Key takeaways
- Find the best washers for jewelry making in flat steel, brass, and gold plate. Compare hole sizes, diameters, and counts to match your beads and stringing cord.
The best washers for jewelry making are small, flat metal discs that sit between beads, keep a strand tidy, and stop larger beads from sliding out of place. This guide looks at six washer style spacers in steel, brass, and gold plate, with hole sizes and diameters taken from the listings themselves.
Quick verdict
A flat metal washer gives a beaded strand a clean line and a firm stop between larger beads, and the right one fits the cord without wobble. The six picks below cover small and large holes, steel and brass, and plain and gold plate finishes for many kinds of beadwork.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| THREENEST 150 PCS spacer beads, 6 mm | Stainless steel round spacer | Everyday bracelets | 150 pieces, 3 mm hole | Thickness not stated |
| THREENEST 50 PCS spacer beads, 10 mm | Stainless steel round spacer | Large hole beads | 50 pieces, 5 mm hole | Thickness not stated |
| UNICRAFTALE 400 pcs round spacer beads, 4 mm | 304 stainless steel rondelle | Two color projects | 400 pieces, 1.6 mm hole | Small 4 mm diameter |
| PH PandaHall 40 pcs brass and rubber stopper beads | Brass stopper spacer | Holding beads in place | 40 pieces, 1 mm hole | Only two small sizes |
| PH PandaHall 30 pcs stainless steel slider beads | 304 stainless steel rondelle | Adjustable bracelets | 30 pieces, 1 to 3 mm holes | Rubber ring inside |
| My Roller Stone stainless steel flat round spacers | Gold plated flat washer | Gold accent strands | 6 mm or 8 mm, 2 mm thick | Only two size options |
The THREENEST 150 piece set is the most useful starting point for most makers, since its 6 mm diameter and 3 mm hole suit a wide range of bead strands. Makers who work with chunky beads or thick cord should look at the THREENEST 50 piece set instead. For gold tones, the My Roller Stone flat washers give the clearest washer shape.
How we selected
Selection started from published product listings and the specifications printed on those pages, not from memory or guesswork. Each pick had to be a washer style spacer made for jewelry work, with a stated material, diameter, and hole size on pages that could be opened.
Products that matched laundry washers, hardware washers for bolts, or plain round beads with no flat washer character were left out. Where a listing left a detail out, such as thickness, that gap is noted in the product section rather than filled in with a guess.
Six washer style spacers in detail
Each product below is described with its listed material, size, hole, and count, followed by who it suits and where its limits sit. Read the hole size first, since a washer that will not pass over the cord cannot be used at all, then check the diameter against the beads beside it.
THREENEST 150 PCS Stainless Steel Spacer Beads, Round Polished Metal Beads Craft Finding for Bracelet Necklace Earring Jewelry Making [Hole 3mm x Dia. 6mm] 0102
This THREENEST set suits makers who string bracelets, necklaces, and earrings on a regular basis and want one plain steel spacer for many designs. Its round, polished form reads as a small flat disc between beads, and the silver color sits quietly beside glass, stone, and metal beads.
The maker lists the material as stainless steel and the size as a 3 mm hole with a 6 mm diameter. The set holds 150 pieces, and the listing gives a weight of about 0.5 g per piece and a listed item weight of 0.07 kilograms. The seller is shown as THREENEST Direct, and the shape is listed as round.
The listing does not state the thickness of each bead, so the maker does not state how far each washer will push neighboring beads apart. The 3 mm hole suits many common cords and wires, but it will not fit over very thick stringing material.
- Pro: The count of 150 pieces covers several strands.
- Pro: The 3 mm hole fits many common cords and wires used in beadwork.
- Con: The maker does not state the thickness of each spacer.
- Con: The plain silver finish offers no gold tone option.
Buy if you want a plain steel washer style spacer in a useful middle size for bracelets and necklaces. Skip if your cord is thicker than the 3 mm hole, or if your design calls for a gold tone accent between beads.
THREENEST 50 PCS Stainless Steel Spacer Beads, Round Larger Hole Polished Metal European Beads Craft Finding for Bracelet Necklace Earring Jewelry Making [Hole 5mm x Dia. 10mm] 0105
This THREENEST set suits makers who work with large hole beads, European style beads, and thicker stringing material. Its 10 mm diameter gives a clear metal accent, and the larger hole opens the set to cords and chains that smaller spacers cannot take.
The maker lists the material as stainless steel and the size as a 5 mm hole with a 10 mm diameter. The set holds 50 pieces, and the listing gives a weight of about 2.4 g per piece and a listed item weight of 0.12 kilograms. The seller is shown as THREENEST Direct, and the shape is listed as round.
The listing does not state the thickness of each bead, so the maker does not state how much space each washer adds along a strand. The 10 mm diameter is large next to small beads, so it can crowd a delicate design.
- Pro: The 5 mm hole fits thicker cords and large hole beads.
- Pro: The 10 mm diameter gives a clear, visible metal accent.
- Con: The maker does not state the thickness of each spacer.
- Con: The 10 mm diameter can crowd small bead designs.
Buy if you need a large hole washer style spacer for chunky beads or thick cord. Skip if your beads are small and your cord is fine, since the smaller THREENEST set will sit better in that kind of design.
UNICRAFTALE About 400pcs 2 Colors Round Spacer Beads 4mm 304 Stainless Steel Loose Beads Rondelle Beads Metal Spacer Bead Small Smooth Beads Finding for DIY Bracelet Necklace Jewelry Making
This UNICRAFTALE set suits makers who want two metal tones in one box and who build many small pieces, such as charm bracelets and earrings. The two colors let a maker alternate tones along a strand, or keep one tone for warm designs and the other for cool designs.
The maker lists the material as 304 stainless steel and the size as about 4 mm in diameter, 3.5 mm thick, with a hole of 1.6 mm. The set holds about 400 pieces, with 200 pieces in each of the two colors, golden and stainless steel color. The maker describes the beads as sturdy, with a color that is non fading, and the box is listed at 6.8 x 5.2 x 1.1 cm.
The maker describes the beads as smooth and shiny, and states that they do not rust or warp easily. The 1.6 mm hole suits fine wire, thread, and thin cord, but it will not pass over thicker stringing material.
- Pro: The set holds about 400 pieces in two colors.
- Pro: The listed thickness of 3.5 mm gives a clear spacing effect.
- Con: The 1.6 mm hole will not fit thicker cords or wires.
- Con: The 4 mm diameter can look lost beside large beads.
Buy if you make many small pieces and want gold and silver tones in one set. Skip if your cord is thick, or if your beads are large enough to need a wider washer between them.
PH PandaHall 40pcs Brass and Rubber Stopper Beads (Platinum, Golden) 5x4mm / 4x2mm – Spacer Beads for DIY Bracelet and Necklace Jewelry Making
This PH PandaHall set suits makers who need small washers that also hold beads in place, rather than spacers that slide freely along a strand. The brass body with a rubber element grips the cord, so it can act as a stopper at the end of a bead run or between groups of beads.
The maker lists the material as brass and rubber, in platinum and golden colors, with two sizes in the set: about 5 x 4 mm and about 4 x 2 mm, with a hole of 1 mm. The set holds 40 pieces. The listing gives an item weight of 80 grams, or 2.82 ounces, and package dimensions of 5.2 x 4.09 x 0.59 inches. The item model number is listed as wh-KK-PH0010-56-US24.
The maker describes these stopper spacer beads as useful for spacing and holding beads in place, and notes that they can be paired with different styles of jewelry. The 1 mm hole is narrow, so it suits fine cord and wire only.
- Pro: The brass and rubber build lets the bead grip the cord and hold a position.
- Pro: Two sizes and two colors give some choice in one set.
- Con: The 1 mm hole suits fine cord and wire only.
- Con: The count of 40 pieces is low for long strands.
Buy if you want small stopper style washers that hold beads where you put them. Skip if your cord is thicker than the 1 mm hole, or if you need a wide flat washer as a visual accent.
PH PandaHall 304 Stainless Steel Slider Beads 30pcs Stopper Bead 7mm 8mm 10mm Adjustable Slider Metal Loose Beads with Rubber Inside for Bracelet Necklace Snake Chain Jewelry Making Hole: 1-3mm
This PH PandaHall set suits makers who build adjustable bracelets and necklaces, and who work with snake chain and European style bracelets. The rubber ring inside each bead lets it slide to a chosen spot and stay there, which makes it useful for spacing and for holding beads in place along a chain.
The maker lists the material as rubber and stainless steel, in a silver color, and describes the beads as 304 stainless steel with a flat round shape and a smooth surface. The set holds 30 pieces in three sizes: the small size is about 7 mm in diameter and 3.5 mm thick with a rubber hole of 1 mm, the middle size is about 8 mm in diameter and 3.5 mm thick with a rubber hole of 2 mm, and the large size is about 10 mm in diameter and 5 mm thick with a rubber hole of 3 mm. Each size holds 10 pieces. The listing gives an item weight of 100 grams, or 3.53 ounces, and package dimensions of 2.6 x 2.05 x 0.55 inches. The item model number is listed as wh-STAS-PH0019-73.
The maker describes the beads as rust and corrosion resistant, with a rubber ring built in, and states that the slide beads suit necklaces, earrings, bracelets, and other jewelry making. The rubber ring is a wear part, so its grip may change with use. The set holds only 10 pieces of each size.
- Pro: Three sizes cover 1 mm, 2 mm, and 3 mm rubber holes.
- Pro: The flat round shape reads as a washer between beads.
- Con: Only 10 pieces come in each of the three sizes.
- Con: The rubber ring inside may lose grip over time.
Buy if you make adjustable bracelets or work with snake chain and need beads that stay put. Skip if you need many pieces in a single size, or if you want a plain metal washer with no rubber element inside.
My Roller Stone Stainless Steel Flat Round Spacers
This My Roller Stone product suits makers who want a true flat washer form in a gold tone, with a clean disc shape that reads as a washer. It is the clearest washer shape in this guide, and it works as a bright line between beads in bracelets, necklaces, and earrings.
The maker describes the product as round, flat, gold plated stainless steel spacers, with a smooth and shiny aspect and a simple, versatile style. Two size options are listed: the 6 x 2 option is 6 mm in diameter and 2 mm thick with a 1.5 mm hole, and the 8 x 2 option is 8 mm in diameter and 2 mm thick with a 2 mm hole. The maker notes that the disc shape separates beads and gives a consistent metallic accent, and that the spacers pair with gold accents.
The maker advises checking the wire diameter against the hole before ordering, and gives care notes: wipe with a soft, dry cloth, avoid perfumes, chemicals, and abrasive rubbing, and store in a dry place away from items that could scratch the finish. The maker does not state a piece count in the main description text.
- Pro: The flat washer form gives the clearest washer look in this guide.
- Pro: Two size options cover 6 mm and 8 mm diameters.
- Con: The gold tone is the only color option listed for this product.
- Con: The piece count is not stated in the description.
Buy if you want a gold tone flat washer with a true disc shape for accent work. Skip if you need a silver tone, or if you need a stated piece count before you order.
Buying guide for washers for jewelry making
Buying washers for jewelry making comes down to four measurements and one habit: hole, diameter, thickness, material, and a quick test before a full strand is strung. The sections below walk through each point in turn, so a maker can pick a washer that fits the cord, the beads, and the look of the finished piece.
How to measure washers for jewelry making
Start with the three numbers that decide whether a washer can be used at all: the hole, the diameter, and the thickness. The hole must pass over the cord or wire with a little room to spare, the diameter must sit well beside the beads next to it, and the thickness sets how far apart those beads will sit.
Measure the cord or wire first, then look for a hole larger than that measurement, since a hole that only just fits can bind on a knot or a crimp. Lay a bead beside the washer on a flat surface and look at the pair from above, since that view shows whether the washer will read as a thin line or a wide disc.
Match the hole to the cord or wire
The hole is the first filter, because a washer that will not pass over the stringing material has no use in that design. Fine thread and thin wire suit holes near the small end of the range in this guide, while thicker cords, leather, and chain need the larger holes found in the big hole sets.
Watch out for knots, crimps, and doubled cord, since each of these is thicker than the cord alone and must pass through the hole too. A stopper bead with a rubber ring inside grips the cord, so its rubber hole should match the cord closely, while a plain metal washer can take a looser fit.
Match the diameter to the beads beside it
Diameter decides how the washer looks once the strand is finished, and the right choice depends on the beads on either side. A washer close in size to its neighbors reads as a quiet line, while a wider washer reads as a clear metal band and can frame a focal bead.
Small beads pair well with washers in the 4 mm to 6 mm range, since a wider disc can crowd them and hide their shape. Large beads can take washers in the 8 mm to 10 mm range, where the metal has room to show.
Choose the metal and finish with care
Stainless steel is the plain workhorse in this guide, with a silver tone that sits beside most bead colors without drawing the eye away from the focal beads. Brass gives a warmer tone, and gold plate gives a bright accent that pairs with gold findings, clasps, and chains in the same design.
Mixing metals in one strand can work when it looks planned, such as a gold washer repeated at even intervals, but a single stray tone can look like a mistake. The finish also affects care, since a plated surface calls for gentle handling and storage away from items that could scratch it.
Plan the count before you start a strand
Count the washers a design needs before ordering, since small packs run out fast on long strands. A bracelet that places a washer between every bead needs nearly as many washers as beads, while a necklace that uses washers only beside focal beads needs far fewer.
Add a few spares to the count for dropped pieces and for trial strands, since small metal discs are easy to lose on a work surface. Check whether a set splits its count across sizes or colors, since a set of 400 pieces in two colors holds 200 pieces of each color, not 400 of one.
Store small washers so none go missing
Small washers roll, bounce, and slip into cracks, so storage matters as much as the choice of metal. A lidded box with small compartments keeps sizes and colors apart, and a tray with a rim catches pieces that would otherwise roll off the bench during a project.
Label each compartment with the diameter and hole size, since washers in the 4 mm to 10 mm range look much alike once they are out of their packs. Keep stopper beads with rubber rings apart from plain washers, so the rubber does not pick up dust or lint from the bench.
FAQ about washers for jewelry making
Makers new to washer style spacers ask the same few questions, and the answers come down to fit, form, and care. The questions below cover what a washer is, how the hole works, which beads sit well beside metal, how plated finishes age, and how to stop small washers from sliding.
Are metal washers the same as spacer beads
Metal washers and spacer beads overlap, but they are not the same thing in every listing. A spacer bead is any small bead used to separate larger beads, and it can be round, tube shaped, or flat, while a washer is a flat disc with a center hole, shaped much like a hardware washer.
In jewelry listings the two terms are often used for the same flat round beads, so the shape matters more than the label. Look at the listed thickness and diameter: a flat disc with a small thickness reads as a washer, while a round bead with no flat faces does not.
What hole size works with elastic cord
Elastic cord needs a hole that passes over the cord without stretching it, since a tight hole can wear the elastic where it rubs. A plain metal washer can take a looser fit than a stopper bead, because it does not need to grip, while a rubber ring stopper needs a closer fit to hold its place.
Knots in elastic are thicker than the cord, so the hole must pass over the knot too, or the washer must be strung before the knot is tied. Test one washer on a scrap length of the same elastic and slide it along before stringing the full strand.
Can washers sit next to glass beads
Metal washers can sit next to glass beads, and the mix is common in bracelets and necklaces, since the metal gives a firm edge beside a smooth glass surface. The washer also guards the glass bead hole, since the flat metal face spreads contact over a wider area than a cord alone.
Check the edges of the washer before stringing, since a rough edge can mark a soft glass surface over time. A smooth, polished washer is the better neighbor for glass, and a washer with a listed smooth surface is worth choosing for that reason.
Do gold plated washers change color over time
Gold plate is a thin layer over a base metal, so its look can change with wear, contact with chemicals, and rough storage. The maker of the gold plated washers in this guide advises wiping with a soft, dry cloth, avoiding perfumes and chemicals, and storing in a dry place away from items that could scratch the finish.
That care advice is the best guide to how the finish should be treated, since the maker knows the plating used on the product. Keep plated washers apart from rough tools and other metal findings, and handle them with clean, dry hands.
How do I keep small washers from sliding
Plain washers slide freely on cord, which is fine when they sit between beads that hold them in place, but a washer at the end of a run needs a stop. Stopper beads with a rubber ring inside grip the cord and hold a position, which makes them useful at the ends of bead groups and beside sliding clasps.
A knot tied close behind the last washer can also hold a run in place, though the knot adds bulk that must fit the design. Choose the method that matches the stringing material, and test the hold on a scrap length before finishing a piece.
Conclusion
The best washers for jewelry making are the ones that fit the cord, match the beads beside them, and give the strand a clean, planned look. Start with the THREENEST 150 piece set for general work, add the gold My Roller Stone washers for warm accents, and keep stopper beads on hand for runs that must stay put.
Write Your Review
No reviews yet. Be the first to share your experience!