Updated Nov 16, 2026· 13 min read

Key takeaways

  • Compare faucets for standard kitchen sink decks on stated hole fit, spout reach and deck plate coverage, the specs that define a mainstream sink installation.

A standard kitchen sink is a single or double bowl deck drilled for one or three holes, and most faucets are drawn for exactly that deck. This guide compares faucets for standard kitchen sink decks on the hole fit, deck plate, reach and mounting figures each listing page prints, so the match is checked on paper before anything is ordered.

Quick verdict

The Delta Lenta and Kohler Simplice are the easiest standard-deck fits, with included deck plates and 1 or 3 hole mounting. The Delta Cassidy and Moen Brantford bring traditional styling, the Kraus Bolden adds a commercial spout, and the Kohler Crue in brass tones is the feature pick.

Standard decks forgive more than specialty sinks, but two printed lines still decide the install: the hole configuration and whether a deck plate is in the box. The reaches here run from 7-7/8 in to 9-19/50 in, which covers the stream placement of typical single and double bowls, and every model prints a maximum deck thickness of 2-1/2 in except the Bolden, whose maker page answers 1.5 in. Each section below quotes its own page, so differences between models are differences in print, not in opinion.

Product Type Best for Key spec Main limit
Delta Lenta 19802Z-BL-DST Pull down, matte black Three hole standard decks 10-3/4 in deck plate included Zinc body
Kohler Simplice K-596-CP Pull down, chrome Tall spout clearance 9-5/8 in spout height, 9 in reach Page lists a 3 hole fit
Delta Cassidy 9197-PR-DST Pull down, traditional Finish choice 1 or 3-hole 8 in installation Escutcheon sold separately
Kraus Bolden KPF-1610SFSMB Commercial style, open coil Statement spout 18-3/4 in height, 8-5/8 in reach 1.5 in max deck; plate optional
Moen Brantford 7185SRS Pull down, traditional Long hose work 68 in hose, escutcheon included 7-7/8 in reach is the shortest here
Kohler Crue K-22972-2MB Professional style pull down Spray functions Three functions incl. Boost 1.5 gpm base flow

How we selected

The standard sink brief asked for mainstream fit first: each model had to print a hole configuration that matches common decks, single hole or 1 or 3 hole, and state its deck plate position, included or separate, on the page. Reach and spout height had to suit a typical bowl, which put the group between 7-7/8 in and 9-19/50 in of stated reach.

Pages were opened and read one by one, and the figures in each section are the figures that page prints for the finish named. Where a model appears in another guide, its numbers are the same numbers from the same page. Each page showed its model in stock or available to ship when read, and no model is described with a spec its page does not print.

Standard decks also carry a quiet complication the specialty guides do not: many were drilled years ago for a two handle faucet with a separate sprayer, so a modern single post model lands on a deck with more holes than it needs. That history is why the deck plate lines in this guide are quoted so closely. A plate that is included and long enough turns an old drilling pattern into a non-issue; a plate that is a separate purchase turns it into a second order and a delay.

Faucets for standard kitchen sink decks in detail

The six models split into two easy-fit picks with plates in the box, two traditional designs, one commercial style spout and one professional style model in a brass tone. The install notes under each name matter as much as the headline specs on a standard deck.

Delta Lenta 19802Z-BL-DST

The Lenta is the most completely specified standard deck fit here: its page states it fits 1 or 3-hole installations and includes a 10-3/4 in deck plate, so both common drillings are covered from one box. Printed dimensions are a 16-1/4 in faucet height and a spout reach printed as 9-13/100 in, with a maximum deck thickness of 2-1/2 in.

The finish read was matte black, the body is listed as zinc, and the valve as a Diamond Coated Ceramic Disc. Flow rate is printed as 1.8 gpm, and the feature list includes ShieldSpray Technology, described by the maker as a concentrated jet that powers away stuck-on messes with an average of 90 percent less splatter than a standard spray, plus MagnaTite docking, Touch-Clean spray holes, a 20-in retractable hose and a 360 degree swivel.

The zinc body is the trade against brass or metal rivals, stated plainly on the page. Everything else about the install is the simplest in this group.

Matte black on a standard deck is also the boldest finish statement in this group, and the page prints it on the model with the longest included plate, which is a practical pairing: the decks that need a 10-3/4 in plate are often older kitchens, and older kitchens are where a full black faucet changes the room most. The spec case and the style case point at the same model here.

  • Pros: longest included deck plate at 10-3/4 in
  • Pros: 1 or 3 hole fit from one box; 1.8 gpm flow
  • Cons: zinc body
  • Cons: reach printed as an unusual 9-13/100 in figure
  • Buy if: your standard deck is three hole and you want black
  • Skip if: a brass or steel body is a firm requirement

Kohler Simplice K-596-CP

The Simplice prints the tallest working clearance in this group: a 9-5/8 in spout height on a 16-5/8 in body, with a 9 in spout reach. On a standard double bowl that height is what lets a stockpot sit in the bowl under the stream, and the reach lands water near the middle of a typical bowl.

The page lists a three-function pull down sprayhead with stream, Sweep spray and pause, DockNetik magnetic docking, ProMotion technology for the sprayhead movement, a MasterClean sprayface described as withstanding mineral buildup, temperature memory and a ceramic disc valve in a metal body. Flow rate is printed as 1.5 gpm, the finish read was polished chrome, maximum deck thickness is 2-1/2 in and the deck plate is included.

The reading note is the hole fit: the page lists 3 Hole in its characteristics. Treat this listing as a three hole deck model with its plate included, and confirm against a single hole deck before ordering.

  • Pros: tallest stated spout height here at 9-5/8 in
  • Pros: 9 in reach and three spray functions
  • Cons: page lists a 3 hole fit only
  • Cons: 1.5 gpm flow
  • Buy if: your standard deck is three hole and pots are tall
  • Skip if: your deck is a single hole with no plate plan

Delta Cassidy 9197-PR-DST

The Cassidy is the traditional design with the widest finish range here: its page lists Lumicoat Chrome and Arctic Stainless alongside Champagne Bronze, Polished Nickel and Venetian Bronze, which lets one model match most kitchen hardware. Dimensions printed are a 15-1/2 in faucet height and a spout reach of 9-19/50 in, with a flow rate of 1.8 gpm.

The page lists 1 or 3-hole 8 in installation, a ceramic disc valve, a zinc body, a maximum deck thickness of 2-1/2 in, and the Delta feature set of ShieldSpray Technology, MagnaTite docking and Touch-Clean spray holes. A coordinating soap dispenser is listed under the model name as a separate item, RP71543.

The deck plate position is the catch: the page lists the deck plate as not included and an optional 10-1/4 in escutcheon, RP71545, as sold separately. On a three hole standard deck that escutcheon is part of the install list.

  • Pros: widest finish range in this group
  • Pros: 9-19/50 in reach and 1.8 gpm flow
  • Cons: escutcheon sold separately for three hole decks
  • Cons: zinc body
  • Buy if: finish matching matters and your deck is single hole
  • Skip if: you want a three hole install with nothing extra to buy

Kraus Bolden KPF-1610SFSMB

The Bolden is the statement piece for a standard deck: the maker page describes an open-coil spring spout, an overall height of 18-3/4 in, a spout height of 6-1/4 in and a spout reach of 8-5/8 in. The finish read was a two-tone Spot Free Stainless Steel and Matte Black on a heavy-duty metal body with a ceramic cartridge.

Flow is printed at 1.8 gpm, the sprayer offers an aerated stream and a powerful spray, the swivel range is stated as 180 degrees and the pull down hose reach is given as approximately 16 in. Mounting is 1 or 3 hole with a required hole size printed as 1-3/8 in to 1-1/2 in, and the maker answers the deck thickness question on the page with a maximum of 1.5 in.

Two install notes follow from that page: the DP02 deck plate is listed as optional and sold separately, and the 1.5 in deck limit is thinner than the 2-1/2 in printed for the rest of this group, so thick counters rule it out.

  • Pros: open-coil commercial look at 18-3/4 in
  • Pros: 1.8 gpm flow; two-tone finish
  • Cons: deck plate optional, sold separately
  • Cons: 1.5 in max deck thickness; 180 degree swivel
  • Buy if: you want the pro coil style on a standard deck
  • Skip if: your counter stack is thick or the deck is three hole

Moen Brantford 7185SRS

The Brantford covers the standard deck in a traditional style: its page lists the theme as Traditional, 1 hole mounting with an optional escutcheon included for 3-hole sinks, and a maximum deck thickness of 2-1/2 in. Printed dimensions are a 15-1/2 in faucet height, an 8-1/4 in spout height and a 7-7/8 in spout reach.

The standout figure is the 68 in hose, the longest printed in this group, which turns the wand into a counter-reaching tool for rinsing a double bowl corner to corner. The page lists a metal body in Spot Resist Stainless, a ceramic disc valve type with a Duralast 1255 cartridge, Reflex docking, Power Clean spray, a 360 degree swivel and a 1.5 GPM flow rate.

The 7-7/8 in reach is the shortest here, so on a wide double bowl the fixed stream sits toward the back of each bowl and the long hose does the traveling. That is a workable pattern, but it is a pattern, not a flaw-free fit.

The escutcheon point is worth repeating for standard decks specifically: older three hole decks are the Brantford home ground, and its page lists the escutcheon as included rather than separate, which is one less part to chase than the Cassidy asks for on the same deck.

  • Pros: escutcheon included for three hole sinks
  • Pros: 68 in hose covers a double bowl fully
  • Cons: shortest reach in this group
  • Cons: 1.5 GPM flow
  • Buy if: you want traditional styling and maximum wand range
  • Skip if: you prefer the fixed stream to reach mid-bowl

Kohler Crue K-22972-2MB

The Crue is the feature-led standard deck pick in a brass tone: the page prints Vibrant Brushed Moderne Brass, a 17-3/16 in faucet height, an 8-3/16 in spout height and an 8-9/16 in spout reach, with 1 hole and 3 hole mounting, a deck plate included and a maximum deck thickness of 2-1/2 in.

Its sprayhead is a three-function pull down design with aerated stream, ring spray and Boost, the maker stating that Boost increases the flow rate by 30 percent over the printed 1.5 gpm base. DockNetik magnetic docking, ProMotion swivel technology, a MasterClean sprayface and temperature memory are listed, with a ceramic disc valve and a metal body.

The mid-pack reach and the tall body are the two checks: the stream will not land as far into a wide bowl as the Cassidy or Simplice, and 17-3/16 in of height needs open room above a standard counter.

  • Pros: three spray functions; deck plate included
  • Pros: brass tone finish on a metal body
  • Cons: 8-9/16 in reach is mid-group
  • Cons: tall body; 1.5 gpm base flow
  • Buy if: spray variety and warm tones lead your list
  • Skip if: your bowl is wide and deep

Buying guide for faucets for standard kitchen sink decks

A standard deck is the easiest install in the kitchen, and the remaining mistakes are all in the parts list rather than the slab. These checks follow the order of the printed lines on a listing page: holes, plate, thickness, reach, then the under-sink hose.

Start with the hole configuration line

Standard decks are drilled single hole or three hole, and the pages here print single hole, 1 or 3 hole and 1 or 3-hole 8 in installation wordings. Match the wording to your deck exactly; an 8 in three hole pattern is the common standard, and it is the pattern the Cassidy page names.

If your deck carries a fourth hole for a sprayer or dispenser, none of these single post models fills it, so plan a dispenser or a hole cover as part of the same order.

Read whether the deck plate is in the box

The components list settles it: the Lenta, Simplice and Crue pages list a deck plate as included, the Brantford lists an escutcheon as included for 3-hole sinks, the Cassidy lists its escutcheon as sold separately and the Bolden maker page lists its plate as optional and sold separately.

On a three hole deck that one line decides whether the install finishes in a day or waits on a second parcel, so read it before the style pages.

Confirm deck thickness, including the odd one out

Five models here print a maximum deck thickness of 2-1/2 in, which covers standard counters and sink ledges. The Bolden maker page answers 1.5 in, the thinnest limit in this series, and that figure excludes thick stone stacks even though the model fits the hole pattern.

Measure the stack at the faucet hole, counter plus support, and compare it with the printed maximum for the model you choose.

Place the reach against a standard bowl

Stated reaches here run from 7-7/8 in to 9-19/50 in. A standard single bowl is well served from about the middle of that range; a double bowl asks for the longer end or for a long hose, which is why the Brantford 68 in hose figure matters despite its shorter reach.

Measure from your faucet hole to the center of the bowl you use most and hold the printed reach next to it before ordering.

Leave room for the hose loop and weight

Every model here is a pull down design whose hose and counterweight hang below the deck and slide as the wand moves. Standard cabinets usually have the room, but a disposal and a water filter can crowd the loop path under the bowl and behind the sink cabinet doors.

The Delta pages print a 20-in retractable hose figure and the Brantford page prints 68 in; either way, check that the loop under your sink can travel without catching on the trap or stored items.

FAQ

These answers rest on the installation, plate and dimension lines printed on the listing pages behind this guide. Standard is used here the way the decks are drilled, single hole or three hole, because that is what the printed configurations describe.

What hole pattern does a standard kitchen sink have?

The patterns named on the pages in this group are a single hole and a three hole 8 in pattern, with most models printing 1 or 3 hole mounting so one faucet covers both. The Cassidy page words it as 1 or 3-hole 8 in installation, and the Lenta page adds an included 10-3/4 in deck plate for the three hole case.

Count your own deck before ordering, including any fourth hole drilled for a sprayer or dispenser, since none of these models fills a fourth hole.

Do I need a deck plate on a standard sink?

Only on a three hole deck, where the plate covers the two outer holes under a single post faucet. It is included on the Lenta, Simplice and Crue listings read and as an escutcheon on the Brantford, sold separately on the Cassidy as RP71545, and optional on the Bolden as the DP02 plate.

On a single hole deck the plate is not used at all, so its absence from a box changes nothing.

Which reach works for a double bowl sink?

The longer stated reaches here, 9 in on the Simplice and 9-19/50 in on the Cassidy, land the stream closer to the middle of each bowl. The Brantford answers the same problem differently, with a 7-7/8 in reach and a 68 in hose that carries the wand across both bowls.

Either pattern works; the printed figures tell you which one a given model is built around.

What deck thickness do standard counters need?

Most models here print a maximum of 2-1/2 in, which covers standard laminate, stone and sink ledge decks with room to spare. The Bolden is the exception at 1.5 in on its maker page, so its fit check is stricter even on ordinary counters with a support board.

Measure the full stack at the hole rather than the countertop alone, because the mounting nut has to clamp all of it.

Can one faucet fit both single and three hole decks?

Yes, that is what the 1 or 3 hole wording on most of these pages means: the faucet mounts through one hole, and the included or optional plate covers a three hole pattern. The Lenta states it directly, fitting 1 or 3-hole installations with its included plate.

The Simplice listing read is the one to double check, since its characteristics line lists a 3 hole fit even though the plate is included. That flexibility is the norm in this group, not the exception.

Conclusion

On a standard deck, the Lenta and Simplice give the simplest fits, the Cassidy the finish range, the Bolden the coil style, the Brantford the hose length and the Crue the spray set. Match the hole pattern and deck plate first, then compare reach and spout height for your bowl. The figures printed on each listing page settle all three checks.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.