Key takeaways
- Compare the best dishwashers with two drawers for small loads and full family-sized loads. See capacities, noise levels, and drawer features before you choose.
Two drawers let you wash a small load in one drawer while the other stays free. The best dishwashers with two drawers pair independent washing with quiet running and flexible racks. This guide compares six Double DishDrawer models on capacity, noise, programs, and fit. Each model below holds 14 place settings, seven per drawer.
Quick verdict
Every model here is a Fisher and Paykel Double DishDrawer with 14 place settings, seven in each drawer, so the choice comes down to height, noise, and finish. The Series 7 Contemporary Tall models are the quietest at 42 dBA, while the Series 9 Integrated Tall needs panels and suits a flush kitchen. Start with height, then compare noise and energy.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Fisher and Paykel DD24DAX9 N | 24-inch built-in | Standard height kitchens | 14 settings, 43 dBA | Shortest height range here |
| Fisher and Paykel DD24DCHTX9 N | 24-inch built-in | Tall plates | 14 settings, 42 dBA | Highest water use here at 3.81 gal |
| Fisher and Paykel DD24DHTI9 N | 24-inch built-in | Flush panel kitchens | 14 settings, 43 dBA | Door panels sold separately |
| Fisher and Paykel DD24DV2T9 N | 24-inch built-in | Professional look | 14 settings, 42 dBA | Stainless front, not panel ready |
| Fisher and Paykel DD24DDFTX9 N | 24-inch built-in | Modern flat front | 14 settings, 42 dBA | Contemporary front, not panel ready |
| Fisher and Paykel DD24DCTX9 N | 24-inch built-in | Tall drawers, low energy use | 14 settings, 42 dBA | Series 7 trim, not Series 9 |
How we selected
Only one maker builds double-drawer dishwashers, so this guide compares six Fisher and Paykel Double DishDrawer models. Each one has two independent drawers, 14 place settings, and six wash programs. We kept only models with published specs from pages we opened, and we left out the discontinued GE Cafe drawer model and single-drawer units.
Every model below comes from a Fisher and Paykel product page or a maker quick reference guide that we opened. The specs are current: noise figures are for the standard cycle on the top drawer, energy use is per year, and water use is per wash cycle with both tubs running.
We did not rank these models by hands-on use. The comparison rests on the specifications the maker publishes: place settings, plate size, noise, programs, modifiers, dimensions, and electrical needs. Because all six share the same 14-setting capacity, the real differences are height, noise, energy use, and front style, and the sections below make those differences plain.
Best dishwashers with two drawers
Six Double DishDrawer models made the list. All six hold 14 place settings with seven in each drawer, and all six wash each drawer on its own program. The differences are height, noise, energy use, and front style, so read the sections below with your opening height and your kitchen style in mind.
Fisher and Paykel DD24DAX9 N
The Fisher and Paykel DD24DAX9 N is a Series 7 Contemporary Double DishDrawer with 14 place settings, seven in each drawer. The maker lists a 43 dBA noise level on the top drawer, 265 kWh per year, and 3.44 gallons of water when both tubs run. It is the only model here with a shorter height range, which suits a standard opening.
The maker lists six wash programs: Delicate, Fast, Heavy, Medium, Normal eco, and Rinse. Each drawer runs its own program, so you can wash delicate glasses on top and heavy pots below at the same time. Round plates up to 11 inches fit in both the top and bottom drawers, and fold-down tines and foldable cupracks let you reshape the racks for larger items.
The unit measures 32 5/16 to 34 5/8 inches high, 23 9/16 inches wide, and 22 9/16 inches deep, and it runs on 110 to 120 volts at 10 amps and 60 Hz. The maker lists SmartDrive technology, a BLDC motor, fan-assisted drying, flood protection, and a delay start of up to 12 hours. A cutlery basket and a kickstrip come included, and the maker lists the unit as ADA compliant.
- Two independent drawers, seven settings each
- 43 dBA on the top drawer
- 265 kWh per year, 3.44 gal with both tubs
- Six wash programs per drawer
- ADA compliant as listed by the maker
- Delay start up to 12 hours
- 11-inch plates in both drawers, smaller than the tall models
- Shortest height range in this group
- No named Eco program, only Normal eco
Buy it if your opening is standard height and you want a double drawer unit with a lower height range. Skip it if you need 12.25-inch plates in the top drawer or a tall opening.
Fisher and Paykel DD24DCHTX9 N
The Fisher and Paykel DD24DCHTX9 N is a Series 7 Contemporary Tall Double DishDrawer with 14 place settings, seven in each drawer. The maker lists a 42 dBA noise level on the top drawer, 282 kWh per year, and 3.81 gallons when both tubs run. Tall drawers fit plates up to 12.25 inches on top and 11 inches below.
The maker lists six wash programs: Delicate, Eco, Fast, Heavy, Medium, and Rinse, plus three modifiers: Extra Dry, Quick, and Sanitize. The taller drawers give you room for large dinner plates and serving dishes, and pitch-adjustable tines let you tilt the rack to fit odd shapes. Adjustable height foldable cupracks move to fit mugs and glasses of different heights.
The unit measures 34 to 36 3/8 inches high, 23 9/16 inches wide, and 22 9/16 inches deep, and it runs on 110 to 120 volts at 10 amps and 60 Hz. The maker lists SmartDrive technology, a BLDC motor, fan-assisted drying, flood protection, and a delay start of up to 12 hours. A cutlery basket, a kickstrip, a knife clip, and a multipurpose clip come included.
- 12.25-inch plates in the top drawer
- 42 dBA on the top drawer
- Six programs plus three modifiers
- Pitch-adjustable tines
- Adjustable height foldable cupracks
- 3.81 gal with both tubs, the most water here
- 282 kWh per year, the second highest here
- Tall height needs a 34-inch opening
Buy it if you want tall drawers with large plates and the quietest 42 dBA running. Skip it if water use is your main concern or your opening is standard height.
Fisher and Paykel DD24DHTI9 N
The Fisher and Paykel DD24DHTI9 N is a Series 9 Integrated Tall Double DishDrawer built for a panel-ready front. The maker lists 14 place settings, seven in each drawer, a 43 dBA noise level on the top drawer, 286 kWh per year, and 3.6 gallons when both tubs run. Door panels are sold separately, so the front matches your cabinets.
The maker lists six wash programs: Delicate, Eco, Fast, Heavy, Medium, and Rinse, plus three modifiers: Extra Dry, Quick, and Sanitize. Tall drawers fit plates up to 12.25 inches on top and 11 inches below. A knock to pause feature lets you tap the front to pause the cycle, and an internal wash selector and keylock keep the controls hidden and locked.
The unit measures 34 to 36 3/8 inches high, 23 9/16 inches wide, and 22 1/2 inches deep, and it runs on 110 to 120 volts at 10 amps and 60 Hz. The maker lists SmartDrive technology, a BLDC motor, fan-assisted drying, flood protection, and a delay start of up to 12 hours. A kickstrip and a knife clip come included.
- Panel-ready front for a flush kitchen
- 12.25-inch plates in the top drawer
- Six programs plus three modifiers
- Knock to pause
- Internal wash selector and keylock
- Door panels sold separately
- 286 kWh per year, the highest here
- 43 dBA, louder than the 42 dBA models
Buy it if you want a dishwasher that disappears behind cabinet panels. Skip it if you do not want to source panels or you want the lowest energy use.
Fisher and Paykel DD24DV2T9 N
The Fisher and Paykel DD24DV2T9 N is a Series 9 Professional Tall Double DishDrawer with 14 place settings, seven in each drawer. The maker lists a 42 dBA noise level on the top drawer, 263 kWh per year, and 3.28 gallons when both tubs run. Its professional front and one-button start suit a kitchen with stainless appliances.
The maker lists six wash programs: Delicate, Eco, Fast, Heavy, Medium, and Rinse, plus three modifiers: Extra Dry, Quick, and Sanitize. Tall drawers fit plates up to 12.25 inches on top and 11 inches below. The maker lists a maximum inlet water temperature of 140 degrees Fahrenheit, which is worth noting if your water heater runs hot.
The unit measures 34 to 36 3/8 inches high, 23 9/16 inches wide, and 22 9/16 inches deep, and it runs on 110 to 120 volts at 10 amps and 60 Hz. The maker lists SmartDrive technology, a BLDC motor, fan-assisted drying, flood protection, and a delay start of up to 12 hours. An internal wash selector and keylock keep the controls tidy, and a cutlery basket, a kickstrip, and a knife clip come included.
- 42 dBA on the top drawer
- 263 kWh per year, the lowest here
- 3.28 gal with both tubs, the lowest here
- Six programs plus three modifiers
- One-button start
- Professional front style
- Stainless front, not panel ready
- Tall height needs a 34-inch opening
- Max inlet water temperature 140 degrees Fahrenheit
Buy it if you want the lowest energy and water use with a professional front. Skip it if you want a panel-ready front or a standard height opening.
Fisher and Paykel DD24DDFTX9 N
The Fisher and Paykel DD24DDFTX9 N is a Series 9 Contemporary Tall Double DishDrawer with 14 place settings, seven in each drawer. The maker lists a 42 dBA noise level on the top drawer, 263 kWh per year, and 3.28 gallons when both tubs run. Its flat contemporary front suits a modern kitchen without panels.
The maker lists six wash programs: Delicate, Eco, Fast, Heavy, Medium, and Rinse, plus three modifiers: Extra Dry, Quick, and Sanitize. Tall drawers fit plates up to 12.25 inches on top and 11 inches below. The maker lists a maximum inlet water temperature of 140 degrees Fahrenheit, and the same fan-assisted drying and flood protection as the rest of the Series 9 range.
The unit measures 34 to 36 3/8 inches high, 23 9/16 inches wide, and 22 9/16 inches deep, and it runs on 110 to 120 volts at 10 amps and 60 Hz. The maker lists fan-assisted drying, flood protection, and a delay start of up to 12 hours. An internal wash selector and keylock keep the controls hidden, and a cutlery basket, a kickstrip, and a knife clip come included.
- 42 dBA on the top drawer
- 263 kWh per year, tied for the lowest here
- 3.28 gal with both tubs, tied for the lowest here
- Six programs plus three modifiers
- Flat contemporary front
- Contemporary front, not panel ready
- Tall height needs a 34-inch opening
- Same specs as the Professional model, only the front differs
Buy it if you want the lowest energy and water use with a flat modern front. Skip it if you want a panel-ready front or a professional handle style.
Fisher and Paykel DD24DCTX9 N
The Fisher and Paykel DD24DCTX9 N is a Series 7 Contemporary Tall Double DishDrawer with 14 place settings, seven in each drawer. The maker lists a 42 dBA noise level on the top drawer, 265 kWh per year, and 3.44 gallons when both tubs run. It pairs tall drawers with the Series 7 front at a lower energy use than its Series 7 tall sibling.
The maker lists six wash programs: Delicate, Fast, Heavy, Medium, Normal eco, and Rinse, plus three modifiers: Extra Dry, Quick, and Sanitize. Tall drawers fit plates up to 12.25 inches on top and 11 inches below. Adjustable height foldable cupracks and fold-down tines let you reshape the racks, and pitch-adjustable tines tilt to fit odd shapes.
The unit measures 34 to 36 3/8 inches high, 23 9/16 inches wide, and 22 9/16 inches deep, and it runs on 100 to 120 volts at 10 amps and 60 Hz. The maker lists SmartDrive technology, a BLDC motor, fan-assisted drying, flood protection, and a delay start of up to 12 hours. A keylock keeps settings from changing, and a cutlery basket, a kickstrip, and a knife clip come included.
- 42 dBA on the top drawer
- 265 kWh per year, low for a tall model
- 12.25-inch plates in the top drawer
- Six programs plus three modifiers
- Pitch-adjustable tines
- Series 7 trim, not Series 9
- No named Eco program, only Normal eco
- Tall height needs a 34-inch opening
Buy it if you want tall drawers, quiet 42 dBA running, and low energy use in the Series 7 range. Skip it if you want the Series 9 front or a named Eco program.
Buying guide
Two drawers change how you load, run, and fit a dishwasher, so the checks below start with the opening and end with the running costs. All six models here share the same 14-setting capacity, so height, noise, energy use, and front style are what separate them. Work through the sections in order and you will land on the right model.
Measure the height first
Height is the first check because five of the six models here are tall. The DD24DCHTX9 N, DD24DHTI9 N, DD24DV2T9 N, DD24DDFTX9 N, and DD24DCTX9 N all measure 34 to 36 3/8 inches high, so they need an opening of at least 34 inches. The DD24DAX9 N is the exception at 32 5/16 to 34 5/8 inches high, which suits a standard opening.
Width is the same across the range at 23 9/16 inches, and depth is 22 9/16 inches on five models and 22 1/2 inches on the integrated DD24DHTI9 N. Measure the width, height, and depth of your opening before you shop, and check that the drawers open fully without hitting a nearby cabinet or island. A drawer that cannot open all the way is hard to load.
Match the drawer split to your daily load
Each drawer holds seven place settings, so one drawer covers breakfast and lunch while the other stays free for dinner. That split is the whole point of a double drawer unit: you run a small load without waiting for a full tub, and you keep the second drawer clean for the next meal. Households of one or two people will use one drawer most days.
For a family of four, both drawers together hold 14 place settings, which covers a full day of dishes in one run. Load the top drawer with glasses and small plates and the bottom drawer with larger plates and pots, since the tall models fit plates up to 12.25 inches on top and 11 inches below. If you often cook large meals, check that your biggest plates fit the top drawer before you buy.
Read the noise level per drawer
The maker lists noise for the top drawer on the standard cycle: 42 dBA on the DD24DCHTX9 N, DD24DV2T9 N, DD24DDFTX9 N, and DD24DCTX9 N, and 43 dBA on the DD24DAX9 N and DD24DHTI9 N. A single decibel is a small gap, but in a quiet kitchen you can hear it, so give the 42 dBA models a closer look if your kitchen opens onto the living room.
Both drawers running together will sound louder than one drawer alone, so think about when you run the dishwasher. If you run one drawer after lunch and the other after dinner, the noise stays low. If you run both drawers at night, the 42 dBA models are the safer pick for an open plan. Either way, the drawer design keeps noise lower than a full-size tub with a single large door.
Choose the front that fits your kitchen
Front style is the most visible difference in this range. The DD24DAX9 N, DD24DCHTX9 N, and DD24DCTX9 N wear the Series 7 Contemporary front, the DD24DDFTX9 N wears the Series 9 Contemporary front, the DD24DV2T9 N wears the Series 9 Professional front, and the DD24DHTI9 N is panel ready with no front of its own.
A panel-ready front disappears behind cabinet panels, which suits a flush kitchen where you want the dishwasher to vanish. A professional front with a handle suits a kitchen with stainless appliances and a bold look. A contemporary flat front suits a modern kitchen without panels. Pick the front that matches your other appliances, since you will see it every day.
Energy and water use across the range
Energy use runs from 263 kWh per year on the DD24DV2T9 N and DD24DDFTX9 N to 286 kWh per year on the DD24DHTI9 N. Water use runs from 3.28 gallons with both tubs on the two 263 kWh models to 3.81 gallons on the DD24DCHTX9 N. The gap between the lowest and highest models is small in a year, but it is worth noting if you run the dishwasher daily.
Running one drawer instead of two is the simplest way to save water and energy, since you only wash what is dirty. Use the Fast program for lightly soiled loads and the Heavy program only when the dishes need it. A delay start of up to 12 hours lets you run the dishwasher when it suits your household, and fan-assisted drying finishes the load without a long hot dry.
FAQ
These are the questions shoppers ask most about double-drawer dishwashers, answered from the specifications in this guide. If your question is about fit, start with the measuring section in the buying guide. If it is about daily use, the product sections above have the numbers for each model.
Can I run one drawer while the other stays empty?
Yes. Each drawer washes on its own, so you can run the top drawer for glasses and small plates while the bottom drawer stays empty. The maker describes this as independent wash, and it is the main reason to buy a double-drawer unit instead of a single tub.
Load the drawer you plan to run and leave the other one open or closed as you like. You can also run different programs in each drawer at the same time, so delicate glasses can wash gently on top while heavy pots wash below.
Do dishwashers with two drawers hold as much as a standard dishwasher?
Yes, close to it. The six models here each hold 14 place settings, seven in each drawer. A standard built-in dishwasher usually holds 12 to 16 place settings, so 14 sits in the middle of that range and covers a family of four in one run. That is enough for a full day of dishes for most households.
The split is what differs: a standard tub holds everything in one space, while a double-drawer unit splits the load into two seven-setting drawers. That split helps when you want to run a small load, and it does not cost you capacity when you run both drawers together.
What plates fit in the top drawer?
It depends on the model. The tall models fit round plates up to 12.25 inches in the top drawer and 11 inches in the bottom drawer. The DD24DAX9 N fits plates up to 11 inches in both drawers, since it is the standard-height model in this range. Check the plate size before you order, since the tall models and the standard model differ.
Measure your largest dinner plates before you buy, and check the top drawer first, since it is the one with the taller clearance on the tall models. Fold-down tines and pitch-adjustable tines help fit odd shapes, and foldable cupracks move to fit mugs and glasses.
Do I need panels for the integrated model?
Yes. The DD24DHTI9 N is panel ready, and the maker lists door panels as sold separately. You will need to source panels that match your cabinets, or ask your installer to fit them. The other five models come with their own fronts and need no panels. Panels are an extra step, so plan for them before install day.
Panel-ready models suit a flush kitchen where you want the dishwasher to blend into the cabinets. If you do not want to source panels, pick one of the Contemporary or Professional models instead, since their fronts are part of the unit.
How loud is a double drawer dishwasher?
The maker lists 42 dBA on the top drawer for four of the six models here, and 43 dBA for the other two, all on the standard cycle. That is quiet for a dishwasher, and it suits an open kitchen where the dishwasher runs while people talk or watch television.
Both drawers running together will sound louder than one drawer alone, but the gap is small. If noise is your main concern, start with the 42 dBA models: the DD24DCHTX9 N, DD24DV2T9 N, DD24DDFTX9 N, and DD24DCTX9 N.
Conclusion
For most kitchens, the DD24DCTX9 N is the balanced pick: tall height, 42 dBA running, and modest energy and water use. If you want a panel-ready front, the DD24DHTI9 N is the one to choose. Measure your opening height first, then match the front style to your kitchen and pick the drawer split your household will use every day.
Write Your Review
No reviews yet. Be the first to share your experience!