Key takeaways
- Compare high MERV furnace filters for covid 19 concerns, with pleated MERV 13 and MERV 14 picks, exact sizes, filter life, and fit notes to help you choose.
A furnace filter can only work on the air that passes through it, so the choice comes down to rating, size, and fit. The best furnace filters for covid 19 concerns are high MERV pleated filters that list fine particle capture. This guide compares six such filters, with exact sizes and maker specs, so you can pick one that suits your system.
Quick verdict
For most homes with a standard 1 inch slot, the Filtrete MPR 1900 MERV 13 filter is the round pick, while the MERV 14 MPR 2800 version suits homes that want the highest rating in the same size. Deep slots call for the Nordic Pure 5 inch carbon filter or the Aprilaire 213.
The short answer is to start with the slot, not the rating. A filter that does not seal in the housing lets air pass around the media, and that gap matters more than the difference between two high ratings. Measure the old filter and the slot, then match the nominal size and the actual size on the listing.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Filtrete MPR 1900 MERV 13 20x25x1 filter, 6-pack | Pleated 1 inch | Standard slots and set schedules | MERV 13, MPR 1900 | 1 inch slot only |
| Filtrete MPR 2800 MERV 14 20x25x1 filter, 2-pack | Pleated 1 inch | Highest rating in a 1 inch size | MERV 14, MPR 2800 | 2 filters per pack |
| Nordic Pure 20x25x5 Plus Carbon MERV 13 filter, 2-pack | Pleated 5 inch with carbon | Deep slots and odor control | MERV 13, actual depth 4-7/8 inch | Needs a 5 inch housing |
| Filterbuy 20x25x1 MERV 13 Smoke and Allergy Defense filter, 2-pack | Pleated 1 inch | Value MERV 13 in a common size | MERV 13, 16 pleats per foot | 2 filters per pack |
| Aprilaire 213 MERV 13 20x25x4 filter | Collapsible deep media | Aprilaire whole home systems | MERV 13, 6 to 12 month life | Fits Aprilaire cabinets only |
| Aerostar MERV 13 20x25x1 pleated filter, 6-pack | Pleated 1 inch | Bulk supply for regular changes | MERV 13, change every 60 to 90 days | 1 inch slot only |
How we selected
Selection drew on maker pages and listing pages that could be opened and read. A filter made the list only when the listing showed a MERV 13 or MERV 14 rating, a pleated or deep media design, and a size that fits a common home furnace slot in this guide.
The focus stayed on fine particle capture, not on health outcomes. MERV ratings describe how a filter handles particles of set sizes. No filter in this guide is presented as a way to stop illness, and no claim here goes beyond what the maker lists.
Best furnace filters for covid 19
The six filters below cover the most common home setups: standard 1 inch slots, deep 4 inch and 5 inch housings, and Aprilaire cabinets. Each section gives the exact name, the size as listed, the rating, the media, the change interval, and the limits that matter before ordering.
Filtrete MPR 1900 MERV 13 20x25x1 filter, 6-pack
This 3M pleated filter pairs a MERV 13 rating with an MPR 1900 score in the common 20x25x1 size, in a six pack. The maker describes it as a premium allergen, bacteria and virus filter, and lists 62% small particle capture for particles from 0.3 to 1 micron.
This filter suits a home with a standard 1 inch slot that wants a MERV 13 rating without moving to a deep media housing. The maker lists capture of smoke, cough and sneeze debris, bacteria and viruses, along with lint, household dust and pollen. The maker also lists the filter as certified asthma and allergy friendly, as outlined in report ASCR: 1197-01.
The listed size is 20x25x1 nominal, with an actual size of 19.69 x 24.69 x 0.78 inches. The material is polypropylene, the pack holds 6 filters, and the maker lists the product for residential use only. The maker lists a 3 month design and advises changing the filter at least every 90 days. The maker describes the design as exclusive Filtrete 3-in-1 technology from 3M, built to trap unwanted air particles while letting cleaner air flow through.
The main limit is the 1 inch depth. A 1 inch slot cannot hold a thicker filter, and a higher MERV rating adds resistance to air flow, so the system manual should allow MERV 13 before ordering. The actual size runs smaller than the nominal size, so measure first.
- MERV 13 rating with an MPR 1900 score
- Six filters in one pack for a full year of changes at the listed 90 day interval
- Maker lists 62% small particle capture for 0.3 to 1 micron particles, based on ASHRAE 52.2
- Actual size is smaller than the nominal size, so a loose housing can leave gaps
Buy if your home has a 20x25x1 slot and your system manual allows MERV 13. Skip if your slot is deeper than 1 inch, your manual calls for a lower rating, or you want a carbon layer for odor control.
Filtrete MPR 2800 MERV 14 20x25x1 filter, 2-pack
This 3M pleated filter carries the highest rating in this guide, with a MERV 14 rating and an MPR 2800 score in the same 20x25x1 size as the MPR 1900 pick. It arrives as a 2-pack, and the maker describes it as an ultrafine particle reduction filter for residential use.
This filter suits a home that wants the finest rated 1 inch option the maker lists, and that has a system manual allowing MERV 14. The maker describes the design with exclusive Filtrete 3-in-1 technology, and lists the media as electrostatically charged polypropylene.
The listed size is 20x25x1 nominal, with an actual size of 19.69 x 24.69 x 0.81 inches. The pack holds 2 filters. The maker lists the filter as a 3 month pleated 1 inch filter, with a change every 90 days. The maker part number is UF03-2PK-1E.
The main limit is air flow. MERV 14 media is denser than MERV 13 media, so a system that is not rated for it can show weak air flow or strain. The 2-pack also covers less time than a 6-pack, so a home that changes filters every 90 days will need to order more often.
- MERV 14 rating with an MPR 2800 score, the highest rating in this guide
- Electrostatic pleated polypropylene media
- Listed as a 3 month filter with a 90 day change interval
- Only 2 filters per pack
Buy if your system manual allows MERV 14 and your slot is 20x25x1. Skip if your manual lists a lower maximum rating, if your system already shows weak air flow, or if you want a larger pack.
Nordic Pure 20x25x5 Plus Carbon MERV 13 filter, 2-pack
This Nordic Pure filter is the deep media pick with a carbon layer, in a nominal 20x25x5 size with an actual size of 19-3/4 x 24-1/4 x 4-7/8 inches. It carries a MERV 13 rating, and the maker describes the media as electrostatically charged synthetic material with an added activated charcoal panel.
This filter suits a home with a 5 inch housing, such as a Trion Air Bear replacement slot, that wants MERV 13 filtration with added odor control. The maker lists the filter as capturing allergens, bacteria, mold spores, odors, pet dander, pollen, most smoke, and virus carriers. The maker describes the activated carbon as attracting and holding odorous gases and vapors, described as VOC.
The listed nominal size is 20x25x5, and the actual size is 19-3/4 x 24-1/4 x 4-7/8 inches. The maker lists an initial resistance of 0.26 at 300 fpm. The pack holds 2 filters, the maker part number is 20x25x5ABM13+C-2, and the maker describes MERV 13 as equivalent to MPR 2200-2400. The maker recommends changing 5 inch air filters every 3 to 6 months.
The main limit is fit. A 5 inch nominal size does not fit a 1 inch or 4 inch slot, and the actual depth of 4-7/8 inches must match the housing. The maker warns that 4 inch and 5 inch filters show a wider variance between nominal and actual size by maker, so measuring the old filter is the only way to be sure.
- MERV 13 rating in a deep 5 inch size for longer service life
- Maker lists initial resistance of 0.26 at 300 fpm
- Maker recommends a change every 3 to 6 months
- Actual depth of 4-7/8 inches must be matched to the housing
Buy if your housing takes a 20x25x5 filter with an actual depth near 4-7/8 inches. Skip if your slot is 1 inch or 4 inches deep, or if you have not measured the actual depth of the filter you are replacing.
Filterbuy 20x25x1 MERV 13 Smoke and Allergy Defense filter, 2-pack
This Filterbuy filter is the value MERV 13 pick in the common 20x25x1 size, sold as a 2-pack with a blue frame. The maker lists MERV 13 synthetic media, comparable with MPR 1900 and FPR 10, and describes the media as electrostatically charged with 16 pleats per foot.
This filter suits a home that wants MERV 13 filtration in a standard 1 inch slot and is happy to order 2-packs as needed. The maker lists the media as able to trap 98% of dust particles, along with bacteria, smoke, smog, lint, pollen, mold, and dander, without impacting air flow. The maker describes the construction as beverage board frames with dual wire backings, built to endure temperatures up to 200 degrees Fahrenheit and withstand exposure to moisture.
The listed size is 20x25x1 nominal, with an actual size of 19.50 x 24.50 x 0.75 inches. The pack holds 2 filters, the model number is AFB20x25x1M13pk2, and the maker lists the filter as made 100% in the United States with recyclable materials. The maker lists the media as lasting 3 times longer than fiberglass models and advises replacing every 90 days for best results.
The main limit is the pack size. Two filters cover about six months at the listed 90 day interval, so a home that wants a full year of changes needs more packs. The 1 inch depth also means more frequent changes than a deep media filter.
- MERV 13 rating with 16 pleats per foot for more media surface
- Maker lists 98% capture of dust particles
- Made in the United States with recyclable materials
- Only 2 filters per pack, so a year of changes needs more packs
Buy if you want a MERV 13 filter in the 20x25x1 size and change filters every 90 days. Skip if you want a deep media filter with a longer interval, or a larger pack in one order.
Aprilaire 213 MERV 13 20x25x4 filter
This Aprilaire filter is the cabinet pick in this guide, made for Aprilaire whole home air cleaner systems. It carries a MERV 13 rating, a nominal size of 20 x 25 x 4 inches, and an actual size of 20.6 x 26.63 x 4 inches, with a listed filter life of 6 to 12 months.
This filter suits a home that already has a compatible Aprilaire air cleaner cabinet, including models 1210, 1620, 2210, 2216, 3210, and 4200, as well as model 2200 with the Aprilaire 1213 Upgrade Kit. The maker describes the media as pleated, collapsible, and expandable, with Self-Seal technology that helps the filter seal in the cabinet. The maker lists the filter as performance tested to ASHRAE 52.2, and lists air flow of 1200 CFM. The maker lists the filter as reducing dust, pollen, mold spores, bacteria, pet dander, smoke and smog, virus carriers, and other common airborne allergens.
The listed nominal size is 20 x 25 x 4 inches, and the actual size is 20.6 x 26.63 x 4 inches, which is larger than nominal because of the Self-Seal design. The pack size is 1, the part number is 213, and the maker lists the filter life as 6 to 12 months. The maker describes the filter as arriving flat and expanding like an accordion during installation, with no tools needed, and with interlocking rails that slide into the track of the air cleaner housing.
The main limit is compatibility. This filter fits Aprilaire cabinets, and it is not a drop in replacement for a standard 20x25x4 slot from another maker, because the actual size is larger than nominal. A home without an Aprilaire cabinet cannot use it.
- MERV 13 rating with a listed life of 6 to 12 months
- Maker lists air flow of 1200 CFM
- Performance tested to ASHRAE 52.2, as the maker lists
- Actual size is larger than nominal, so it cannot be swapped with other brands by size alone
Buy if your home has a compatible Aprilaire cabinet and you want a long life MERV 13 filter. Skip if your system takes a standard 1 inch or 4 inch filter, or if you do not have an Aprilaire air cleaner cabinet.
Aerostar MERV 13 20x25x1 pleated filter, 6-pack
This Aerostar filter is the bulk MERV 13 pick in the common 20x25x1 size, sold as a box of 6 pleated filters for home systems. The maker describes the media as electrostatically charged synthetic material, and lists it as comparable to MPR 1500 to 1900 and FPR 10.
This filter suits a home that changes filters often and wants a six pack on hand, so a fresh filter is always ready. The maker lists the media as capturing allergens between 0.3 and 1.0 microns, including lint, dust mites, mold spores, pollen, pet dander, smoke, viruses, and bacteria. The maker lists the brand as manufactured in the United States by Filtration Group.
The listed size is 20x25x1 nominal, with an actual size of 19 1/2 x 24 1/2 x 3/4 inches. The pack holds 6 filters, and the maker lists the filter as a pleated 1 inch design for air conditioner, furnace, and HVAC use. The maker recommends changing the filter every 60 to 90 days during normal times of year, and increasing frequency to 30 days during peak summer and winter months when the unit is working the hardest.
The main limit is the change interval. The maker lists 60 to 90 days, which is shorter than the 90 day interval listed for some other 1 inch filters, and the 30 day peak interval means a six pack can run out fast in a hard working system. The 1 inch depth also means this filter cannot serve a deep media housing.
- MERV 13 rating in a six pack for regular changes
- Maker lists capture of allergens between 0.3 and 1.0 microns
- Manufactured in the United States by Filtration Group, as the maker lists
- Listed change interval of 60 to 90 days, and 30 days in peak months
Buy if you want six MERV 13 filters in the 20x25x1 size. Skip if your slot is deeper than 1 inch, or if you want the longest interval between changes.
Buying guide
A good furnace filter choice starts with the housing, then the rating, then the change schedule. The sections below walk through each step in order, so the filter you order fits the slot, suits the system, and gets changed before it loads up with dust.
Match the filter size to the slot before you order in the best furnace filters for covid 19
Filter sizes are nominal, which means the number on the box is larger than the filter itself. The filters in this guide show actual sizes such as 19.69 x 24.69 x 0.78 inches for a 20x25x1 filter, and 19-3/4 x 24-1/4 x 4-7/8 inches for a 20x25x5 filter.
Measure the old filter and the slot, and compare both numbers with the actual size on the listing. A filter that is too small leaves gaps at the edges, and air that slips around the media is air that never gets filtered.
What MERV rating fits a home focused on covid 19
MERV stands for Minimum Efficiency Reporting Value, and higher numbers describe finer particle capture in lab testing. The filters in this guide carry MERV 13 or MERV 14, which are high ratings for a home system. MERV 13 is the common pick for homes that want fine particle capture.
MERV 14 is the step above it for systems that allow the denser media. No MERV rating describes a health outcome, and no filter in this guide is presented as a way to stop illness. The right rating is the highest one the system manual allows while keeping air flow strong.
Choose between 1 inch and deep pleat filters
A 1 inch pleated filter fits the standard slot found in most homes, and it is the easiest type to change. Deep pleat filters in 4 inch and 5 inch sizes hold more media, so they can run longer between changes and often show lower resistance for the same rating.
The trade is fit: a deep filter needs a deep housing or a media cabinet, and it cannot be cut down to fit a 1 inch slot. The Aprilaire 213 in this guide is a deep collapsible media filter that fits only Aprilaire cabinets, and the Nordic Pure 5 inch filter fits a 5 inch housing. If the home has a deep housing, the longer interval and larger media area are worth using.
Plan the change schedule around your system
The makers in this guide list change intervals from 30 days in peak months to 12 months for deep media filters. A 1 inch filter is commonly listed at 90 days for home use, while the Aerostar lists 60 to 90 days and 30 days in peak summer and winter months.
Deep filters run longer: the Nordic Pure 5 inch filter lists 3 to 6 months, and the Aprilaire 213 lists 6 to 12 months. Homes with pets, heavy dust, or long heating and cooling seasons load a filter faster, so the calendar is only a starting point. Look at the filter each month, and change it when the media looks gray and loaded.
Check airflow needs with your system manual
Higher MERV media is denser, and denser media adds resistance to air flow. The Nordic Pure 5 inch filter lists an initial resistance of 0.26 at 300 fpm, which shows how makers state resistance in plain numbers. Before moving from a low rating to MERV 13 or MERV 14, read the furnace manual for the highest rating it allows.
If the manual is missing, ask an HVAC technician for the rating range. Signs of a filter that is too dense include weak air flow from vents and a filter that bows inward when the blower runs.
FAQ
These answers cover the questions that come up most often when a home moves to a high MERV furnace filter. Start with the question that matches your setup. Each answer stays on what the makers list and what the rating system describes, without claims about health outcomes.
Can a furnace filter remove the virus that causes covid 19
No filter in this guide is described by its maker as a way to stop illness, and this article makes no such claim at all. What the makers do list is particle capture: the Filtrete MPR 1900 lists 62% small particle capture for particles from 0.3 to 1 micron.
A furnace filter only works on air that passes through it, so it cannot act on air in a room that never reaches the return vent.
Is MERV 13 enough for fine particle capture
MERV 13 is a high rating for a home system, and it is the rating most of the filters in this guide carry. The makers of MERV 13 filters list capture of fine dust, smoke, mold spores, pollen, pet dander, bacteria, and particles that can carry viruses.
How often should a furnace filter be changed
Follow the interval the maker lists for the filter you buy. The 1 inch filters in this guide list 90 days, with the Aerostar listing 60 to 90 days and 30 days in peak months. The Nordic Pure 5 inch filter lists 3 to 6 months, and the Aprilaire 213 lists 6 to 12 months.
Will a high MERV filter strain a furnace
A high MERV filter can add resistance to air flow, and that is why the system manual matters. Denser media makes the blower work harder to pull air through, and a filter that is too dense for the system can cut air flow, raise run times, and shorten the life of the equipment.
Deep media filters often handle a high rating with less resistance than a 1 inch filter, because they hold more media area.
What size filter does a furnace need
The furnace needs the size printed on the old filter and on the housing, matched to the actual size on the listing. Common sizes in this guide include 20x25x1, 20x25x4, and 20x25x5, but homes use many sizes, so never guess. Read the size from the edge of the old filter before you order.
Cabinet filters such as the Aprilaire 213 use their own actual size, which is larger than nominal, so they cannot be swapped with other brands by nominal size alone.
Conclusion
Start with the slot, pick the highest MERV rating the manual allows, and change the filter on the interval the maker lists. For a standard 1 inch slot, the Filtrete MPR 1900 is the round pick, and the MPR 2800 adds the highest rating. Deep housings call for the Nordic Pure 5 inch filter, and Aprilaire cabinets call for the 213.
Write Your Review
No reviews yet. Be the first to share your experience!