Key takeaways
- We compared six furnace filters for viruses by MERV rating, size, and maker claims. See which 1-inch and 4-inch filters fit your system and household needs.
A furnace filter stands between your home and the air that moves through it, so the rating, size, and media shape what it can hold back. The best furnace filters for viruses pair a MERV 11 to MERV 13 rating with a fit that matches your slot or cabinet. This guide compares six filters from pages we opened, quoting maker claims as stated.
Quick verdict
Filtrete MPR 1500 is the direct pick for a 1-inch slot when a named virus figure matters, and Aprilaire 213 is the direct pick for a 4-inch media cabinet. Nordic Pure MERV 12 covers the middle ground, while the Honeywell pair covers MERV 11 and MERV 13 in one cabinet size.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Filtrete MPR 1500 Allergen, Bacteria and Virus Air Filter | 1 inch pleated | 1 inch slots | MERV 12, MPR 1500 | No deep media option |
| Nordic Pure 20x25x1 MERV 12 Pleated Air Filter | 1 inch pleated | Multi-pack value | MERV 12, 0.3 micron capture | Change every 1 to 3 months |
| Aprilaire 213 Replacement Filter | 4 inch deep media | Aprilaire cabinets | MERV 13, 12 month schedule | Fits Aprilaire cabinets only |
| Honeywell FC100A1037 Media Air Filter | 4 inch media | Honeywell cabinets | MERV 11, low pressure drop | Lowest rating here |
| Honeywell FC200E1037 Charged-Media Filter | 4 inch media | Honeywell cabinets | MERV 13, charged media | Fits Honeywell cabinets only |
| Filterbuy 20x25x1 MERV 11 Pet and Allergy Defense | 1 inch pleated | Pet homes | MERV 11, 14 pleats per foot | MERV 11 is the lowest rating here |
How we selected
We compared published specifications and maker descriptions for furnace filters with MERV 11, MERV 12, or MERV 13 ratings, and we kept only models with a clear size and a stated rating that we could open and read. Filters that named viruses or fine particle capture ranked higher.
The MERV scale runs from 1 to 16, and a higher number means the media is rated to catch finer particles from the air that passes through it. MERV 13 sits at the top of the range most homes use, and MERV 11 suits systems that need an easier breathing filter. No furnace filter can act on every particle in a room, because it only works on air that moves through the ductwork. Where a maker lists a figure for virus particles, we quote it as stated.
The filters in this guide
Six filters made this guide, covering a different mix of rating, depth, and cabinet fit. Two are 1-inch pleated filters at MERV 12, two are 4-inch Honeywell media filters, one is a 4-inch Aprilaire at MERV 13, and one is a 1-inch Filterbuy at MERV 11.
Filtrete MPR 1500 allergen, bacteria and virus air filter
Filtrete MPR 1500 is the one filter here whose maker names viruses in the product name, and it fits the keyword more directly than any other pick. The maker describes it as an Allergen, Bacteria and Virus filter with a MERV 12 rating and a MPR 1500 rating.
The maker lists that the filter will help pull and capture microparticles such as pet dander, smoke, bacteria, and up to 54 percent of virus airborne particles, while letting cleaner air flow through. That figure applies to airborne particles that pass through the filter. The filter is electrostatic and pleated, made from polypropylene, and listed for residential use only, in a nominal 20x25x1 size for furnace, air conditioner, and heat pump use.
MERV 12 sits below MERV 13, so homes that want the highest common residential rating will look past this filter. The listing we opened does not state a change interval, so the owner should fill that detail from the maker page. The filter is a 1-inch model, so it cannot serve a 4-inch media cabinet.
- Maker names viruses in the product name and lists a 54 percent figure for virus airborne particles
- MERV 12 with MPR 1500 gives strong fine particle capture for a 1-inch filter
- Electrostatic pleated media built on Filtrete 3-in-1 technology
- MERV 12 is below the MERV 13 rating of the top picks in this guide
- Only a 1-inch depth, so it cannot fit a media cabinet
Buy it if your slot is 20x25x1 and you want a maker stated virus figure. Skip it if your cabinet takes a 4-inch filter or your manual calls for MERV 13.
Nordic Pure 20x25x1 MERV 12 pleated air filter
Nordic Pure MERV 12 is the plain value pick in this guide, a 1-inch pleated filter sold as a six pack for homes that change filters often. The maker describes it as a MERV 12 filter with electrostatically charged synthetic pleated media, comparable to filters rated MPR 1500 to 1900.
The maker lists an actual size of 19.5 by 24.5 by 0.75 inches against the nominal 20x25x1 size, and the six pack weighs 4.4 pounds. The frame is a heavy duty, moisture resistant beverage board frame, and the media is electrostatically charged to attract unwanted particles. The maker describes the filter as capturing airborne particles as small as 0.3 microns, and as helping trap pollen, fine dust, smoke particles, airborne plant spores, bacteria, and some viruses. The maker also states that the media does not promote the growth of bacteria or mold on the filter.
The maker recommends changing the filter every 1 to 3 months, and people with pets or allergies should change filters more often. That short window is the main limit, because a six pack still turns over fast in a home with pets, dust, or heavy system use. The filter is a 1-inch model, so it cannot fit a media cabinet. The maker notes that a MERV 14 filter may overwhelm a weaker residential system.
- Six pack keeps spares on hand for a full year of changes
- MERV 12 media rated to capture particles as small as 0.3 microns
- Maker describes trapping bacteria and some viruses among the particles listed
- Heavy duty moisture resistant frame with electrostatically charged media
- Change window of 1 to 3 months means frequent swaps
- Only a 1-inch depth, so it cannot fit a media cabinet
Buy it if your slot is 20x25x1 and you like keeping spares on the shelf. Skip it if your cabinet takes a 4-inch filter or you want a longer change window.
Aprilaire 213 replacement filter
Aprilaire 213 is the deep media pick in this guide, a 4-inch MERV 13 filter made for Aprilaire whole house air purifiers and media cabinets. The maker lists it as a genuine Aprilaire replacement filter, and it suits a home that already has an Aprilaire air cleaner.
The maker lists a nominal size of 20 by 25 by 4 inches, with item dimensions of 4 by 26.63 by 20.6 inches and an item weight of 2.5 pounds. The material is polyester, the construction is pleated, and the maker lists 28 square feet of filtering media. The maker describes the filter as trapping common allergens including airborne pollen, mold spores, bacteria, pet dander, dust particles, and dust mites as air circulates through the MERV 13 filter. The recommended replacement schedule is 12 months. The maker lists compatibility with Aprilaire Air Cleaner Models 1210, 1620, 2120, 2200, 2210, 2216, 3210, and 4200, plus Space-Gard 2200 with Upgrade Kit 1213.
The maker describes Self-Seal Technology that reduces air bypassing the filter, and an Interlock Rail System that needs no assembly. The filter is designed and made in the USA, and the maker notes performance tested to ASHRAE 52.2 at MERV 13. The main limit is fit: this filter serves Aprilaire cabinets only, and a standard 1-inch slot cannot take it. The maker lists no virus figure for this model, so its case rests on the MERV 13 rating and the deep media.
- MERV 13 rating with a 12 month replacement schedule
- 28 square feet of media area in a 4-inch deep pleated build
- Self-Seal Technology and Interlock Rail System for a snug cabinet fit
- Wide Aprilaire cabinet compatibility across eight listed models
- Fits Aprilaire cabinets only, not a standard 1-inch slot
- Maker lists no virus figure for this model
Buy it if you have an Aprilaire air cleaner from the listed models and you want MERV 13 capture with a 12 month schedule. Skip it if you have a 1-inch slot.
Honeywell FC100A1037 media air filter
Honeywell FC100A1037 is the lighter media pick in this guide, a MERV 11 filter for Honeywell F100 and F200 media air cleaners and Space-Gard 2200 cabinets. The maker lists it as a 20 by 25 media air filter, and it suits a home whose manual calls for MERV 11.
The maker spec sheet lists a nominal size of 20 by 25 by 4 inches, with an actual size of 19.94 by 24.88 by 4.38 inches and a product weight of 1.6 pounds. The filter is white, listed as a replacement filter, and for use with 20 by 25, 25 by 20, and 25 by 22 F100 and F200 media air cleaners, plus SpaceGard 2200. The maker lists a static pressure drop of 0.23 inches of water column at 500 feet per minute, the lowest figure in this guide.
MERV 11 is the lowest rating in this guide, so it is rated to catch less of the finest particles than the MERV 12 and MERV 13 picks. The maker lists no virus figure and no change interval on the spec sheet we opened, so the owner should fill the change interval from the maker page. The filter fits Honeywell and SpaceGard cabinets only, not a standard 1-inch slot.
- Lowest pressure drop in this guide at 0.23 inches of water column at 500 feet per minute
- MERV 11 rating suits systems that need an easier breathing filter
- Actual size is stated to the hundredth of an inch for a precise cabinet match
- MERV 11 is the lowest rating in this guide
- Maker lists no virus figure for this model
- Fits Honeywell and SpaceGard cabinets only
Buy it if your cabinet is a Honeywell F100 or F200 or a SpaceGard 2200, and your manual calls for MERV 11. Skip it if your slot is 1 inch deep.
Honeywell FC200E1037 charged-media filter
Honeywell FC200E1037 is the MERV 13 twin of the FC100A1037, a charged-media filter that fits the same Honeywell cabinets at a higher rating. The maker lists it as a 20 by 25 MERV 13 charged-media filter for homes that want the finest particle capture in this guide.
The maker spec sheet lists a nominal size of 20 by 25 by 4 inches, with an actual size of 19.94 by 24.88 by 4.38 inches and a product weight of 2.2 pounds. The filter is white, listed as a replacement filter, and for use with 20 by 25, 25 by 20, and 25 by 22 F100 and F200 media air cleaners, plus SpaceGard 2200. The maker lists a static pressure drop of 0.28 inches of water column at 500 feet per minute, a small step above the MERV 11 model in the same cabinet.
The filter fits Honeywell and SpaceGard cabinets only, and it will not fit a standard 1-inch slot or an Aprilaire cabinet. The higher rating brings a higher pressure drop than the MERV 11 model, so a home with an older blower should read the system manual before stepping up. The maker lists no virus figure and no change interval on the spec sheet we opened.
- MERV 13 charged media in the same cabinet size as the MERV 11 model
- Same actual size as the FC100A1037, so a swap needs no cabinet change
- Pressure drop of 0.28 inches of water column at 500 feet per minute
- Higher pressure drop than the MERV 11 model in the same size
- Maker lists no virus figure for this model
- Fits Honeywell and SpaceGard cabinets only
Buy it if your cabinet is a Honeywell F100 or F200 or a SpaceGard 2200, and you want MERV 13 capture. Skip it if your manual calls for MERV 11 or your slot is 1 inch deep.
Filterbuy 20x25x1 MERV 11 pet and allergy defense
Filterbuy MERV 11 Pet and Allergy Defense is the pet home pick in this guide, a 1-inch pleated filter aimed at homes with pets and allergies. The maker describes MERV 11 synthetic media as the choice for homes with pets or allergies, comparable with MPR 1200 and FPR 7.
The maker lists an actual size of 19.50 by 24.50 by 0.75 inches against the nominal 20x25x1 size, and the model is AFB20x25x1M11pk1. The maker lists that the media can trap 95 percent of dust particles while guarding the home from smoke, smog, lint, pollen, mold, and dander without holding back air flow. The construction is electrostatically charged with 14 pleats per foot, and the maker lists that the media lasts 3 times longer than fiberglass models, with a change every 90 days for best results. The frames are industrial grade beverage board with dual wire backings, rated to endure temperatures up to 200 degrees Fahrenheit and stand up to moisture, and the components are made in the United States.
MERV 11 is the lowest rating in this guide, so it is rated to catch less of the finest particles than the MERV 12 and MERV 13 picks. The maker lists no virus figure for this model, so its case rests on dust and allergen capture, not on a named virus claim. The filter is a 1-inch model sold as a single pack in the listing we opened.
- Maker lists trapping 95 percent of dust particles for pet and allergy homes
- 14 pleats per foot with electrostatically charged media
- Frames rated to endure up to 200 degrees Fahrenheit and resist moisture
- MERV 11 is the lowest rating in this guide
- Maker lists no virus figure for this model
- Single pack in the listing we opened, so spares need a separate order
Buy it if your slot is 20x25x1 and you have pets or allergies. Skip it if you want the finest particle capture in this guide.
Buying guide
A furnace filter is a fit problem before it is a rating problem, because a filter that does not seat in your slot lets air pass around it. Start with the size printed on your old filter, match the MERV rating to your manual, then weigh the change interval against your household load.
Match the MERV rating to your system in the best furnace filters for viruses
MERV 11, MERV 12, and MERV 13 cover the range most homes use, and each step up is rated to catch finer particles from the air that passes through the filter. MERV 13 is the highest common residential rating here, while MERV 11 suits systems that need an easier breathing filter.
For this keyword, the rating matters because viruses travel on airborne particles, and a higher MERV rating is rated to catch more of the fine particles that carry them. Pick the highest rating your manual allows.
Measure nominal size against actual size
Every filter in this guide carries two sizes, and the gap between them trips up many buyers. The nominal size is the rounded label on the box, such as 20x25x1, while the actual size is the true measurement, such as 19.50 by 24.50 by 0.75 inches. Makers cut the actual size slightly small so the filter slides into the slot.
A filter that is too small leaves gaps at the edges, and air will pass around the media instead of through it. A filter that is too large will not seat, and forcing it can bend the frame. Read the size printed on your old filter frame, then compare the actual size on the listing before you order.
Pick 1-inch slots against 4-inch media cabinets
A 1-inch filter slides into a slot in the return duct or the furnace cabinet, and it is the common setup in most homes. A 4-inch filter slides into a dedicated media cabinet, and it holds far more media area in the same face size. The two depths are not interchangeable, and a 4-inch filter will not fit a 1-inch slot.
The Aprilaire 213 lists 28 square feet of media, and that depth is what lets a MERV 13 filter run for 12 months while a 1-inch filter is changed every 1 to 3 months. If your home has a media cabinet, buy the filter made for that cabinet model. Adding a media cabinet is a job for an HVAC contractor, not a filter swap.
Change intervals and household load
The change interval is the second half of the rating, because a loaded filter catches less and strains the blower more. The 1-inch filters here carry short windows, while the 4-inch Aprilaire 213 lists a 12 month schedule as the payoff for its deep media.
Nordic Pure recommends every 1 to 3 months, and Filterbuy lists every 90 days for best results. A filter that looks gray and matted is past its useful life, and one that bows or sags should be replaced at once. Mark the change date on the frame, and set a calendar note so the swap does not slip.
Airflow, static pressure, and when to ask a technician
Every filter adds resistance to airflow, and the maker figures in this guide show the trade in plain numbers. The Honeywell FC100A1037 lists a static pressure drop of 0.23 inches of water column at 500 feet per minute, the lowest figure in this guide.
The FC200E1037 lists 0.28 inches of water column at the same airflow, so the MERV 13 model adds a small amount of resistance over the MERV 11 model. A deep 4-inch filter spreads that resistance over more media area than a 1-inch filter. Ask a technician when the choice is unclear: if your manual does not state a MERV ceiling, or if rooms heat and cool unevenly after a filter change.
FAQ
Shoppers ask the same questions about furnace filters for viruses, and the answers come down to ratings, fit, and honest limits. The questions below cover what a MERV rating can and cannot do, how to size a filter, how often to change it, and when a higher rating is wrong.
Do furnace filters for viruses need a MERV 13 rating
No, a MERV 13 rating is not a must, and a MERV 12 filter can be a sound choice when the maker names virus particles in its own wording. The Filtrete MPR 1500 carries a MERV 12 rating, and the maker lists that it captures up to 54 percent of virus airborne particles.
The Nordic Pure MERV 12 also sits at MERV 12, and the maker describes it as helping trap bacteria and some viruses. MERV 13 suits systems built for it, but a MERV 12 filter that fits your slot and your manual is a better buy than a MERV 13 filter that strains your blower.
Can a furnace filter remove viruses from home air
A furnace filter can only act on the air that passes through it, so it cannot reach every particle in a room. The maker claims in this guide are framed that way, with Filtrete listing up to 54 percent of virus airborne particles and Nordic Pure describing some viruses.
A filter is one part of indoor air care, alongside fresh air and cleaning. No filter in this guide claims to cure, treat, or stop illness. Read the maker claim as stated, match the rating to your system, and change the filter on schedule.
What size furnace filter do I need
Read the size printed on the frame of your old filter, and buy that nominal size, such as 20x25x1 or 20x25x4. Then compare the actual size on the listing, because the actual size is always slightly smaller than the nominal size. Measure the slot with a tape if the old filter is missing.
For the filters in this guide, the actual sizes run from 19.50 by 24.50 by 0.75 inches for a 1-inch Filterbuy to 19.94 by 24.88 by 4.38 inches for a Honeywell media filter. A filter that fits snugly with no gaps is the right one.
How often should a furnace filter be changed
The interval depends on the depth and the maker wording. The 1-inch filters in this guide carry short windows, while the 4-inch Aprilaire 213 lists a 12 month schedule. Homes with pets should change on the short end of the window. Pets, cooking, and long system runs all load a filter faster.
Nordic Pure recommends every 1 to 3 months, and Filterbuy lists every 90 days for best results. Mark the change date on the frame, and set a calendar note so the swap does not slip.
Will a higher MERV rating strain my furnace
It can, and that is why the system manual sets the ceiling. A higher MERV rating adds resistance to airflow, and the maker figures show it: the Honeywell FC200E1037 at MERV 13 lists a higher pressure drop than the MERV 11 FC100A1037 in the same cabinet.
The MERV 13 model lists 0.28 inches of water column at 500 feet per minute, against 0.23 for the MERV 11 model. A system built for MERV 13 will carry that load, while an older blower may run longer and noisier. Read the manual, and ask a technician if the ceiling is unclear.
Conclusion
Pick the filter that matches your slot, your cabinet, and the MERV rating your system can carry, then change it on schedule. Filtrete MPR 1500 suits 1-inch slots, Aprilaire 213 suits Aprilaire cabinets, and the Honeywell and Nordic Pure options cover the rest. Fit and timing matter as much as the rating.
Write Your Review
No reviews yet. Be the first to share your experience!