Key takeaways
- Six gas cooktops the makers list for liquid propane use, with included LP conversion kits, burner BTU maps, cutout sizes and simmer burners compared in full.
A propane-fed kitchen needs a cooktop the maker rates for LP gas, and the six 30-inch gas models below earn their place because each maker lists an LP conversion kit or an LP rating. This roundup of cooktops for liquid propane compares burner maps, simmer burners, grates and cutouts, so the conversion starts from a model documented for tank gas.
How we selected cooktops for liquid propane
Every model in this guide passed the same test: an opened product page or maker document states that the cooktop can run on liquid propane, through an included conversion kit, a listed LP rating or a stated conversion capability. Models with no LP statement were left out, however strong their burner lineups looked.
The six picks are all 30-inch built-in gas cooktops, the size that dominates propane installations in homes without a natural gas line, from rural houses to cabins and manufactured homes. Within that shared size the group still spreads widely: four-burner and five-burner layouts, strongest burners from 15,000 to 18,000 BTU, and three different LP paths, from kits packed in the box to a conversion capability the maker lists for the model. Each entry below names the LP evidence first and the cooking hardware second, because for this keyword the fuel question comes before everything else.
Kit included, kit capable and LP rated: reading the labels
Makers describe LP readiness in three ways, and the wording matters at installation time. The strongest form is a spec field that reads like the Frigidaire sheet for the GCCG3048AS: Power Type LP NG, with LP Conversion Kit Included marked Yes, right beside the burner map.
Bosch prints the same idea as data, listing both a natural gas connection rating and an LP gas connection rating of 41,400 BTU for the NGM5058UC, plus a line stating the LP conversion kit is included. The second form is a feature statement: KitchenAid lists an LP Conversion Kit among the KCGS550ESS features and explains that it allows the cooktop to be converted for LP gas, and the Samsung listing states the LP conversion kit is included with the NA30R5310FS. The third form is a capability statement, which is how the GE listing describes the JGP5030SLSS: LP conversion capability, with compatibility for liquid propane setups. All three forms support an LP installation, but the first two tell the buyer the hardware ships with the cooktop, while the third tells the installer to confirm the kit arrangement for that model before the counter is cut.
Why the conversion itself belongs to a licensed installer
A gas type conversion is not a knob swap. Each burner needs an orifice sized for propane, the pressure regulator has to be set for the new fuel, and the finished flames need checking burner by burner. That is licensed gas work in most jurisdictions, and the schedule should include a qualified installer visit between delivery and first use.
Planning the conversion at purchase time avoids the two classic problems. The first is a cooktop installed and connected before anyone confirms the kit is on hand, which leaves a finished kitchen waiting on parts. The second is a conversion done without keeping the removed natural gas orifices, which makes a later change back to natural gas harder than it needs to be. Ask the installer to bag and label the original orifices and to note the conversion on the rating plate area, and keep the conversion instructions with the cooktop paperwork.
Burner ratings on natural gas and on LP
BTU figures on product pages are usually printed for the factory fuel, natural gas, so a propane buyer should ask one question of every model: does the maker publish the LP side of the table too? Bosch does for the NGM5058UC, and its LP gas connection rating matches the natural gas rating at 41,400 BTU, printed side by side in the maker data.
Where a maker prints only the natural gas map, the conversion instructions for the model carry the LP figures, and the installer works from those. For everyday planning, the natural gas burner map still tells a propane shopper most of what matters: which burner is the power burner, which one simmers, and how the sizes step across the surface. Samsung publishes a 45,000 BTU total for the NA30R5310FS across four burners, Frigidaire maps five burners from 5,000 to 18,000 BTU on the GCCG3048AS, and Whirlpool maps four burners from 5,000 to 15,000 BTU on the WCG55US0HS. The entries below use those published maps and say so, rather than presenting converted figures the opened pages did not print.
The six cooktops for liquid propane at a glance
The table compresses the evidence for all six models into one view: size and burner count, the strongest burner from the published map, the LP path exactly as the maker or listing states it, and the cutout where an opened page prints one. Two models show no cutout in the table because the opened pages for them did not state one.
| Model | Size and burners | Strongest burner | LP path as listed | Cutout (in) |
|---|---|---|---|---|
| KitchenAid KCGS550ESS | 30 inch, 5 burners | 17,000 BTU dual ring | LP Conversion Kit listed by the maker | Not stated on the opened page |
| Samsung NA30R5310FS | 30 inch, 4 burners | 17,000 BTU | LP conversion kit included | 28.5 x 19.63 |
| GE JGP5030SLSS | 30 inch, 5 burners | 15,000 BTU Power Boil | LP conversion capability listed | Not stated on the opened page |
| Frigidaire Gallery GCCG3048AS | 30 inch, 5 burners | 18,000 BTU Quick Boil | LP Conversion Kit Included: Yes | 27.25 to 29.31 x 19 to 20 |
| Whirlpool WCG55US0HS | 30 inch, 4 burners | 15,000 BTU SpeedHeat | LP Convertible: Yes, kit included | 28.5 x 19 |
| Bosch NGM5058UC | 30 inch, 5 burners | 16,000 BTU | LP conversion kit included; LP rating printed | Not stated on the opened sheet |
Read the LP path column as the headline. Five of the six models state the kit is included or listed among the model features, and the sixth, the GE, states conversion capability, which an installer confirms when booking the job. The strongest-burner column shows how close this group runs: only 3,000 BTU separate the Frigidaire Quick Boil burner at the top from the 15,000 BTU power burners on the GE and the Whirlpool, so grate design, simmer burners and cutout fit will separate these models more than raw power will.
Detailed reviews of the six LP-ready cooktops
Each review leads with the LP evidence for the model, then covers the burner map, grates and controls from the same opened pages. Where a page stayed silent on a specification, the review says the maker does not state it, so no figure in these reviews rests on anything but the printed fields for that model.
KitchenAid KCGS550ESS: a 17,000 BTU dual ring burner with an LP kit
KitchenAid lists an LP Conversion Kit directly in the feature set of this 30-inch, five-burner cooktop, with the plain explanation that the kit allows the cooktop to be converted so it can be used with LP gas. For a propane household, that single line does the qualifying work before any burner figure enters the discussion.
The 17,000 BTU Professional Dual Ring Burner runs from one small flame for precise simmering to a dual flame for powerful boiling on the same burner, which reduces the need to move pans mid-recipe. The 6,000 BTU Even-Heat Simmer Burner uses its diffuser plate for control at the lowest setting, aimed at melting without scorching. Full-width cast-iron grates let cookware slide across the whole surface, electronic ignition removes any standing pilot, and the CookShield Finish protects the surface against stains from high-temperature cooking and wipes clean without harsh chemicals, per the maker. The maker does not state a cutout or the remaining burner ratings on the opened page, so those figures need confirming from the model documents before cabinet work starts.
Samsung NA30R5310FS: four burners, 45,000 BTU and the kit included
The Samsung listing states the fuel position in two short lines: the cooktop is factory-configured for natural gas, and the LP conversion kit is included, with the hardware to convert the cooktop for use with liquid propane. That pairing is exactly what a propane buyer needs to read before looking at a single burner rating.
The burner set runs 17,000 BTU at the right-front power position, then 13,000 and 10,000 BTU mid burners and a 5,000 BTU simmer burner, a spread that covers fast boiling down to gentle sauce work, and the four burners total 45,000 BTU. Two interlocking continuous cast iron grates keep the surface unified while staying easier to lift than a single full-width grate, sealed burners keep spills on the surface, and the front knobs are weighted metal. The listing prints a cutout of about 28.5 by 19.63 inches and a 120V electronic ignition with re-ignition if a flame goes out, and it marks the design ADA compliant with a one-year parts and labor warranty.
GE JGP5030SLSS: edge-to-edge grates and listed LP conversion capability
The GE listing describes this 30-inch, five-burner cooktop with an LP conversion capability line, stating compatibility for liquid propane setups where natural gas is not available, and a spec table for the model adds that the propane conversion kit is included. The headline wording still earns one extra confirmation at booking time.
The cooking hardware centers on a 15,000 BTU Power Boil burner and a Precise Simmer burner for low, steady heat, with five sealed burners under edge-to-edge continuous cast iron grates. The listing notes the grates are listed for dishwasher cleaning and can also go through an oven self-clean cycle, the deep-recessed stainless surface contains spills on the cooktop, and the front-center knobs sit ahead of the burners rather than beside hot pans. Electronic pilotless ignition and an ADA compliant design round out the listing. The opened listing does not state a cutout or the remaining burner ratings, so both belong on the pre-installation checklist for this model.
Frigidaire Gallery GCCG3048AS: an 18,000 BTU center burner and backlit knobs
Frigidaire documents the LP position for this 30-inch Gallery cooktop more completely than any other model here: the maker spec sheet lists Power Type as LP NG and LP Conversion Kit Included as Yes, in the same table that maps all five burners. The fuel data sits in the specification fields, not in a feature blurb.
The center front Quick Boil burner carries 18,000 BTU, the strongest single burner in this group, backed by 12,000 BTU right front, 9,500 BTU left front, 7,500 BTU left rear and a 5,000 BTU right rear low simmer burner. Backlit LED knobs light up while a burner is in use, the burner caps are listed for dishwasher cleaning, and three continuous cast iron grates run edge to edge over a recessed surface designed to contain spills. The maker sheet also gives the most complete fit data here: a 30 by 21 inch body, cutouts from 27.25 by 19 inches up to 29.31 by 20 inches, a weight of 43 pounds and one-year parts and labor warranty coverage.
Whirlpool WCG55US0HS: hinged grates and a 15,000 BTU SpeedHeat burner
The Whirlpool spec table answers the fuel question in one field: LP Convertible, Yes, kit included. The same table maps four burners rather than five, making this the second four-burner option in the group, suited to cooks who would rather have four larger cooking positions than a fifth burner they rarely light.
The left rear SpeedHeat burner leads at 15,000 BTU, the right rear adds a second SpeedHeat burner at 12,000 BTU, the right front runs 9,100 BTU, and the left front AccuSimmer burner holds 5,000 BTU for low, even heat on sauces and soups. The EZ-2-Lift hinged cast-iron grates are the standout hardware here: they hinge up so the surface underneath can be wiped without lifting the grates off, and they are also listed for dishwasher cleaning. An upswept SpillGuard surface with raised edges contains spills, direct spark ignition lights the sealed burners, and the table prints a 28.5 by 19 inch cutout, a 43 pound net weight and compatibility with installation over a built-in oven.
Bosch NGM5058UC: an OptiSim burner and equal gas connection ratings
Bosch states the LP case for the 500 Series NGM5058UC in its own spec sheet: an LP conversion kit is included for conversion from natural gas to liquid propane, and the technical data prints a natural gas connection rating and an LP gas connection rating that match at 41,400 BTU each, side by side.
Five high-efficiency burners sit under full-width continuous cast iron grates, led by a 16,000 BTU power burner, and the OptiSim burner is built for the low end, simmering delicate sauces and melting chocolate without scorching, per the maker. Sealed burners keep spills out of the burner box, the knobs are full metal with push-to-turn electronic ignition, and a single red LED light shows when burners are on. The sheet also lists a flame thermocouple sensing device that switches off the gas supply if a flame temporarily goes out, and STAR-K Sabbath compliance. The opened sheet does not print a cutout, so that figure needs the model installation document before ordering cabinets.
Planning the installation of cooktops for liquid propane
An LP cooktop installation has two halves: the counter work, which follows the same cutout discipline as any built-in cooktop, and the fuel work, which is specific to propane and belongs to a licensed installer. The three checks below use only figures printed on the opened pages for these six models, and they are worth running in order.
Cutout checks before the counter is cut
Four of the six models print cutout data on an opened page, and the ranges are usefully tight: the Whirlpool asks for 28.5 by 19 inches, the Samsung for about 28.5 by 19.63 inches, and the Frigidaire accepts the widest span, from 27.25 by 19 inches up to 29.31 by 20 inches. Measure the current opening in both directions before ordering.
For the KitchenAid, the GE and the Bosch, the opened pages do not state a cutout, and that gap is a task, not a detail: pull the figure from the model installation document and confirm it against the counter before the cooktop ships. Depth below the counter matters too on installs over an oven or drawers; the Frigidaire sheet lists a cutout height of 7.5 inches, and the Whirlpool body stands 4.13 inches tall, so under-counter clearance belongs in the same measurement pass.
Tank, regulator and line questions for the installer
The conversion visit goes smoothly when the installer knows three things in advance: the exact model number, that the home runs on liquid propane, and whether the model kit is packed with the cooktop or arranged separately. Five of these six models state the kit is included or listed with the model; the GE states conversion capability.
Ask also about the supply side. The installer will check the tank regulator arrangement and the line sizing against the cooktop rating plate, confirm the pressure regulator conversion for the model, and set and check each burner flame after the orifice change. Booking that visit for the same week as delivery avoids a finished cooktop sitting unusable, and keeping the removed natural gas orifices, labeled, keeps the door open to a future fuel change.
Matching a simmer burner to propane cooking
Every model in this group carries a dedicated low-heat answer, and for propane households that cook sauces, grains and soups often, the simmer burner matters as much as the power burner. The Samsung and the Frigidaire both drop to a 5,000 BTU simmer burner, and the Whirlpool AccuSimmer burner also runs 5,000 BTU at the left front.
The KitchenAid pairs a 6,000 BTU Even-Heat simmer burner with a diffuser plate, the Bosch OptiSim burner is designed for the lowest settings, and the KitchenAid dual ring power burner adds a second route to low heat, throttling down to a single small flame. When comparing models, check where the simmer burner sits as well as its rating; a rear simmer burner keeps a sauce pot out of the traffic lane, while a front one is easier to watch and stir. The published maps in the reviews above give the position and the rating together for the Samsung, Frigidaire and Whirlpool.
Care and cleaning after conversion
Conversion changes nothing about daily care: the same sealed burners, grates and surfaces carry on, and the cleaning hardware is one of the quiet strengths of this group. Every model here seals its burners against spills reaching the burner box, and several add grates or caps the makers list for dishwasher cleaning.
The Whirlpool hinged grates lift for a wipe underneath without removal, the Frigidaire burner caps go in the dishwasher, the GE grates are listed for dishwasher cleaning and for an oven self-clean cycle, and the KitchenAid CookShield Finish wipes clean without harsh chemicals, per the maker. After the installer conversion visit, a simple routine holds: wipe the surface once it cools, lift or hinge the grates weekly, and keep burner ports clear so the flame pattern the installer set stays even.
Frequently asked questions
The questions below are the ones propane households ask before ordering, and each answer sticks to what the opened pages for these six models actually state. Anything the pages leave open, from a cutout figure to a kit arrangement, is flagged as a check to run before ordering rather than filled in with a guess.
Do these cooktops arrive set for propane?
No. The listings describe these models as configured for natural gas, with the LP path provided by a conversion kit or a listed conversion capability. The Samsung listing says it directly: factory-configured for natural gas, LP conversion kit included. Plan on the conversion as part of the installation, done by a licensed installer.
Confirming the kit is on hand before the delivery date means the cooktop can be cooked on the day it lands, rather than waiting on a second visit. The same logic applies to the counter work: the cutout figures printed for four of these models, and the installation documents for the other two, should be checked against the kitchen before the truck is booked.
Can an LP cooktop go back to natural gas later?
A conversion replaces the burner orifices and resets the regulator, so going back means reversing that work with the original natural gas orifices. That is why the practical advice is simple: have the installer bag and label the removed orifices, and keep the conversion instructions with the cooktop paperwork for the home.
With the original parts kept, a later change of fuel supply is a repeat of the same installer visit rather than a parts search. Note the conversion where the rating plate sits as well, so anyone servicing the cooktop later can see at a glance which fuel the burners are set for and which orifice set is installed.
Does LP change the burner output of a cooktop?
It depends on the model, which is why the published LP figures matter. Bosch prints the same 41,400 BTU connection rating for natural gas and for LP gas on the NGM5058UC, so on that model the maker rates the two fuels equally. Where only the natural gas map is printed, the conversion instructions carry the LP ratings.
That is also why the reviews above quote the natural gas burner maps as published and label them as such, instead of presenting converted figures. The installer sets and checks the flames against the LP figures in the conversion instructions for the exact model, so the numbers that govern the finished installation come from the maker documents for that unit.
Conclusion
For a propane household, the short list writes itself: pick the model whose LP evidence is printed, not implied. The Frigidaire GCCG3048AS and the Bosch NGM5058UC state it in specification fields, the Samsung NA30R5310FS and the Whirlpool WCG55US0HS pair included kits with burner maps, and the KitchenAid and GE models complete the six.