Key takeaways
- Compare six grill mats for decks and patios by size, thickness, and material, with the heat ratings, cleaning methods, and clearance rules each maker states.
Grease drips, sauce splashes, and ash dust land under every grill, and wood and composite decking stain fast. A mat for under outdoor grills catches that mess before it soaks in. The six mats below cover rubber, PVC, and absorbent fabric designs in sizes from 30 by 48 inches to 39 by 72 inches, each with its stated specs.
Quick verdict
For most decks, the Rubber-Cal BBQ mat is the strongest all-round pick: 5 millimeters of rubber, a corrugated top, and four sizes. GRILLTEX runs longest at 72 inches for wide grills. Cuisinart and RESILIA bring lighter PVC builds, while DiversiTech and Drymate absorb splashes instead of shedding them, which suits gas grills and lighter use.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Rubber-Cal BBQ Under Grill Mat, 48 x 36 in | Rubber sheet | Heavy grills on wood decks | 5 mm thick, 60 Shore A hardness | Heaviest pick at 16.9 lb in this size |
| GRILLTEX Under the Grill Protective Deck and Patio Mat, 39 x 72 in | Recycled synthetic rubber | Long grills and grill stations | Maker lists heat resistance up to 500 degrees F | Only 0.11 in thick |
| Cuisinart Premium Deck and Grill Mat, 65 x 36 in (CGMT-300) | PVC | Wide gas grills on hard surfaces | 65 x 36 in at 0.25 in thick | Surface guidance conflicts between listings |
| RESILIA Large Under Grill Mat, 36 x 48 in | Flexible PVC vinyl | Renters and light seasonal use | 0.08 in thick, rolls and stores easily | Thin build for heavy cast iron grills |
| DiversiTech The Gas Grill Splatter Mat, 48 in | Absorbent non-woven fabric | Gas grill splashes and drips | Maker lists holds 5x its weight in liquids | Needs 24 in of clearance, gas grills only |
| Drymate Under Grill Mat, 60 x 36 in | Absorbent fabric with waterproof layer | Hosts who wash the mat often | Machine washable per the maker | Maker states it is not fireproof |
How we selected
Each mat below comes from a maker or listing page that states its size, material, and thickness in plain numbers, and each one is sold as a grill mat rather than a general floor covering. Priority went to mats that name the surfaces they suit, state a heat figure or a clearance rule, and give a cleaning method a buyer can follow at home.
Two build families dominate this category. Solid rubber and PVC mats shed grease and rinse clean, but they can trap water against a deck if they sit for weeks. Absorbent fabric mats soak up drips and feel softer underfoot, yet they hold liquid close to the surface and need drying time. The right pick depends on the deck material, the grill weight, and how often the mat gets lifted and cleaned.
Weight and thickness were treated as first-order specs, not fine print. A mat under a grill lives a hard life: caster wheels roll over it, the grease cup drips on it, and it bakes in the sun between cooks. Thin mats win on storage and handling, thick mats win on flatness and service life. The entries below call out those trade-offs with the numbers each maker publishes, so the comparison rests on stated builds rather than on how a mat feels in a showroom.
The best mat for under outdoor grills, compared in detail
The six mats below are ordered from the heaviest solid builds to the lightest absorbent ones. Each entry lists the size and material the maker states, the heat or clearance figure the page gives, and the cleaning method, so the trade-offs between grip, weight, and upkeep stay clear before the buying guide.
Rubber-Cal BBQ Under Grill Mat, 48 x 36 inches
Rubber-Cal builds this mat from reclaimed and natural rubber at a full 5 millimeters thick, and the maker rates the surface at 60 Shore A hardness. That density suits heavy steel and cast iron grills that would curl a thin mat, and the hammer-top corrugations give the sheet grip on smooth concrete and painted wood.
The 48 by 36 inch size weighs 16.9 lb, and the maker lists three more sizes: a 32 inch round mat at 9 lb, a 56 by 32 inch mat at 17.6 lb, and a 72 by 32 inch mat at 22.4 lb. Cleaning is simple on paper: the maker lists water and a mild detergent, and says to keep bleach off the surface. There is no heat rating on the maker page, so treat this as a drip and scuff shield rather than a heat barrier, and keep the firebox clearance the grill maker requires.
Thickness is the real story here. At 5 millimeters, the sheet stays flat under a loaded cart and does not bunch when the grill rolls back into place after cleaning. The round 32 inch size fits kettle grills and round fire pits, while the two 32 inch deep rectangles suit cart grills that sit close to a wall. Because the mat is solid rubber with no absorbent layer, spills stay on the surface where a hose can reach them, and the corrugations channel liquid instead of letting it pool around the grill feet.
- Pros: thickest mat in this group at 5 mm; four sizes including a round option; corrugated top adds grip
- Cons: heavy to move for cleaning; no heat rating stated by the maker
- Buy if: your grill is heavy and your deck is wood or concrete
- Skip if: you need a stated heat rating or a mat you can fold into a drawer
GRILLTEX Under the Grill Protective Deck and Patio Mat, 39 x 72 inches
GRILLTEX stretches to 72 inches long, the longest mat in this group, which fits wide grill stations and smokers with side shelves. The maker builds it from 100 percent recycled synthetic rubber at 0.11 inches thick and 8.8 lb, so it unrolls flat, stays light enough to shift alone, and covers a long footprint.
The listing states heat resistance up to 500 degrees F, and the surface is non-absorbent, so grease beads on top instead of soaking through. The maker describes the material as antimicrobial and lists a 1-year limited warranty. Cleaning is a rinse with water and soap. One caution from owner reports on review pages: rubber mats can leave marks on some composite deck boards, so lift this mat now and then, let the boards dry, and check the color underneath before a full season passes.
Length changes how a mat gets used. A 72 inch sheet can run under the grill and the prep zone beside it, catching the drips that fall when food moves between the two. The thin build is the trade-off: at 0.11 inches it adds almost no cushion, and a heavy grill on casters can creep on a smooth surface. For a long gas grill or a pellet grill with a front shelf, though, the single-piece coverage removes the gap that two smaller mats leave right where grease falls most.
- Pros: longest coverage at 39 x 72 in; stated heat resistance up to 500 degrees F; light for its size
- Cons: thin at 0.11 in; rubber can mark some composite boards if left in place
- Buy if: your grill station is wide and you want one long mat instead of two
- Skip if: your deck maker warns against rubber contact on your boards
Cuisinart Premium Deck and Grill Mat, 65 x 36 inches
Cuisinart makes this mat from 100 percent PVC at 65 by 36 inches and 0.25 inches thick, with a weight of 8.23 lb. The quarter-inch build sits between the thin vinyl sheets and the heavy rubber mats, and the non-slip surface helps the grill feet stay put when the lid swings open on a sloped patio.
The listing names wood, composite, and concrete as surfaces it suits, and cleaning is a rinse. One conflict is worth flagging: a listing summary for the same CGMT-300 model in another market advises against composite use because pooled water under a mat can discolor boards. The practical reading is that any solid mat can trap moisture. Whichever surface you have, lift the mat after rain, let the deck dry fully, and only then roll the mat back out.
At 8.23 lb, this is a mat one person can carry to the hose without help, and the PVC build resists the curling that thin vinyl shows at the edges after a hot afternoon. The 65 inch width covers most three and four burner cart grills with room at the front for the cook to stand on the mat rather than on the deck, which moves the highest drip zone off the boards entirely. Keep the composite caution in mind and this is a balanced mid-weight option.
- Pros: wide 65 in coverage; mid-weight PVC at 0.25 in thick; non-slip surface
- Cons: surface guidance conflicts between listings for the same model
- Buy if: you grill on concrete or wood and want a wide, mid-weight mat
- Skip if: your composite deck maker advises against solid mats entirely
RESILIA Large Under Grill Mat, 36 x 48 inches
RESILIA cuts this mat from flexible PVC vinyl at 48 by 36 inches and only 0.08 inches thick, with an orange peel texture on top. The thin sheet rolls up for storage in a closet or garage corner, which suits renters and seasonal grillers who cannot leave a heavy rubber mat on a shared patio all year.
The maker describes the vinyl as flame retardant, and lists it as phthalate free and DINP free, made with recycled materials in Wheeling, Illinois. The surface is non-slip and waterproof, and the maker lists rinse or hand wash cleaning. At this thickness the mat is a stain shield, not a cushion: it guards against grease spots and scuffs, but it will not level a wobbly grill or add much padding under a heavy cart.
The orange peel texture does quiet work here. It breaks up the smooth sheet so grill feet and shoes grip instead of skating on a wet surface, and it hides the scuff marks that show on flat vinyl. Because the sheet is flexible, it also follows slightly uneven pavers better than a stiff rubber mat. Store it rolled rather than folded, since a hard crease in thin vinyl can take a long time to relax once the mat goes back down.
- Pros: thinnest and easiest to store; waterproof surface; made in the USA per the maker
- Cons: minimal padding at 0.08 in; flame wording is a maker description, not a rating
- Buy if: you need a light mat that stores in a small space
- Skip if: your grill is heavy cast iron or your deck needs cushioning
DiversiTech The Gas Grill Splatter Mat, 48 inches
DiversiTech takes the opposite approach to the solid mats: this 30 by 48 inch mat uses an absorbent non-woven surface that soaks up splashes at the source. The maker lists that it holds 5 times its weight in liquids, and at 1.5 lb and 0.2 inches thick it is easy to shake out, flip, and store between cooks.
The mat is reversible, and the listing also shows a 60 inch size. Two limits matter. The maker designs it for gas grills, and it requires a minimum clearance of 24 inches between the grill and the mat zone, so it does not belong under low fireboxes or charcoal kettles. There is no rubber backing, which means liquid that soaks through a soaked mat can reach the deck; on wood, check under it after a heavy splatter session. The listing states a 1-year manufacturer warranty.
Absorbency changes the cleaning rhythm. Instead of hosing grease across the patio, you lift a light mat that holds the mess in its fibers, shake it out, and hose it down. The flip side is capacity: once the fabric is saturated, extra liquid has nowhere to go, so a cook who fries or griddles often on the grill should size up to the 60 inch version or pair this mat with a drip pan under the grease cup.
- Pros: absorbs splashes instead of spreading them; reversible; very light at 1.5 lb
- Cons: gas grills only; needs 24 in clearance; no rubber backing
- Buy if: your gas grill splatters grease onto a patio you mop often
- Skip if: you cook over charcoal or your firebox sits low
Drymate Under Grill Mat, 60 x 36 inches
Drymate builds this mat from non-woven recycled polyester fabric with an absorbent top layer over a waterproof middle layer, a pairing that catches drips while blocking them from the boards below. At 60 by 36 inches and 2 lb, it covers most cart grills, and the charcoal and brown faces make it reversible.
The maker lists machine washing for this mat, the only one in this group with that cleaning method, which helps after a season of sauce and grease. Be clear on the heat side: the maker states the mat is not fireproof, only heat resistant, so it is a splash and stain shield for gas and pellet grills used with normal clearance, not a mat to slide under a charcoal chimney or a low firebox. The listing text also prints the size as 36 by 59 inches in one blurb, so measure your space against the 60 by 36 inch headline size before ordering.
The layered build explains the behavior. The top layer drinks in splashes so they do not skate across the surface, and the waterproof middle layer stops them before the boards. At 2 lb the mat is easy to hang over a rail to dry, which matters because an absorbent mat put away damp will smell and can mildew. The two color faces also extend service life: when one side fades or stains, the other side starts fresh.
- Pros: waterproof middle layer; machine washable per the maker; reversible two-color design
- Cons: maker states it is not fireproof; size printed two ways in listing text
- Buy if: you want an absorbent mat you can put through the wash
- Skip if: you need a mat rated for direct high heat
Buying guide: choosing a mat for under outdoor grills
Start with the footprint, then the deck surface, then the heat question. A mat that is too small leaves the drip zone exposed, and a mat that traps water can mark the very boards it was bought to protect. The five checks below use the figures the makers state, so you can match a mat to your grill and deck without guesswork.
Size the mat to the grill footprint
Measure the grill at its widest points, including side shelves and the grease cup, then add room in front for the cook and for drips that fall when food moves to a platter. The mats above run from 30 by 48 inches to 39 by 72 inches. A mat that extends past the grill on all sides catches the splatter zone where stains actually start.
Match the material to the deck surface
Rubber and PVC shed liquid and rinse clean, which suits concrete and sealed wood. On composite boards, read the deck maker’s guidance first: listings conflict on composite use for one model above, and owner reports describe marks under rubber mats left in place for months. Absorbent fabrics feel gentler on boards but need drying time after rain.
Read heat ratings and clearance rules closely
Only one mat here states a numeric heat figure: GRILLTEX lists heat resistance up to 500 degrees F. Others use words like heat resistant, and Drymate states plainly that its mat is not fireproof. DiversiTech sets a minimum clearance of 24 inches. Treat these figures as limits from the maker, and keep charcoal chimneys and ash off every mat here.
Decide between absorbing and shedding
Solid mats shed grease, so a rinse restores them, but spilled sauce can run off the edge on a slope. Absorbent mats hold liquid in the fabric; DiversiTech lists a capacity of 5 times the mat weight in liquids. That helps on flat patios, yet a soaked absorbent mat needs to dry before it goes back down, or the deck under it stays damp.
Plan cleaning and storage before you buy
Rubber-Cal lists water and mild detergent, no bleach. Cuisinart and RESILIA list a rinse or hand wash. Drymate lists machine washing. Weight drives the routine: the 48 by 36 inch Rubber-Cal weighs 16.9 lb, while the DiversiTech weighs 1.5 lb. A heavy mat tends to stay down too long, and trapped moisture does the damage owners blame on the mat.
FAQ
Most questions about grill mats come down to three worries: marks on the deck, heat under the firebox, and how long a mat can stay outside. The answers below stick to what the makers and listings state for the six mats above, plus the general care steps that apply to any mat that lives outdoors.
Can a mat for under outdoor grills stay out all season?
It can, but it should not sit untouched. Solid rubber and PVC mats trap rain and wash water against the boards, and owner reports link long, unmoved placements with marks on composite decking. Lift the mat after heavy rain, let it dry, and put it back once the surface is dry. Absorbent mats need the same routine, since fabric holds water.
Will a grill mat mark a composite deck?
It can, and the listings themselves disagree: one Cuisinart listing names composite as a suitable surface, while a summary for the same model advises against composite use because pooled water can discolor boards. The shared lesson is moisture, not the mat alone. Keep the deck dry under the mat, and follow your deck maker’s guidance on mats.
How much clearance does a splatter mat need?
For the DiversiTech splatter mat, the maker sets a minimum clearance of 24 inches and designs the mat for gas grills. Other makers in this group state no clearance number, so use the grill maker’s own clearance guidance for your model. No mat here substitutes for the air gap a hot firebox needs, and none belongs under a lit charcoal chimney.
Can these mats go under a charcoal grill?
Only with care, and one of them not at all: the DiversiTech mat is listed for gas grills. Falling embers and ash are the problem for every mat here. Drymate states its mat is not fireproof, and the solid mats list no ember rating. With charcoal, keep the chimney and ash bucket on a bare surface and use the mat only in the drip zone.
Conclusion
Pick the mat that matches your deck and your cleaning habits: Rubber-Cal for thick rubber protection, GRILLTEX for long stations, Drymate for a washable absorbent layer. Size it past the drip zone, lift it to dry after rain, and a mat for under outdoor grills will guard the boards under your grill for season after season.