Key takeaways
- Compare six headphone mixers for studio cue and monitor work, from networked personal mixers with per-channel EQ to rack headphone units with more-me inputs.
A tracking session stalls when the singer cannot hear enough of her own voice and the drummer wants the click louder than the band. Dedicated headphone mixers for studio work fix that problem by giving each musician a personal cue mix, and this guide compares six current units across both designs in depth.
Quick verdict
The six units split into two families. The Behringer P16-M, PreSonus EarMix 16M, Allen & Heath ME-1 and Aviom A320 are networked personal mixers: each musician mixes channels at a station fed by one network cable. The PreSonus HP60 and ART HeadAmp6 Pro are analog rack units that blend shared mixes with a personal input.
Studios running a compatible digital console get the most from the networked stations, because each performer adjusts level, pan and EQ without calling the engineer. Rooms with an analog desk, or a setup that only needs two shared mixes plus a personal feed, are better served by the rack units, which need no network. No single model wins every room: the ME-1 handles the largest count at 40 sources, and the HP60 adds a talkback input that none of the personal stations offer.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Behringer POWERPLAY P16-M | Networked personal mixer | X32 and Ultranet rooms | 16 channels, 3-band EQ per channel | Needs a P16-I or Ultranet source |
| PreSonus EarMix 16M | Networked personal mixer | StudioLive Series III rooms | 16 mono channels over AVB, 115 dB dynamic range | Tied to AVB and Milan networks |
| Allen & Heath ME-1 | Networked personal mixer | Large channel counts | 40 sources on 16 assignable keys | Full source count needs an A&H console or ME-U hub |
| Aviom A320 | Networked personal mixer | Existing Aviom systems | 16 mono or stereo sources, 32-channel mix engine | Requires an A-Net Distributor for power |
| PreSonus HP60 | Analog rack mixer | Control rooms with talkback | 6 channels mixing A, B and external inputs | Two shared mixes only, no per-source mixing |
| ART HeadAmp6 Pro | Analog rack amplifier | Per-channel tone and aux blend | 500 mW at 32 ohms, bass and treble per channel | No talkback, one shared main bus |
How we selected
The shortlist comes from maker-published product pages and specification sheets, read in full for every unit. A product had to give the listener real mixing control, not just volume: per-channel level and pan on the networked stations, or a blend of shared and personal inputs on the rack units.
Priority went to figures a studio can plan around: how many sources reach each seat, what EQ and limiting the maker lists per channel, how much power the headphone output delivers and into what load, and how the unit is powered and cabled. Where pages disagreed on a figure, the more conservative one is used. Stock signals differed between listings on a few models, and those conflicts are flagged rather than smoothed over.
Six headphone mixers for studio work compared
The four networked stations come first, ordered by the size of the system they serve, followed by the two analog rack units. Every figure below, from channel counts to headphone output power, is one the maker publishes for that exact model. Where a maker does not state a figure, the text says so instead of estimating it.
Behringer POWERPLAY P16-M
The P16-M is a 16-channel digital personal mixer in the POWERPLAY 16 monitoring system. Each performer gets level, pan or spread, solo and mute per channel, plus a 3-band EQ on every channel and 16 storable presets. One shielded CAT5e cable carries power and all 16 signals from a P16-I input module or an Ultranet-equipped console.
The maker lists 24-bit D/A conversion at 44.1 or 48 kHz and system latency under 0.9 milliseconds from the P16-I to the P16-M. The EQ bands are published as bass plus or minus 12 dB at 100 Hz, a semi-parametric mid adjustable from 100 Hz to 10 kHz, and treble plus or minus 12 dB at 10 kHz. An adjustable limiter sits on the output, and two quarter-inch line outputs can feed a powered monitor as well as headphones.
For expansion, the maker states that up to 48 P16-M mixers can be daisy-chained with the P16-D distributor, and a MIDI input allows remote control of all channels. The station draws a maximum of 5 watts from its included supply, or takes bus power from the P16-I or P16-D.
- Pros: full 3-band EQ on every channel; 16 storable presets; one cable carries audio and power; line outputs for a wedge as well as headphones.
- Cons: needs a P16-I module or Ultranet source before it makes a sound; no talkback path; no ambient microphone input.
Buy it if the studio runs an X32 or another Ultranet source and wants each musician to mix 16 channels with EQ at the seat. Skip it if the console has no Ultranet output and the budget will not stretch to the input module the system needs first.
PreSonus EarMix 16M
The EarMix 16M gives each musician 16 mono channels over a Milan-certified AVB network and is designed to work with the StudioLive Series III family of mixers. Channels carry level, pan, solo, mute and stereo link controls, channels can be grouped from the surface, and each seat stores up to 16 mix scenes for recall between songs or sessions.
Processing is generous for a personal station: the maker lists a 3-band EQ and a limiter for every channel plus the main mix. The headphone amplifier delivers a maximum of 150 mW per channel into 60 ohms, with a stated frequency response of 20 Hz to 20 kHz and total harmonic distortion of 0.01 percent. The digital side runs at 44.1 or 48 kHz with a DAC dynamic range of 115 dB, A-weighted at 48 kHz. Balanced line outputs can drive powered floor wedges, and an analog aux input accepts a click track.
Two AVB Ethernet ports let a system network up to 24 EarMix 16M units with a StudioLive Series III mixer. Power comes from the included supply or over the Ethernet cable with a PoE switch. The unit measures 9.4 inches wide, 7.6 inches deep and 1.8 inches high. Availability signals conflict between listings, so US sale status needs settling before ordering.
- Pros: EQ and limiter on every channel; 16 scenes stored per seat; PoE power over the same cable as the audio; balanced line outs for wedges.
- Cons: locked to AVB networking and the StudioLive Series III world; mono channels only at the station; stock signals conflict between listings.
Buy it if the studio already mixes on a StudioLive Series III desk and wants personal cue mixing with per-channel EQ. Skip it if the console is from another family, because the AVB feed this station needs will not come from a non-AVB desk.
Allen & Heath ME-1
The ME-1 is the cornerstone of the ME personal mixing system and handles the largest source count in this guide: up to 40 channels arrive over a single Cat5 cable. Sixteen assignable keys each control a single mono or stereo source or a group of channels, with level and pan for each input, so a musician folds 40 sources into a two-hand layout.
A dimmable OLED screen shows names, levels, pan and meters, and channel names are picked up automatically when the station connects to a dLive, Avantis or SQ mixer. Sixteen user presets store levels, 3-band EQ, pan and mute information and move between units on a USB drive. The master section carries the 3-band EQ and a limiter adjustable from -24 dB to 0 dB. A built-in ambient microphone lets a performer blend room sound into the feed, which helps singers who feel cut off in isolating earpieces.
Headphone outputs sit on both 6.35 mm and 3.5 mm jacks and deliver 300 mW plus 300 mW into a 100 ohm load. The maker lists a frequency response of 10 Hz to 20 kHz, 24-bit conversion at 48 kHz and residual output noise of -95 dB. Power comes over the Cat5 cable at 10 watts, or from the included DC supply. The unit measures 230 by 160 by 70 mm and weighs 1.1 kg. Other console brands feed the system through the ME-U hub.
- Pros: 40 sources, the most here; ambient microphone built in; presets travel on USB; both headphone jack sizes on the rear panel.
- Cons: third-party consoles need the ME-U hub and an option card; EQ lives on the master output rather than per channel; the largest and heaviest station here.
Buy it if sessions run big channel counts, such as a full band with stereo keys and multiple talkback returns, on an Allen & Heath desk or a Dante or MADI rig with the hub. Skip it for small rigs where 16 channels cover everything.
Aviom A320
The A320 is Aviom mid-line personal mixer for the A-Net network. Its 16 mix channels each host a mono or a stereo source, backed by a 32-channel mix engine, so stereo keyboards and stereo submixes do not consume two buttons the way they do on older 16-channel stations. Every channel gets volume and Stereo Placement control, plus solo and mute.
Eight customizable mix presets store a performer settings, and three-band master tone controls, which the maker describes as optimized for in-ear monitors, shape the overall output rather than individual channels. The published audio figures are strong: D/A conversion at 44.1 or 48 kHz and 24-bit, headphone output of 275 mW per side into 50 ohms, frequency response of 3 Hz to 22 kHz, total harmonic distortion under 0.003 percent, signal to noise of -106 dB and latency of 0.880 milliseconds.
The single output is a quarter-inch TRS stereo jack at headphone or line level, fed from one A-Net input on an RJ45 connector that supports both the 16-channel Pro16 and 32-channel Pro16e modes. Cable runs between devices can reach 400 feet on shielded Cat-5e. The unit measures 10.26 by 6.14 by 1.91 inches and weighs 1.3 lb. One hard limit matters: the A320 has no DC power jack. It runs only on 24 volt power delivered over the Cat-5 cable from an A-Net Distributor, which is required hardware, and it works alongside the A640, A360 and older A-16II mixers.
- Pros: stereo sources keep their own buttons; low published latency and distortion; long 400 foot cable runs; mixes into existing Aviom systems of any age.
- Cons: no external power option, so a distributor is mandatory; tone control is master-only; a single output jack limits wedge-plus-phones setups.
Buy it if the studio or venue already owns Aviom input modules or distributors, or is building an A-Net system from scratch. Skip it if the room runs a different network, because the A320 cannot talk to Ultranet, AVB or ME hardware.
PreSonus HP60
The HP60 takes the analog route: a 1U rack unit with six independent headphone amplifiers, each delivering 150 mW per channel. Two stereo input pairs, A and B, arrive on four balanced quarter-inch inputs and route to all six channels. Feed the control-room mix to A and a click to B, and each musician blends the two with a per-channel Mix control.
The mixing trick that earns the HP60 its place here is the external input on every channel: an unbalanced stereo quarter-inch input with its own trim lets each musician add a personal feed, such as their own instrument or voice, on top of the A and B blend. Channel controls add mono and mute, and six line outputs carry a copy of each channel mix. A talkback section takes a balanced XLR input for a dynamic microphone, with a Talk button, talkback level control and a footswitch jack.
Published figures list an input impedance of 10 k ohms, headphone frequency response of 20 Hz to 20 kHz within half a dB into a 60 ohm load, and a working headphone impedance range of 32 to 600 ohms. The steel chassis is 19 inches wide, 1.75 inches high and 5.5 inches deep and weighs 8 lb, with an internal power supply. Two HP60 units link for a 12-headphone system. Stock signals conflict between the maker regional variants, so US availability needs settling before a buyer relies on it.
- Pros: three-way blend per channel (A, B and personal input); talkback with footswitch control; works with any console that has line outputs; line outs expand the system.
- Cons: musicians cannot mix individual sources, only the two shared feeds; no EQ or limiter per channel; analog cabling to the rack for every feed.
Buy it if the studio works from an analog desk or a small interface and wants talkback plus a personal feed per singer. Skip it if performers need to rebalance drums, bass and keys independently, because that job belongs to the networked stations.
ART HeadAmp6 Pro
The HeadAmp6 Pro is a six-channel headphone amplifier in a 1U rack case, and its mixing feature is a six-channel auxiliary input section. Each output channel has a balance control that pans the main bus left or right, or varies the mix between the main bus and that channel auxiliary input, the classic more-me arrangement.
Every channel also carries its own bass and treble controls, plus an individual output level control. Four operating modes per channel, stereo, mono left, mono right and summed mono, help when a singer wants a mono feed in one ear. Outputs appear on both front and rear stereo quarter-inch TRS jacks, and the rear jacks can also feed additional headphone amplifiers. Inputs are XLR and quarter-inch TRS balanced, with thru jacks for bridging several units, and a front panel stereo jack overrides the rear inputs for a quick patch.
The maker lists maximum gain of 25.6 dB with the tone controls flat, input impedance of 40 k ohms balanced, maximum input level of +21.5 dBu and maximum output of 500 mW into 32 ohms, the highest headphone power figure in this guide. Frequency response is 20 Hz to 50 kHz and common-mode rejection is 40 dB. Eight-segment LED indicators watch every channel and the main bus. The case measures 1.75 by 19 by 7.5 inches and weighs 6.8 lbs. There is no talkback input and no way to store settings.
- Pros: per-channel bass and treble; strongest published headphone output here; front override input for quick patches; thru jacks chain multiple units.
- Cons: one shared main bus, so personal mixing stops at the aux blend; no talkback; no presets or metering beyond the LED ladders.
Buy it if the room needs loud, tone-shaped cue feeds for several players at once and the mix stays at the console. Skip it if the engineer needs to talk to the room through the cue system, because this unit has no microphone path.
Buying guide
Choosing between these six units is mostly a question of infrastructure. The console, network and cabling a studio already owns will rule out most of the list before features are even compared. The five points below walk through the decisions in the order they usually bite: ecosystem first, then channel count, processing, mixing style and power.
Choosing headphone mixers for studio sessions on a network
Each networked family speaks one protocol. The P16-M needs Ultranet from a P16-I module or a compatible console, the EarMix 16M needs AVB from a StudioLive Series III desk, the ME stations need an Allen & Heath console or the ME-U hub, and the A320 needs A-Net distribution. Match the station to the desk first.
The analog pair plays by different rules. The HP60 and HeadAmp6 Pro accept line-level feeds from nearly any mixer or interface, which makes them the fallback for rooms with analog desks or older consoles without a personal-mix network. The trade is mixing depth: shared feeds instead of every source at every seat.
Count the sources each musician truly needs
Channel counts on the box can mislead. The ME-1 takes 40 sources but presents them on 16 keys through grouping, the A320 takes 16 sources that may each be stereo, and the EarMix 16M and P16-M take 16 mono channels each. A singer in a four-piece band may use six sources; a drummer in a theatre pit may want twenty.
Count the session, not the console. List what each performer actually adjusts: usually their own instrument, the lead vocal, the click, and a reduced band mix. If that list stays under 16, every station here covers it. Stereo submixes from the desk count as single sources, which stretches the totals further.
Per-channel EQ and limiting: what the spec sheets show
Processing differs across the six. The P16-M and EarMix 16M put a 3-band EQ on every channel, and the EarMix adds a limiter per channel. The ME-1 puts its EQ and limiter on the master output, and the A320 offers master tone controls. The HeadAmp6 Pro gives each channel bass and treble.
Limiting deserves a hard look for in-ear work, because a limiter is the only thing standing between a dropped microphone and a very loud transient in a sealed earpiece. Where the maker publishes a limiter range, such as the ME stations threshold from -24 dB to 0 dB, that figure belongs in the comparison. Where no limiter is listed, plan on discipline at the console.
Analog more-me inputs versus full personal mixing
A more-me input solves the most common complaint, a musician who cannot hear themselves, with one knob. The HP60 blends two shared mixes plus a personal feed per channel, and the HeadAmp6 Pro blends the main bus with a per-channel auxiliary input. For rehearsals and overdubs, that often solves the whole problem with far less wiring.
Full personal mixing answers a different complaint: the balance itself is wrong. When the drummer wants less guitar and more bass while the singer wants the opposite, shared feeds cannot satisfy both, and only a station that receives every source separately can split the difference. Studios recording full bands live feel this limit first.
Power and cabling: PoE, bus power and rack units
Every networked station can draw power from its data cable, but the details differ. The ME-1 draws 10 watts and needs 15 watts available at the hub, the EarMix 16M supports PoE from a compatible switch, the P16-M takes bus power from its input module or distributor, and the A320 runs only on distributor power, with no wall supply option.
Cable length is rarely the constraint it first seems: Aviom publishes 400 feet between devices on shielded Cat-5e, and the Behringer manual recommends a maximum of 246 feet for its Ultranet runs. The rack units avoid the question, sitting in the control room on mains power while headphone extension cables make the trip to the live room.
FAQ
Five questions cover most of what studio owners ask before buying a cue system: whether a mixer replaces talkback, how personal mixers differ from distribution amplifiers, what one cable really carries, how far a system scales, and which network to commit to. Each answer sticks to what the makers of the six units publish.
Do headphone mixers for studio use replace a talkback system?
Only one unit here has a talkback path. The PreSonus HP60 accepts a dynamic microphone on a balanced XLR input and adds a Talk button and a footswitch jack, so the engineer voice lands in every cue mix. The networked personal mixers have no talkback microphone input; the engineer voice must arrive as a channel fed from the console.
The ME-1 ambient microphone points the other way: it lets the performer hear the room, not the engineer. Singers use it to feel less isolated and to hear a producer in the live room without removing an earpiece. It does not send the performer voice anywhere, and it is not a talkback substitute.
What separates a personal monitor mixer from a headphone distribution amplifier?
A personal monitor mixer receives many sources and lets the listener build a balance: the P16-M, EarMix 16M, ME stations and A320 all hand the musician level and pan control over individual channels. A distribution amplifier receives one or two finished mixes and mostly sets volume, which describes the shared-bus side of the HP60 and HeadAmp6 Pro.
The line blurs where distribution units add a personal input. The HP60 blends two shared mixes with a per-channel external feed, and the HeadAmp6 Pro blends its bus with a per-channel auxiliary input, so each listener still shapes part of the result. The honest test is how many sources the listener can rebalance: dozens, three, or one.
Can one network cable really carry the audio and the power?
Yes, and every networked unit here does it. The Behringer manual states that a standard CAT5e connection delivers power and 16 signals to each P16-M, the ME stations draw 10 watts of PoE over their Cat5 link, the EarMix 16M supports PoE from a compatible switch, and the A320 takes 24 volt power over its Cat-5 run from the distributor.
The catch is that the power has to come from the right hardware. A plain network switch will not wake a P16-M or an A320; the input module, hub or distributor at the other end supplies the voltage. Studios should follow the cable guidance each maker publishes, since Aviom specifies shielded Cat-5e for runs up to 400 feet.
How many separate cue mixes can one system run?
Scale differs by family. Behringer states that up to 48 P16-M mixers can be daisy-chained with its distributor, PreSonus networks up to 24 EarMix 16M units with a StudioLive Series III mixer, and the ME system adds stations per hub port, with extra hubs chained when ten ports are not enough. Each station added is one more independent mix.
The analog units scale by outputs instead. The HP60 runs six mixes and links a second unit for twelve, or pairs with the maker HP4 to feed ten pairs of headphones. The HeadAmp6 Pro runs six channels and chains more units through its thru jacks. Both approaches cover a full band.
Which network should a studio commit to: AVB, Ultranet, A-Net or ME?
The console decides. A StudioLive Series III owner is already wired for the EarMix 16M over AVB, an X32 owner has Ultranet for the P16-M on board, and Allen & Heath desks feed ME stations directly. A-Net suits rooms that already own Aviom input modules or want console-agnostic distribution through Dante-fed distributors.
Studios between consoles should price the whole chain, not the station. The input module, hub or distributor that feeds each seat, and the option cards for third-party desks, decide what the system costs to install. A cheaper station on an expensive backbone is not a saving.
Conclusion
Match the station to the console first, then count sources. StudioLive rooms take the EarMix 16M, Allen & Heath rooms take the ME-1, Ultranet rooms take the P16-M and Aviom rooms take the A320. Analog rooms needing talkback and a personal feed per singer take the HP60; rooms needing loud shared feeds take the HeadAmp6 Pro.