Updated Nov 17, 2026· 18 min read

Key takeaways

  • Six 240mm AIO water coolers that fit the NZXT Phantom 410 top mount, with slim 27mm radiators, fan and tube specs, fit notes, and a buying guide for your build.

The NZXT Phantom 410 takes a 240mm radiator, but its 30mm clearance rules out thick radiators, so the radiator you pick matters more than the brand on the box. The best water coolers for NZXT Phantom 410 builds use slim 27mm radiators, two 120mm fans, and tubing long enough to reach the pump. This guide compares six coolers that meet those limits.

Quick verdict

All six coolers in this guide use a 240mm radiator that is 27mm thick or close to it, which is the size the Phantom 410 top mount is built around. The differences are the display, the fans, the tube length, and the sockets each model supports, so the right pick depends on your build rather than on cooling claims alone.

Product Type Best for Key spec Main limit
DeepCool LT520 WH 240mm AIO White builds and quiet pumps Radiator 282 x 120 x 27 mm Pump speed is listed at a fixed 3100 RPM
Thermaltake TH240 V2 ARGB Sync Snow Edition 240mm AIO Motherboard RGB sync Radiator 276 x 120 x 27 mm Lighting needs a 5V ARGB header
NZXT Kraken Plus 240 RGB 240mm AIO with LCD Compact LCD display Radiator 281 x 120 x 27 mm One-piece fan frame cannot be split across mounts
Cooler Master MasterLiquid 240L Core ARGB White 240mm AIO Low noise focus Radiator 277 x 119.6 x 27.2 mm White finish only in the version listed
ASUS ROG Strix LC II 240 240mm AIO High airflow fans Radiator 121 x 272 x 27 mm Fans reach 37.6 dB(A) at full speed
NZXT Kraken Elite 240 RGB 240mm AIO with large LCD Large IPS display Radiator 281 x 120 x 27 mm Pump cap is 93.5 mm wide and 65 mm tall

For most Phantom 410 builds, the NZXT Kraken Plus 240 RGB is the easiest pick to live with. Its single-frame fan array mounts with four screws and one cable, its 39.1 mm display shows system temperatures at a glance, and its 281 x 120 x 27 mm radiator sits inside the 30mm clearance the case maker lists for the top mount.

If a quiet build matters most, the Cooler Master MasterLiquid 240L Core ARGB White lists fan noise of 27.2 dBA at most and pump noise of 12 dBA at most, the lowest figures in this group. If fan airflow matters most, the ASUS ROG Strix LC II 240 lists 80.95 CFM per fan, and the DeepCool LT520 WH lists 85.85 CFM, the highest figure here.

How we selected

Selection started with the case, not the cooler. The Phantom 410 maker lists clearance for a top 240mm dual radiator with 30mm of clearance, so every cooler here had to use a 240mm radiator no thicker than 27.2mm, with two 120mm fans and tubing that can reach from the top mount to the CPU socket.

Each product was matched against published specifications from maker pages and listing pages that were opened and read. Radiator length, width, and thickness were compared with the 30mm top clearance. Fan speed, airflow, noise, and static pressure were taken from the same pages, along with tube length, pump speed, socket support, and warranty length where the maker stated it.

Coolers with radiators thicker than the listed clearance were left out, as were models whose maker pages gave no radiator dimensions at all. A thick radiator can still press against the motherboard or the memory slots, so thickness was treated as a hard limit. The six coolers below all clear that limit, each with a different mix of display, lighting, noise, and socket support.

Water coolers that fit the NZXT Phantom 410

Each cooler below was picked because its radiator fits the Phantom 410 top mount on paper and its maker publishes the dimensions to prove it. Read the fit notes first, then the specs, then the trade-offs, so the cooler you choose matches your motherboard, your memory, and the look you want.

DeepCool LT520 WH

The DeepCool LT520 WH suits a white Phantom 410 build where the pump should stay quiet and the fans should move plenty of air. Its 282 x 120 x 27 mm aluminum radiator fits the 30mm top clearance with room to spare, and its white finish matches a light colored build from the radiator to the pump.

The maker lists a fourth generation pump that runs at 3100 RPM with a noise level of 19 dB(A), which is the lowest pump noise figure in this guide. Two FK120 fans are included, each measuring 120 x 120 x 25 mm, with a speed range of 500 to 2250 RPM, airflow of 85.85 CFM, static pressure of 3.27 mmAq, and noise of up to 32.9 dB(A). The tube length is 410 mm, and the pump measures 94 x 80 x 68 mm.

Socket support covers Intel LGA2066, 2011-v3, 2011, 1700, 1200, 1151, 1150, and 1155, plus AMD sTRX4, sTR4, AM5, and AM4, so it fits a wide range of older and newer boards. The maker describes a multidimensional infinity mirror top cap on the pump, addressable RGB lighting, and fluid dynamic bearings in the fans. A 3 year warranty is listed on the listing page.

One limit is the pump itself. The pump speed is listed at 3100 RPM with no lower speed given, so it does not offer the wide pump speed range that some other coolers in this guide list. The pump block is also large at 94 x 80 x 68 mm, so measure the space around your CPU socket and memory slots before fitting, especially on compact boards.

  • Radiator is 27 mm thick, inside the 30mm top clearance
  • Fan airflow of 85.85 CFM is the highest figure in this guide
  • Pump noise of 19 dB(A) is the lowest pump noise figure here
  • Broad socket support across Intel and AMD platforms
  • White finish suits light colored builds
  • Pump speed is listed at a fixed 3100 RPM with no range given
  • Large pump block at 94 x 80 x 68 mm needs room around the socket
  • Fan noise reaches up to 32.9 dB(A) at full speed

Buy if you want a white 240mm cooler with strong listed airflow, a quiet pump, and broad socket support for a Phantom 410 build.

Skip if you want a pump with a wide adjustable speed range, or if your motherboard leaves little room around the CPU socket for a large pump block.

Thermaltake TH240 V2 ARGB Sync Snow Edition

The Thermaltake TH240 V2 ARGB Sync Snow Edition suits a white build where the lighting is run from the motherboard instead of from separate cooler software. Its 276 x 120 x 27 mm aluminum radiator is the shortest in this guide, which leaves a little more room at the top of the case.

The maker lists a copper water block with a thickened 20mm copper chamber and a 27mm slim radiator, plus two CT120 ARGB White fans. Each fan measures 120 x 120 x 25 mm, runs at 500 to 2000 RPM, moves up to 57.05 CFM, and is listed at 25.8 dB-A noise with 2.23 mm-H2O static pressure. The tube length is 460 mm, the longest in this guide, and the pump runs at 1500 to 3300 RPM.

Socket support covers Intel LGA 2066, 2011, 1851, 1700, 1200, 1156, 1155, 1151, and 1150, plus AMD AM5, AM4, AM3+, AM3, AM2+, and AM2. The maker describes an infinity mirror light design on the pump cap, a daisy-chain fan cable design that reduces cable clutter, and sync with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The maker lists the cooler as in stock on its own page.

The main limit is the lighting setup. The cooler needs a 5V addressable RGB header on the motherboard for its lighting effects, so boards without that header cannot drive the lights. Fan airflow of 57.05 CFM is also the lowest figure in this guide, so this pick trades some listed airflow for its long tubes and its slim radiator.

  • Shortest radiator here at 276 mm long, with a 27 mm thickness
  • Longest tubes in this guide at 460 mm, for flexible routing
  • Lowest listed fan noise here at 25.8 dB-A
  • Wide socket support including older Intel and AMD platforms
  • Lighting syncs with major motherboard RGB software
  • Lighting needs a 5V addressable RGB header on the motherboard
  • Fan airflow of 57.05 CFM is the lowest figure in this guide
  • White finish only in the version listed

Buy if you want a white cooler with long tubes, low listed fan noise, and lighting that follows your motherboard software in a Phantom 410 build.

Skip if your motherboard has no 5V addressable RGB header, or if the highest listed fan airflow is a priority for your build.

NZXT Kraken Plus 240 RGB

The NZXT Kraken Plus 240 RGB suits a builder who wants a small display on the pump without a large pump cap or a tangle of cables. Its 281 x 120 x 27 mm aluminum radiator fits the 30mm top clearance, and its single-frame fan array mounts with four screws and one cable.

The maker lists a 39.1 mm TFT display with 240 x 240 px resolution, a 30 Hz refresh rate, and 300 cd/m2 brightness, plus an NZXT Turbine pump that runs at 1,200 to 2,800 RPM. The included F240 RGB Core Fan is a single-frame array measuring 240 x 120 x 26 mm, with a speed range of 500 to 2,400 RPM, airflow of 75.05 CFM, static pressure of 3.07 mmH2O, and noise of 31.9 dBA. The tubing is 400 mm long, and the cold plate is a split-flow copper design measuring 56 x 56 mm.

Socket support covers Intel LGA 1851, 1700, 1200, and 115X, plus AMD AM5 and AM4. The maker describes pre-applied thermal paste, tool-free mounting brackets, a single breakout cable from the pump cap, and control through NZXT CAM software. A 6 year warranty is listed. The pump cap measures 72.95 mm across and 55.97 mm tall, which is compact next to the larger display pumps in this guide.

The main limit is the fan design. The two 120mm fans come joined in one frame, so they cannot be split across two mounts or reused separately elsewhere in the case. Socket support is also narrower than some rivals here, covering current Intel and AMD sockets but not the older platforms that other coolers in this guide still list.

  • Small 39.1 mm display shows temperatures and images on the pump
  • Single-frame fan array installs with four screws and one cable
  • Compact pump cap at 72.95 mm across and 55.97 mm tall
  • 6 year warranty is the longest listed here
  • Pre-applied thermal paste and tool-free mounting brackets
  • One-piece fan frame cannot be split across mounts
  • Socket support covers current platforms only
  • Radiator is 281 mm long, the joint longest in this guide

Buy if you want a tidy 240mm cooler with a small pump display, simple cabling, and a long warranty for a Phantom 410 build.

Skip if you need support for older CPU sockets, or if you want two separate fans that can be placed independently.

Cooler Master MasterLiquid 240L Core ARGB White

The Cooler Master MasterLiquid 240L Core ARGB White suits a quiet white build where low listed noise matters more than a display on the pump. Its 277 x 119.6 x 27.2 mm aluminum radiator fits the 30mm top clearance, and the maker lists this model as in stock on its own page.

The maker lists a Gen S dual chamber pump with noise of 12 dBA at most, plus two 120mm ARGB fans that run at 650 to 1750 RPM, move up to 71.93 CFM, and are listed at 27.2 dBA at most with 1.86 mmH2O static pressure. The pump measures 81 x 76 x 47 mm. The maker lists pump MTTF of more than 70,000 hours and fan MTTF of more than 160,000 hours, plus a 3 year warranty.

Socket support is the widest in this guide, covering Intel LGA 1851, 1700, 1200, 1151, 1150, 1155, and 1156, plus AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, and FM1. The maker describes an expanded radiator surface, CryoFuze performance thermal paste, and a clean classic design. The fans use rifle bearings and 4-pin PWM connectors.

The main limits are modest. The maker does not state the tube length on the page opened, so routing room should be measured before fitting rather than assumed. Fan top speed of 1750 RPM is also the lowest top speed in this guide, which matches the low noise figures but caps the listed airflow at 71.93 CFM.

  • Lowest listed fan noise here at 27.2 dBA at most
  • Lowest listed pump noise here at 12 dBA at most
  • Widest socket support in this guide, including older platforms
  • Long listed MTTF figures for pump and fans
  • Listed as in stock on the maker page
  • Tube length is not stated on the maker page opened
  • Fan top speed of 1750 RPM caps listed airflow at 71.93 CFM
  • No display on the pump

Buy if you want a quiet white 240mm cooler with the widest socket support in this guide for a Phantom 410 build.

Skip if you want a pump display, or if you need a stated tube length to plan routing in advance.

ASUS ROG Strix LC II 240

The ASUS ROG Strix LC II 240 suits a build where fan airflow is the priority and the pump should stay simple. Its 121 x 272 x 27 mm aluminum radiator is the shortest in this guide, and its two fans list the joint highest airflow figures here, with a copper water block and pre-applied thermal compound in the box.

The maker lists two ROG Fan Model 12 fans, each measuring 120 x 120 x 25 mm, with a speed range of 800 to 2500 RPM, static pressure of 5.0 mmH2O, airflow of 80.95 CFM, and noise of 37.6 dB(A). The water block measures 80 x 80 x 45 mm with a copper plate, and the sleeved rubber tube is 380 mm long. A 6 year warranty is listed, and the package includes pre-applied thermal compound.

Socket support covers Intel LGA 1700, 1200, 115x, 1366, 2011, 2011-3, and 2066, plus AMD AM5, AM4, and TR4. The maker lists Aura Sync support, PWM and DC fan control, and a 1-to-2 fan splitter cable in the box. The 380 mm tube is the shortest in this guide, so routing from the top mount should be planned with care on taller boards.

The main limit is noise at full speed. The fans are listed at 37.6 dB(A), the highest noise figure in this guide, so the top of the fan curve is loud even though the airflow is strong. The pump speed is also not stated on the page opened, so there is no listed pump range to compare with the other coolers here.

  • Fan airflow of 80.95 CFM with 5.0 mmH2O static pressure
  • Widest listed fan speed range here at 800 to 2500 RPM
  • Short radiator length of 272 mm for the top mount
  • 6 year warranty is the longest listed here
  • Aura Sync support and a fan splitter cable in the box
  • Fan noise of 37.6 dB(A) is the highest figure in this guide
  • Tube length of 380 mm is the shortest here
  • Pump speed is not stated on the page opened

Buy if you want strong listed fan airflow and static pressure from a 240mm cooler with a long warranty for a Phantom 410 build.

Skip if low fan noise matters more than airflow, or if the shortest tube length in this guide could make routing tight in your build.

NZXT Kraken Elite 240 RGB

The NZXT Kraken Elite 240 RGB suits a builder who wants the largest pump display in this guide as the center of the build. Its 281 x 120 x 27 mm aluminum radiator fits the 30mm top clearance, and its 69 mm IPS display is the biggest screen on any cooler here.

The maker lists a 69 mm IPS display with 640 x 640 px resolution, a 60 Hz refresh rate, 690 cd/m2 brightness, and 16.7 million colors, plus an NZXT Turbine pump that runs at 1,200 to 2,800 RPM. The included F240 RGB Core Fan is a single-frame array measuring 240 x 120 x 26 mm, with a speed range of 500 to 2,400 RPM, airflow of 75.12 CFM, static pressure of 3.3 mmH2O, and noise of 30.0 dBA. The tubing is 400 mm long, and the fan lifespan is listed at 60,000 hours.

Socket support covers Intel LGA 1851, 1700, 1200, and 115X, plus AMD AM5 and AM4. The maker describes a split-flow copper cold plate, pre-applied thermal paste, tool-free mounting brackets, a single breakout cable, and control through NZXT CAM software. A 6 year warranty is listed. The display orientation is software adjustable, so it can read correctly however the pump is mounted.

The main limit is the size of the pump cap. It measures 93.5 mm across and 65 mm tall, the largest pump in this guide, so it needs room around the CPU socket and can crowd tall memory modules on some boards. The radiator is also 281 mm long, the joint longest here, so the top mount should be measured end to end before fitting.

  • Largest display here at 69 mm IPS with 640 x 640 px resolution
  • Bright display at 690 cd/m2 with a 60 Hz refresh rate
  • Single-frame fan array installs with four screws and one cable
  • 6 year warranty is the longest listed here
  • Display orientation is software adjustable
  • Pump cap is the largest here at 93.5 mm across and 65 mm tall
  • Radiator is 281 mm long, the joint longest in this guide
  • Socket support covers current platforms only

Buy if you want the biggest pump display in this guide with strong listed fan specs and a long warranty for a Phantom 410 build.

Skip if your board has tall memory close to the socket, or if you want support for older CPU sockets.

Buying guide for water coolers for the NZXT Phantom 410

The Phantom 410 is an older mid-tower case with a clear set of limits, so the buying process is mostly a fit exercise. Work through radiator size, mount position, tube length, fan figures, and socket support in that order, and the shortlist narrows itself.

Radiator size and thickness first in the best water coolers for nzxt phantom 410

The case maker lists clearance for a top 240mm dual radiator with 30mm of clearance, and that single line decides most of the purchase. A 240mm radiator uses two 120mm fans side by side, so radiator length runs from 272 mm to 282 mm here. Thickness is the tighter limit, since every cooler here is 27 mm or 27.2 mm thick.

Measure the top of your case before ordering, including the space between the radiator and the top of the motherboard and memory. A radiator thicker than the listed clearance can press against memory modules or heatsinks, and a longer one can foul the rear fan or the front drive cage. If a cooler you like uses a radiator thicker than 30mm, leave it out.

Top mount or front mount in the best water coolers for nzxt phantom 410

The top mount is the documented fit for this case, and the case maker lists clearance for a top 240mm dual radiator. Mounting at the top puts the radiator above the pump, which is the usual advice for all-in-one coolers, and it keeps the front of the case free for intake fans and drive cages.

The case maker does not state front radiator support on the page opened, so a front mount should be treated as unproven rather than assumed. The front of the Phantom 410 holds drive cages, and a front radiator would need the cages moved or removed and the tubes routed around the graphics card. For the simplest install, use the top mount and keep the front for airflow.

Tube length and routing

Tube length decides how much freedom you have when the radiator sits at the top of the case and the pump sits on the CPU. The Thermaltake model lists 460 mm tubes, the longest here, followed by the DeepCool at 410 mm, both NZXT models at 400 mm, and the ASUS at 380 mm. The Cooler Master maker does not state tube length.

Longer tubes make routing easier and let the radiator sit flat without pulling on the pump, while shorter tubes need the pump and the radiator ports to line up more closely. Route the tubes so they do not press against the memory slots, the graphics card backplate, or the side panel, and leave a gentle curve rather than a sharp bend at each end. A tube that is pulled tight can strain the fittings over time, so measure the run from the top mount to the socket before you buy.

Fan noise and airflow

Fan figures are the easiest specs to compare and the easiest to misread, since makers measure them under their own conditions. The DeepCool lists 85.85 CFM at up to 32.9 dB(A), the ASUS lists 80.95 CFM at 37.6 dB(A), the NZXT models list 75.05 CFM and 75.12 CFM, and the Thermaltake lists 57.05 CFM at 25.8 dB-A.

Read airflow and noise together rather than alone. High airflow with high noise suits a build where cooling headroom matters more than quiet running, while lower airflow with lower noise suits a build that sits near the user. Static pressure matters too, since the fans push air through the radiator fins, and the figures here run from 1.86 mmH2O to 5.0 mmH2O.

Socket support and pump head clearance

Socket support varies more than radiator size in this guide, so match the cooler to your board before anything else. The NZXT models cover Intel LGA 1851, 1700, 1200, and 115X plus AMD AM5 and AM4, which suits current builds. The other models also list older sockets, including LGA 1151, 1150, 2011, and 2066.

Pump head size is the other half of the fit. The NZXT Kraken Elite pump cap measures 93.5 mm across and 65 mm tall, the DeepCool pump measures 94 x 80 x 68 mm, the Cooler Master pump measures 81 x 76 x 47 mm, and the ASUS water block measures 80 x 80 x 45 mm. A tall or wide pump can crowd tall memory modules, so compare the pump dimensions with the space around your socket.

FAQ

These questions cover the fit issues that come up most often with this case, from radiator sizes that do not fit to socket support on older boards. Each answer uses the published specifications from the pages opened for this guide, so you can match the answer to your own build.

Will a 280mm water cooler fit this case?

No, a 280mm radiator should not be planned for this case. The case maker lists clearance for a top 240mm dual radiator, and does not list 280mm support on the page opened. A 280mm radiator needs two 140mm fans side by side and a longer mount, which the listed top clearance does not describe.

What is the thickest radiator that fits the top mount?

The case maker lists a dual radiator water cooling solution with a clearance of 30mm at the top, so the radiator should be no thicker than 30mm. Every cooler in this guide is 27 mm or 27.2 mm thick, which leaves a small margin under that limit for the top mount.

Can I mount a 240mm radiator at the front of the case?

The case maker does not state front radiator support on the page opened, so a front mount cannot be recommended from the published specifications. The page lists clearance for a top 240mm dual radiator, and that is the mount this guide is built around.

Do these water coolers fit older Intel and AMD sockets?

It depends on the model. The Cooler Master, Thermaltake, DeepCool, and ASUS coolers list older sockets such as Intel LGA 1151, 1150, 1155, and 2011, and AMD AM3 and AM2, depending on the model. The two NZXT coolers list only current sockets, namely Intel LGA 1851, 1700, 1200, and 115X plus AMD AM5 and AM4.

Does a water cooler need any care after fitting?

An all-in-one cooler needs little care, but a few habits keep it running well. Keep the radiator fins free of dust so air can pass through, and clean them gently with the system off. Listen for changes in pump or fan sound, and look at the tubes and fittings now and then for any sign of wear.

Conclusion

The Phantom 410 rewards a slim 240mm cooler, and the NZXT Kraken Plus 240 RGB is the pick that suits most builds here, with its compact display, simple cabling, and 281 x 120 x 27 mm radiator. Choose the Cooler Master for low noise, the ASUS for airflow, or the Kraken Elite for the largest display, and measure the top mount before you order.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.