Key takeaways
- Compare seven electric cooktops with downdraft venting, from new induction models by JennAir, KitchenAid and Elica to a radiant GE Profile, on specs alone.
An island or peninsula counter has no wall behind it, so a hood has nowhere to hang and cooking steam drifts across the room instead. This guide compares electric cooktops with downdraft extraction built into the cooktop body, seven models in all, on element power, fan ratings, ducting options and the circuit each model needs.
Quick verdict
The short answer is that this category has changed shape in one product cycle. Six of the seven models below use induction elements with the fan built into the cooktop body, and only the GE Profile entry still pairs a radiant glass surface with knobs and a downdraft vent.
For a 30 inch cutout, the JennAir JIDT730SBL and the KitchenAid KCID930SBL bring automatic bridging, pan detection and extraction rated at 345 CFM and 332 cfm by their makers. The Elica NikolaTesla Flux pair rates its internal blower at 600 CFM, the highest figure in this group, and adds an automatic extraction mode the maker calls Airmatic. Buyers who cook on radiant elements, or who want physical knobs, have exactly one current entry here, the GE Profile PP9830DRBB with a 400 CFM downdraft and a bridge element. Every model in the table needs a 40 amp circuit except the Elica pair, which the maker rates at 34.5 amps.
| Model | Width | Surface | Elements | Extraction rating | Circuit |
|---|---|---|---|---|---|
| JennAir JIDT730SBL | 30 inch | Induction | 4 | 345 CFM | 40 amp |
| JennAir JIDT836SBL | 36 inch | Induction | 4 | 345 CFM | 40 amp |
| KitchenAid KCID930SBL | 30 inch | Induction | 4 | 332 cfm | 40 amp |
| KitchenAid KCID936SBL | 36 inch | Induction | 4 | 332 cfm | 40 amp |
| Elica NikolaTesla Flux ENF430BL | 30 inch | Induction | 4 | 600 CFM | 34.5 amp |
| Elica NikolaTesla Flux ENF436BL | 36 inch | Induction | 4 | 600 CFM | 34.5 amp |
| GE Profile PP9830DRBB | 30 inch | Radiant | 4 plus bridge | 400 CFM | 40 amp |
How we selected
Three rules shaped this list. The fan has to sit inside the cooktop body rather than in a separate telescoping vent behind it, each model has to appear in its maker lineup with a full published specification, and no model from the earlier radiant-only generation repeats here unless it still anchors the category.
Those rules leave a short, honest field. The JennAir and KitchenAid entries are the newest generation of downdraft induction, built on shared dimensions and near-identical zone layouts. Elica builds its NikolaTesla Flux line around a central extraction inlet flanked by induction zones. The GE Profile radiant model stays on the list because it is the one knob-controlled option and because its maker still publishes a complete specification for it. Models that pair an ordinary induction cooktop with a separate pop-up vent were left out, since the vent is a second appliance with its own cutout, its own duct run and its own controls.
Electric cooktops with downdraft worth comparing
Seven models follow, ordered by width and then by maker. Each entry sticks to figures its maker publishes, including extraction ratings, element wattages, overall dimensions and electrical needs, so the entries can be compared line by line against the table above and against your own cutout measurements.
JennAir JIDT730SBL 30 inch downdraft induction cooktop
The JIDT730SBL opens the new JennAir downdraft induction line at 30 inches wide, with four induction elements, extraction the maker rates at 345 CFM Motor Class, and a published sound level of 30 dBA at the lowest fan level, the quietest low-speed figure in this group.
The maker lists overall dimensions of 30-7/8 inches wide, 7-7/8 inches high and 22-1/16 inches deep. The left front element measures 8 inches and is rated at 3000 watts with Boost, the left rear measures 7 inches at 2100 watts with Boost, and both right side elements are 9 by 9 inch zones rated at 3000 watts with Boost. Automatic bridging joins zones for long pans, and automatic pan detection is listed as standard. JennAir describes the extraction as working five times faster than steam can rise, a maker claim worth reading as positioning rather than as a measured figure. The cooktop supports true flush installation, vents outside or recirculates with kit W11751835 sold separately, and runs on a 120/240 volt, 40 amp circuit. The maker reference guide lists Energy Star, UL, ADA and California Title 24 compliance for the model.
JennAir JIDT836SBL 36 inch downdraft induction cooktop
The 36 inch JennAir keeps the same extraction rating, the same control set and the same circuit needs as its 30 inch sibling, and spends the extra width on four equal 9 by 9 inch elements, a layout that suits households running two large pans side by side on a regular basis.
Overall dimensions are 36-5/16 inches wide, 7-7/8 inches high and 22-1/16 inches deep. All four elements are 9 by 9 inch zones rated at 3000 watts with Boost, so no corner of the surface is a low-power corner. Extraction stays at 345 CFM Motor Class with the same 30 dBA figure at level 1, and the feature list again includes automatic pan detection, automatic bridging and true flush installation. Venting runs outside or recirculates through kit W11751835, sold separately, and an optional 36 inch frame, W11751837, is listed for installations that do not sit flush. Electrical needs match the smaller model at 120/240 volts on a 40 amp circuit, and the maker guide lists the same Energy Star, UL, ADA and California Title 24 compliance.
KitchenAid KCID930SBL 30 inch downdraft induction cooktop
KitchenAid answers at 30 inches with the KCID930SBL, a four-zone induction cooktop with tap touch controls, a Bridge XL Even-Heat Zone that links zones for long cookware, and an extractor the maker manual rates at 332 cfm with grease absorption of 96.3 percent.
The maker specification sheet lists dimensions of 30.86 inches wide, 22.05 inches deep and 7.83 inches high. The manual gives the front zone at 8-1/4 inches and 2300 watts, rising to 3000 watts on the power setting, and the rear zone at 6-7/8 inches and 1400 watts, rising to 2100 watts. Maximum power is 8.0 kW on a 40 amp fuse, and the unit weighs 42 lbs. Controls are a central touch panel with a slider, control lock, pause and heat retention, plus assisted cooking presets from the feature list. The extractor runs nine levels plus a power level, with an automatic extractor function, an automatic after-run and a filter service display. One planning limit matters: the maker manual states that an undercounter built-in oven cannot be installed under this cooktop. Venting is external or recirculating with a charcoal filter, and the manual lists EnergyStar certification.
KitchenAid KCID936SBL 36 inch downdraft induction cooktop
The KCID936SBL stretches the KitchenAid layout to 36 inches and changes the zone mix, pairing the same smaller left side zones with two larger 9-1/16 inch square zones on the right, each rated at 2100 watts and 3000 watts on the power setting, for a rated total of 8.0 kW.
The maker manual lists the 36 inch model at 46 lbs, with the front left zone at 8-1/4 inches and 2300 watts, the rear left at 6-7/8 inches and 1400 watts, and both right zones at 9-1/16 by 9-1/16 inches and 2100 watts, each rising to 3000 watts on the power setting and 2100 watts on the smaller zones. Extractor airflow matches the 30 inch model at 332 cfm, while grease absorption rises slightly to 98.2 percent in the manual table. The control set carries over in full: tap touch controls with a slider, Bridge XL Even-Heat Zone with automatic bridge, assisted cooking presets, automatic extractor function, filter service display, control lock and hot surface indicator. The same installation limit applies, since the manual states a built-in oven cannot sit under this cooktop either. Electrical supply is 240 volts on a 40 amp fuse, and EnergyStar certification is listed.
Elica NikolaTesla Flux ENF430BL 30 inch downdraft induction cooktop
Elica takes a different route with the NikolaTesla Flux ENF430BL, placing the extraction inlet in the middle of the surface and rating the internal blower at 600 CFM, well above the JennAir and KitchenAid figures, with four fan speeds and a noise range of 1.5 to 6.8 sones.
The maker specification sheet lists dimensions of 30 inches wide, 22-9/16 inches deep and 10-3/16 inches high, the tallest body in this group, with a self-rimming cutout of 28-3/4 by 21-1/8 inches. Four cooking zones each measure 7-1/2 by 7.9 inches, with ten heating levels: level 9 is rated at 2100 watts and the booster at 3700 watts. Electrical supply is 220 volts at 7.7 kW and 34.5 amps, the lowest circuit demand here. Controls are electronic glass touch and slide with red illumination. The feature list runs long: Airmatic adjusts extraction on its own, bridge zones join pairs of zones, pot self-detection, stop and go, a temperature manager, a timer, child lock, a delay switch off and a CFM reduction system all appear. Installation is ducted out or recirculating with kit KIT0192385, which holds two ceramic carbon filters. The surface is tempered ultra deep black ceramic glass, 4 mm thick, over a four-layer black anodized aluminum mesh grease filter. Warranty cover is two years parts and in-home labor, plus one year with registration.
Elica NikolaTesla Flux ENF436BL 36 inch downdraft induction cooktop
The ENF436BL is the 36 inch version of the Elica design, holding the same 600 CFM internal blower, the same four-zone layout and the same electrical rating, and widening the body and the cutout for kitchens that have the counter run to spare for a broader cooking surface.
Dimensions are 36 inches wide, 22-9/16 inches deep and 10-3/16 inches high, with a self-rimming cutout of 34-9/16 by 21-1/8 inches. The four zones keep the 7-1/2 by 7.9 inch size, the ten heating levels and the 2100 watt level 9 rating with a 3700 watt booster. Ventilation keeps four speeds, the 1.5 to 6.8 sone noise range and the choice of ducted installation or recirculation through kit KIT0192385 with its two ceramic carbon filters. Airmatic automatic extraction, bridge zones, pot self-detection, stop and go, the temperature manager, child lock and the CFM reduction system all carry over from the 30 inch sheet. The finish is the same tempered ultra deep black ceramic glass at 4 mm, and the warranty matches at two years parts and in-home labor, plus one year with registration. Electrical demand stays at 220 volts, 7.7 kW and 34.5 amps, so the wider model asks nothing more of the circuit than the narrower one.
GE Profile PP9830DRBB 30 inch radiant downdraft cooktop
The GE Profile PP9830DRBB is the radiant holdover and the only knob-controlled model in this group, with four ribbon elements under patterned black glass, a bridge element for long pans, and a downdraft exhaust the listing rates at 400 CFM across three fan speeds.
The listing gives the left front and left rear elements at 7 inches and 1800 watts each, the right front as a 9 inch and 6 inch dual element with a 3000 watt Power Boil rating, and the right rear at 6 inches and 1500 watts. The bridge element adds 800 watts between the left pair. Controls are infinite heat rotary knobs at the front center, with a control lock, four hot surface indicator lights and an element on light. Electrical demand is 40 amps at 208 or 240 volts, with a connected load of 9.1 kW at 240 volts. Width is 29.75 inches, the cutout is 28-7/8 by 20-5/8 inches, and the unit weighs 45 lbs. Exhaust noise is rated at 7.0 sones on high speed. Warranty cover is a limited one year on the entire appliance. Shoppers set on knobs, or replacing an older radiant downdraft in the same cutout family, will find this the natural comparison point against the induction models above.
Buying guide
Four checks decide most purchases in this category: the cutout already in the counter, the duct path under the floor or through the cabinet, the circuit waiting in the panel, and the way the cook in the house prefers to set heat, by touch slider or by turning a knob.
Sizing electric cooktops with downdraft to your cutout
Start with the opening already cut in the counter, because downdraft bodies run deeper and taller than standard cooktops. The Elica models stand 10-3/16 inches high, the JennAir and KitchenAid bodies sit near 7-7/8 inches, and each maker publishes its own cutout window for width and depth.
Measure the existing opening at its narrowest points and compare it against the maker sheet for the exact model, not against the nominal 30 or 36 inch class. The GE Profile cutout of 28-7/8 by 20-5/8 inches differs from the Elica self-rimming cutout of 28-3/4 by 21-1/8 inches by enough to matter. JennAir also lists true flush installation for its pair, which asks for a routed counter edge rather than a simple drop-in opening, so confirm the counter material and the fabricator before choosing that route.
Ducted or recirculating extraction
Every induction model here can run without a duct run, but the recirculating kits are separate purchases with their own part numbers. JennAir lists kit W11751835 for both of its models, Elica lists kit KIT0192385 with two ceramic carbon filters, and KitchenAid lists recirculating venting with a charcoal filter.
Ducted installation sends steam and grease outside, while recirculating returns filtered air to the room and asks for filter changes on the maker schedule. The KitchenAid models add a filter service display that flags when attention is due. Extraction ratings differ in kind as well as size: JennAir quotes 345 CFM Motor Class, KitchenAid quotes 332 cfm of extractor airflow with grease absorption above 96 percent, Elica quotes a 600 CFM internal blower, and GE quotes 400 CFM for the radiant model. Treat the figures as maker ratings for comparison inside this group rather than as a promise about a specific kitchen.
Element layout and boost power
Zone shape matters as much as wattage. The JennAir 36 inch model runs four equal 9 by 9 inch zones, the KitchenAid 36 inch model mixes two smaller left zones with two larger right zones, and the Elica pair uses four equal rectangular zones that bridge in pairs for griddles and long pans.
Boost figures decide how fast a large pot moves. JennAir rates every zone at 3000 watts with Boost on the 36 inch model, KitchenAid rates its power setting at 3000 watts on three of four zones across the pair, and Elica rates its booster at 3700 watts, the highest single figure here. The GE radiant model answers with a 3000 watt Power Boil dual element and an 800 watt bridge. Households that boil pasta water daily will feel these differences more than households that mostly simmer and saute.
Circuit size and installation limits
Six of the seven models ask for a 40 amp circuit, and the Elica pair asks for 34.5 amps at 220 volts, so most replacement projects reuse the existing cooktop circuit. Total connected load runs from 7.7 kW for the Elica models to 9.1 kW at 240 volts for the GE Profile radiant model.
Two limits deserve attention before ordering. The KitchenAid manual states plainly that a built-in oven cannot be installed under the KCID930SBL or the KCID936SBL, which rules out a common stacked layout for those two models. Body height also eats cabinet space: the Elica models need more than ten inches below the counter surface, against roughly eight inches for the JennAir and KitchenAid bodies. Measure the drawer or cabinet run under the cutout, and allow for the duct path or the recirculating kit in the same space.
Controls, cleaning and filters
Control style splits the group cleanly. The GE Profile uses rotary knobs at the front center, the KitchenAid pair uses a central touch panel with a slider, the Elica pair uses touch and slide controls with red illumination, and the JennAir pair uses touch controls with automatic pan detection and automatic bridging.
Glass surfaces wipe down with no grate removal, which is the daily cleaning gain of this category. The ongoing task is the grease filter: KitchenAid fits a filter the maker lists for dishwasher cleaning and adds a service display, Elica uses a four-layer black anodized aluminum mesh filter, and every recirculating setup adds charcoal or ceramic carbon filters that need periodic replacement. Control locks appear on the KitchenAid and GE models, and child lock on the Elica pair, which matters in houses where small hands explore the counter edge.
FAQ
Five questions come up in nearly every downdraft purchase: how the built-in fan compares with a hood, what happens without a duct run, which circuit the cooktop needs, what can sit under the counter below it, and how induction and radiant versions differ in daily cooking.
How strong is a built-in downdraft fan next to a hood?
Maker ratings in this group run from 332 cfm for the KitchenAid extractor to 600 CFM for the Elica internal blower, with JennAir at 345 CFM Motor Class and GE at 400 CFM. Those figures sit in the same range as many residential hoods, though a hood captures rising steam over a wider area by design.
The honest comparison is about capture position. A downdraft pulls air down at the surface, close to the pan, and works hardest on the rear zones nearest the inlet. A hood pulls up from above the whole surface. Kitchens that fry often at the front zones may still prefer a hood where the layout allows one, while island layouts often have no practical hood path at all.
Can these cooktops run without ductwork?
Yes for the induction models, with the right kit. JennAir lists recirculating operation with kit W11751835 sold separately, Elica lists recirculating installation with kit KIT0192385 and its two ceramic carbon filters, and KitchenAid lists external or recirculating venting with a charcoal filter option.
The GE Profile listing describes a ducted downdraft exhaust and does not list a recirculating kit, so plan on a duct path for that model. Recirculating setups return filtered air to the room, which handles grease on the filter while steam still enters the kitchen air. Filter replacement follows the maker schedule for each kit, and the KitchenAid models flag the interval on a filter service display.
What circuit does a downdraft cooktop need?
The JennAir pair, the KitchenAid pair and the GE Profile each call for a 40 amp circuit, at 120/240 volts for the JennAir models and 240 volts for the KitchenAid models. The Elica pair is the exception, rated at 220 volts and 34.5 amps with a total draw of 7.7 kW across both widths.
Connected load is the figure to hand an electrician: 8.0 kW for each KitchenAid model, 9.1 kW at 240 volts for the GE Profile, and 7.7 kW for each Elica. Most houses that already run an electric cooktop have a 40 amp line in place, which covers every model here, but the panel schedule and the existing breaker should be confirmed against the maker sheet before the old unit comes out.
Can a wall oven sit under a downdraft cooktop?
For the KitchenAid KCID930SBL and KCID936SBL, the maker manual answers no: it states that an undercounter built-in oven cannot be installed under either model. That single line rules out the stacked layout for the KitchenAid pair and should be settled before any cabinet order is placed.
The other makers do not publish the same blanket statement in the material covered here, so the answer for JennAir, Elica and GE models comes from each installation guide and its clearance figures. Body height is the practical limit in most cabinets: the Elica models stand 10-3/16 inches tall, and the duct or recirculating kit shares the same under-counter space as any drawer or oven below.
Induction or radiant for a downdraft replacement?
Induction models heat the pan directly and publish boost ratings up to 3700 watts on the Elica booster and 3000 watts across the JennAir and KitchenAid power settings. Radiant elements heat the glass first, and the GE Profile answers with a 3000 watt Power Boil dual element, a bridge element and rotary knobs.
The deciding factors are usually cookware and habit. Induction needs pans with a magnetic base, and every model here includes pan detection that reflects that. Radiant glass accepts any flat-bottom pan already in the cupboard. Buyers replacing an older radiant downdraft often stay with the GE Profile for the knobs and the familiar cutout family, while buyers starting fresh lean toward induction for the boost figures and the automatic extraction modes.
Conclusion
Pick by cutout, circuit and control style first, and by extraction rating second. The JennAir and KitchenAid pairs lead on automation, Elica leads on blower rating, and the GE Profile keeps the knob-controlled radiant option alive for one more generation of island and peninsula kitchens in this class.