Key takeaways
- Compare the best mixers for multiple consoles, from dual USB hubs that mix a PC and console at once to control surfaces that run a whole streaming desk today.
A desk with a PC, a PlayStation and a Switch has three audio sources and usually one headset, so the best mixers for multiple consoles are the hubs that keep several machines connected at once, let you hear the right one instantly, and send a clean mix onward. Five current hubs below cover dual USB mixing and app-driven control.
Why Multi-Console Desks Need a Hub, Not a Cable Swap
Every console on the desk wants the same headset, the same microphone and, for streamers, the same broadcast mix. Without a hub, each switch of game means moving plugs, re-pairing chat and rebuilding levels, and the machine you are not playing still has something to say.
The five picks below solve that problem at three different layers. Two are dual-USB hubs that connect a computer and a console at the same time and either mix them together or switch between them from a menu. One is a streaming mixer with two independent mix buses, so what you hear and what your audience hears can differ. One is a control surface with no audio jacks of its own, which runs every source that reaches the PC, including console audio arriving through a capture device. The common thread is that nothing gets unplugged when the game changes.
Chat is the detail that separates these from plain audio switchers. Consoles handle voice chat inside their own systems, PCs handle it in apps, and a good multi-console hub keeps your microphone working on both sides of the desk. Mic inputs, phantom power, game and chat balance controls and stream mixes all appear below because they decide whether a hub fits a real desk or just a tidy one.
Yamaha ZG02: A Console Port Beside the PC Port
The ZG02 was designed for exactly this desk. Alongside its computer connection it carries a dedicated USB connection for a PlayStation 4 or 5 or a Nintendo Switch, so the PC and one console stay plugged in together and the mixer mediates between them.
Yamaha calls the ZG02 a compact mixer with a USB interface built for multiplayer gamers and game streamers. The PC side runs at 48 kHz and 24-bit over USB, the console side at 48 kHz and 16-bit, and with Yamaha’s dedicated driver installed the mixer appears to the computer as two virtual devices, one for voice and one for streaming. That split lets Discord and a streaming app such as OBS or Streamlabs each take their own feed at the same time. Physical knobs handle the three levels that matter mid-game: your voice, your team’s voices and the game sound.
The microphone side covers both habits. A front 3.5 mm input takes a headset mic, and a rear XLR and TRS combo jack with 48V phantom power takes a dedicated condenser microphone, though the two mic inputs cannot be used at the same time. Mic processing includes compression, a limiter, reverb, pitch and radio voice effects, with three effect preset buttons on the panel, two for voice and one for game sound, and a press-and-hold echo. Game sound processing includes ZG Surround, which uses Yamaha’s ViReal technology to virtualize multichannel audio from the USB input for a stereo headset, Focus Mode and EQ settings that can suppress your own character’s voice or bring out environmental sounds, and a 3D chat space that places teammates’ voices in a virtual space away from the game audio.
Outputs are a 3.5 mm phones jack and a stereo mini monitor output for speakers, with a monitor select button to move between them and a mute button on the panel. The ZG Controller app for Windows and Mac holds the deeper settings and saved customizations, and the mixer is compatible with the Elgato Stream Deck family. It runs on 5 V USB power at up to 4.5 W, measures 162 x 61 x 113 mm and weighs 0.6 kg, with one USB cable included in the box.
- Dedicated USB connection for PlayStation 4/5 or Nintendo Switch beside the PC link
- Two virtual devices on PC for separate voice and streaming feeds
- XLR/TRS combo mic input with 48V phantom power, plus a headset mic input
- ZG Surround, Focus Mode and 3D chat space processing
- Phones and speaker outputs with a select button, Stream Deck compatible
Roland BRIDGE CAST: Dual Mixes for Players Who Stream
The BRIDGE CAST approaches the multi-machine desk as a broadcast problem. Its dual audio buses build two independent mixes, a personal mix for your headphones and a stream mix for the audience, so levels can differ on each side of the glass. That split runs through everything it does.
Roland describes it as a professional audio streaming interface and mixer for online gamers, with a 32-bit hardware DSP that handles the audio processing so the computer’s resources stay with the game and the stream. The mixer independently balances the mic level, team chats, gameplay sounds and background music for you and for your viewers. Connections center on USB-C, with two USB-C ports and 2 x 2 USB connectivity, plus a 1/8-inch TRRS aux input that brings in a second device feed, a 1/8-inch TRS line output for external gaming speakers and a 1/8-inch TRRS headset connection. Conversion runs at 24-bit and 96 kHz.
The microphone channel is a high-quality XLR preamp with phantom power, built for broadcast-grade dynamic or condenser microphones, and the voice processing is deep: EQ, compression, a low-cut filter for plosives, a de-esser, a noise suppressor and reverb all run on the hardware DSP. A voice changer drawn from Roland’s VT voice transformer products adjusts pitch and formant to change the character of your voice. Game EQ presets highlight chosen frequencies, such as footsteps in a shooter, and can be saved in onboard profiles and recalled with button presses while playing.
Monitoring runs through a headphone amplifier with a high-sensitivity output, and the headset connector also supports a headset mic for a single-cable setup. Level knobs cover each output, with a dedicated streaming level control for the audience feed. The companion BRIDGE CAST app configures mic and audio parameters and Game EQ presets, reassigns hardware controls and saves configurations for different games and audiences. The unit is USB bus powered, with an optional 5V USB AC adaptor, and measures 8.7 x 2.8 x 4.3 inches at 1 pound.
- Dual audio buses: independent personal mix and stream mix
- 32-bit hardware DSP and 24-bit/96 kHz conversion
- XLR mic preamp with phantom power and full vocal processing chain
- Voice changer, Game EQ presets saved in onboard profiles
- Two USB-C ports, aux input for a second device, speaker line output
Creative Sound Blaster G8: Two USB-C Feeds, Mixed at Once
The G8 takes the most literal approach in this guide: two USB-C inputs, both live, with simultaneous audio mixing. A console and a PC, or a PC and a phone, can play into the same headset at the same time instead of taking turns. It is the only pick here built to blend two digital sources rather than select one.
Creative calls the G8 a hi-res gaming DAC and amplifier and an all-in-one hub for consoles, PCs and mobile devices. Beyond the dual USB-C inputs it adds an HDMI ARC connection that fits a TV and console setup, a line input and line output, a mic input, a TOSLINK optical output and a headset connection. Mixed audio can be cast onward to streaming software and platforms. Top-mounted controls handle the Acoustic Engine features, direct mode and source switching, so changing what you hear does not require opening the app mid-game.
Playback runs up to 32-bit and 384 kHz with a DAC dynamic range of 130 dB. The custom Xamp discrete bi-amplifier drives the left and right headphone channels individually, and the amplifier supports headphones from 8 to 600 ohms with a 1-ohm output impedance, which covers everything from earbuds to demanding studio headphones. Dolby processing is on board for surround presentation from supported sources.
The gaming tools sit in the Sound Blaster Acoustic Engine suite: a 10-band equalizer, Scout Mode, which analyzes the soundscape in real time to point up opponent locations, and CrystalVoice processing with noise reduction and acoustic echo cancellation for your microphone. GameVoice Mix balances game audio and voice chat on dedicated channels so one can be pulled down without touching the other. The Creative app manages customizable profiles, tuned presets for games and movies, speaker and headphone configurations and firmware. The unit is USB bus powered and measures 125.7 x 90.7 x 52.4 mm.
- Dual USB-C inputs with simultaneous mixing of two devices
- HDMI ARC for TV and console setups, plus line and optical connections
- 32-bit/384 kHz playback, 130 dB DAC dynamic range, Xamp bi-amplifier
- GameVoice Mix for game and chat balance on dedicated channels
- Scout Mode, CrystalVoice and a 10-band EQ in the Acoustic Engine suite
SteelSeries GameDAC Gen 2: Two Systems, One OLED Switch
The GameDAC Gen 2 keeps two systems wired and swaps between them from its OLED menu. One USB jack serves the primary console, the second takes a PC, another console or a Switch, and the headset never moves. It is the classic base-station pattern, executed with a screen instead of a toggle switch.
SteelSeries documents the Xbox version in its product guide: one cable runs from the GameDAC’s Xbox jack to an Xbox, and a second cable can run from the USB jack to a PC, PlayStation or Switch, with input sources changed through the OLED display menu. The stated system compatibility covers Xbox Series X and S, Xbox One, PC, PlayStation 5, PlayStation 4, Nintendo Switch and mobile. A headset connects by its 3.5 mm cable to the headset jack, and line-in and line-out jacks handle auxiliary sources and external feeds.
Control is a wheel and a screen. Pressing the control wheel toggles between volume and ChatMix, the game and chat balance that is available on PC with the software installed, and holding it opens the main menu. The secondary button mutes the microphone. Audio options include a software surround toggle on PC, presets or a fully adjustable 10-band EQ, a gain setting for maximum output level, sidetone so you can hear your own voice at a chosen level, and mic volume adjustment.
The line output has two personalities. Set to Speakers, it plays game and chat audio through external speakers. Set to Stream, it mixes your main, aux and mic audio together and sends the blend to a stream PC’s soundcard input, with the custom mix adjusted through the Stream Mixer on the OLED screen. That makes the GameDAC a tidy front end for a two-PC streaming desk as well as a two-console one. SteelSeries GG software, through its Engine section, sets custom EQ and mic controls on PC, and the GG suite also includes the Sonar app.
- Two USB systems connected at once, switched from the OLED menu
- Compatibility across Xbox, PlayStation, Switch, PC, Mac and mobile
- ChatMix game and chat balance on PC, plus mic mute on the unit
- Line out modes for speakers or a stream mix to a second PC
- 10-band EQ, sidetone and gain settings in the on-device menus
BEACN Mix Create: The Control Layer Above Every Source
Mix Create is the odd one out: it has no audio inputs or outputs at all. It is a USB-C control surface that commands the audio devices and applications on a computer, which makes it the hub for desks where console audio already arrives through a capture card or interface.
BEACN is direct about the design. Asked whether the unit has XLR or other inputs and outputs, the maker answers no: it chose to be USB-C only so that any gear you already own works within its software. USB mixers, interfaces, microphones and speakers connected to the computer come into the BEACN App and are controlled from the Mix Create’s four infinite scroll knobs and 5-inch LCD screen at 800 x 480. Applications are dragged and dropped onto knobs, and knob paging opens further channels beyond the four physical controls, so games, music, system sounds, video calls, browsers, headsets, interfaces and microphones all sit under the same four knobs.
Its mixing model is two completely independent mixes, a personal mix and an audience mix, adjusted with the touch of a button, so music or chat can sit at one level in your headphones and another on the stream. A routing table, combined with mute modes, controls precisely where each source goes, and a VOD output keeps selected sources such as music out of the recorded version of a stream on platforms including Twitch, Kick and YouTube. For a multi-console streamer, the practical effect is that the PlayStation feed, the Switch feed, the PC game and the chat app stop being four separate volume problems and become one panel.
The unit measures 174 x 90 x 100 mm, connects over USB 2.0 through USB-C, and ships with a 2-meter USB-C to USB-A cable. It needs Windows 10 or later, or macOS 12 or later. Because it controls rather than converts, it pairs with whatever interface or capture device a desk already uses, and BEACN notes it works with any audio hardware the computer can access, including the maker’s own Studio interface and Mic when a full BEACN setup is wanted.
- Control surface only: no audio jacks, commands devices and apps on the PC
- Two independent mixes, personal and audience, switched by button
- Four knobs with paging for an unlimited set of assigned sources
- Routing table and mute modes, plus a VOD output for recorded streams
- Works with any interface, capture device or mixer the computer can access
Side-by-Side Specs for Mixers for Multiple Consoles
The table below lines up the five hubs by the questions a multi-console desk asks first: how many machines stay connected, which consoles are named in the maker’s own documentation, and how the mix is controlled. Skim it before reading the five sections in full.
| Model | Connected at once | Console support as stated | Mix control |
| Yamaha ZG02 | PC plus one console over USB | PlayStation 4/5, Nintendo Switch | Three knobs, dual virtual devices on PC |
| Roland BRIDGE CAST | USB-C hosts plus an aux feed | Second device via aux input | Dual buses, personal and stream mixes |
| Creative Sound Blaster G8 | Two USB-C devices, mixed together | Consoles over USB-C, HDMI ARC for TV setups | GameVoice Mix, top controls, app profiles |
| SteelSeries GameDAC Gen 2 | Two USB systems, switched by menu | Xbox, PlayStation 5/4, Switch, PC, mobile | Control wheel, ChatMix, OLED stream mixer |
| BEACN Mix Create | Controls all PC-connected sources | Console audio via capture or interface | Four knobs with paging, routing table |
Mixing and switching are the fork in this table. The G8 blends two USB devices at the same time, the GameDAC Gen 2 and ZG02 keep two systems attached and choose between them, the BRIDGE CAST builds two different mixes from its sources, and Mix Create controls sources that reach the computer by other hardware. Which behavior you need decides the shortlist before any other feature is compared.
How to Choose Mixers for Multiple Consoles
Work out how your consoles reach your ears today, then buy the layer that is missing. Most desks need one of three things: simultaneous connections, separate mixes for player and audience, or one control point for sources that already reach a PC. Start with connections.
Mixing Two Sources Is Not Switching Between Them
Switching is enough when you play one machine at a time and just hate moving cables: the GameDAC Gen 2 and the ZG02 keep a console and a PC attached and hand over from a menu or a dedicated port. True mixing matters when two sources must be heard together, such as game audio from a console and chat or music from a PC or phone.
That is the G8’s dual USB-C design brief, and it is also why the BRIDGE CAST’s aux input matters: a second device can join the main feed instead of replacing it. Decide which behavior your sessions actually use before comparing anything else.
Count Your Mixes: One for You, One for the Audience
Players who stream need two balances, because the level that helps you play is rarely the level that sounds right to viewers. The BRIDGE CAST builds personal and stream mixes on dual buses, and Mix Create keeps personal and audience mixes independent in software.
The ZG02 splits voice and streaming into separate virtual devices on the PC, and the GameDAC Gen 2 can send a dedicated stream mix from its line output. If you never stream, a single well-controlled mix is simpler and every hub here can run that way. If you do stream, dual-mix support is the feature to weight first.
Check the Microphone Path on Both Sides of the Desk
Your mic has to work on the console and the PC, in game chat and in the stream. Dedicated mic inputs with phantom power, on the ZG02’s combo jack and the BRIDGE CAST’s XLR preamp, suit condenser microphones, while headset mics plug straight into the ZG02, BRIDGE CAST and GameDAC Gen 2.
Chat balance controls matter as much as the input: ChatMix on the GameDAC, GameVoice Mix on the G8 and the ZG02’s three-knob layout all exist to keep voices and game sound in proportion without opening a settings page mid-match.
Questions About Mixers for Multiple Consoles
Three questions decide most purchases in this category: whether two consoles can truly play through one headset together, how console audio reaches a streaming PC, and whether a control surface counts as a mixer at all. Each answer points at a different pick in the five above.
Can I Hear Two Consoles Through One Headset at the Same Time?
Only some of these hubs mix rather than switch. The Sound Blaster G8 mixes two USB-C devices simultaneously, so a console and a PC or phone can genuinely overlap in one headset. The ZG02 and GameDAC Gen 2 keep two systems connected and select one as the active source, which removes cable swapping but not the one-at-a-time rule.
A second console can also join as an auxiliary feed on hubs with an aux or line input, such as the BRIDGE CAST or the GameDAC’s line-in, at the cost of an analog connection. If your sessions truly need two machines audible together, simultaneous mixing is the spec to insist on.
How Does Console Audio Reach My Stream?
Three routes appear in this guide. A hub with a dedicated console USB connection, like the ZG02, can pass a streaming feed to the PC as its own virtual device. A line output set to stream mode, like the GameDAC Gen 2’s, sends a finished blend of game, aux and mic audio to a stream PC.
And where a capture card already brings console audio into the PC, a control layer such as Mix Create or a dual-bus mixer such as the BRIDGE CAST shapes what the audience hears. The right route depends on whether your console signal reaches the PC by USB, by analog line or by capture hardware.
Is a Control Surface Like Mix Create Really a Mixer?
It mixes control rather than signals, and for some desks that is the missing piece. Mix Create converts nothing: your interface, capture card or USB mixer still handles the audio, while the BEACN App and the four knobs run levels, routing and the two independent mixes from one panel.
If your problem is too many disconnected plugs, a hardware hub from the rest of this guide solves it. If your problem is too many windows, apps and devices to adjust while playing, a control surface over the gear you own is a legitimate hub, and it is the only pick here that grows by paging rather than by ports.
Conclusion
Match the hub to the desk. Players who run a PC beside one console should start with the GameDAC Gen 2 or the ZG02, the G8 suits listeners who also mix a phone and TV audio, the BRIDGE CAST fits streamers who want dual mixes and voice processing, and Mix Create ties a capture-based desk neatly together.