Updated Nov 16, 2026· 15 min read

Key takeaways

  • Compare six steak cuts for the grill by weight, thickness, marbling, and cooking style, with every cut verified on a butcher product page before buying today.

Picking a cut of steak for grills is a trade among tenderness, marbling, thickness, and how a cut behaves over direct heat. This guide compares six cuts from one working butcher, using the weights, thicknesses, aging notes, and grill guidance printed on each product page, so the differences rest on stated facts.

Quick verdict

For most grill cooks, the NY Strip is the balanced answer: a hand-cut, dry aged steak of 0.69 to 0.81 lbs with its fat cap left on, firm enough to sear hard and tender enough to serve at medium rare. The ribeye beside it trades a little of that neatness for heavier marbling.

The filet is the tenderness pick and the least forgiving on the grate, while flank and hanger are the flavor picks for cooks who slice before serving. The chuck eye is the quiet value in the case: the butcher cuts it from the same muscle as the ribeye, and most shoppers walk straight past it. Every cut below carries the maker’s own grilling tag on its product page.

Cut Where it comes from Weight or thickness Best for Main limit
NY Strip Steak Back of the beef 0.69 to 0.81 lbs Balanced searing Fat cap needs care over direct heat
Everyday Boneless Ribeye Rib section near the shoulder 3/4 inch thick Rich marbling Slim cut cooks in minutes
Filet Mignon Tenderloin 0.44 to 0.56 lbs Tenderness Little fat, dries out if overcooked
Flank Steak Belly 1.38 to 2.0 lbs Slicing for a group Must be sliced against the grain
Hanger Steak Diaphragm support muscle 1 to 1.5 lbs Deep beef flavor One per animal, sold as one piece
Chuck Eye Steak Shoulder, by the rib section 0.69 to 0.81 lbs Ribeye character Only six steaks per animal

How we selected

Each cut in this guide was read on its own product page from the butcher that sells it, and a cut counted only when the page named the cut, stated its weight or thickness, described where it comes from on the animal, and carried the maker’s own grilling tag among its listed uses.

All six cuts come from the same butcher, which keeps the comparison honest: the same pasture-raised program, the same aging room, and the same page format sit behind every entry, so the differences below are differences between cuts rather than between sellers. The maker states no USDA grade on these pages, so no grade is claimed for any cut here; the comparison runs on cut, weight, thickness, aging, and the maker’s printed grill notes instead. Cuts whose pages showed them out of stock at another butcher were left out rather than described from memory.

Six cut of streak for grills picks, cut by cut

The six cuts below cover the full grill range, from a slim weeknight ribeye to a whole flank built for slicing. Each entry gives the cut’s origin on the animal, the size the butcher sells, the aging behind it, and the grill handling the maker’s own cooking notes describe.

NY Strip Steak

The strip is the reference steak for the grill: hand-cut, dry aged, and sold at 0.69 to 0.81 lbs, with the fat cap left on by the butcher. The maker cuts it from the back of the beef, where the muscles do little work, which is why the strip eats tender without being soft.

The maker’s page sets the strip between its two famous neighbors, calling it less fussy than a ribeye and more flavorful than a filet, and that middle position is exactly what a grill cook wants. The fat cap bastes the steak as it renders, the body of the cut takes a hard sear without falling apart, and the maker’s cooking notes aim it at an internal temperature of 130 degrees F for medium rare, starting with the fat cap and resting the steak before cutting. The strip’s one demand is attention at the fat edge, where rendering fat over direct heat can flare; a cooler zone on the grate solves it. For a single cut that behaves predictably for beginners and still rewards experienced cooks, this is the steak to learn on.

Pros: balanced tenderness and beef flavor; fat cap bastes the steak as it cooks; clear maker guidance for medium rare. Cons: fat cap can flare over direct heat; sold in a narrow weight band, so very large appetites may need two. Buy if: you want one dependable grilling steak for most occasions. Skip if: you chase maximum marbling above all else.

Everyday Boneless Ribeye

The ribeye is the marbling pick, and this version is built for weeknights: the butcher cuts it a slimmer 3/4 inch thick, portions it for one, and dry ages it like the rest of the case. That thinner profile is the whole point, since it sears fast and rests fast.

The maker describes rich marbling and a buttery fat cap, and names the parts in the steak: the eye, the spinalis, and the fat cap that keeps the cut juicy. The ribeye comes from the upper back near the shoulder, from softer, less-worked muscle fibers, which is why a ribeye eats richer than a strip of the same weight. The maker’s cooking notes again target 130 degrees F for medium rare with a quick sear and a rest. The slim cut is both the appeal and the limit: at 3/4 inch there is little margin between a hard sear and an overdone center, so this steak rewards a hot grate, a timer, and confidence. Cooks who want a thick, slow-finished ribeye should look at the butcher’s thicker bone-in versions rather than this everyday cut.

Pros: heaviest marbling in this guide; portioned for one; dry aged depth in a fast-cooking format. Cons: 3/4 inch thickness leaves little timing margin; rich fat is too much for some eaters. Buy if: you want ribeye flavor on a weeknight schedule. Skip if: you prefer a thick steak you can finish slowly over indirect heat.

Filet Mignon

The filet is the tenderness pick, cut from the tenderloin and sold at 0.44 to 0.56 lbs. The maker states the scarcity plainly: an entire 1,200 lb steer or heifer holds only around 12 pounds of tenderloin, which is why this small steak carries the case’s premium position.

The tenderloin sits along the lower back and does almost no work, giving the fine muscle fibers and soft texture the maker describes. What the filet does not have is protection: the maker’s page warns that the cut has little protective fat, and advises cooking it quickly over high heat to an internal temperature of 130 degrees F, since the lack of fat can leave an overcooked filet tough and dry. On the grill that means a fierce, short sear and no wandering off. The butcher sometimes ties these steaks with twine to hold their round shape, a small detail that helps the filet cook evenly. Serve it to the guest who values tenderness over beefy punch, and keep a sauce or compound butter in mind, because the filet’s mildness invites one.

Pros: the most tender cut in this guide; cooks quickly; neat, uniform shape. Cons: mild flavor beside the strip or ribeye; little fat, so overcooking punishes it fast; smallest steak here. Buy if: tenderness is the whole point of the meal. Skip if: you want bold beef flavor or a forgiving cut for a crowd.

Flank Steak

The flank is the group pick: a wide, flat steak of 1.38 to 2.0 lbs cut from the belly, dry aged, and built to be sliced and shared. One flank on the grill feeds the table in a way four small steaks cannot, and it cooks in one piece with one flip to judge.

The maker points at the cut’s structure before anything else: large muscle fibers that must be noted before cooking, because the steak is sliced against the grain after resting. That single habit decides whether a flank eats tender or chewy. The belly location and the dry aging give it a concentrated beef flavor, and the maker notes it takes a marinade well, with one practical warning: wipe the marinade off before the steak meets high heat, so the surface sears instead of burning. Grill it hot and fast, rest it, then slice thin across the grain for tacos, salads, or a steak platter. Of the six cuts here, this is the one where knife work after cooking matters as much as the cooking itself.

Pros: largest steak in the guide; strong beef flavor; one piece feeds several people; takes marinade well. Cons: slicing with the grain ruins the texture; wide shape can cook unevenly at the thin ends. Buy if: you cook for a group and like slicing at the table. Skip if: you want individual steaks with no carving step.

Hanger Steak

The hanger is the butcher’s cut in the literal sense: there is only one per animal, it hangs from the diaphragm, and this butcher sells it as a single piece of 1 to 1.5 lbs with the silverskin left running down the middle, to be separated after cooking.

Because the muscle only supports the diaphragm and does little work, the maker describes it as extremely tender, with a pronounced grain and deep, minerally beef flavor. One honest difference sets it apart in this case: the maker states this is one of the few cuts removed before the dry aging process begins, so it is the only steak here that is not dry aged. The cooking is high and fast, under 10 minutes by the maker’s notes, kept rare to medium rare, then split along the center silverskin into two halves. That built-in dividing line makes portioning simple. Supply is the catch: one steak per animal means the hanger sells through and disappears from butcher lists in a way strip and ribeye never do.

Pros: deep, distinctive beef flavor; tender despite its working-muscle address; cooks in under 10 minutes. Cons: not dry aged, unlike the other five; center silverskin must be cut out after cooking; limited supply. Buy if: you want the cut butchers keep for themselves. Skip if: dry aged flavor is the reason you are shopping this case.

Chuck Eye Steak

The chuck eye is the value pick with a pedigree: the butcher cuts it from the same muscle as the ribeye, at 0.69 to 0.81 lbs, dry aged, and describes the same texture, flavor, and marbling as its famous neighbor, from a shoulder position between the rib section and the chuck.

That address explains both the appeal and the scarcity. The chuck eye sits where the ribeye muscle runs into the shoulder, so it eats like a ribeye while coming from a part of the animal most shoppers ignore. The maker counts only six chuck eye steaks in the entire 1,200 lb animal, so it is a small-production cut even beside the filet. The cooking notes are simple: season with salt, cook over high heat, serve rare to medium rare, and leave the butcher’s twine on during cooking, removing it before eating. On the grill it behaves like the ribeye it resembles, with deep beef flavor from the pasture-raised, dry aged program behind it. For cooks who love ribeye but not ribeye pricing habits, this is the case’s smartest buy.

Pros: ribeye muscle and marbling character; dry aged; simple salt-and-sear cooking. Cons: only six per animal, so availability comes and goes; less widely known, so guests may need an introduction. Buy if: you want ribeye eating at the value end of the case. Skip if: you need a famous-name steak for a special occasion.

Buying guide

Choosing among cuts is easier once the trade-offs are named. Tenderness, marbling, thickness, and slicing each push toward a different steak, and the butcher pages in this guide show how much of that information a good product page should state before you spend anything.

Decide whether tenderness or marbling leads

Every steak in this guide sits somewhere on one line: the filet at the tender, mild end, the ribeye at the rich, marbled end, and the strip in the middle. Naming which end you prefer settles most of the decision, because no cut leads on both measures at once.

Marbling is the fat threaded through the muscle, and it brings flavor and juiciness that survive grilling heat. Tenderness comes from muscles that did little work, like the tenderloin and the diaphragm support behind the hanger. Cooks feeding mixed company often land on the strip or the chuck eye, since both balance the two qualities instead of maximizing one.

Match thickness to your grill habits

Thickness decides how much margin a steak gives you on the grate. The everyday ribeye in this guide is cut at 3/4 inch, which sears in minutes and suits cooks who grill fast on weeknights, while thicker steaks forgive a slower finish away from direct heat.

Thin steaks punish distraction: the gap between medium rare and medium is short, and the maker’s notes for the slim ribeye assume a preheated grill and a quick sear. If your grill time is social and interrupted, choose a thicker or larger cut, like the flank, where the cooking is still fast but the target is wider and the resting slice forgives small errors.

Plan the slicing before you buy

Some of the best grill cuts are not served whole. Flank and hanger both reach the table sliced, and the flank in particular depends on being cut against the grain, a step the maker prints on the product page because it changes the eating texture completely.

If you enjoy carving at the table, those cuts give you large, flavorful steaks that portion to order. If you want each guest handed a whole steak, stay with the strip, ribeye, filet, or chuck eye, which are portioned by the butcher before cooking and need nothing more than a rest before serving.

Read weight ranges like a butcher writes them

Butcher pages state weights as ranges, and the ranges here run from 0.44 to 0.56 lbs for the filet up to 1.38 to 2.0 lbs for the flank. A range is not vagueness; a hand-cut steak is portioned by eye and thickness, so the final weight lands where the knife falls.

Use the range to plan servings honestly. A single flank at the top of its range feeds a group when sliced, while two filets at the bottom of theirs are a light dinner for two. When a page states thickness instead of weight, as the everyday ribeye page does with its 3/4 inch cut, judge the steak by cooking time rather than by ounces.

Ask what the page does not state

A good product page tells you the cut, the size, the aging, and the cooking direction, and its silences matter too. The butcher behind this guide states no USDA grade for any of these six steaks, so a shopper who grades by Prime or Choice labels will find nothing to grade here.

That is not a flaw in the beef; it is a different system, built on pasture raising and dry aging rather than on a federal grade stamp. The lesson travels: buy on the facts the page actually prints, and treat any missing fact, grade, weight, or aging time, as a question to ask the butcher rather than a detail to assume.

FAQ

Most cut questions at the butcher counter come down to forgiveness, timing, and what to serve a group. The answers below use the weights, thicknesses, and cooking notes from the six product pages in this guide, plus plain butcher-counter logic where the pages stay general.

What is the most forgiving cut of streak for grills?

The NY Strip takes that title here. Its fat cap protects one face of the steak, its body is thick enough to sear without racing, and the maker aims it at a clear target of 130 degrees F for medium rare, which gives a new grill cook a number to cook to.

The filet is the least forgiving, since its lack of protective fat means a short distraction shows up in the eating. The flank forgives in a different way: sliced thin against the grain, small doneness errors across its wide shape matter far less than they do in a whole steak served unsliced.

Which cut should I buy for a group?

The flank, at 1.38 to 2.0 lbs, is the group answer in this guide. One piece grills at once, rests once, and slices into portions for tacos, salads, sandwiches, or a shared platter, and its strong beef flavor holds up next to sauces, salsas, and grilled onions.

The hanger is the smaller group option at 1 to 1.5 lbs, split along its center silverskin into two halves after cooking. For a group that wants individual steaks instead, the strip and chuck eye at 0.69 to 0.81 lbs each are the straightforward multiples to order.

Does dry aging change how a steak grills?

Five of the six cuts here are dry aged, and the maker’s pages credit the aging with concentrated, steakhouse-style flavor. The cooking method does not change: the same high heat, quick sear, and rest apply, because aging works on flavor and texture before the steak ever meets the grate.

The hanger is the exception that proves the point. The maker removes it before aging begins, and its page leans instead on the cut’s natural tenderness and minerally depth. If your interest in a steak is the aging itself, the strip, ribeye, filet, flank, and chuck eye are the five to choose among.

Why is the chuck eye cheaper in spirit than the ribeye?

Because of its address, not its eating quality. The chuck eye is cut from the same muscle as the ribeye, as the maker’s page states, but it comes from the shoulder end where that muscle meets the chuck, a section shoppers associate with roasts rather than steaks.

Butchers can only take six of them from a 1,200 lb animal, so the cut is scarce as well as overlooked. On the grill it sears and rests like the ribeye it resembles, seasoned with salt over high heat by the maker’s notes, which is why experienced cooks treat it as the case’s quiet bargain.

What internal temperature do these cuts want?

The maker’s cooking notes give the same answer for the strip, the ribeye, and the filet: 130 degrees F, described on the pages as medium rare. The chuck eye is aimed at rare to medium rare, and the hanger is kept rare to medium rare across its under 10 minutes of cooking.

Those figures are the butcher’s guidance for these specific cuts, not a general rule for all beef. A leave-in thermometer, checked in the thickest part of the steak, is how a grill cook actually lands on the number instead of guessing from time or color.

Conclusion

Start with the NY Strip if you want one steak that does everything well, and the Everyday Boneless Ribeye when marbling matters most. Add the flank for groups and the hanger for deep beef flavor, and let the filet and chuck eye cover tenderness and value at the two ends of the case. Every cut here carries the maker’s own grilling tag.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.