Updated Nov 15, 2026· 13 min read

Key takeaways

  • Six 36 inch cooktops with downdraft ventilation compared on fuel, vent CFM and cutout fit, with radiant, gas and induction models from JennAir and KitchenAid.

A 36 inch island cooktop has no wall for a hood, so the vent has to live inside the cooktop itself. This guide covers 36 cooktops with downdraft ventilation that are listed for sale now: six models in radiant electric, gas and induction, compared on vent ratings, element or burner output, and cutout fit.

Quick verdict

Pick the KitchenAid KCGD506GSS for gas cooking with the strongest burner pair, the JennAir JED3536GS for a radiant surface with a triple-size element, or one of the two new induction models, KitchenAid KCID936SBL and JennAir JIDT836SBL, for automatic extraction and flush installation.

The radiant pair and the gas pair share older, proven layouts with three-speed fans rated at 300 to 310 CFM. The induction pair is newer: both add automatic fan adjustment, bridge zones for long pans, and published airflow figures above 330 CFM. Gas buyers get only two choices, one per brand, and both carry the same burner layout pattern of a high-output burner at right rear.

  • Strongest gas burners: KitchenAid KCGD506GSS and JennAir JGD3536GS, each led by a 17,000 BTU burner
  • Highest published airflow: JennAir JIDT836SBL, 345 CFM Motor Class extraction
  • Only radiant model with a triple-size element: JennAir JED3536GS, 12, 9 and 6 inch rings
  • Lightest models: the two induction cooktops, 46 lb each per maker documents
  • Duct-free option: all six list a conversion or recirculation path, with kits sold separately
Product Fuel Zones Vent rating Main limit
JennAir JED3536GS Electric radiant 5 elements 310 CFM Motor Class, 3 speeds Maker prints two CFM figures, 297 and 310
JennAir JGD3536GS Gas 5 burners, up to 17,000 BTU 310 CFM Motor Class, 3 speeds Maker prints two CFM figures, 297 and 310
KitchenAid KCED606GSS Electric radiant 5 elements 300 CFM, 3 speeds NextGen replacement now exists; confirm stock
KitchenAid KCGD506GSS Gas 5 burners, up to 17,000 BTU 300 CFM, 3 speeds Duct-free kit not included
KitchenAid KCID936SBL Induction 4 zones, bridge 332 cfm airflow Four zones only; needs magnetic pans
JennAir JIDT836SBL Induction 4 zones, flex bridge 345 CFM Motor Class New model; one US listing shows preorder

How we selected

Selection started from maker product pages, maker spec sheets and maker manuals. A model stayed in only when an opened document confirms all three facts for the same model number: a 36 inch width class, a built-in downdraft vent, and a current listing or in-stock status on a maker or listing page.

That check is why the group holds six models and not more. The 36 inch downdraft class is narrow: two brands supply every current model found, and several older 36 inch downdraft cooktops from other brands no longer appear in maker lineups. Finish variants of the same model, such as a black version of a stainless cooktop, are counted once. The 30 inch versions of these same series are a different size class and are not counted here. One more pattern is worth naming at the start: the four older models are all Whirlpool-family designs with knob control, while the two induction models arrived as a newer platform with touch control, so this class is really two generations sharing one size and one vent idea.

Six 36 cooktops with downdraft ventilation, model by model

Four of the six are five-zone layouts with knob control and three-speed fans; the two induction models are four-zone layouts with touch control and automatic extraction. Fuel decides the shortlist first, then vent rating and cutout, since no two brands here share the same opening size.

JennAir JED3536GS: radiant glass with a triple-size element

The JennAir spec sheet for this 36 inch radiant model lists five elements on ceramic glass, a JX3 downdraft system with three speeds and perimetric extraction, and a Triple-Choice element that runs at 12, 9 or 6 inches, the most flexible single element in this group.

Element ratings on the sheet read 3,200 watts for the 10 inch center front element, 3,000, 1,950 or 1,050 watts for the triple element at right rear depending on the ring in use, 1,800 watts for the 8 inch left rear, 1,300 watts for the 6 inch left front and 1,200 watts for the 6 inch center rear. The sheet lists the surface treatment as DuraFinish glass protection, die-cast metal knobs, and conversion to duct-free ventilation with an optional kit.

One figure needs care: the feature text describes a 297 CFM Motor Class blower, while the specification table lists CFM Motor Class 310. Both numbers come from the maker, so confirm the rating that applies to a production unit before comparing it against the 300 CFM KitchenAid models. The sheet gives a width of 36-5/16 inches, a net weight of 31.30 kg, a 40 amp circuit, and ADA compliance.

  • Pros: triple-size element; perimetric extraction; duct-free conversion listed
  • Cons: maker prints conflicting CFM figures; radiant glass shows wear over time
  • Buy if: you cook with many pan sizes on a glass surface
  • Skip if: you want the fan to adjust itself

JennAir JGD3536GS: the JennAir gas option, LP kit included

The maker page for this 36 inch gas model lists five sealed burners topped by a 17,000 BTU ultra-high output burner at right rear, brass burners with a removable base, and the same JX3 downdraft system with three speeds as the radiant model above it in this guide.

Burner ratings read 17,000 BTU at right rear, 15,000 BTU at center front, 12,500 BTU at center rear, 10,000 BTU at left front and 5,000 BTU at left rear, where an Even-Heat burner with a melt cap handles delicate sauces. The page lists flame-sensing re-ignition, continuous cast iron grates, and LP conversion with the kit included, the clearest propane statement among the gas models here.

The CFM conflict follows this model too: feature text cites a 297 CFM Motor Class blower and the specification block lists CFM Motor Class 310. The page gives a width of 91.44 cm, a net weight of 36.56 kg, duct-free conversion with an optional kit, and ADA compliance. DuraFinish protection is listed for the surface, and the burners are brass, which the maker says can be removed for cleaning.

  • Pros: LP kit included; brass burners; melt cap for low heat
  • Cons: maker prints conflicting CFM figures; heaviest gas model here
  • Buy if: your home runs on propane and you cook with gas
  • Skip if: you need a published single CFM figure for a permit

KitchenAid KCED606GSS: radiant elements with Even-Heat simmer and melt

The KitchenAid spec sheet for this 36 inch radiant model lists five elements, downdraft ventilation with a 300 CFM exhaust rating and a 3-speed fan, a 10 inch Even-Heat Ultra element with simmer settings, and a 6 inch Even-Heat element with a melt setting.

The sheet also lists a 12 and 9 inch double-ring element, a CookShield finish for the glass surface, pure color ceramic glass, stainless steel knobs, power-on and hot-surface indicator lights, and conversion to duct-free ventilation. The element set is aimed at control rather than raw wattage: the Ultra element’s simmer settings and the small element’s melt setting cover the low end that big radiant elements handle poorly.

Two points belong in a purchase check. The maker’s own manual for the newer induction line names this model among the cutouts its replacement fits, so the design is a generation old even though listings still stock it. The opened spec sheet is partly hard to read in its dimension block, so confirm the full dimensions and element wattages on the maker’s current page before ordering.

  • Pros: melt and simmer settings on radiant elements; 300 CFM fan
  • Cons: older generation; some spec figures need re-confirmation
  • Buy if: you melt and simmer often on a radiant surface
  • Skip if: you prefer the newest induction platform

KitchenAid KCGD506GSS: gas burners led by 17,000 and 15,000 BTU

The KitchenAid page for this 36 inch gas model lists five burners, downdraft ventilation at a 300 CFM exhaust rating with 3-speed fan control, and two professional burners, one at 17,000 BTU and one at 15,000 BTU, and shows the model in stock on the maker site.

Low heat is covered by a 5,000 BTU Even-Heat simmer burner with a diffuser plate, plus a melt cap that shields and diffuses the flame for gentler heat. The page lists full-width cast-iron grates, stainless steel knobs, electronic ignition with automatic re-ignition, and an LP conversion kit for propane use. Venting can be ducted outside or filtered and recirculated.

The limit is in the conversion details: the duct-free conversion kit is not included, so a ductless island install adds a separate kit purchase to the plan. Against the JennAir gas model, this KitchenAid trades the included LP kit statement for a plainer 300 CFM rating with no conflicting second figure, and its burner pair is the strongest one-two in the group.

  • Pros: strongest professional burner pair; in stock on the maker page
  • Cons: duct-free kit not included; no brass burner trim
  • Buy if: burner output is your first filter for a gas downdraft
  • Skip if: you need duct-free venting working on delivery day

KitchenAid KCID936SBL: induction with automatic extraction and a bridge zone

The maker page and manual for this 36 inch KitchenAid describe a four-zone induction cooktop with a built-in extractor: the fan adjusts automatically to the highest power level in use, and the manual rates airflow at 332 cfm with a grease absorption rate of 98.2 percent.

Zone outputs in the manual read 2,300 watts at front left with a 3,000 watt power setting, 1,400 watts at rear left with 2,100 watts on the power setting, and 2,100 watts at each right zone with 3,000 watt power settings. The right pair forms the Bridge XL Even-Heat Zone for long pans and griddles. Assisted presets hold 108 degrees F for melting, 165 degrees F for keeping sauces warm and 201 degrees F for simmering.

The manual gives a maximum power draw of 8.0 kW on a 240 volt, 40 amp supply, dimensions of 36-3/8 by 22 by 7-13/16 inches, a weight of 46 lb and a cutout width of 34-1/4 inches. The design is frameless for flush installation, the grease filter is listed for dishwasher cleaning, and the model carries Energy Star certification. It needs magnetic cookware, as every induction model does.

  • Pros: automatic fan; bridge zone; lowest weight in the group
  • Cons: four zones only; recirculation kit sold separately
  • Buy if: you want induction speed with a self-adjusting vent
  • Skip if: your pans are aluminum or copper without magnetic bases

JennAir JIDT836SBL: flex zones and the highest extraction rating

The JennAir reference guide for this 36 inch induction model lists four 9 by 9 inch zones, each rated 3,000 watts with Boost, Flex-Choice XL flex zones with automatic bridging, and extraction rated at 345 CFM Motor Class, the highest vent figure published in this group.

The guide lists true flush installation, automatic pan detection, and both recirculating and vented operation, with the recirculation kit W11751835 sold separately. Sound level is printed as 30 dBA at level 1, the only noise figure any maker publishes here. Dimensions are 36-5/16 inches wide, 7-7/8 inches high and 22-1/16 inches deep, on a 40 amp circuit, with Energy Star, UL and ADA compliance listed.

Availability needs a check before planning around it, since the model is new to the lineup and listing status varies by seller and country. The JennAir manual for the platform rates measured airflow at 333.3 cfm, close to the KitchenAid induction figure, so the 345 CFM Motor Class headline and the measured airflow describe the same system in different terms.

  • Pros: highest extraction rating; published noise figure; flush fit
  • Cons: US availability unsettled; recirculation kit separate
  • Buy if: extraction strength leads your decision
  • Skip if: your remodel date cannot move

Buying guide

With only six models in the class, the buying work is less about choosing a brand and more about matching fuel, vent path and cutout to the kitchen you have. These five checks run in the order that rules models out fastest, from the fuel supply to the duct route under the floor.

Start with fuel: radiant, gas or induction

Fuel splits the six into three pairs. Radiant models keep any flat-bottom pan in play and give the lowest step into the class. Gas models give visible flame control and the strongest single burners. Induction models heat fastest and add automatic extraction, but every pan needs a magnetic base to register on the zones.

Check the supply that already reaches the island. The electric models here need a 40 amp circuit; the JennAir radiant sheet lists 220 volts and 40 amps, and both induction manuals call for 240 volts and a 40 amp breaker. A gas line plus a standard outlet serves the gas pair. Changing fuel type inside an island usually means more trades work than the difference between models ever justifies.

Read CFM figures with care

Vent ratings in this class are not measured one way. KitchenAid prints a plain 300 CFM exhaust rating for its older pair. JennAir prints a CFM Motor Class figure, and its own documents give two different numbers, 297 and 310, for the same JX3 system, while the new induction manuals print measured airflow of 332 to 333.3 cfm.

Treat the figures as a rough band, all six sitting between 297 and 345, rather than a precise ranking. Cooking style matters more: frequent searing and frying produce more grease than the same cooktop used for pasta and sauces, and a ducted route outside will always clear air better than recirculation through a filter, whatever the rating says.

How duct-free conversion works on 36 cooktops with downdraft

Every model here can run without a duct to the outside. The radiant and gas models convert with a duct-free kit, and the induction models switch to recirculation with a charcoal filter kit. In each case the kit is sold separately, and the filtered air returns to the kitchen instead of leaving the house.

Recirculation handles odors and some grease but does not remove heat or moisture from the room, and the charcoal filters are a recurring replacement item. Where a duct route exists, even a short one through the floor joists, ducted venting is the stronger choice. Where the island sits on a slab with no route out, conversion is what makes the layout possible at all.

Measure depth and height, not just width

All six headline 36 inches, yet the bodies differ underneath. The induction models stand 7-13/16 to 7-7/8 inches tall because the extractor sits below the glass, and the KitchenAid induction manual prints a cutout width of 34-1/4 inches, narrower than its 36-3/8 inch top, because the frameless design overlaps the counter.

Check three things against the maker sheet for the exact model: the cutout width and depth, the cabinet depth left below the unit for the blower and duct turn, and whether an undercounter oven is ruled out, since both induction manuals state that a built-in oven cannot be installed under the cooktop. Island cabinets with drawers near the top often lose the top drawer to the blower housing.

Plan the vent path before the countertop is cut

A downdraft blower moves a large volume of air through a cabinet and, usually, a floor. Duct size, the number of elbows and the total run length all cut into real airflow, and maker manuals set maximum equivalent lengths for their vent systems, so the route has to be planned, not improvised.

Decide the route, out through the floor and wall or recirculating inside the cabinet, before the countertop fabricator cuts the opening, because the cutout position shifts with the vent layout on some models. A qualified HVAC or appliance installer should confirm the route against local code, as the JennAir guide itself recommends professional help for ducting decisions.

FAQ

Answers to the questions that come up most in this small class, covering whether more brands exist, how the two CFM styles compare, what happens to the oven below, and whether older radiant models are still worth buying against the new induction pair.

Are there other brands selling 36 cooktops with downdraft?

Not that maker lineups currently show. Every 36 inch downdraft cooktop found in this research comes from JennAir or KitchenAid, in radiant, gas and induction forms. Older 36 inch downdraft models from other brands have left maker lineups, so a like-for-like replacement search should start with the six models above and their 30 inch siblings.

Is 300 CFM enough for a 36 inch cooktop?

For most home cooking, the makers rate these systems for the job: KitchenAid describes its 300 CFM rating as handling the venting needs of pan searing and stir-frying. Downdraft systems capture at the surface, close to the pan, which helps them work at lower ratings than an overhead hood mounted well above the cooking surface.

Can a wall oven go under a downdraft cooktop?

It depends on the model, and the answer is printed on the spec documents. Both induction manuals state that an undercounter built-in oven cannot be installed under the cooktop, and the JennAir radiant sheet lists installs over built-in oven as No. The blower housing takes the space an oven would need, so plan a separate oven location.

Do the induction models need special pans?

They need pans with a magnetic base: multi-ply stainless steel, enameled steel or cast iron, as the KitchenAid page puts it. Aluminum and copper pans work only with an iron or steel base layer. The makers suggest the magnet test: if a magnet sticks firmly to the pan base, the pan will register on an induction zone.

Radiant or induction: which downdraft type is easier to live with?

Radiant models accept every flat-bottom pan and use familiar knob control, but their glass holds heat after cooking and their fans run at fixed speeds. Induction models heat the pan directly and adjust the fan automatically, with pan limits and a taller body under the counter as the trade-offs.

Conclusion

Six models carry the whole 36 inch downdraft class. Gas cooks should take the KitchenAid KCGD506GSS for its burner pair, radiant loyalists the JennAir JED3536GS, and everyone else should look first at the induction pair, where automatic extraction and airflow above 330 cfm move the class forward for island kitchens.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.