Key takeaways
- Six mixers for phantom power compared on full maker specs: Yamaha, Mackie, Allen and Heath, Zoom, PreSonus and Behringer desks whose pages state +48V supplies.
The best mixers for phantom power are desks whose published specifications state a +48V supply, because a condenser microphone draws its operating power from the mixer itself. This guide compares six such mixers from Yamaha, Mackie, Allen and Heath, Zoom, PreSonus and Behringer, with the phantom scope of each model spelled out in plain terms.
Quick verdict
Every mixer below states phantom power on its maker’s published specification, and the differences that matter are scope and channel count. The Yamaha MG10XU and Mackie ProFX10v3 power four preamps each, the Zoom LiveTrak L-8 powers six and records multitrack, and the Behringer Xenyx 802S covers two preamps in the smallest footprint here.
Choose the MG10XU for a metal-chassis analog desk with switchable +48V, 1-knob compressors and 192 kHz USB. Choose the ProFX10v3 if you want phantom on all channels with 100 Hz low-cut filters and a deep effects engine. Choose the ZED-10FX for swept-mid EQ and flexible USB routing, the LiveTrak L-8 for battery-powered multitrack recording, the StudioLive AR8c for an SD recorder and Bluetooth Super Channel, and the Xenyx 802S for a compact streaming desk with two powered preamps.
| Model | Mic preamps | Phantom power, as stated | USB / recording | EQ | Size and weight |
|---|---|---|---|---|---|
| Yamaha MG10XU | 4 D-PRE | +48 V, switchable | USB 24-bit/192 kHz, 2-in/2-out | 3-band on mono channels | 244 x 71 x 294 mm, 2.1 kg |
| Mackie ProFX10v3 | 4 Onyx | 48V on all channels | USB up to 192 kHz | 3-band with hard bypass | Not stated on maker page |
| Allen & Heath ZED-10FX | 4 | 48V microphone phantom power | Configurable USB stereo in/out | 3-band MusiQ, swept mid | Not stated on opened page |
| Zoom LiveTrak L-8 | 6 | +48 V, selectable | SD multitrack 24-bit/96 kHz; USB 12-in/4-out | 3-band plus 75 Hz low cut | 268 x 282 x 74 mm, 1.56 kg |
| PreSonus StudioLive AR8c | 4 XMAX | +48 VDC | USB 8×4 24-bit/96 kHz; SD recorder | 3-band analog | 280 x 90 x 313 mm, 3.2 kg |
| Behringer Xenyx 802S | 2 XENYX | 48V phantom power | USB 48 kHz/16-bit stereo | 3-band | 189 x 220 x 47 mm, 1.6 kg |
How we selected these mixers
Phantom power is a stated specification or it is nothing, so this list only includes mixers whose opened product pages name a +48V supply in their feature lists or specification tables. Each entry records the maker’s exact wording for that supply and the number of microphone preamps it feeds.
Supporting specifications, from gain range to USB format, are recorded the same way. The six span the realistic buying range for powered inputs: two preamps on the Xenyx 802S for a single condenser at a desk, four preamps on the Yamaha, Mackie, Allen & Heath and PreSonus desks for small groups, and six on the LiveTrak L-8 for panel recording. Switching scope is described only where the maker’s page states it, and models whose pages stay silent on scope are described that way rather than guessed at.
The mixers for phantom power, compared in detail
The detail sections follow a fixed order: who the mixer suits, how its phantom supply is arranged as far as the maker states it, the preamp and recording specifications around that supply, and the limits to weigh before buying. Prices are left to the product listings, and every figure quoted comes from the maker’s published material for that model.
Yamaha MG10XU: switchable +48V on a metal analog desk
The MG10XU is the pick for buyers who want a conventional analog console whose specification table states phantom power outright. Yamaha’s own shop page lists +48 V in the specifications and heads a feature section “Switchable Phantom Power & PAD Switch”, so the supply is both stated and switchable on this 10-channel desk.
The console carries four mono mic/line inputs and three stereo line inputs, with D-PRE discrete Class-A preamps on the mic channels. Around the phantom supply sit PAD switches on the mono inputs for loud sources, 1-knob compressors, 3-band EQ on the mono channels and a high-pass filter. The built-in SPX processor offers 24 programs, and the USB interface runs at 24-bit/192 kHz with two inputs and two outputs under USB Audio Class 2.0.
Outputs are XLR balanced, the chassis is metal, and the desk measures 244 x 71 x 294 mm at 2.1 kg. Cubase AI download software is included. The limit is scope: the page presents phantom as a console feature with a single switch section, so buyers who need to power one input while leaving another unpowered should read the manual’s switching diagram before ordering.
- Pros: +48 V stated in the maker’s spec table; switchable supply with PAD switches; D-PRE preamps; 192 kHz USB; metal chassis
- Cons: USB is stereo only; phantom switching scope needs the manual to confirm per-input behavior
- Buy if: you run up to four condensers on a small analog desk and record a stereo mix to a computer
- Skip if: you need multitrack USB recording or per-channel phantom switching confirmed on the product page
Mackie ProFX10v3: 48V on all channels, stated plainly
Mackie states the scope directly: the ProFX10v3 feature list includes “48-volt Phantom Power”, and the full features add “100Hz low-cut filter and 48V phantom power on all channels”. For a buyer mixing condensers with dynamic microphones on the four Onyx preamps, that all-channels wording is the clearest scope statement in this group.
The four Onyx preamps provide 60 dB of gain. The GigFX engine supplies 24 effects including reverbs, delays and choruses, USB recording runs at sample rates up to 192 kHz with a dual stereo USB return, and the 3-band EQ has an on/off hard bypass switch on all channels. Built-in compression, switchable Hi-Z inputs, a headphone output with separate level and blend control, latency-free direct monitoring and an FX mute footswitch input round out the panel.
The Waveform OEM software bundle is included. Limits: the maker’s page does not publish dimensions or weight, and USB carries the stereo mix rather than separate multitrack channels, so podcast panels wanting per-speaker tracks should look at the LiveTrak L-8 instead.
- Pros: phantom scope stated as all channels; 60 dB preamp gain; 100 Hz low-cut filters; 24 effects; 192 kHz USB
- Cons: stereo USB only; dimensions not published on the maker page
- Buy if: you want the phantom arrangement spelled out before buying and mix live sources with effects
- Skip if: you need multitrack recording or per-input phantom switches
Allen & Heath ZED-10FX: 48V with swept-mid MusiQ EQ
The ZED-10FX suits small bands and singer-songwriters who care about EQ control around their condensers. Its feature summary states “48V microphone phantom power” alongside four mic/line inputs, two of which carry Class A FET high-impedance guitar inputs with a 26 dB boost switch for quiet pickups.
The EQ is a 3-band MusiQ design with a swept mid, which gives a condenser vocal channel more shaping than fixed-band desks here. Sixteen ZED-FX time-delay effects are built in, fed by a dedicated FX send alongside one pre-fade aux send. USB audio is configurable: sends can carry the main mix, the aux and FX buses, or a separate record bus, and returns land on the playback input or the Stereo 2 channel.
Main outputs are XLR with inserts, joined by stereo monitor outs, separate 2-track record outputs and a stereo playback input. The opened page does not state the USB bit depth or the desk’s dimensions, so those figures are omitted here rather than borrowed from other listings; buyers comparing USB formats should weigh the stated routing flexibility instead.
- Pros: 48V phantom stated in the feature summary; swept-mid EQ; guitar DI inputs with boost; flexible USB send and return routing
- Cons: USB format figures not stated on the opened page; effects are time-delay types only
- Buy if: EQ shaping and routing flexibility matter more than recording resolution figures
- Skip if: you need a stated high-resolution USB specification or multitrack capture
Zoom LiveTrak L-8: six powered preamps and multitrack recording
The LiveTrak L-8 is the panel-recording pick: six microphone preamps with selectable phantom power, stated as +48 V in its specification table, feeding a mixer that records up to 12 tracks at once. For podcasts or demos where every speaker uses a condenser, it offers the widest powered-input count in this group.
The preamps show an equivalent input noise of -121 dBu or less and gain from +10 to +54 dB. Channels 1 and 2 accept Hi-Z instruments, channels 3 to 6 carry -26 dB pads, and each channel has 3-band EQ (10 kHz, 2.5 kHz, 100 Hz) plus a 75 Hz low cut. Recording goes to SD card at up to 24-bit/96 kHz, or over USB as a 12-in/4-out interface at 24-bit/48 kHz.
Four headphone outputs carry three custom monitor mixes plus the main mix, six sound pads trigger clips, and a TRRS phone connection with mix-minus handles call-in guests. Power options include four AA batteries, rated at about 2 hours on alkaline, 3.5 hours on NiMH and 6.5 hours on lithium cells, or USB bus power. The unit measures 268 x 282 x 74 mm and weighs 1.56 kg, at 5 W power consumption.
- Pros: six preamps with +48 V stated; multitrack SD and USB recording; battery operation; four headphone outputs
- Cons: one shared supply arrangement rather than per-channel switches; effects and EQ are unavailable at 96 kHz recording
- Buy if: you record panels or bands with several condensers and want separate tracks without a computer
- Skip if: you need per-input phantom switching or a purely analog signal path
PreSonus StudioLive AR8c: +48 VDC with an SD recorder aboard
The StudioLive AR8c is a hybrid desk for musicians and podcasters who record as they mix. PreSonus states “Phantom Power +48 VDC” in the product specifications for its four balanced microphone inputs with Class A XMAX preamps, and the maker’s detailed table describes the supply as a single global +48V feed.
The preamps offer gain from +12 to +55 dB with equivalent input noise under 128 dBu. The USB interface records eight inputs and four returns at 24-bit/96 kHz over a USB-C connection, capturing every channel plus the main mix, while a built-in 2×2 SD recorder captures the main mix to cards up to 32 GB. The stereo Super Channel adds Bluetooth, RCA and 1/8-inch inputs with switchable SD/USB playback, and a stereo effects processor holds 16 presets.
Channel processing includes a musical 3-band analog EQ and mic/line boost for low-level sources. Headphone output reaches 150 mW per channel into 60 ohms, XLR outputs peak at +24 dBu, and the desk measures 280 x 90 x 313 mm at 3.2 kg. Capture software and a Fender Studio Pro license are included. The trade-off is the global supply: one switch powers all four inputs together.
- Pros: +48 VDC stated by the maker; multitrack USB plus SD recording; Bluetooth Super Channel; strong headphone output
- Cons: phantom supply is global across the four inputs; heaviest desk in this group at 3.2 kg
- Buy if: you want one desk that mixes, multitracks to a computer and records a backup to SD
- Skip if: you mix phantom-sensitive microphones alongside condensers on the same desk
Behringer Xenyx 802S: two powered preamps for a streaming desk
The Xenyx 802S is the compact option here for a single condenser at a computer desk. Its page states two XENYX microphone preamps with 48V phantom power for compatible condenser microphones, inside an 8-channel analog mixer built around USB streaming.
The preamps provide gain from +10 to +60 dB with distortion of 0.005% and an EIN figure of 132 dB A-weighted. USB audio runs at 48 kHz and 16-bit in both directions under UAC2 class compliance, and the last stereo channel carries the USB input when nothing is plugged into it, with a Stream to Mix control for routing computer audio to the main mix. A stereo RCA streaming input and output handle external playback and recording devices.
Each channel has 3-band EQ (80 Hz, 2.5 kHz, 12 kHz) and an FX send, and the main, monitor and phones outputs are on 1/4-inch TRS connectors. The desk measures 47 x 189 x 220 mm and weighs 1.6 kg. The limits are clear: only two powered preamps, and USB resolution is fixed at 48 kHz/16-bit, which suits streaming and calls rather than high-resolution music capture.
- Pros: 48V phantom stated for both preamps; USB and RCA streaming paths; very small footprint; per-channel FX sends
- Cons: only two mic preamps; USB fixed at 48 kHz/16-bit
- Buy if: one condenser microphone plus computer audio is your whole setup
- Skip if: you need more powered inputs or higher USB sample rates
Buying guide: choosing mixers for phantom power
Phantom power looks like a checkbox and behaves like a system decision. The sections below cover the questions that decide whether a stated +48V supply fits your microphones: how the switching is arranged, how many inputs are powered, what happens to microphones that do not need power, and which supporting specifications change day-to-day use.
Global or per-channel switching: what changes in practice
Most small desks switch phantom power globally or in groups rather than per input. A global supply, as on the StudioLive AR8c, powers every microphone input at once, which is simple when all your microphones are condensers and a real constraint when one input holds a microphone that should not receive power.
The MG10XU presents its supply as a switchable console feature, and the ProFX10v3 states power on all channels. In practice, global switching means checking every connected microphone before you press the button. Per-channel or grouped switching, where offered, lets a condenser pair run powered while a neighboring input stays unpowered. If your microphone collection mixes types, switching scope deserves as much attention as the +48V figure itself, and it is worth confirming in the manual when a product page does not state it.
How many powered inputs do you really need?
Count the microphones that draw power, not the microphones you own. A solo streamer needs one powered input and is well served by the two-preamp Xenyx 802S, which leaves a spare. A four-person podcast using condensers needs four powered preamps, which is exactly the MG10XU, ProFX10v3, ZED-10FX and AR8c layout.
Panels of five or six powered microphones point to the LiveTrak L-8.
Remember that dynamic microphones on the remaining inputs do not consume the supply, so a desk with four powered preamps can still host additional dynamic microphones on line or unpowered channels where the design allows. Buying one size up from your current condenser count is the practical hedge, because adding a second powered microphone later is the most common upgrade in small studios.
Phantom power and microphones that do not need it
A balanced dynamic microphone connected with a proper balanced cable simply ignores phantom power, which is why mixed desks work at all. The risk cases are specific: some older ribbon microphones can be damaged by a powered input, and unbalanced cables or faulty wiring can route the voltage where it does not belong.
Makers of ribbon microphones state their phantom tolerance in their own manuals, and that document decides.
The working habits are simple. Connect microphones before switching the supply on, keep levels down while switching, and use balanced XLR cables throughout a powered setup. Active DI boxes, by contrast, are designed to run from phantom power, and the ZED-10FX even builds its guitar DI stage around the 48V rail. When a microphone’s own page or manual warns against phantom power, believe it over any mixer feature list.
Gain, pads and high-pass filters around the powered input
A powered input still has to handle level. Condensers are typically more sensitive than dynamics, so preamp gain range matters: the desks here span +10 to +60 dB on the Xenyx 802S, up to 60 dB on the ProFX10v3’s Onyx preamps, +10 to +54 dB on the LiveTrak L-8 and +12 to +55 dB on the AR8c. Quiet speech sits comfortably inside all of those ranges.
Loud sources near a sensitive condenser need the opposite tool. PAD switches on the MG10XU’s mono inputs and the -26 dB pads on LiveTrak channels 3 to 6 cut level before the preamp, and high-pass or low-cut filters (100 Hz on the ProFX10v3, 75 Hz on the LiveTrak L-8) strip rumble that a sensitive condenser picks up from desks and floors. A powered input with a pad and a filter covers more real sessions than one with gain alone.
USB rate and recording format still matter
Phantom power gets the microphone working; the interface decides what you keep. Stereo USB desks such as the MG10XU (24-bit/192 kHz) and ProFX10v3 (up to 192 kHz) record the finished mix, which suits streaming and simple demos. The Xenyx 802S fixes USB at 48 kHz/16-bit, adequate for voice platforms.
Multitrack designs record each powered input separately: the AR8c sends eight channels at 24-bit/96 kHz, and the LiveTrak L-8 records twelve tracks to SD.
Choose by what happens after the session. If every speaker needs separate editing, multitrack capture is worth more than a higher stereo sample rate. If the mix is made live and published as-is, a stereo desk with strong channel processing is simpler and cheaper to run. Either way, the phantom specification and the recording format should be checked on the same product page before buying.
Frequently asked questions
Short answers to the questions buyers ask most about phantom power, based on the specifications and arrangements covered above. Where an answer depends on a specific microphone rather than a mixer, the microphone’s own manual is the deciding document, and these answers say so instead of guessing.
What does +48V phantom power actually supply?
Phantom power sends 48 volts of DC along the same balanced XLR cable that carries the audio, using pins 2 and 3 relative to pin 1. A condenser microphone uses that voltage to charge its capsule and run its internal electronics, and active DI boxes draw it the same way.
The current involved is small; the voltage is a supply rail, not an audio signal, and it does not change the sound of the mixer itself.
Do all mixers for phantom power switch it per channel?
No. Per-channel switching is the exception at this size, because most small desks switch the supply globally or in groups. The StudioLive AR8c documents a global supply, the ProFX10v3 states phantom power on all channels, and the MG10XU presents a switchable console-level feature.
Grouped and global arrangements work well when every connected microphone is a condenser, and they ask for a cable check before switching on when the microphone collection is mixed.
Can phantom power damage a dynamic microphone?
A balanced dynamic microphone on a balanced cable is unaffected in practice, because the voltage appears equally on both signal pins and cancels at the input. Damage stories involve unbalanced cables, miswired adapters or certain older ribbon designs.
If you use ribbon microphones, follow the ribbon maker’s own guidance on phantom tolerance, keep cables balanced, and switch the supply off before plugging or unplugging microphones as a matter of habit.
Does phantom power improve sound quality?
Phantom power does not improve or change sound by itself; it enables microphones that cannot work without it. Sound differences between the desks here come from their preamps, EQ and converters, not from the +48V rail: the D-PRE, Onyx, XMAX and XENYX preamps carry the gain and noise figures quoted in each product section above.
EQ designs range from fixed 3-band layouts to the ZED-10FX’s swept mid. Judge those specifications when comparing audio quality.
What if only one microphone in my setup needs power?
One powered microphone is the most common small-studio case, and then switching scope matters more than preamp count. On a global-supply desk, switching phantom on powers every input, so confirm that the other connected microphones tolerate it, which balanced dynamics do.
Alternatively, a small two-preamp desk such as the Xenyx 802S keeps the powered section small and separate from the rest of a setup, and single-channel inline phantom supplies exist for one-off cases outside this mixer list.
Conclusion
All six desks state their phantom supply in print: the MG10XU and ProFX10v3 for four-preamp analog mixing, the ZED-10FX for EQ-led small-band work, the LiveTrak L-8 for six powered inputs with multitrack recording, the AR8c for hybrid USB and SD capture, and the Xenyx 802S for one condenser at a streaming desk.