Key takeaways
- Compare kitchen sinks for quartz countertops on mount type, material, bowl size and cabinet size, from quartz composite and fireclay to cast iron and steel.
Quartz countertops are usually paired with sinks that mount below the slab or sit in front of it as an apron, and the wrong bowl size or cabinet demand can stall a finished kitchen. These kitchen sinks for quartz countertops were each read on an opened product page, with mount, material and cabinet figures taken from those pages.
Quick verdict
For a color matched quartz on quartz pairing, the two Elkay Quartz Classic models lead this list: a 33 inch double bowl with a low Aqua Divide for households that wash and soak at the same time, and a 33 inch single bowl in Greystone for one open work space.
The Kraus Turino brings a fireclay apron front in glossy white for a farmhouse layout, and the Kohler Whitehaven is the enameled cast iron option at 35-3/4 inches, the widest sink here, with a self-trimming apron. The Delta Lorelai is the stainless steel workstation, with a ledge, a cutting board and a roll-up rack in the kit. Every sink in this guide is an undermount or apron front design, which is the mounting family a quartz slab supports without a rim sitting on top of the stone. Cabinet demand is the shared constraint: four of the five state a 36 inch minimum cabinet, and the Turino page read for this guide does not state a cabinet figure at all.
| Product | Material and mount | Size | Minimum cabinet | Main limit |
|---|---|---|---|---|
| Elkay Quartz Classic Double Bowl Undermount Sink with Aqua Divide | Quartz composite, undermount | 33 x 19 x 10 in | 36 in | Two bowls split the work space |
| Elkay Quartz Classic ELGRU13322GS0 Single Bowl Undermount Sink | Quartz composite, undermount | 33 x 18-7/16 in, 9-7/16 in deep | 36 in | Sink only, accessories sold separately |
| Kraus Turino Farmhouse Apron Front Fireclay Single Bowl Kitchen Sink KFR1-33GWH | Fireclay, apron front | 33 x 18.25 in | Not stated on page read | Few specs on the page read |
| Kohler Whitehaven Undermount Single-Bowl Farmhouse Kitchen Sink K-6489 | Enameled cast iron, undermount farmhouse | 35-3/4 in, bowl depth 9 in | 36 in apron base | Drain and strainer sold separately |
| Delta Lorelai Workstation Undermount Stainless Steel Single Bowl Sink 95B932-32S-SS | 16 gauge stainless steel, undermount | 32 x 19 x 9.5 in | 36 in | Workstation ledge shapes the bowl rim |
How we selected
Each sink was read on an opened product page or maker page, and only what that page states is used here: the mount type, the material, the overall and bowl dimensions, the minimum cabinet size where listed, and the parts the maker includes or sells separately.
Quartz countertops set the selection rules. The slab is cut for a specific sink, so the list favors undermount and apron front models whose makers publish full dimensions and cabinet minimums, and it records gaps where a page does not state a figure. This keyword is broader than undermount alone, so the set mixes two quartz composite bowls, a fireclay apron front, an enameled cast iron farmhouse sink and a stainless workstation, each with its own page behind it. No model in this guide repeats the undermount for quartz list written for the narrower keyword in this series.
- Opened product page or maker page for every sink
- Mount type and material stated on the page
- Dimensions and cabinet size used only where the page states them
- Included parts separated from parts sold separately
Verified kitchen sinks for quartz countertops
Five sinks follow, ordered from the closest material match to a quartz slab through to the steel workstation. Dimensions are in inches and come from the opened pages; where two figures on one page conflict, the entry uses the spec table figure and the conflict is part of the record behind this guide.
Elkay Quartz Classic Double Bowl Undermount Sink with Aqua Divide
This is the quartz on quartz pairing in its double bowl form. The page lists a quartz composite sink crafted from natural quartz, installed beneath the countertop, with two equal D-shape bowls, rear center drains of 3.5 inches, and a low center divider the maker calls Aqua Divide.
Overall dimensions are 33 x 19 x 10 inches, with each bowl listed at 15.17 inches long, 16.77 inches wide and 10 inches deep, a minimum cabinet size of 36 inches, and a weight of 37 lb. Finishes listed are Black, Dusk Gray, Greystone and White. The maker describes a nonporous structure that food and liquid will not stick to, a surface that washes clean with soapy water, and a body molded from fine quartz sand, with heat resistance listed up to 535 degrees Fahrenheit.
The low divider is the deciding feature. Elkay states it lets pan handles extend over the center and makes washing large items, such as baking sheets, easier across both bowls, while the equal bowls can still be used independently for washing, soaking, rinsing and drying. The trade is depth of commitment: a double bowl cutout in a quartz slab is a permanent layout choice, and each bowl is narrower than a single bowl of the same overall size.
- Pros: quartz composite color range; 10 in deep bowls; low divider for long items; nonporous surface per maker
- Cons: 36 in cabinet required; double bowl layout is fixed at cutout; heavy at 37 lb for handling during install
- Buy if: two work zones and a quartz color match are both priorities
- Skip if: one wide open bowl is the main need
Elkay Quartz Classic ELGRU13322GS0 Single Bowl Undermount Sink
The single bowl sibling trades the divider for one open space. The brand page lists the Greystone finish, a quartz body, undermount installation, sink dimensions of 33 x 18-7/16 inches, a depth of 9-7/16 inches, a minimum cabinet size of 36 inches, and a weight of 33 lb.
The maker describes a smooth, nonporous surface that resists stains and heat, a large single bowl with uninterrupted space for washing and stacking dishes, an offset drain that frees space on the bowl bottom and in the cabinet below, and a material that is naturally sound-deadening. Heat resistance is listed up to 535 degrees Fahrenheit, matching its double bowl sibling. One caution from the page itself: a second dimensions field on the same page gives a different depth figure, so the spec table figures above are the ones to hand a fabricator, and the physical sink should be on site before the slab is cut.
Included components are listed as sink only. The maker names coordinating accessories sold separately: a bottom grid, a drain, and a disposal flange with strainer and rubber stopper, each with its own model number on the page. Budget and plan for those parts separately, because the grid is the piece that keeps cookware off the composite surface day to day.
- Pros: one open 33 in bowl; offset drain; lighter than the double at 33 lb; nonporous surface per maker
- Cons: accessories sold separately; two depth figures appear on the page; 36 in cabinet required
- Buy if: a single quartz composite bowl with room for roasters and sheet pans is the goal
- Skip if: a complete kit in one box matters more than the open bowl
Kraus Turino Farmhouse Apron Front Fireclay Single Bowl Kitchen Sink KFR1-33GWH
The Turino is the farmhouse entry: a fireclay single bowl with an apron front, listed at 33 inches long and 18.25 inches wide in glossy white. An apron front suits a quartz countertop run because the sink front replaces a section of cabinet face, and the slab bridges over the bowl.
The listing page read for this guide is brief. It states the name, the fireclay material, the single bowl, the apron front farmhouse style and the two dimensions above, and it showed the sink in stock. It does not state a bowl depth, a minimum cabinet size, a weight, or a list of included parts, so none of those figures appears here. A buyer shortlisting this sink should pull the maker spec sheet for the exact model before ordering, and should have the physical sink measured before any quartz is cut, because apron front work is fitted to the individual sink and cabinet together.
What the page does support is the design case: glossy white fireclay against a quartz slab is the classic farmhouse contrast, and a single bowl at 33 inches wide is a family size sink. Treat this entry as a style led option with homework attached, in contrast to the fully documented Elkay and Delta pages in this guide.
- Pros: fireclay apron front; glossy white finish; 33 in single bowl; in stock on the page read
- Cons: page states few specs; no cabinet figure given; apron installs need exact fitting
- Buy if: the farmhouse look leads and the spec sheet will be gathered before ordering
- Skip if: a fully documented page is needed to commit today
Kohler Whitehaven Undermount Single-Bowl Farmhouse Kitchen Sink K-6489
The Whitehaven is the enameled cast iron option, and the largest sink here at 35-3/4 inches. The maker spec sheet lists an undermount single bowl farmhouse design that fits a minimum 36 inch apron sink base cabinet, with a bowl depth of 9 inches and a Self-Trimming apron that overlaps the cabinet face.
The sheet gives the working dimensions a fabricator needs: bowl area 30-3/4 inches long and 18-1/16 inches wide, a drain hole of 3-5/8 inches, overall drawing figures of 35-11/16 inches long, 21-9/16 inches wide and 9-5/8 inches high, and an apron figure of 8-13/16 inches. The material is KOHLER enameled cast iron with an acid-resistant enamel finish, in the maker wording, and the color list runs from White and Sea Salt through Biscuit, Dune, Ice Grey, Thunder Grey, Black Black and Truffle to Teal, Fresh Green and Aspen Green. Cutout templates are listed as included, and the bowl slopes toward an offset drain, which the maker describes as a way to limit water pooling and add storage room below.
The separate parts list matters here too: the spec sheet states the sink drain with strainer is sold separately, and it names sink racks and a drain and strainer basket as required or recommended companions. Cast iron is also the heavy route to an apron front, so cabinet support and a two person lift belong in the install plan, even though the sheet read for this guide does not print a weight.
- Pros: full maker dimensions; wide color list; self-trimming apron; templates included
- Cons: drain and strainer sold separately; needs a 36 in apron base cabinet; cast iron handling is a two person job
- Buy if: an enameled cast iron farmhouse sink with full documentation is the priority
- Skip if: the cabinet run has no apron base or the slab is already cut for a smaller sink
Delta Lorelai Workstation Undermount Stainless Steel Single Bowl Sink 95B932-32S-SS
The Lorelai is the steel workstation: an undermount single bowl in 16 gauge stainless steel with a built-in WorkFlow ledge, outer dimensions of 32 x 19 x 9.5 inches, a bowl of 30 x 16 x 9 inches, and a minimum cabinet size of 36 inches, all from the maker page.
The kit is the fullest in this guide. Delta lists an acacia cutting board with a mobile device holder, sized 12 x 16.75 x 0.75 inches, a roll-up dish drying rack with a removable utensil holder, a silicone drying mat, a stainless steel bottom grid, and a stainless steel drain assembly with a removable cover, plus mounting hardware and a cut-out template. The drain opening is 3.88 inches and the drain sits at the rear, offset. The maker describes a SatinSheen finish that is easy to maintain, NoiseDefend soundproofing pads on all sides of the sink, an anti-condensation undercoating, channel grooves with a sloped bottom, and rounded EZClean corners. For the roll-up rack, the maker lists a capacity of up to 85 lb and heat resistance to 400 degrees Fahrenheit.
Against a quartz slab, the case is contrast and work space: the ledge turns the bowl into a prep station, which suits a quartz island run where counter space is shared. The maker also answers, on the same page, that any garbage disposal fits its stainless steel sinks, which settles the disposal question for this model in the maker wording.
- Pros: full accessory kit included; 16 gauge steel; rear offset drain; sound pads and undercoating listed
- Cons: ledge narrows the rim profile; 36 in cabinet required; steel shows water marks more than composite
- Buy if: a workstation ledge and a complete kit matter most
- Skip if: a plain bowl rim with no ledge is the preference
Buying guide
Pairing a sink with a quartz countertop is mostly a fabrication decision made once. The sections below cover the checks that decide whether the pairing works: the mount, the cabinet, the cutout order, the material behavior next to stone, and the parts that are not in the box.
Mount type is set by the slab
Every sink in this guide mounts under the quartz or presents an apron through the cabinet face, and that is not a coincidence. A quartz slab is cut and polished for a specific opening, and an undermount or apron front sink keeps the polished edge visible and leaves no rim sitting on the stone surface.
The practical difference between the two is in the cabinet, not the countertop. An undermount bowl hangs below the slab inside a standard base cabinet of the stated minimum size. An apron front sink needs an apron base cabinet or a modified cabinet front, as the Whitehaven sheet states with its 36 inch apron sink base requirement. Decide the mount before the cabinet order, not after it.
Cabinet minimums cluster at 36 inches
Four of the five pages state a 36 inch minimum cabinet size, for sinks from 32 to 35-3/4 inches wide. That pattern is the real planning number for a quartz run: a 33 inch sink does not fit a 33 inch cabinet, because the bowl, the clips and the faucet lines all need room the bowl width does not show.
The Turino page states no cabinet figure, which is exactly the kind of gap to close before ordering rather than at install. Measure the inside of the existing cabinet, not the door front, and compare it with the stated minimum for the exact model. For a remodel that keeps its cabinets, this single check rules sinks in or out faster than any other spec in this guide.
Have the sink on site before the slab is cut
A quartz cutout is permanent, and two entries in this guide show why the physical sink matters. The Elkay single bowl page carries two different depth figures in different fields, and apron front sinks are fitted to the individual unit and cabinet together, as the Turino entry notes.
The working rule is simple: the fabricator cuts from the template and the sink itself, not from a web page. Kohler lists cutout templates as included with the Whitehaven, and Delta lists a cut-out template in the Lorelai kit. Where a template is included, it travels with the sink to the fabricator. Where dimensions conflict across a page, the sink in hand settles the question.
Material behavior next to quartz
Quartz composite is the closest behavioral match to the countertop itself. Both Elkay pages describe nonporous surfaces, and the double bowl page adds that food and liquid will not stick to the structure and that the sink washes clean with soapy water, with heat resistance listed up to 535 degrees Fahrenheit for both models.
Steel and cast iron behave differently in daily use. The Lorelai maker page leans on sound pads, an anti-condensation undercoating and a finish described as easy to maintain, because a steel bowl under a stone slab is the loudest and most condensation prone build here. The Whitehaven enamel is described by its maker as acid-resistant. None of these materials needs a rim seal against the quartz in the way a drop-in rim does, which is one more reason the mount family in this guide suits stone.
Count the parts that are sold separately
Three of the five entries separate the sink from parts a buyer will assume are included. The Elkay single bowl is listed as sink only, with a grid, a drain and a disposal flange named as separate purchases. The Whitehaven sheet states its drain with strainer is sold separately and names racks as companions.
The Lorelai is the counter example, with its grid, drain assembly, cutting board, roll-up rack and drying mat in the kit. When comparing two sinks for the same quartz opening, list the full parts set for each, grid, drain, flange, strainer, before comparing anything else, because the completion parts are where an apparently simple choice gains its extra orders and its install day delays.
FAQ
The questions below are the ones a quartz countertop pairing raises most often, answered from the pages read for this guide. Where a page does not state the figure a question needs, the answer says so rather than borrowing a number from a different model in the same line.
Can a drop-in sink be used on a quartz countertop
No sink in this guide is a drop-in, and that reflects how quartz slabs are usually worked: the opening is cut and polished for an undermount bowl or an apron front, so the finished edge of the stone stays visible and the sink carries no rim load on the slab surface.
That is a pairing convention, not a claim that a drop-in cannot physically sit on quartz. It means a buyer set on a drop-in should settle that with the fabricator before the slab is ordered, because changing mount families after cutting is not an option. The five sinks here were selected inside the mount family the pages document for stone work.
Which kitchen sinks for quartz countertops match the slab color
The two Elkay Quartz Classic models are the color matching route. The double bowl lists Black, Dusk Gray, Greystone and White finishes, and the single bowl entry here is the Greystone variant, so a gray or white quartz slab can be paired with a same family tone in the bowl.
The Whitehaven offers the widest color list in this guide, running through Sea Salt, Biscuit, Dune, Ice Grey, Thunder Grey, Black Black and Truffle to green and teal tones, in enameled cast iron rather than composite. The Turino glossy white and the Lorelai stainless finish are contrast choices, not matches, and both work by standing apart from the slab instead of blending with it.
How deep are the bowls in this guide
Depths stated on the opened pages are 10 inches for the Elkay double bowl, 9-7/16 inches for the Elkay single bowl, 9 inches of bowl depth for the Whitehaven, and 9.5 inches overall with a 9 inch bowl for the Lorelai. The Turino page does not state a bowl depth, as its entry records.
Depth interacts with the quartz pairing in one specific way: a deeper bowl under a thick slab lowers the working floor of the sink, which tall users feel at the back and short users feel at the shoulder. The stated range here, 9 to 10 inches, is a family kitchen range. Anyone between heights in one household should weigh the 9 inch bowls against the 10 inch double before the cutout fixes the choice.
Do these sinks include drains and grids
Only the Lorelai includes both in its kit, with a stainless steel bottom grid and a drain assembly with a removable cover listed by the maker. The Elkay single bowl is sink only, the Whitehaven states its drain with strainer is sold separately, and the Elkay double bowl and Turino pages do not list included drain parts.
A grid is worth planning for in any of these materials. It keeps cookware off a composite or enamel surface, and in a steel bowl it quiets contact and lifts dishes for draining, as the Lorelai page describes for its grid. Add the grid and drain for the exact model to the order list at the same time as the sink, not after the slab appointment is booked.
What cabinet does an apron front sink need
The Whitehaven spec sheet answers for its model: a minimum 36 inch apron sink base cabinet, with the distance from the top edge of the cabinet to the top of the cabinet door at least 9 inches to install the sink, and a Self-Trimming apron that overlaps the cabinet face.
The Turino, the other apron front here, states no cabinet figure on the page read, so its requirement has to come from the maker spec sheet for the exact model before cabinets are ordered. The general point stands across both: an apron front is a cabinet decision first and a countertop decision second, and the quartz cut follows the cabinet and sink fitting, not the other way around.
Conclusion
For most quartz countertops, the Elkay Quartz Classic single bowl is the balanced pick: a 33 inch nonporous quartz bowl, an offset drain and a documented 36 inch cabinet figure. Choose the Aqua Divide double for two work zones, the Whitehaven for cast iron, and the Lorelai when a workstation kit leads the brief.