold plate with micro skived fins, and a tube length of 450 mm with an outer diameter of 12.4 mm and an inner diameter of 6.0 mm. The unit weighs 1905 g, includes MX-6 thermal paste in a 0.8 g amount, and carries a 6 year warranty.
The main limit is size. The maker states that the Liquid Freezer needs at least 63 mm of clearance for installation, and it warns that some motherboards may not fit because of oversized SSD coolers in the M.2_1 slot. Measure the mount before you commit.
- Thick 38 mm radiator with two P14 Pro fans
- 110 CFM airflow and 5.2 mmH2O static pressure
- VRM fan runs at 400 to 2500 rpm
- 450 mm tubes and MX-6 paste included
- 6 year warranty listed by the maker
- Needs at least 63 mm of clearance
- Some motherboards may not fit near the M.2_1 slot
- No ARGB lighting is listed for this version
Buy if you want a thick radiator, strong fans, and a VRM fan in a 280mm AIO for AM4, and your case has room for the depth. Skip if your case is tight, your motherboard has a large SSD cooler near the socket, or you want addressable RGB lighting on the fans.
ARCTIC Liquid Freezer III 280 A-RGB
The ARCTIC Liquid Freezer III 280 A-RGB suits an AM4 builder who wants the same 280mm layout with addressable RGB lighting. It keeps the VRM fan and the thick radiator, while adding 12 A-RGB LEDs and two P14 PWM PST A-RGB fans. The lighting adds style without a new mount.
This cooler is for a builder who wants a clean look with light on the fans and the pump, without giving up the VRM fan. The maker lists two P14 PWM PST A-RGB fans with a speed of 200 to 1900 rpm, airflow of 69.90 CFM, and static pressure of 2.0 mmH2O. The pump runs at 800 to 2800 rpm, and the VRM fan runs at 400 to 2500 rpm.
The maker lists a radiator of 317 x 138 x 38 mm in aluminum, a copper cold plate with micro skived fins, and a tube length of 450 mm with an outer diameter of 12.4 mm and an inner diameter of 6.0 mm. The unit weighs 1765 g, includes MX-6 thermal paste in a 0.8 g amount, and carries a 6 year warranty.
The main limit is fan speed. The top fan speed of 1900 rpm is lower than the 2500 rpm top speed of the Pro version, and the airflow of 69.90 CFM is lower than the 110 CFM of the Pro fans. Compare the two ARCTIC models side by side before choosing.
- 280mm radiator with two A-RGB fans
- VRM fan runs at 400 to 2500 rpm
- 12 A-RGB LEDs on the unit
- 450 mm tubes and MX-6 paste included
- 6 year warranty listed by the maker
- Fan speed tops at 1900 rpm
- Airflow is lower than the Pro version
- Radiator is 38 mm thick, so check case depth
Buy if you want ARGB lighting, a VRM fan, and a 280mm radiator for AM4 in one unit. Skip if you want the highest fan speed in the ARCTIC range, or if your case cannot take a 38 mm thick radiator with fans fitted.
ASUS ROG Strix LC II 280 ARGB
The ASUS ROG Strix LC II 280 ARGB suits an AM4 builder who already uses Aura Sync lighting. It pairs a 7th gen Asetek pump with two ROG 140 mm ARGB fans and a copper cold plate, in a slim 30 mm radiator. The slim radiator helps in cases with tight top mounts.
This cooler is for a builder who wants a ROG look and simple lighting control through Aura Sync. The maker lists two ROG STRIX FAN MODEL 14 ARGB fans with a speed of 700 to 2100 RPM, airflow of 102.3 CFM, static pressure of 3.1 mmH2O, and noise of 35.7 dB(A). The pump is a 7th gen Asetek pump with a motor speed of 800 to 2800 rpm.
The maker lists a radiator of 143 x 315 x 30 mm in aluminum, a water block of 80 x 80 x 45 mm with a copper plate, and a tube length of 380 mm in sleeved rubber. Each fan measures 140 x 140 x 25.5 mm, and the control mode is PWM and DC.
The main limit is tube length. At 380 mm, the tubes are shorter than the 450 mm tubes on the ARCTIC models and the 400 mm tubes on several other picks here. A large case with a front mount far from the socket needs a careful check of the tube run before you order.
- 102.3 CFM airflow from two 140 mm ARGB fans
- 7th gen Asetek pump at 800 to 2800 rpm
- Slim 30 mm radiator in aluminum
- Pre-applied thermal compound included
- 6 year warranty listed for this model
- Tube length is 380 mm, shorter than some rivals
- Fan noise is listed at 35.7 dB(A)
- Lighting control works best with Aura Sync gear
Buy if you want a slim radiator, strong airflow, and Aura Sync lighting for an AM4 build. Skip if your case needs long tubes for a front mount, or if you want a pump with a built-in display.
be quiet! Pure Loop 2 FX 280mm
The be quiet! Pure Loop 2 FX 280mm suits an AM4 builder who values quiet running and easy upkeep. It pairs two Light Wings 140mm PWM high-speed fans with a double decoupled pump and a filler cap for refills. The refill cap is a rare plus in this size class.
This cooler is for a builder who wants low noise first. The maker lists two Light Wings 140mm PWM high-speed fans with a top speed of 2200 RPM, and noise levels of 10.8, 22.4, and 32.8 dB(A) at 25, 50, and 100 percent fan speed. The pump runs at 4000 to 5500 rpm, uses a 4-pin PWM connector, and is double decoupled to cut vibration.
The maker lists a radiator with fans at 317 x 140 x 52 mm, a tube length of 400 mm, and a total weight of 1.29 kg. The fans have nine airflow optimized blades, the cold plate is nickel-plated, and the lighting uses a 3-pin 5V addressable connector.
The main limit is depth with fans fitted. At 52 mm from the front of the fan to the back of the radiator, this unit needs more room than a slim 27 mm radiator with the same fans. Check the mount depth first.
- Two Light Wings 140mm PWM high-speed fans
- Noise listed from 10.8 to 32.8 dB(A)
- Pump runs at 4000 to 5500 rpm
- Filler cap and coolant bottle included
- 3 year warranty listed by the maker
- Radiator with fans is 52 mm deep
- No display on the pump block
- High pump speed may need a fan curve you like
Buy if you want a quiet 280mm AIO for AM4 with a refill cap and high speed Light Wings fans. Skip if your case mount is shallow, or if you want a pump display or a slimmer radiator stack.
ENDORFY Navis F280 ARGB
The ENDORFY Navis F280 ARGB suits an AM4 builder who wants simple ARGB lighting, preinstalled fans, and a clear spec table. It lists a 280 mm radiator, two Fluctus 140 PWM ARGB fans, and a ceramic bearing pump. The included controller keeps setup simple.
This cooler is for a builder who wants an easy install with lighting that works with or without a compatible motherboard. The maker lists two preinstalled Fluctus 140 PWM ARGB fans with a speed of 250 to 1800 rpm, and a pump with a ceramic bearing that runs at 1600 to 2600 rpm with PWM control.
The maker lists a radiator of 140 x 317 x 28 mm in aluminum, and radiator dimensions with fans of 140 x 317 x 54 mm. The fan bearings are fluid dynamic bearings, the base is copper, and the hoses are about 42 cm long. The box includes Pactum PT-3 thermal paste, a mounting kit, and a user manual.
The main limit is fan speed range. The top fan speed of 1800 rpm is lower than the 2100 rpm and 2200 rpm top speeds on some other picks here. That is a fair trade for a quieter fan curve in many builds, but weigh it against the included controller and the preinstalled fans.
- Two preinstalled Fluctus 140 PWM ARGB fans
- Ceramic bearing pump at 1600 to 2600 rpm
- Nano-Reset ARGB controller included
- Pactum PT-3 thermal paste included
- 36 month warranty listed by the maker
- Fan speed tops at 1800 rpm
- Radiator with fans is 54 mm deep
- No display on the pump block
Buy if you want a simple ARGB 280mm AIO for AM4 with preinstalled fans and an included lighting controller. Skip if you want a pump display, a higher top fan speed, or a slimmer radiator and fan stack.
NZXT Kraken Elite 280 RGB
The NZXT Kraken Elite 280 RGB suits an AM4 builder who wants a large display on the pump. It pairs a 69 mm IPS display with a single-frame F280 RGB Core Fan array and the NZXT Turbine pump. The display shows system data or custom images on the pump. It is a showpiece pick.
This cooler is for a builder who wants system data or custom images on the pump, plus RGB lighting in one unit. The maker lists a 69 mm IPS display with a resolution of 640 x 640 px, a refresh rate of 60 Hz, brightness of 690 cd/m2, and 16.7 million colors.
The maker lists a radiator of 321 x 137 x 27 mm in aluminum, a pump speed of 1200 to 2800 rpm, and tubing of 400 mm in CIIR rubber with a PET braided sleeve. The included F280 RGB Core Fan is a single-frame array of two fans in one frame, measuring 280 x 140 x 26 mm, with a speed of 500 to 2000 rpm, airflow of 98.61 CFM, static pressure of 3.2 mmH2O, and noise of 34.5 dBA. The cold plate is copper, and the warranty is 6 years.
The main limit is the single-frame fan array. Because the two fans share one frame and one 8-pin connector for PWM and RGB, swapping in two separate fans later is less simple than with a cooler that ships two loose fans. Confirm the 321 mm radiator length fits your case.
- 69 mm IPS display at 640 x 640 px
- 98.61 CFM airflow from the F280 fan array
- Pump runs at 1200 to 2800 rpm
- Pre-applied thermal paste included
- 6 year warranty listed by the maker
- Single-frame fan array limits fan swaps
- Radiator is 321 mm long, so check case fit
- Display adds cables and software setup
Buy if you want a large IPS display, RGB lighting, and strong airflow in a 280mm AIO for AM4. Skip if you want two separate fans, a plain pump block, or the shortest possible install with no display software.
Buying guide for 280mm water coolers for AM4
A 280mm water cooler is only a good buy when it fits your case, your motherboard, and your fan and lighting headers. Use the checks below in order, and measure twice before you order any AIO unit. Measure your case first, then check headers and mounts.
Case fit and radiator placement
Start with the case, not the cooler. A 280mm radiator needs a mount that lists 280mm support, plus room for the radiator length, the fan depth, and the tube run to the pump. Measure length, depth, and tube clearance before ordering. Check the manual for the mount list first.
Radiator length varies in this guide from 315 mm to 321 mm, and radiator thickness varies from 27 mm to 38 mm, before fans are added. Add the fan depth to the radiator thickness to get the full stack depth, then compare that stack with the space at the top or front mount. A top mount can clash with tall memory or the top edge of the motherboard, while a front mount can clash with a long graphics card or a drive cage.
AM4 mounting and socket fit
AM4 mounting looks simple, but the bracket, the backplate, and the space around the socket still need a check. Read the socket list in the specs, then look at the parts in the box before you start the build. A flat, square seat on the processor matters most.
All six picks in this guide list AM4 support in their published specs. That is the first filter, not the last one. The ARCTIC models in this guide warn about oversized SSD coolers near the M.2_1 slot, so that area deserves a close look.
Fan speed, airflow, and noise
Fan speed, airflow, and noise move together, so read all three numbers when you compare coolers. A high top speed can help under load, but it can also add noise when the fan curve is set too high. Compare speed, airflow, and noise together, not alone.
In this guide, top fan speeds run from 1800 rpm to 2500 rpm, and listed airflow runs from 69.90 CFM to 110 CFM. Those numbers come from the makers, and each maker may measure them in a different way, so use them to sort the picks, not to rank them to a fine point. A fan with high static pressure can push air through a dense radiator more easily than a fan with high airflow alone.
Pump design and tube routing
The pump moves coolant through the loop, so its speed range, its mount, and its noise all matter. A pump that runs too fast at idle can hum, while a pump that runs too slow under load can leave heat in the block. Match the pump curve to the fan curve for best results.
Pump speeds in this guide run from 800 rpm at the low end of the ARCTIC and ASUS models to 5500 rpm at the high end of the be quiet! model. The ENDORFY pump runs at 1600 to 2600 rpm, and the NZXT Turbine pump runs at 1200 to 2800 rpm. Tube length also shapes the install. The ASUS model lists 380 mm tubes, the be quiet! and NZXT models list 400 mm tubes, and the ARCTIC models list 450 mm tubes.
Frequently asked questions
These questions cover the fit, the fan layout, and the first steps after the install. Each answer uses the specs in this guide, so you can check the numbers against the product sections above. The answers below use the specs listed in this guide. Start here if you are short on time.
Will it fit an AM4 motherboard?
Yes, when the cooler lists AM4 support and the pump block clears the parts around the socket. All six picks in this guide list AM4 in their published specs, but the board layout still needs a check. Check the socket list and the space around the socket.
AM4 support is a socket fit, not a guarantee that every board will fit. Check the space around the socket for tall heatsinks, a large M.2 cooler, and memory slots that sit close to the pump block. Measure that area before you order.
Does it need a 280mm mount in the case?
Yes. A 280mm radiator needs a case mount that supports a 280mm radiator, with room for two 140mm fans side by side and room for the full radiator length. Measure the mount area for length, depth, and tube clearance first. A short radiator mount will not take a 280mm unit.
Radiator length in this guide runs from 315 mm to 321 mm, so a mount that only fits a shorter radiator will not work. Check the case manual for the mount list, then measure the mount area for length, depth, and tube clearance.
How many fans come with each cooler?
Each cooler in this guide ships with two 140mm fans, or with one single-frame array that holds two 140mm fans in one frame. No pick in this guide ships with only one loose fan. The NZXT model uses one frame that holds two fans. Count the fans in the box list before you order.
The ARCTIC, ASUS, be quiet!, and ENDORFY models each ship with two separate 140mm fans. The NZXT Kraken Elite 280 RGB ships with one F280 RGB Core Fan, which the maker describes as a single-frame array with two fans in one frame.
What should I do first if it does not fit?
Stop the install, keep all the parts and screws together, and recheck the mount list in the case manual and the radiator size in the cooler specs. Do not force the radiator or the pump block into place. Keep the box and all screws until the fit is proven.
Compare the radiator length and the stack depth with the mount area, then check the tube run and the space around the socket. A common fix is to move the radiator from the top mount to the front mount, or to turn the radiator so the tubes sit on the other side.
Conclusion
For most AM4 builds, the ARCTIC Liquid Freezer III Pro 280 is the strongest all-round pick, with a thick radiator and strong fans. If you want lighting, pick the ARGB model that fits your case and headers, and check radiator length, tube length, and mount depth first. Measure your case and headers before you order.
Write Your Review
No reviews yet. Be the first to share your experience!