Key takeaways
- Compare six USB mixers for streaming with mixes, loopback, XLR mic inputs and phantom power, from compact single-mic units to a four-mic production station.
A stream sounds only as clean as the mixer feeding it, and the best usb mixers for streaming put mic level, game sound and chat on physical controls instead of software menus you have to open mid-broadcast. The six models below range from dual-bus gaming desks to a four-mic production station for group shows.
Quick verdict
For a solo game streamer, the Roland BRIDGE CAST is the most complete desk here, with separate stream and personal mixes and a full set of voice effects. Groups and podcast-style shows point to the TASCAM Mixcast 4, while the Mackie ProFX6v3+ suits musicians who also stream.
| Product | Mic inputs | USB audio | Standout streaming feature |
|---|---|---|---|
| Roland BRIDGE CAST | 1 XLR with 48 V phantom power | USB Type-C, up to 96 kHz on Windows | Separate STREAM MIX and PERSONAL MIX buses |
| TASCAM Mixcast 4 | 4 XLR/TRS combo with auto-mix | 14-in/2-out, 48 kHz, 24-bit | Records up to 14 tracks to an SD card |
| Mackie ProFX6v3+ | 2 Onyx mic pres, up to 60 dB gain | 2×4 USB-C, 24-bit/192 kHz | Loopback mode plus a Bluetooth channel |
| Hercules Stream 200 XLR | 1 XLR with 48 V phantom power | USB 2.0 Type-C, 24-bit/48 kHz | Up to 32 tracks in 8 pages of controls |
| AVerMedia Live Streamer NEXUS AX310 | 1 XLR/6.3 mm with +48 V phantom power | USB 2.0, up to 96 kHz, 24-bit | 5-inch touch panel with widget grid |
| FIFINE AmpliGame SC3 | 1 XLR/TRS combo with 48 V phantom power | USB 2.0, 48/44.1 kHz | Voice changers and four sample pads |
Two designs dominate this group. Dedicated streaming desks like the BRIDGE CAST, the Stream 200 XLR and the NEXUS AX310 split what you hear from what your audience hears, so you can raise your own monitor level without changing the broadcast. Conventional mixers like the ProFX6v3+ and the Mixcast 4 instead bring studio habits to a stream: channel EQ, hardware faders and, in the Mixcast 4, multitrack recording to a card while you are live.
The FIFINE AmpliGame SC3 sits at the compact end. It handles one microphone, adds playful voice effects and sample pads, and connects over a single USB-C cable. It gives up the second mix and the extra inputs of the larger units, so it fits a one-person show where desk space matters more than routing depth.
How we selected these mixers
Every model in this list connects to a computer over USB and is sold by its maker for streaming, gaming or content production. Each one takes at least one XLR microphone, and every figure quoted in the sections below comes from the specifications the maker publishes for that model.
Beyond the USB link, we weighted the features that change a live broadcast in practice. A second mix bus or a loopback mode matters because it decides whether your audience hears exactly the balance you intend. Phantom power matters because many streaming microphones are condensers that will not run without it. Published gain figures matter because dynamic microphones used on streams often need 50 dB or more from the preamp.
We also kept the selection spread across formats. Two of the six are production stations or analog mixers that can anchor a small studio, two are gaming desks built around dual mixes, one is a touch-screen control center, and one is a compact single-input unit. Channel counts, sample rates and dimensions are stated as the makers state them, including limits such as Windows-only support where a maker declares it.
Six usb mixers for streaming, model by model
The six models are ordered by how much desk and how many voices they are built for, starting with the gaming desk that covers the widest range of solo streams and ending with the smallest unit. Each entry lists the inputs, the USB audio path and the streaming features its maker publishes.
Roland BRIDGE CAST
The BRIDGE CAST is a dual-bus gaming mixer: it runs two mixes at once, a STREAM MIX for your audience and a PERSONAL MIX for your own headphones, so the two balances can differ. A 32-bit hardware DSP handles the processing, and the unit links to a computer over USB Type-C.
The microphone input is an XLR preamp with 48 V phantom power, and the channel list covers MIC, AUX, CHAT, GAME, MUSIC, SYSTEM and USB sources. Roland rates the phones output at 78 mW plus 78 mW into 32 ohms, and conversion is 24-bit with 32-bit floating point internal processing. Sampling frequency runs to 44.1, 48 or 96 kHz on Windows and 48 kHz on macOS and iOS.
Voice processing is the deep bench here: a Voice Changer from the VT series, noise suppressor, compressor, equalizer, de-esser, reverb and low cut are all built in. There is a 10-band EQ, five customizable Game EQ presets, 5.1 and 7.1 virtual surround over USB, and a delay function that lines the audio up with your video. The desk measures 222 by 110 by 70 mm, weighs 450 g, runs on USB bus power at 5 V and 900 mA, and also works with PlayStation 5 and Nintendo Switch.
TASCAM Mixcast 4
The Mixcast 4 is a production station for shows with up to four people: four mic inputs on balanced XLR/TRS combo jacks, four headphone outputs with independent volume controls, and an auto-mix function that balances the mic levels. A 5-inch colour touch screen runs the menus and settings.
Its USB side is the widest in this list. The built-in interface offers 14 inputs and two outputs at 48 kHz and 24-bit over USB Type-C, and the unit records up to 14 tracks directly to an SD card at the same time, in WAV format. Mic gain range is 66.5 dB, equivalent input noise is rated at minus 125 dBu or less, and the mic inputs carry a 101 dB signal-to-noise ratio on the maker’s figures.
Guests can join with echo-free audio through mix-minus over Bluetooth, USB or a 4-pole TRRS cable, and eight sound pads in eight banks hold up to 64 sounds, jingles or voice effects such as pitch transformation and reverb. An adjustable delay of 0 to 2000 ms on the USB output lines the sound up with delayed video. The station runs from a 12 V adapter at 12.5 W maximum, weighs 2.55 kg and measures 375 by 57 by 264 mm, so it is a fixture on the desk rather than a travel piece.
Mackie ProFX6v3+
The ProFX6v3+ is a 6-channel analog mixer that doubles as a USB-C audio interface, which makes it the natural pick for musicians who stream performances. Two Onyx mic preamps provide up to 60 dB of gain, with a 100 Hz low-cut filter and 48 V phantom power on all mic channels.
The USB interface runs at 24-bit and 192 kHz in a 2×4 configuration, and its three recording modes map neatly onto streaming work. Standard sends the full mix with effects, Loopback folds computer audio into the mixer signal for streaming, and Interface records channels 1 and 2 without effects processing. A dedicated Bluetooth channel works in both directions, bringing in phone calls or backing tracks from a phone or tablet.
Channels 1 and 2 carry 2-band EQ and one-button compression, Hi-Z switches take instruments directly, and channel 5/6 accepts a stereo 1/8-inch input. The GigFX+ effects engine holds 12 presets that you can edit and store from the full-color LCD screen. The headphone output has its own level and blend control for mixing the computer feed against the direct mixer feed, and the chassis is solid steel.
Hercules Stream 200 XLR
The Stream 200 XLR is an audio controller with a built-in sound card, organized around pages of tracks rather than fixed channels. Four rotary volume controls with mute support handle up to 32 tracks in 8 pages of 4, with stereo VU meters for each track and a 4.3-inch TFT screen showing the layout.
A Creator/Audience button switches between the mix you hear and the mix your viewers hear, and a link button ties volume controls together. The microphone input is a balanced XLR with 48 V phantom power, a JFET preamp and gain made of a 20 dB internal amplifier plus 24 dB adjustable. Mic effects are a noise gate, compressor, equalizer and limiter, handled in the Hercules Stream Control app.
Connections run over USB 2.0 Type-C at 24-bit and 48 kHz, with an optical Toslink input, 3.5 mm line in and line out, and a phones output rated at 64 mW into 32 ohms. Dynamic range is 110 dB. Four action buttons hold up to 32 assignable actions, up to 12 profiles can be stored, and the app pre-integrates Discord, Spotify, Voicemod, Twitch, OBS and Streamlabs. Hercules lists Windows 10 or higher as the system requirement, and the unit measures 155 by 110 by 115 mm at 543 g.
AVerMedia Live Streamer NEXUS AX310
The NEXUS AX310 combines a 6-track audio mixer with a control panel in one unit. Three physical inputs and three digital tracks from the computer are adjusted with six rotational encoders, and a 5-inch IPS touch panel carries an interactive widget grid for scenes, hotkeys and stream controls.
The mic input is a balanced XLR that also accepts 6.3 mm plugs, with +48 V phantom power switched from the NEXUS app. A console can feed in through the optical Toslink input, and headphone and line outputs are 3.5 mm TRS stereo. Audio runs at up to 96 kHz and 24 bits, with a frequency response of 10 Hz to 20 kHz and a dynamic range of 114 dB on the maker’s specification sheet.
Like the BRIDGE CAST, the NEXUS keeps two output mixes, a Creator Mix for your headsets and an Audience Mix for the streaming software, and you can run them as one single mix or as two independent dual mixes with different levels on all six tracks. Mic effects are a noise gate, reverb, compressor and equalizer. The unit needs its 12 V DC supply, draws under 7 W, measures 21.7 by 14.5 by 6.1 cm without its stand, weighs 0.699 kg in that form, and supports Windows 10 20H2 and macOS 10.15 or later.
FIFINE AmpliGame SC3
The SC3 is the smallest mixer in this list: a single-microphone gaming and streaming unit that connects over USB-C and sends audio to OBS, Twitch or a recording program. Its combo jack takes balanced XLR or TRS plugs and supplies 48 V phantom power, with a gain range of 50 dB.
FIFINE rates the mic input at a 20 Hz to 20 kHz frequency response with 75 dB dynamic range, and the USB link carries 48 or 44.1 kHz audio. The 3.5 mm line input accepts a phone, tablet or second PC, the line output sends the finished mix to recorders or a dual-PC setup at up to +10 dBV, and the headphone jack delivers 15 mW into 32 ohms with direct mic monitoring.
The personality features are the draw: 12 auto-tune pitch options, 6 voice changers and 4 sample pads for capturing or triggering sounds, all on the front panel with RGB lighting. FIFINE states plainly that the SC3 works with PlayStation 5, that Xbox does not accept third-party USB audio devices including this one, and that USB microphones cannot be used as inputs, so it is a unit for one XLR or headset microphone and one computer.
Buying guide
A streaming mixer is bought for the show you actually run: how many people speak, whether a console or second PC feeds in, and how much you want to adjust by hand while live. The five checks below follow the order in which those decisions usually narrow the field from six models to one.
Count your microphones first
Most solo streams need exactly one good mic input, and five of the six models here provide a single XLR input with phantom power. Only the TASCAM Mixcast 4 takes four microphones at once, with a headphone output for each person, which is the dividing line between solo and group formats.
If a co-host joins over the internet instead of in the room, the input count matters less than call handling. The Mixcast 4 offers mix-minus call-ins over Bluetooth, USB or a TRRS cable, the ProFX6v3+ brings calls in on its Bluetooth channel, and the SC3 accepts a phone or second PC on its line input. Match the connection your guest workflow already uses.
Decide whether you need a second mix
A second mix lets the audience hear a different balance from the one in your headphones, which is useful when you want your own voice louder for monitoring or game sound lower in your ears than on the broadcast. The BRIDGE CAST, Stream 200 XLR and NEXUS AX310 all build their design around this split.
Single-mix designs are simpler to run. On the ProFX6v3+, the Loopback recording mode folds computer audio into the stream mix, and the headphone blend control still lets you set how much of the computer feed you hear against the direct mixer feed. On the SC3 there is one mix only, which keeps setup short for a one-person show.
Check gain and phantom power against your mic
Phantom power decides whether a condenser microphone works at all, and every model here supplies 48 V on its XLR input. Gain decides whether a quiet dynamic microphone reaches a healthy level: the published ranges run from 50 dB on the SC3 to 66.5 dB on the Mixcast 4, with the ProFX6v3+ at 60 dB.
Read the fine print on how the gain is delivered. The Stream 200 XLR splits its figure into a 20 dB internal amplifier plus 24 dB of adjustable gain, and its preamp is a JFET design that needs the 48 V supply switched on. The BRIDGE CAST and NEXUS switch phantom power in software or from the panel, so confirm the control location suits how you work.
Match the USB audio spec to your software
Sample rate and routing decide how the mixer appears inside your streaming software. The ProFX6v3+ records at up to 192 kHz, the BRIDGE CAST and NEXUS reach 96 kHz, and the Mixcast 4, Stream 200 XLR and SC3 work at 48 kHz, which is the rate most streaming platforms and video tools expect by default.
Track count over USB differs more than sample rate. The Mixcast 4 sends 14 channels to the computer, so each microphone can be recorded separately, while the 2×4 path on the ProFX6v3+ and the stereo paths on the smaller desks send the finished mix. If you edit after the show, multitrack output is worth more than a high sample rate.
What matters most in usb mixers for streaming
Desk fit is the last filter. The BRIDGE CAST at 450 g and the SC3 are compact enough for a crowded gaming desk, the Stream 200 XLR and NEXUS add screens that earn their space by showing levels and controls, and the Mixcast 4 at 2.55 kg is a permanent studio piece with faders for eight channels.
Power and platform support close the decision. The BRIDGE CAST runs from USB bus power, while the Mixcast 4 and NEXUS need their 12 V adapters, and the Stream 200 XLR is a Windows-only unit on its maker’s specification. Console streamers should note which units list console support: Roland names PlayStation 5 and Nintendo Switch, and FIFINE names PlayStation 5 while ruling out Xbox.
FAQ
These answers cover the questions that come up most when a first streaming mixer is chosen: dual-PC setups, console use, phantom power, sample rates and recording while live. Each answer sticks to what the makers of the six models above publish about their own hardware and software.
Can one of these mixers run a dual-PC streaming setup?
The NEXUS AX310 documents dual-PC routing in its manual, including sending the line output as a chat mic feed to the second machine. The SC3 can link two PCs through its line output, although FIFINE notes it is not built for dual setups and that alerts from the streaming PC may not be heard back.
For a single-PC show none of this matters, and the simpler units are easier to run. If a dual-PC layout is the plan from the start, the NEXUS and the Mixcast 4, with its separate monitor and line outputs, give the most complete published routing for it.
Do usb mixers for streaming work with game consoles?
Some do, within limits the makers state. Roland lists the BRIDGE CAST as working with PlayStation 5 and Nintendo Switch alongside Windows and Mac computers, and FIFINE states the SC3 works with PlayStation 5. Console audio can also enter the NEXUS AX310 and the Stream 200 XLR through their optical inputs.
Xbox is the recurring exception: FIFINE states that third-party USB audio devices are not accepted by Xbox, its own mixer included. The Stream 200 XLR is specified for Windows computers only, and the ProFX6v3+ and Mixcast 4 are presented by their makers as computer-centered units, so console-first streamers should start with the BRIDGE CAST or the optical-input models.
What does phantom power do for a streaming microphone?
Phantom power is a 48 V supply sent down the XLR cable that condenser microphones need in order to operate. All six models here provide it on the mic input: the BRIDGE CAST and Mixcast 4 specify DC 48 V, the NEXUS switches +48 V from its app, and the Stream 200 XLR ties its JFET preamp to the 48 V supply.
Dynamic microphones do not need phantom power, but they usually need more gain, which is why the gain figures in the buying guide matter. Ribbon microphones are the cautious case in any setup; follow the microphone maker’s own guidance on phantom power before switching it on.
Is 48 kHz enough, or should a streaming mixer run at 96 kHz or higher?
For live streaming, 48 kHz is the working standard: it is the rate the Mixcast 4, Stream 200 XLR and SC3 are built around, and it matches what streaming platforms and video editors expect. The BRIDGE CAST and NEXUS AX310 offer up to 96 kHz, and the ProFX6v3+ reaches 192 kHz, which suits music recording more than broadcasting.
A higher rate does not fix a weak microphone position or a noisy room. Choose the higher-rate models when the same desk also records music or voice work at those settings; choose the 48 kHz models when streaming is the whole job and simpler routing is worth more.
Can I record the show while streaming it?
Yes, and the Mixcast 4 does it without the computer: it records up to 14 tracks to an SD card while its USB interface feeds the stream, so each microphone stays separate for editing. The ProFX6v3+ records through its USB modes, including an Interface mode that captures channels 1 and 2 without effects.
The smaller desks record through the computer instead. The BRIDGE CAST sends its stream mix over USB, the NEXUS presents its Audience Mix as an input to the streaming software, and the SC3 sends its finished mix over its USB-C link, so the recording is the mix itself rather than separate tracks.
Conclusion
Pick the BRIDGE CAST for a solo gaming desk with two mixes and deep voice processing, the Mixcast 4 for a four-person show that records every mic, and the ProFX6v3+ for music-led streams. The Stream 200 XLR, NEXUS AX310 and SC3 cover page-based control, touch-screen widgets and the very smallest one-mic setup.