Updated Nov 16, 2026· 17 min read

Key takeaways

  • Compare six touchless faucets for kitchen sinks on sensor style, stated flow rates, spray functions, power supply and docking, using only maker-stated specs.

Raw chicken on your hands and a faucet handle you do not want to touch is the daily case for touchless faucets for kitchen sinks. A wave of the hand starts or stops the water, so the handle stays clean. This guide compares six sensor models on activation style, stated flow, spray functions and the power supply each one needs.

Quick verdict

Short on time? The Moen Arlo is the most complete package here, with a sensor on the base, a 68 inch hose and a soap dispenser in the box. The Kohler Sensate is the pick for buyers who never want to change batteries, because it runs on AC power. The Kraus Bolden Sensor is the tallest and strongest flowing model on the list.

Product Type Best for Key spec Main limit
Moen Arlo 87087EWSRS Pull-down, single sensor Complete kits 1.5 gpm flow, 68 inch hose Sensor needs battery power
Moen Align 7565EWSRS Pull-down, single sensor Modern kitchens Power Clean spray, Reflex docking Maker page lists no flow figure here
Moen Arbor 7594EWORB Pull-down, single sensor Transitional styling Pause function on the wand Oil rubbed bronze finish only in this listing
Moen Cia 7622EW Pull-down, single sensor Boosted spray power Power Boost button on the wand Six finish choices to sort through
Kohler Sensate K-72218 Pull-down, Response sensor No battery changes Sensor responds in 20 milliseconds Needs an unswitched outlet below the sink
Kraus Bolden Sensor KSF-1610 Commercial style pull-down Tall pots and strong flow 1.8 gpm flow, 18 3/4 inch overall height Handle must be open before the sensor works

The six models split into two power camps. Five run their sensors from batteries, which keeps installation simple but adds a battery pack under the sink. The Sensate is the outlier: it plugs into AC power, so the sensor is always live, but the maker requires an unswitched outlet below the sink.

Activation style matters as much as power. The four Moen models use a single wave sensor, so one gesture turns the water on and off. The Sensate sensor reacts to a hand or an object such as a pan passing through its window. The Kraus sensor works only after the handle is opened, a routine some households will like and others will not.

How we selected

This list was built from maker and listing pages that state touchless or sensor activation in plain words. A faucet that only reacts when you touch the spout or handle did not qualify, because touch activation and sensor activation solve different problems at the sink. Every model below names its sensor system on its page.

The shortlist favors range: four single-sensor pull-downs from one maker with different styling, spray systems and finish sets, one AC powered model with the fastest stated sensor response, and one commercial style model with the highest stated flow rate and the tallest body.

Each product also had to state how it installs and what happens when the sensor is not used. Where a page leaves a figure unstated, the product section says so rather than borrowing a number from a different model in the same series.

Touchless faucets for kitchen sinks: the six models

The order below runs from the most complete everyday package to the most specialized designs. All six are single-handle pull-down faucets, which is where sensor technology has settled in home kitchens, but they differ in sensor placement, spray systems, finish ranges and the way each one behaves when you would rather use the handle.

Moen Arlo 87087EWSRS

The Arlo puts its single MotionSense Wave sensor on the faucet base, so a wave near the base starts or stops the water while the spout stays free of electronics. The listing states a 1.5 gpm flow rate, a spout reach of 7.87 inches, a 68 inch pull-down hose and a matching soap dispenser, the most complete kit in this roundup.

Moen describes the Arlo as a transitional design with a curved handle and a sculpted base, finished in Spot Resist Stainless, a finish the maker says resists fingerprints and water spots. The pull-down wand runs on the Reflex system for smooth movement and secure docking, and Power Clean spray technology is listed as providing 50 percent more spray power than most Moen pull-down and pull-out faucets without it. The wand offers an aerated stream, a powerful rinse and a pause function.

Installation is flexible for a sensor faucet. The listing states the faucet fits 1 to 4 holes with a deck plate included, works on decks up to 2-1/2 inches thick, and uses the Duralock quick connect system. The spout swivels 360 degrees, the cartridge is the Moen 1255, and supply lines are included. The sensor runs from a battery pack, and the listing shows a 5 year limited warranty entry, which matches the shorter coverage makers tend to give electronic parts.

  • Pros: soap dispenser included; 68 inch hose; fits 1 to 4 hole decks; 360 degree spout swivel
  • Cons: sensor depends on batteries; Spot Resist Stainless is the finish on this listing

Buy it if you want one box that covers the faucet, the deck plate and the soap dispenser, with the sensor placed on the base where splashes are less likely to reach it. Skip it if your sink area has no room for a battery pack under the cabinet, or if you want a finish other than Spot Resist Stainless without moving to a different Moen series.

Moen Align 7565EWSRS

The Align is the modern, straight-lined entry in Moen’s sensor range, sold here in Spot Resist Stainless. Its page states single-sensor hands-free activation: a wave of the hand turns the water on or off, with no need to touch the faucet with dirty or wet hands.

The same page lists the Reflex docking system and Power Clean spray technology, rated by the maker at 50 percent more spray power than its standard pull-downs. Two spray patterns are listed, an aerated stream for everyday cleaning and a powerful rinse for heavy-duty cleaning. The one-handle lever sets temperature and volume in the normal way when you prefer manual control, and the Duralock quick connect system is listed for installation. The maker page for this listing does not print a flow rate or spout dimensions, so this guide does not quote any for the Align; the buying guide explains why that gap matters less than the sensor and spray details for most kitchens.

The Align’s case rests on design and finish. The Align body is the most minimal shape in this group, a plain high arc with no spring coil and no traditional curves. For a kitchen with flat-front cabinets and plain hardware, it is the natural fit among the four Moen models here.

  • Pros: clean modern profile; Power Clean spray; Reflex docking; fingerprint-hiding finish
  • Cons: flow rate not stated on the listing page; battery powered sensor

Buy it if the faucet is a visible design piece in a modern kitchen and you want the sensor version of the Align rather than the manual one. Skip it if you compare faucets by stated flow rate and spout reach, because this listing leaves those figures to the maker’s specification sheet rather than the product page.

Moen Arbor 7594EWORB

The Arbor brings the sensor to a transitional faucet with a flared handle and a curved spout, finished here in oil rubbed bronze, which the maker describes as bronze with tumbled light and dark accents. The page states single-sensor hands-free activation, so a wave turns the water on and off while the handle stays untouched.

The wand offers three listed functions: an aerated stream for everyday cleaning, a powerful rinse for heavy-duty cleaning, and a pause function that stops the flow from the spray head itself. That pause button is genuinely useful on a sensor faucet, because it lets you move the wand between pots without waving at the sensor each time. Power Clean spray technology and the Reflex docking system are both listed, as is the Duralock quick connect system.

The Arbor suits kitchens that mix modern function with traditional shapes: bronze and wood tones, raised-panel cabinets, or a farmhouse sink. It is the only model here listed in a bronze finish, and the only one whose wand adds pause to the stream and rinse pair.

  • Pros: pause function on the wand; bronze finish option; Reflex docking; Power Clean spray
  • Cons: battery powered; dark finish shows water spots more than stainless finishes

Buy it if your kitchen leans traditional and you still want hands-free control, or if the pause function answers the way you actually rinse and fill. Skip it if you want the sensor to run without batteries, because in this roundup that description fits only the Kohler Sensate.

Moen Cia 7622EW

The Cia is the bold, geometric member of Moen’s sensor family, and its listing leads with Power Boost technology rather than Power Clean. The maker describes Power Boost as boosted water performance at the push of a button, for a faster clean and a faster fill. A single-sensor MotionSense Wave system handles touchless activation.

The listing states the standard Moen support systems around that headline feature: the Reflex system for smooth movement and secure docking of the pull-down spray head, the Duralock quick connect system for installation, a one-handle lever, and an aerated stream plus a powerful rinse from the wand. The faucet mounts on the sink or countertop in a standard design and complies with ADA specifications, per the listing.

Finish range is the Cia’s other strength. The listing offers Bronzed Gold, Brushed Gold, Chrome, Matte Black, Polished Nickel and Spot Resist Stainless, the widest finish set among the Moen models in this roundup. That range makes the Cia the easiest sensor faucet here to match to existing hardware, from black cabinet pulls to nickel lighting, without leaving the touchless category.

  • Pros: Power Boost button for faster fill; six finishes; Reflex docking; ADA compliant listing
  • Cons: flow rate not stated on the listing page; battery powered sensor

Buy it if you fill stockpots often and like the idea of a boost button for that job, or if you need a gold or nickel finish in a sensor faucet. Skip it if you want the strongest stated spray figure in the Moen range, because the Power Clean models carry the maker’s 50 percent spray power comparison and the Cia listing does not.

Kohler Sensate K-72218

The Sensate takes a different path from every Moen here: its Response sensor is built into the underside of the spout, and it runs on AC power, so there are no batteries to replace. Kohler states the sensor responds in 20 milliseconds and is precision-designed to limit false activations while you work in the sink.

A wave of a hand, or an object such as a pan, turns the water on or off, and an LED light on the faucet shows when the sensor is ready to respond.

The maker’s specification sheet lists a 1.5 gpm maximum flow rate at 60 psi, a spout reach of 8-7/16 inches and a spout height of 9-9/16 inches, the longest reach in this roundup. The two-function sprayhead switches between an aerated stream and Sweep spray, which the maker describes as a wide, forceful blade of water formed by specially angled nozzles. DockNetik magnetic docking holds the sprayhead in place, and ProMotion technology pairs a braided hose with a swiveling ball joint.

Build details are fully stated: premium metal construction, Kohler ceramic disc valves, a MasterClean sprayface that the maker says withstands mineral buildup, temperature memory, and single-hole installation with flexible supply lines. The trade is under the sink: the maker requires an unswitched 120 V outlet below the sink, within reach of the control box, and switched outlets tied to a disposal are not recommended. The spec sheet lists a lifetime limited warranty for the faucet and a five-year limited warranty for the electronics.

  • Pros: no batteries to change; 20 millisecond sensor response; longest stated reach here; ceramic disc valves
  • Cons: needs an unswitched outlet under the sink; single-hole install, escutcheon sold separately

Buy it if you have, or can add, an unswitched outlet below the sink and you want touchless control without a battery routine. Skip it if your under-sink power is a switched disposal outlet only, because the maker’s installation notes rule that setup out.

Kraus Bolden Sensor KSF-1610

The Bolden Sensor wraps a touchless system in a commercial style body with an exposed spring spout. The maker’s specification sheet states the key difference in how it works: the faucet is sensor operated with the handle opened first, so the handle sets the temperature and the sensor then starts and stops the flow.

A built-in timer stops the water after 3 minutes of continuous flow, and a coin slot switch on the control box can make the faucet fully mechanical if you ever want to bypass the sensor.

Numbers lead this model’s case. The sheet lists a flow rate of 1.8 gpm at 60 psi, the highest in this roundup, an overall height of 18 3/4 inches, a spout height of 6 1/4 inches and a spout reach of 8 5/8 inches. The spout swivels 180 degrees, the cartridge is a 35mm ceramic unit, the body is metal, and the dual function sprayhead switches between spray and stream. Decks up to 3 1/2 inches thick are supported, which is the thickest deck rating here.

Power comes from a battery housing included with the faucet, and the sheet lists an AC adapter as an optional accessory sold separately, so this model can move to plug power later. Finishes on the sheet include Matte Black, Spot Free Stainless Steel and Brushed Brass, plus two-tone combinations. Kraus backs the faucet with its limited lifetime warranty, per the sheet.

  • Pros: highest stated flow rate here; 3 minute automatic shutoff; mechanical bypass switch; thick-deck friendly
  • Cons: handle must be open for the sensor to work; commercial styling will not suit every kitchen

Buy it if you cook with tall pots, want the spring-coil look, and like a sensor that can be switched off at the control box. Skip it if you expect the sensor to work with the handle closed, because this design deliberately ties sensor use to an open handle.

Buying guide

Sensor faucets add two decisions that manual faucets never raise: where the sensor sits, and where its power comes from. Work through those two first, then compare spray functions, docking and installation in the normal way. The sections below follow that order, using only the figures and features the makers state for the six models above.

Sensor placement changes daily use

A sensor on the faucet base, like the Arlo’s, asks for a deliberate wave low on the body, away from the dish work happening under the spout. A sensor in the spout, like the Sensate’s, reacts to hands and objects passing under the arc, which feels natural when you slide a pan into the sink.

Neither placement is better in the abstract. Match the placement to how crowded your sink area is, because a busy drying rack near the sensor window can cause activations you did not intend.

Response speed is the one sensor figure makers publish. Kohler states 20 milliseconds for the Sensate, which is effectively instant at the sink. The Moen listings describe single-sensor wave activation without a millisecond figure, and the Kraus sheet describes a sensor that works only with the handle open. Treat those as different operating styles rather than a ranking.

Battery packs versus plug-in power for touchless faucets for kitchen sinks

Battery power keeps installation simple: mount the faucet, place the battery pack where you can reach it, and the sensor works. The cost is a recurring task, because packs run down and the sensor stops responding until they are changed. AC power removes that task but adds a requirement, an unswitched outlet under the sink.

The Sensate states that requirement plainly, including the warning against switched disposal outlets, so check your cabinet before choosing it.

The Kraus Bolden Sensor sits between the camps: it ships with a battery housing and lists an AC adapter as an optional accessory. If you are unsure which power style suits your kitchen, that flexibility is worth something. Also note the manual fallback on every model here: each faucet keeps a working lever handle, so a dead battery or a power cut never leaves you without water at the sink.

Spray functions and docking still matter

Touchless activation changes how water starts, not how it sprays. Compare the wand functions with the same care you would give a manual faucet. Moen’s Power Clean models carry the maker’s 50 percent more spray power comparison, and the Cia adds a Power Boost button for faster filling.

The Sensate forms its Sweep spray into a blade for rinsing the sink bowl, and the Arbor adds a pause function that stops flow at the wand.

Docking decides whether the wand stays put between uses. Reflex is Moen’s system for smooth movement and secure docking across its four models here. Kohler uses DockNetik magnetic docking on the Sensate, with a ProMotion hose and ball joint to keep the pull-down motion light. Weigh the docking system as heavily as the sensor when you compare models.

Flow rate, reach and clearance

Stated flow rates in this roundup run from 1.5 gpm on the Arlo and the Sensate to 1.8 gpm on the Bolden Sensor, each quoted at 60 psi by its maker. Higher flow fills pots faster; lower flow uses less water per minute. Two Moen listings, the Align and the Cia, do not print a flow figure on the page.

If flow rate is a deciding factor for you, those two models ask for a look at the maker’s specification sheet before you commit.

Reach and height decide what fits under the spout. The Sensate states the longest reach at 8-7/16 inches, the Bolden Sensor states the tallest overall body at 18 3/4 inches with a low 6 1/4 inch spout height because of its spring design, and the Arlo states a 7.87 inch reach with a 68 inch hose for work outside the sink. Measure your sink depth and the pots you fill most often, then match them to the stated figures rather than to the product photos.

Installation and deck fit

Sensor faucets need room under the sink for a control box and, on battery models, a battery pack, on top of the usual supply connections. The Arlo covers the widest deck range here, fitting 1 to 4 holes with its deck plate and decks up to 2-1/2 inches thick.

The Bolden Sensor allows decks up to 3 1/2 inches thick, which suits thick stone counters with an underlay. The Sensate installs through a single hole, with a three-hole escutcheon listed as a separate service part.

Quick connect systems shorten the plumbing work: Moen lists its Duralock quick connect system on the Arlo, Align, Arbor and Cia. Flexible supply lines are listed for the Sensate. None of this removes the need to confirm hole count and spacing on your own sink or counter first, because a sensor faucet that does not match your deck layout will not install cleanly no matter how good its electronics are.

FAQ

Sensor faucets raise questions that manual models never trigger, mostly about power, false activations and what happens when the electronics stop working. The answers below stick to what the makers of these six models state on their pages and specification sheets, without promising performance figures that no page publishes.

Do touchless faucets for kitchen sinks keep working during a power cut?

Battery models keep working until their packs run down, because the sensor draws from the pack rather than the wall. The AC powered Sensate depends on its outlet, but like every model here it keeps a manual lever handle, so the faucet still runs water by hand.

The Kraus Bolden Sensor goes further, with a coin slot switch on the control box that makes the faucet fully mechanical when you want to bypass the sensor entirely.

Will a sensor faucet turn on by itself?

Makers design against that. Kohler states the Sensate sensor is precision-designed to limit false activations while you work in the sink area, and its activation window is the space under the spout. Single-sensor wave models need a deliberate wave near the sensor, a harder gesture to make by accident.

Placement still matters: keep drying racks and tall items out of the sensor window, whichever model you choose.

How long do the batteries last in a sensor faucet?

None of the maker pages for these models states a battery life figure in months or years, so this guide does not quote one. What the pages do state is the setup: Moen’s sensor models run from a battery pack under the sink, and the Kraus sheet lists a battery housing with an optional AC adapter.

If battery changes are a concern, the honest options are the AC powered Sensate or a model with an adapter path like the Bolden Sensor.

Can I install a touchless faucet on a three-hole sink?

Yes, with the right kit. The Arlo listing states a fit for 1 to 4 holes with a deck plate included, which covers most three-hole sinks and counters. The Sensate installs through a single hole, and Kohler lists a three-hole escutcheon plate as a separate service part.

Check the hole count on your sink and the escutcheon situation for the exact model before ordering, because the included parts differ across this list.

Is touch activation the same as touchless?

No, and the difference is the reason this guide exists. Touch activation starts the water when you touch the spout or handle, which still means a dirty hand on the fixture. Touchless activation uses a sensor, so a wave or an object in the sensor window does the work and nothing touches the faucet.

Every model in this roundup is a true sensor model, chosen from wording on its own page that describes wave or motion activation.

Conclusion

For most kitchens, the Moen Arlo is the sensible first choice: sensor on the base, a full kit in the box and a 68 inch hose. Choose the Kohler Sensate if an unswitched outlet sits under your sink and battery changes are off the table. Choose the Kraus Bolden Sensor for the strongest stated flow and a mechanical bypass.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.