Updated Nov 17, 2026· 14 min read

Key takeaways

  • Sewing unpaper towels? Compare birdseye, flannel and microfiber terry picks, with sourced details, a comparison table, layering tips, care advice and FAQs.

If you plan to sew your own, the best fabric for unpaper towels needs to absorb well, wash easily and stay soft after many laundry cycles. This guide compares six cloth choices side by side, including named flannels and birdseye, using published pages, then shows how to layer, sew and care for them at home.

Quick verdict on the best fabric for unpaper towels

Pick a 100% cotton flannel for the face of the towel and birdseye or terry for the core. Those combinations show up repeatedly in published sewing guides. Microfiber terry is absorbent but has a moisture trade-off, so use it only as a hidden layer if at all.

  • Best core layer: Birdseye Diaper Cloth White, described as highly absorbent and generally fast drying.
  • Best face fabric: a medium-weight cotton flannel such as A. E. Nathan Diaper Flannel or Kaufman Mammoth Flannel.
  • Best lightweight option: Newcastle Flannel, in many patterns and colors.
  • Ready-made alternative: Marley’s Monsters cotton flannel towels, if you do not sew.

Side-by-side comparison of six cloths

The table lists each cloth as a fabric by its published name, with the weight, fiber and care wording the page states. It leaves out price and product codes. Where a page does not state a size or thread count, the table does not invent one, so some cells are general.

Cloth Fiber and weight What the page says Best for Main trade-off
Birdseye Diaper Cloth White 100% cotton, medium weight Highly absorbent, generally fast drying Absorbent core Plain white, pair with a print
A. E. Nathan Diaper Flannel 100% cotton, medium-weight flannel Often gets softer and softer with repeated washing Soft face fabric Page advises washing on hot
Kaufman Mammoth Flannel 100% cotton, medium weight, brushed on both sides Absorbent, durable, softens with use Layered with terry Page lists product images that do not match
Newcastle Flannel 100% cotton, lightweight, brushed on both sides Soft, absorbent, many patterns Single layer or light jobs Thinner, so less capacity
AKAS Tex Microfiber Terry Soaker Polyester and polyurethane blend, medium to heavy Super absorbent but traps moisture Hidden backing layer No fabric softener, not natural
Marley’s Monsters flannel towels 100% cotton flannel, 12 x 10 inches Softer and more absorbent after every wash Ready-made sets, no sewing Cut size is fixed

How we selected the best fabric for unpaper towels

Selection rests on fetched pages that name a specific fabric, say it works for unpaper towels and describe its fiber, weight or care. Where a page gave no size, thread count or price, that gap is left open. Nothing here comes from hands-on sewing or testing.

What each pick had to show

A cloth qualified when a page named it by product or fabric name and described how it behaves, such as absorbency, drying or washing. Retail pages for some brands could not be opened, so a few well-known names are missing. Only fabrics with a page we could read are recommended.

What we weighed

The ranking favors cotton flannel and birdseye because they appear most often across the pages, with notes on durability and softening. Caveats count too. A fabric with a stated downside, such as microfiber trapping moisture, is included with that warning attached, so you can decide for yourself.

Six cloths for unpaper towels, reviewed

Each entry covers who the cloth suits, what the pages state, the limits and a buy or skip note. Specs are quoted as listed. Since none of this is hands-on, treat the notes as a shopping guide, and wash and test a small piece before cutting yardage for a whole set.

Birdseye Diaper Cloth White

This is the pick for the absorbent core of a layered towel. It is a plain white, lightweight-feeling cotton that sewers use when they want a layer that soaks up liquid without adding much bulk or slowing drying more than necessary, which keeps a layered towel flexible enough to fold.

The Seam Secrets guide describes it as highly absorbent and generally fast drying, made of 100% cotton in a medium weight, generally quite durable and long lasting, and easy to launder. It suggests pairing it with another patterned cotton or flannel fabric. The DIY Danielle guide also uses birdseye for absorbency, with a cotton top that washes nicer than flannel.

  • Pros: absorbent wording, fast drying wording, durable, easy to launder.
  • Cons: plain white, best as a core layer, and no size or thread count given.

Birdseye also works for the smallest cloths. The DIY guide mentions small face wipes at 6 x 6 or 8 x 8 inches, which suit a lightweight layered cloth. For the main towels, a larger size works better.

Because the page gives no thread count or size, plan to buy a small amount first. Wash it, run the water test and cut one sample towel before you order enough for a full set. Birdseye is also a common diaper cloth, so you may find it sold by the yard or in pre-cut packs, and the care routine stays the same.

Buy if you want an absorbent core with a pattern on top. Skip it if you want a finished printed towel without sewing.

A. E. Nathan Diaper Flannel

This flannel is for sewers who want a soft, durable face fabric. It is a medium-weight cotton that the guide recommends combining with a patterned cotton for a layered towel, which gives you color on the outside and absorbency inside, and keeps the towel pleasant to hold.

The Seam Secrets guide lists it as 100% cotton medium-weight flannel, notes that cotton is generally quite absorbent, and calls the fabric soft and durable. It says that with repeated washing the fabric often gets softer and softer, and advises washing on hot. It suggests using it with another patterned cotton fabric.

  • Pros: 100% cotton, medium weight, softens with washing.
  • Cons: page advises hot washing, which may suit some households less, and no size is given.

Washing on hot means the fabric may shrink, so pre-wash before cutting. The DIY guide also says to prewash the fabric so it does not shrink after you sew it. Cut your squares after the first wash and dry.

Many sewers choose a printed cotton for the outside and flannel inside instead, so you can flip the roles. The DIY guide uses cotton for the top because it washes nicer than flannel. Either way, a cotton face and a flannel or birdseye core is a combination that appears across the pages and is easy to sew.

Buy if you want a dependable cotton flannel face. Skip it if you prefer cold washing only or a lighter cloth.

Kaufman Mammoth Flannel

Kaufman Mammoth Flannel is the pick for layered towels where you want a stronger, brushed cotton face over a terry core. It is described as medium weight and absorbent, which suits people who handle wet jobs and want towels to hold up through frequent washing and rough use.

The Seam Secrets guide lists it as medium-weight, 100% cotton flannel brushed on both sides, absorbent and durable, softening with use and washing. It suggests combining it with another fabric like terrycloth for extra absorbency, and advises cold water washing and low heat drying. The guide adds that product images in that section appear to show other items, so verify the product before buying.

  • Pros: brushed both sides, medium weight, pairs with terry, cold wash advice.
  • Cons: the page has mismatched product images, and no size is given.

The mismatched images are a reminder to read the listing carefully and confirm the name, fiber and weight before you order yardage. When in doubt, ask the seller to confirm that the fabric is 100% cotton flannel.

Cutting plan matters here. Because the fabric is brushed on both sides, either face can go outward, which helps if you are sewing with the right sides together and turning the towel. Check the listing for the exact bolt width, since the guide does not state one, and buy a little extra for shrinkage and straightening the cut edges.

Buy if you want a flannel and terry combination. Skip it if you want a tight, thin towel that stores on a roll.

Newcastle Fabrics Newcastle Flannel

This lightweight flannel is for makers who want a soft towel in many prints. It suits dusting, light wiping and quick spills, and it is the easiest of the group to sew in several layers without a bulky seam, so it suits first-time projects and quick sets.

The Seam Secrets guide lists it as lightweight, 100% cotton flannel brushed on both sides, soft, absorbent and durable, available in many patterns and colors. It says to use it on its own or combine it with other absorbent materials, and advises machine washing and drying on low heat.

  • Pros: many patterns, soft, light, can be used alone or layered.
  • Cons: lightweight, so less absorbent capacity per layer, no size given.

A lightweight cloth is a good candidate for stacking. Two layers of flannel with a birdseye core make a towel that is thin enough to roll and absorbent enough for a spill. Try a sample before you cut a full set.

Pattern choice is part of the appeal. A busy print hides stains and wear, while a plain color shows them. The page says many patterns and colors are available, so you can match a kitchen or color-code towels by job, such as one print for dusting and another for spills, and keep the two stacks apart.

Buy if you want color and softness in a thinner towel. Skip it if you mostly clean up liquid spills.

AKAS Tex Microfiber Terry Soaker White

This microfiber terry is the synthetic option, and it is best treated as a hidden layer. It suits sewers who already use microfiber and want a quick, absorbent backing, as long as they accept the page’s warning about how microfiber handles moisture and keep it out of sight.

The Seam Secrets guide describes it as super absorbent and a medium-to-heavy polyester and polyurethane blend. It warns that the fabric traps moisture instead of absorbing it like natural fibers do, so it recommends a cotton or flannel top. It advises washing in warm water, drying on low heat or drip drying, and using no fabric softener.

  • Pros: absorbent wording, works as a backing, simple care.
  • Cons: traps moisture, synthetic blend, no fabric softener, not a natural fiber.

If you want an all-cotton kitchen routine, skip this one. If you use it, keep it inside the towel, where the cotton face touches the spill and the backing holds on to what the cotton passes through.

Treat any microfiber you add as a separate layer that you can remove or replace. Because it is synthetic, it will not behave like the cotton around it in the dryer, and the guide advises low heat or drip drying. Mixing it into a load with heavily soiled cloths may spread residue, so wash it with similar cloths.

Buy if you want an inexpensive backing layer and accept the trade-off. Skip it if you want all-natural fibers.

Marley’s Monsters cotton flannel towels

Marley’s Monsters is the ready-made option for people who like the flannel approach but do not sew. It is also a useful benchmark, since its size and fabric are described in two roundups, and you can copy that size when you cut your own towels at home.

The Sustainable Jungle roundup lists the towels as 100% cotton flannel, with each single-ply cloth 12 x 10 inches and sold in packs of six or twelve, or as a full roll and holder. The TRVST roundup lists cotton flannel in packs of 6 or 12 and says the towels become softer and more absorbent after every wash.

  • Pros: no sewing, flannel, softens with washing, roll and holder option.
  • Cons: fixed size, single-ply, listed by roundups, not by the maker page.

The maker page could not be opened here, so check the current product and pack options on the brand site before ordering. The roundups give a consistent picture of fabric and size, which makes this a reasonable template for your own sewing.

Because the roundups describe a single-ply flannel, this is also a good way to learn whether flannel on its own is enough for your home. If you find one layer too thin, you can sew your own two-layer version. The pages do not describe the towels’ edges or stitching, so ask the maker if that matters to you.

Buy if you want ready-made flannel towels. Skip it if you prefer to choose your own fabric and layers.

Buying guide to the best fabric for unpaper towels

The best cloth depends on what you wipe, how many layers you want and how you launder. These sections cover the choices that most often change results. They are general guidance, so follow the care label on any fabric you buy and pre-wash before cutting.

Layer a soft face over an absorbent core

The most repeated advice across the pages is to pair fabrics. A flannel or printed cotton face feels pleasant and holds up, while a birdseye or terry core does the absorbing. The DIY recipe uses two squares, one of each fabric, sewn right sides together, turned and topstitched.

Choose cotton flannel as your default

Flannel is the preferred choice of the DIY author for most sets, and the Seam Secrets guide lists three flannels. It is soft, sews easily and softens with washing. Choose a lightweight flannel for dusting and a medium weight for spills, and keep both in your set.

Do a water test before you cut

A DIY guide suggests running a sample under water. If the water beads up and runs off the fabric in a river, it is a poor choice. This takes a minute and saves you from sewing a full set from a fabric that sheds water instead of absorbing it. Do the test on a washed piece, since new fabric can behave differently before its first laundering.

Decide how big to cut

The DIY author’s current towels are about 10 x 10 inches, her original towels were 12 x 12, and small face wipes were 6 x 6 or 8 x 8. Marley’s Monsters towels are listed at 12 x 10. Pick a size that fits your hand and your holder or drawer, and cut every square the same so the stack stays neat.

Sew them with a simple method

The standard method is to cut two squares, place them right sides together, sew around the edge leaving a small gap, turn right side out, press and topstitch. A faster method folds a long strip of flannel and cuts it into squares. Snaps are optional, and one author skipped them.

Care for the finished towels

Pre-wash, then follow the care guidance for your fabric. The DIY guide avoids fabric softener because it makes towels absorb less well, and the Lola blog also warns against softeners, chlorine bleach and dryer sheets. If you use microfiber, follow its stated care of warm water and low heat.

Avoid common mistakes when sewing

Typical errors are cutting before pre-washing, mixing fabrics that shrink differently, leaving the turning gap too small, skipping the topstitch and using fabric softener in the wash. Each one is easy to avoid. Cut a test towel first and wash it twice, then check how it looks and feels before sewing the rest.

Another mistake is making towels too large to handle. A square that fits comfortably in one hand is easier to fold, wash and store. Keep a mix of sizes, with small squares for faces and counters and larger ones for spills, so you always have the right tool close by.

Frequently asked questions

These answers cover what sewers and shoppers ask most about cloth that replaces paper towels. They stay general where the pages are silent and point you to the care label and your own sample for anything specific to your home, laundry routine and water.

Is flannel or terry better?

Neither wins in every case. Flannel is the most recommended single fabric and gets softer with washing, while terry is added for extra absorbency. Many guides combine them, with flannel on the face and terry or birdseye inside. Choose by how wet your usual messes are.

How many layers should I use?

The DIY recipe uses two layers, one of each fabric. The Seam Secrets guide suggests combining a flannel with another fabric such as terrycloth, and notes that the lightweight flannel can be used alone. Try a two-layer sample first, then add a third only if you need more capacity.

Do I need to pre-wash the fabric?

Yes, in general. The DIY guide says to prewash so the fabric will not shrink after sewing, and Lola advises washing new towels before first use. Pre-washing also removes manufacturing residue and lets the cotton relax before you cut squares, so the finished towels hold their shape better after the first few washes at home.

Can I use microfiber alone?

You can, but the Seam Secrets guide warns that microfiber traps moisture instead of absorbing it like natural fibers do, and recommends a cotton or flannel top. If you want a towel that takes up spills, use cotton on the outside and treat microfiber as an optional backing.

How should I wash them?

Follow the fabric’s care label. The pages here suggest washing new cloths first, drying on low heat for most cottons, and avoiding fabric softener, chlorine bleach and dryer sheets. Results vary with your water and detergent, so adjust after the first few cycles.

Can I mix new fabric with old cloth?

The pages here do not discuss reusing old cloth, so there is no tested advice to give. In general, any fabric you add should be clean, free of fabric softener residue and pre-washed so it shrinks before sewing. Run the water test on it first, and keep mixed sets for jobs where perfect absorbency is not critical.

Conclusion

For a simple recipe, use cotton flannel on the face and birdseye or terry in the core. A. E. Nathan, Kaufman and Newcastle flannels cover medium and light weights, while microfiber works only as a hidden layer. Pre-wash first, test a sample with water, avoid fabric softener, and keep a spare stack in the drawer.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.