Key takeaways
- Granite counters need a sink that fits the cutout and cabinet. Compare six undermount sinks on size, material, bowl layout, and included parts in this guide.
Granite counters are cut to a template, so the sink choice has to be right before the slab is drilled and polished. This guide compares undermount kitchen sinks for granite countertops on bowl size, cabinet fit, material, and included parts, so you can match a sink to your stone and to the way you wash.
Quick verdict
For most granite counters, start with minimum cabinet size and bowl layout, then pick a material. The Kraus Quarza KGD-442 gives a granite composite double bowl, the Kraus KHU103-32 gives a 60/40 steel split, and the Blanco Precis Super Single gives one large Silgranit bowl for sheet pans.
All six sinks below mount under the counter, which suits granite well: the polished stone edge stays visible and the rim of the sink does not sit on top of the slab. The set covers three material families. Granite composite and Silgranit bowls bring color through the body, stainless steel brings a thin wall and grids in the box on the Kraus models, and each family handles daily washing in a different way.
Cabinet fit is the hard limit in this group. Five sinks state a 36 inch minimum cabinet size, and one, the Kraus KHU110-27, states a 30 inch minimum. Bowl depth runs at 10 inches on the steel models and 9.5 inches on the Blanco models listed here, with the Quarza at 10-5/8 inches overall height.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Kraus Quarza KGD-442-PST1 | Granite composite double basin, dual mount | Stone look with two bowls | 60/40 split, 33 x 22 inches | Needs a 36 inch cabinet |
| Kraus Standart PRO KHU110-27 | Stainless steel single basin | Smaller cabinets, right drain | 27 x 19 inches, 30 inch cabinet | No basket strainer listed |
| Kraus Standart PRO KHU103-32 | Stainless steel double basin | Unequal bowls for wash and rinse | 60/40 split, 32 x 19 inches | Needs a 36 inch cabinet |
| Kraus Standart PRO KHU104-33 | Stainless steel double basin | Reversed unequal split | 40/60 split, 32-3/4 x 19 inches | Heaviest sink in this group |
| Blanco Precis Super Single 441478 | Silgranit granite composite single bowl | One extra large bowl | 32 x 19 inches, 30 x 17 inch bowl | Strainer sold separately |
| Blanco Performa 440069 | Silgranit granite composite double bowl | Deep equal bowls | 50/50 split, 10 inch depth | Strainer sold separately |
How we selected
Each sink below comes from a maker or listing page that states the mount type, the outside dimensions, the bowl dimensions, and the minimum cabinet size. Pages that left out cabinet size or bowl depth were set aside, and only sinks listed as undermount models with current stock notes stayed in the group for this granite focused set.
The mix was built around the decisions a granite counter owner faces. Granite is heavy and the cutout is permanent, so support and fit lead the selection. Material comes next, because a composite bowl reads as stone next to granite, while a steel bowl reads as a working metal basin. Bowl layout runs from a compact 27 inch single bowl to 33 inch double bowls, so both small and large stone runs have an option that fits the stated cabinet minimums.
Included parts were read from each listing page rather than assumed. The Kraus steel sinks list bottom grids in the kit, the Quarza lists mounting hardware with strainers described in its kit contents, and the Blanco sinks list strainers and clips as sold separately. Those differences are stated in each product section, because they change the full cost of the install and the parts your plumber needs on the day.
Undermount kitchen sinks for granite countertops compared
The six product sections below follow the same order: who the sink suits, why it fits a granite counter, the specs stated on its page, and the limits to weigh before ordering. Dimensions are outside measurements unless a line says basin or bowl, and cabinet figures are the minimum sizes the maker or listing page states for each model.
Kraus Quarza KGD-442-PST1 granite composite sink
This sink suits a kitchen that wants the look of stone in the bowl itself, with two basins for split tasks. The listing page describes a granite sink made from 80 percent natural quartz, a dual installation for undermount or drop-in fit, and a 60/40 basin split. Mounting hardware is listed as included in the kit contents.
The outside size is 33 inches long by 22 inches wide, with a height of 10-5/8 inches. The left basin is listed at 18 inches by 11-7/8 inches by 10 inches deep. The listing page states a minimum cabinet size of 36 inches, one faucet hole, and a center drain location. The kit contents describe two matching colored strainers, a cut-out template, and installation and care instructions.
The maker describes the surface as smooth, resistant to scratches, scuffs, and stains, and UV-stable so the color holds. A rear-set drain is described as a way to gain workspace in the sink and storage space in the cabinet below. Against granite, a composite bowl in black gives a close tonal match with dark stone and a clear contrast with light stone.
- Pros: granite composite made from 80 percent natural quartz, per the listing page
- Pros: 60/40 split gives one larger working basin
- Pros: dual mount design allows undermount or drop-in fit
- Cons: needs a 36 inch minimum cabinet
- Cons: 22 inch width needs a deep counter run
Buy if you want a stone look bowl with two basins and your cabinet and counter depth meet the stated sizes. Skip if your counter run is shallow or your cabinet is under 36 inches, since the footprint is the joint widest in this group.
Kraus Standart PRO KHU110-27 stainless steel sink
This sink suits a smaller granite installation where the base cabinet is the limiting factor. The maker lists 16 gauge stainless steel, an undermount fit, and a single basin with a right drain location. It is the only sink in this group with a 30 inch minimum cabinet size, and a bottom grid comes in the kit.
The outside size is 27 inches long by 19 inches wide, with a height of 10 inches. The basin measures 25 inches by 17 inches, with a listed basin depth of 10.5 inches. The listing page states a minimum cabinet size of 30 inches, a drain connection of 3-1/2 inches, and a product weight of 23 lbs. The kit lists a protective bottom grid, a drain assembly with a decorative cover, a kitchen towel, mounting hardware, and a cutout template.
The maker describes NoiseDefend sound dampening pads that cover 80 percent of the sink base, a sloped bottom with channel grooves, and rounded corners. The right and rear drain placement moves plumbing to one side of the cabinet. On granite, a compact steel bowl keeps the cutout small, which leaves more stone surface on a short run and reduces the span the slab bridges.
- Pros: fits a 30 inch minimum cabinet, the smallest in this group
- Pros: bottom grid and drain assembly included
- Pros: 16 gauge steel, per the maker
- Cons: basket strainer not listed as included
- Cons: single basin only, at a compact 27 inch length
Buy if your cabinet is near 30 inches and you want a grid included with a single deep bowl. Skip if you need two bowls or a longer basin for sheet pans washed flat.
Kraus Standart PRO KHU103-32 double basin steel sink
This sink suits a cook who wants a large main bowl for washing and a smaller second bowl for rinsing or produce. The maker lists an undermount fit and a 60/40 basin split in stainless steel. Two protective bottom grids come in the kit, along with two drain assemblies fitted with decorative covers.
The outside size is 32 inches long by 19 inches wide, with a height of 10 inches. The left basin measures 17-7/8 inches by 17 inches by 10 inches deep, and the right basin measures 11-7/8 inches by 17 inches by 10 inches deep. The listing page states a minimum cabinet size of 36 inches, a drain connection of 3-1/2 inches, a gauge of 16, and a product weight of 29.81 lbs.
The maker describes NoiseDefend pads covering 80 percent of the sink base, channel grooves in the sloped bottom, and rounded corners. Center and rear drain placement is listed. Under granite, the 60/40 layout keeps the main bowl close to the size of a mid-range single bowl, so large pans still fit on the left side while the right side handles glasses and cutlery.
- Pros: 60/40 split keeps a large main basin
- Pros: two bottom grids and two drain assemblies included
- Pros: 16 gauge steel, per the listing page
- Cons: needs a 36 inch minimum cabinet
- Cons: smaller right bowl limits soaking space on that side
Buy if you wash large pans often but still want a second bowl for rinsing. Skip if you prefer two matched bowls for hand washing in equal amounts on both sides.
Kraus Standart PRO KHU104-33 double basin steel sink
This sink suits a layout where the larger bowl belongs on the right, for example when the dishwasher sits to the right of the sink. The maker lists 16 gauge stainless steel in grade 304, an undermount fit, and a 40/60 basin split. Two bottom grids and two drain assemblies come in the kit, per the listing page.
The outside size is 32-3/4 inches long by 19 inches wide, with a height of 10 inches. The left basin measures 12-7/8 inches by 17 inches by 10 inches deep, and the right basin measures 16-7/8 inches by 17 inches by 10 inches deep. The listing page states a minimum cabinet size of 36 inches, a drain connection of 3-1/2 inches, and a product weight of 55 lbs, the highest figure in this group.
The maker describes NoiseDefend pads covering 80 percent of the sink base and a rear drain location. That listed weight matters on granite: confirm the support plan with your fabricator, since the bowl, a full load of water, and the stone all bear on the cabinet. The reversed split is the reason to pick this model over the KHU103-32, so choose by which side you work from.
- Pros: larger bowl on the right suits right side dishwashers
- Pros: two bottom grids and strainers included
- Pros: 16 gauge grade 304 steel, per the maker
- Cons: listed weight of 55 lbs needs a firm support plan
- Cons: needs a 36 inch minimum cabinet
Buy if your workflow runs right to left toward the dishwasher and you want the big bowl on the right. Skip if your cabinet or support setup is light, given the listed weight.
Blanco Precis Super Single Silgranit sink 441478
This sink suits a busy household that washes baking sheets, pots, and pans in one open bowl. The listing page describes the Precis Super Single as an extra large single bowl undermount sink in Silgranit, a patented granite composite material. The finish listed for this model is Cinder, and the bowl has no faucet holes.
The outside size is 32 inches wide by 19 inches long front to back, with a height of 9.5 inches. The inside bowl measures 30 inches by 17 inches by 9.5 inches deep. The listing page states a minimum cabinet size of 36 inches, a rear center drain placement, an item weight of 33 lbs, and a cut-out of 30.25 inches by 17.25 inches. A basket strainer and installation clips are listed as sold separately, and a grid is listed as an optional accessory.
The maker describes Silgranit as resistant to heat, scratches, stains, chips, and impact, with a non-porous surface. A single 30 inch bowl takes a sheet pan flat, which no divided sink in this group can match. Against granite, the Cinder tone sits between black and gray stone, and the matte surface shows fewer water marks than a polished steel bowl.
- Pros: 30 x 17 inch single bowl fits sheet pans flat
- Pros: Silgranit granite composite with color through the body
- Pros: rear center drain frees cabinet space below
- Cons: basket strainer and clips sold separately
- Cons: needs a 36 inch minimum cabinet
Buy if one large bowl matches how you cook and you accept buying the strainer and clips apart. Skip if you want two bowls or a kit with the strainer in the box.
Blanco Performa Silgranit double bowl sink 440069
This sink suits hand washers who want two deep, equal bowls in a composite body. The listing page describes the Performa as a 50/50 equal double bowl undermount sink in Silgranit granite composite, finished in Anthracite. It is the deepest Blanco bowl in this group, and it lists no faucet holes.
The outside size is 33 inches wide by 20 inches long front to back, with a height of 10 inches. Each inside bowl measures 15 inches by 18 inches by 10 inches deep. The listing page states a minimum cabinet size of 36 inches, a rear center drain placement, an item weight of 38 lbs, and a cut-out of 31.25 inches by 18.25 inches. A basket strainer and installation clips are listed as sold separately, with grids and a cutting board as optional accessories.
The maker describes Silgranit as resistant to heat, scratches, stains, chips, and impact, with a non-porous, easy to clean surface. The 20 inch front to back depth gives more bowl room than the 19 inch models, at the cost of counter depth. On granite, equal deep bowls suit a soak and wash routine, and the Anthracite tone pairs with both dark and mid-tone stone.
- Pros: two equal bowls at 10 inches deep
- Pros: Silgranit granite composite body
- Pros: deeper front to back bowl space than most models here
- Cons: basket strainer and clips sold separately
- Cons: 20 inch width needs a deep counter
Buy if you hand wash in two stages and want composite bowls at full depth. Skip if your counter is shallow or you want the strainer and clips included in the purchase.
Buying guide
Granite is cut and polished off site in most projects, so errors in sink size or template choice are hard to undo. Work through cabinet size, support, bowl layout, and material in that order. Each step below uses the spec lines that the maker and listing pages in this guide actually state for these six sinks.
Sizing undermount kitchen sinks for granite countertops by cabinet
Minimum cabinet size is the first filter, because the bowl hangs inside the cabinet box under the stone. In this group the stated minimums are 30 inches for the Kraus KHU110-27 and 36 inches for the other five sinks. Measure the inside width of the base cabinet before the template goes to the fabricator.
Counter depth is the second filter. The Quarza and the Blanco Performa measure 22 inches and 20 inches front to back, while the steel Kraus models measure 19 inches. On a standard depth counter, a wider sink pushes the faucet line closer to the backsplash, so check the room left behind the cutout for the faucet body you plan to use.
Planning support under granite
An undermount bowl hangs from the stone and the cabinet, and granite projects often add a support frame or rails inside the cabinet. The listing pages state product weights your fabricator can work from: 23 lbs for the Kraus KHU110-27, 29.81 lbs for the KHU103-32, 33 lbs for the Blanco Super Single, and 55 lbs for the KHU104-33.
Water adds load on top of the bowl weight, and a double bowl filled for soaking is the heaviest case. Tell the fabricator which model you picked and whether a garbage disposal will hang from the drain, since that weight also bears on the bowl and its mounting clips.
Composite or steel under granite
Composite bowls read as stone and carry color through the body. The Blanco pages describe Silgranit as resistant to heat, scratches, stains, chips, and impact, and the Kraus Quarza page describes a granite composite made from 80 percent natural quartz. A matte bowl next to polished granite gives a clear texture contrast.
Steel bowls are thinner, and the Kraus models here include bottom grids that keep dishes off the bowl surface. Steel matches appliances and is the lighter option at the compact end of the range. Pick composite for a stone look and a quieter bowl, and steel for a grid included in the box and a metal finish that matches the rest of the kitchen.
Picking a bowl split that fits your routine
Split ratios change how the sink works more than outside size does. A 60/40 split, as on the Kraus Quarza and the KHU103-32, keeps one basin large enough for pans and leaves a smaller basin for rinsing. A 40/60 split, as on the KHU104-33, mirrors that layout for a right handed workflow or a dishwasher placed on the right.
Equal 50/50 bowls, as on the Blanco Performa, suit a wash and rinse routine with matched loads. A single bowl, as on the Blanco Precis Super Single and the Kraus KHU110-27, gives one open space for the largest items. Choose by the largest item you wash weekly and by whether you soak and rinse at the same time.
Checking what is sold separately
The Blanco sinks here list the basket strainer and clips as sold separately, with grids as optional accessories. The Kraus steel sinks list grids and drain assemblies in the kit, and the Quarza lists mounting hardware as included. Read the included lines for the exact model before you book the install.
Drain placement also affects the cabinet below. Rear and rear center drains, listed on most models here, move the trap and disposal toward the back, which can free the front of the cabinet for bins or pull-out storage. Center drains suit existing plumbing that already lands in the middle of the cabinet.
FAQ
Most questions about pairing a sink with granite come down to the cutout, support, and the order of work on install day. The answers below stay with what the maker and listing pages state about these six sinks, plus general points about undermount installs that apply to any granite counter project you plan with a fabricator.
Is granite strong enough for an undermount sink?
Granite is a common pairing for undermount sinks, and all six sinks here are listed as undermount models. The practical limits are cabinet size, support under the bowl, and the stone span around the cutout. Your fabricator works from the maker template and the stated product weight on the listing pages.
Tell the fabricator the exact model before cutting. Templates differ between models that look alike, such as the three Kraus double bowl sinks in this group.
How do undermount kitchen sinks for granite countertops differ from quartz pairings?
The sinks themselves are the same undermount products; the difference is the counter work. Granite is cut and polished as a natural stone slab, so edge finish at the cutout and support planning get more attention. The spec checks stay the same: cabinet size, dimensions, bowl depth, and drain placement.
Color pairing also shifts. Granite has natural veining and movement, so a matte composite bowl in a flat tone, such as Cinder or Anthracite, gives a calm field next to a busy stone pattern.
When is the sink installed during a granite project?
In most projects the bowl is mounted to the underside of the slab as part of the counter install, then plumbing connects after the stone is set. That order means the sink, clips, and any support frame need to be on site before install day. The Blanco models list clips as sold separately, so order them with the sink rather than after it.
Keep the cut-out template with the sink until the fabricator confirms it. Several listings here include a template in the kit, and the fabricator may still cut from a digital file for the same model.
Can a garbage disposal fit these sinks?
The Kraus listings state drain connections of 3-1/2 inches, and the Quarza page describes its rear-set drain as compatible with garbage disposal adapters. The Blanco pages do not state a drain connection size on the pages read here, so confirm the fitting on the maker page for the exact model before ordering.
A disposal adds hanging weight under the bowl. Include it in the support talk with your fabricator, along with the stated product weight of the sink.
What if my cabinet is 33 inches?
Of the six sinks here, only the Kraus KHU110-27 states a minimum cabinet size below 36 inches, at 30 inches. A 33 inch cabinet meets that stated minimum, so the KHU110-27 is the fit in this group. The other five state 36 inches, so they do not fit a 33 inch cabinet as listed by their makers.
If you want a double bowl in a 33 inch cabinet, look at smaller double bowl families rather than forcing a 36 inch model into a smaller box, since the bowl walls and clips need the room the maker states.
Conclusion
For granite counters, fit and support come before finish. The Kraus KHU110-27 suits smaller cabinets, the Kraus Quarza and KHU103-32 cover two bowl washing in composite and steel, and the Blanco Performa gives the deepest equal composite bowls in this group of six undermount sinks for stone counters.