Updated Nov 16, 2026· 16 min read

Key takeaways

  • Six controller upgrades for Ortech controlled grills compared on temperature range, setpoints, P settings, probe support and stated compatibility by model.

Many pellet grills ship with a controller their maker bought in, and Ortech is the supplier behind a long list of them. This guide compares six options for an upgrade for ortech controlled grills, from Ortech’s own digital controller to PID boards, judged on stated compatibility, temperature range and control settings.

Quick verdict

The Smoke Daddy Pellet Pro is the broadest upgrade here: a PID controller whose maker names Traeger, Pit Boss and Camp Chef as compatible, with an RTD probe in the box. The Ortech RealTemp TR-100 is the factory-pattern route, the same style of controller these grills were built with, in a two-screw mount.

The Tempco TEC95040 is the documented middle path, with a manual that names Traeger, Royall, BLAZ’N and IPT as its fitments. The Savannah Stoker is the precision pick, a PID board with 1 degree setting steps. The Upgraded PID Pro and the Saycker board are Traeger-focused replacements with narrower, model-specific fitments.

Compatibility is the whole decision. These boards share connectors and control logic with the Ortech-pattern controllers fitted to many Traeger, Brinkmann and IPT grills, but each maker states its own fitment list, and the lists do not all match. Buy against the stated list for your grill, not against the plug shape.

Product Control type Best for Key spec Main limit
Ortech RealTemp TR-100 Digital Controller Dial setpoints with P settings Factory-pattern replacement Settings from Smoke to High, P0 to P15 No food probes
Tempco TEC95040 Digital Wood Pellet BBQ Grill Controller Digital setpoints Documented fitments 9 setpoints, 180 to 450 degrees F Manual revision is dated 2012
Smoke Daddy Pellet Pro PID Controller PID autotuning Widest stated compatibility 160 to 450 degrees F, plus 100 to 145 program Mounting hole must be 2-5/8 in wide or more
Savannah Stoker PID with 3-phase program Fine temperature control 1 degree steps, 150 to 500 degrees F Adapters often required, not all models
Upgraded PID Pro Controller PID, 3 size programs Named Traeger models Replaces BAC365 and BAC236 parts Brand not stated in its manual
Saycker Digital Thermostat Controller Board Dial setpoints Simple Traeger swap Five setpoints plus Smoke and High No PID program

How we selected

Selection started from what Ortech is. A pellet grill review reference states that rather than design their own digital controllers, some grill makers buy them from a company named Ortech, and that an Ortech controller can be used to upgrade Brinkmann and Traeger controllers. That OEM pattern is the fitment logic behind this keyword.

Each board below qualified only where an opened page states its compatibility: a manual naming host brands, a maker page naming compatible brands, or a documented replacement for a named controller part. Boards with no stated fitment were left out, and no board is described as fitting a grill its own page does not name.

One caution runs through the list. Naming a host brand is not the same as naming every model in that brand’s line, and two makers here say so in their own words, with exclusions and adapter notes. The entries repeat those limits exactly as stated, because a controller that fits most of a brand’s grills can still miss yours.

Specs are quoted from manuals and maker pages: setpoint lists, P setting ranges, auger timing in seconds, temperature ranges in degrees F, mounting dimensions and probe support. Where a figure comes from a review page rather than the maker, the entry says so.

Upgrade for ortech controlled grills in detail

Six controllers follow, ordered from the factory pattern outward: Ortech’s own unit, a documented digital replacement, two PID upgrades with different fitment styles, and two Traeger-focused boards. Each entry covers the stated compatibility first, then the control settings and the limits its own documentation admits.

Ortech RealTemp TR-100 Digital Controller

The TR-100 is the controller at the center of this keyword: the digital unit Ortech supplies to grill makers, and the pattern that the other boards in this guide replace or imitate. Its Cook Control offers Off, Smoke, then 180, 225, 250, 275, 300, 325, 350 and 375 degrees F, and High. It mounts with two screws.

Smoke adjustment is separate. A Smoke Control Knob carries P settings from P0 to P15, which set the auger pause in smoke mode: the auger runs 15 seconds, then stays off from 45 seconds at P0 up to 165 seconds at P15. Ortech recommends P2 as the default idle rate in cook mode, the setting the other boards in this guide also tend to mirror.

One grill maker using this controller states that Smoke runs about 160 degrees F and High about 525 degrees F, which frames the working range of the dial. The honest limits are control depth and feedback: the TR-100 has no food probes, so there is no meat temperature readout, and temperature holding depends on the dial and P setting rather than a PID program.

As an upgrade, the TR-100 suits a grill whose original basic controller has failed or whose owner wants the factory control pattern with the full P range. Owners chasing tighter temperature holding should look at the PID boards below instead; this unit’s value is that it is the known quantity the grill was designed around.

  • Pro: The factory Ortech pattern, with the full P0 to P15 smoke range
  • Pro: Simple two-screw mounting
  • Con: No food probes and no PID program
  • Buy if: you want the original control pattern restored or kept
  • Skip if: temperature swing is the problem you are solving

Tempco TEC95040 Digital Wood Pellet BBQ Grill Controller

The TEC95040 is a digital replacement whose manual does the compatibility work. The manual states it is compatible with Traeger Company, Royall, BLAZ’N and IPT Sink grills, and describes it as a replacement or upgrade for an existing control. The IPT name matters here, because IPT is one of the grill brands built around an Ortech controller.

Control is by nine setpoints from 180 to 450 degrees F on a large 3-digit display. A smoke setting carries an adjustable pellet feed rate through a selector switch on the board, positions 0 to 5: the auger runs 15 seconds, then pauses 45, 55, 65, 75, 85 or 95 seconds by position. The factory default is position 2, and the manual recommends not going over position 5.

An automatic pellet ignition cycle runs the ignitor and then switches it off after four minutes. The board runs on 120VAC and is fused at 3A, 250VAC, with a spare fuse attached. The manual also recommends replacing the RTD sensor when a digital controller is replaced, a step worth planning into the job rather than discovering afterward.

The limit is documentation age: the manual revision is from 2012, so the model list reflects that era’s grills. Owners of current host models should confirm the board is still sold and still specified for their grill before ordering. Within its stated list, though, this is the most plainly documented fitment in the guide.

  • Pro: Manual names four compatible grill brands in writing
  • Pro: Adjustable smoke feed rate with six selector positions
  • Con: Manual revision dates to 2012; current sale status needs confirming
  • Buy if: your grill is a Traeger, Royall, BLAZ’N or IPT of that pattern
  • Skip if: you want probe support or a PID program

Smoke Daddy Pellet Pro PID Controller

The Pellet Pro is sold as a complete pellet grill upgrade kit built around a PID controller with autotuning. The maker states that RTD relay feedback every 4 seconds adjusts the auger feed rate and fan speed to hold the set temperature within 5 to 10 degrees. That feedback loop is the functional jump from the dial controllers above.

The standard range is 160 to 450 degrees F, and a Sportsman Program adds a lower band of 100 to 145 degrees F for cold-weather and low-temperature work. The maker states compatibility with most pellet grill brands and names Traeger, Pit Boss and Camp Chef. The same page names the exclusions: it is not compatible with Green Mountain Grills, Louisiana, Yoder or tailgating style grills.

Fitting is the planning point. The controller mounts vertically and the mounting hole must be at least 2-5/8 inches wide; optional hardware covers grills whose controllers mount horizontally. An RTD probe is included in the kit, and the maker notes the probe hole may need opening up on some grills to pass the sensor.

For an Ortech-pattern grill whose owner wants PID holding without changing brands of grill, this is the widest stated net in the guide. The discipline is to read the exclusion list as carefully as the compatibility list, and to measure the mounting hole before ordering, since the 2-5/8 inch minimum is a hard physical limit.

  • Pro: PID autotuning with feedback every 4 seconds, per the maker
  • Pro: RTD probe included; low 100 to 145 degrees F program included
  • Con: Named exclusions include Green Mountain Grills, Louisiana and Yoder
  • Buy if: your grill is on the stated compatible list and the hole measures up
  • Skip if: your controller mounts in a hole under 2-5/8 inches wide

Savannah Stoker

The Savannah Stoker, from Sound Solutions, LLC, is a PID controller built as a replacement for Traeger wood pellet grills, with one stated exception: it does not fit the Traeger PTG. Beyond Traeger, published documentation lists it as adaptable to Smokin Brothers, Smoke Daddy, Pit Boss, Camp Chef, Royal Wood (Royall) and Blaz’n Grill Works grills.

Adapters are part of that sentence. The documentation states adapters are often required for the non-Traeger fits and that not all models are covered, with the manufacturer as the check point. The newest version includes a grill temperature sensor and a meat probe, which moves it past the probe-free dial boards in this guide.

Setting resolution is its calling card: 1 degree F increments across a grilling range of 150 to 500 degrees F. A published review reports typical swing of about 5 degrees while grilling, sometimes 10, and nearer 15 while smoking. A 3-phase program runs smoke, hold and cook stages, and the controller relights the fire automatically if it goes out.

The flag on this pick is availability: the review literature notes the Stoker has historically been difficult to get hold of. Treat it as the precision option when it can actually be ordered, and confirm stock with the maker rather than assuming a listing means a unit is ready to ship.

  • Pro: 1 degree setting steps from 150 to 500 degrees F
  • Pro: Meat probe and grill sensor included in the newest version
  • Con: Adapters often required beyond Traeger; not all models covered
  • Buy if: fine temperature steps and a staged program matter most
  • Skip if: you need a controller shipped this week, every week

Upgraded PID Pro Controller

This board is documented as a replacement for the BAC365 and BAC236 controllers, and its manual lists the Traeger models it fits: Pro 20, Pro 22 and Pro 34, Texas Elite 34, Lil Tex 22, Junior Elite 20, Ridgeland, Heartland, Mesa 22, Century 22 and 34, Silverton (2019) and Bronson 20. That model list is the compatibility statement to buy against.

The maker’s wording describes the approach plainly: they retrofit the OEM controller by adding PID programs. Smoke mode runs 180 to 200 degrees F with P settings from P0 to P9, feeding 15 seconds and pausing 45 to 150 seconds, with P2 as the factory default. Cook mode offers nine temperature options from 225 to 450 degrees F.

Three PID programs are matched to cooking surface: Pr0 for grills over 650 square inches, set as the default, Pr1 for 450 to 650 square inches, and Pr2 for under 450 square inches. The board supports a grill probe and a meat probe, offers readout temperature compensation from minus 200 to plus 200, and switches between degrees C and F on the board.

Shutdown behavior is documented too: the fan runs 10 more minutes after shutdown, with a cool-down of about 15 minutes, and the display shows ErH above 550 degrees F. The open flag is branding: the manual does not state a consumer brand for the board, so the listing it is bought from carries the identity, and that is worth confirming before purchase.

  • Pro: Named replacement for BAC365 and BAC236 with a model list
  • Pro: Three PID programs sized to the grill’s cooking surface
  • Con: Consumer brand not stated in the manual
  • Buy if: your Traeger model is on the stated list and runs a BAC365 or BAC236
  • Skip if: your grill is outside the named Traeger models

Saycker Digital Thermostat Controller Board

The Saycker board, model 627666911008, is a digital thermostat controller for Traeger wood pellet smoker grills, built around a rotary knob and an ON/OFF switch with an LED display. Its settings are 180, 225, 275, 325 and 375 degrees F, plus Smoke and High modes. It is the simplest control layout in this guide.

The board runs on AC 120V, 60Hz input. The housing is ABS, and the published dimensions are 7.09 by 3.54 by 0.71 inches, at 8.1 ounces. Wiring is color-coded by function: purple for the ignition rod, orange for the fan, red for the motor, black for power L and white for N, which maps the swap onto the grill’s existing harness.

A shutdown cycle with fan run-on is built in, so the fan keeps moving air after the cook ends rather than stopping with the auger. That behavior matches the shutdown pattern of the PID Pro above and is the kind of detail that separates a considered replacement board from a bare thermostat.

The limits are scope and depth: the stated fitment is Traeger pellet grills, with no model list published on the page, and there is no PID program and no stated probe support. It suits an owner replacing a failed dial controller like for like. Owners wanting tighter holding or a meat probe should step up to the Pellet Pro or the Savannah Stoker.

  • Pro: Color-coded wiring by function for a direct swap
  • Pro: Shutdown cycle with fan run-on built in
  • Con: No model list, no PID program, no stated probe support
  • Buy if: a Traeger dial controller has failed and you want the same layout
  • Skip if: you are upgrading for temperature accuracy

Buying guide

A controller swap is an electrical and mechanical fit before it is a features purchase. The boards in this guide differ in mounting, orientation, sensor needs and control logic, and a grill accepts only the boards that match all four. Work through the checks below in order and the right board usually picks itself.

What to check before buying an upgrade for ortech controlled grills

Start with the stated fitment list, not the connector. The Tempco manual names Traeger, Royall, BLAZ’N and IPT; the Pellet Pro names Traeger, Pit Boss and Camp Chef with exclusions; the PID Pro names thirteen Traeger models. If your grill is not named by the board’s own documentation, the board is not verified for it.

Then confirm what your grill shipped with. Grills built around an Ortech-supplied controller, including many Traeger and Brinkmann models and the IPT line, follow the control pattern these boards are written for. A grill with a maker’s own proprietary controller may share a plug shape and still run different logic, which is where mismatches begin.

Mounting hole and orientation come first

Controllers mount in a cutout, and the cutouts differ. The Pellet Pro needs a mounting hole at least 2-5/8 inches wide and mounts vertically, with optional hardware for horizontal layouts. The TR-100 mounts with two screws in the factory pattern. Measure your grill’s cutout and note its orientation before comparing features.

Panel space matters beyond the hole. The Saycker board measures 7.09 by 3.54 by 0.71 inches, a long shallow unit that needs flat panel room around its cutout. A board that fits the hole but crowds the panel, the hopper wall or the existing wiring loom will fight you through the whole install.

Dial setpoints or PID control

Dial-pattern boards, the TR-100 and the Saycker, offer fixed setpoints and a P setting that adjusts the auger pause in smoke mode. They are simple, predictable and close to what the grill shipped with. Temperature holding depends on the fixed timing logic, so swings follow the weather and the pellet load.

PID boards close the loop. The Pellet Pro reads its RTD every 4 seconds and adjusts auger and fan to hold within 5 to 10 degrees by the maker’s statement. The PID Pro adds programs sized to the cooking surface, and the Savannah Stoker adds 1 degree steps and a staged smoke, hold and cook program. Pay for PID when holding accuracy is the complaint.

Probes, sensors and the RTD swap

Probe support splits this guide cleanly. The TR-100 has no food probes. The Pellet Pro includes an RTD probe, the Savannah Stoker’s newest version includes a grill sensor and a meat probe, and the PID Pro supports a grill probe and a meat probe. If you cook to internal temperature, the probe question decides the shortlist.

Plan the sensor swap with the board swap. The Tempco manual recommends replacing the RTD sensor when the digital controller is replaced, and the Pellet Pro’s maker notes the probe hole may need opening up. Allow time for the sensor work; a new board reading through a tired sensor inherits the old board’s errors.

Power, fuses and shutdown cycles

These boards run on household power: the Tempco is specified at 120VAC with a 3A, 250VAC fuse and a spare attached, and the Saycker takes AC 120V at 60Hz. Confirm the grill’s cord and outlet match before assuming a board fault is a board fault; a blown fuse on a documented board is a replaceable part, not a replacement board.

Shutdown behavior is a real feature. The PID Pro runs its fan for 10 more minutes after shutdown with about 15 minutes of cool-down, and the Saycker runs a shutdown cycle with fan run-on. Boards that cool the firebox down in an orderly cycle leave less unburned fuel and ash smoldering in the auger tube between cooks.

FAQ

Most controller questions are really fitment questions: which grills these boards are documented for, what the settings change, and what else has to be swapped with the board. The answers below stay inside what the manuals and maker pages state, including where the documentation stops.

Is a PID board the best upgrade for ortech controlled grills?

For temperature holding, yes, on the documented evidence. The Pellet Pro’s maker describes feedback every 4 seconds holding the set point within 5 to 10 degrees, and a published review of the Savannah Stoker reports typical swings of about 5 degrees while grilling. Dial boards make no comparable holding claim in their documentation.

For a straightforward failure replacement, a PID board can be more than the job needs. If the original dial controller failed and the grill cooked well on it, the TR-100 pattern or the Saycker board restores the known setup. The upgrade question is whether holding accuracy, probes or staged programs are worth changing control systems for.

How do I know my grill has an Ortech controller?

The clearest evidence is the control pattern. Ortech-supplied controllers follow the pattern documented for the TR-100: a Cook Control with Smoke and numbered setpoints, and a Smoke Control with P settings. A published reference names Traeger and Brinkmann as brands whose controllers an Ortech unit can upgrade, and IPT as a brand built around one.

Where the pattern is unclear, buy against the replacement board’s stated list instead of the badge on the grill. The Tempco and PID Pro documentation name their host brands and models in writing. A board whose own manual names your grill is a verified fit; a board that merely looks similar is a guess.

What does the P setting actually change?

The P setting changes the auger pause between pellet feeds in smoke mode. On the TR-100, the auger runs 15 seconds and then pauses from 45 seconds at P0 to 165 seconds at P15. A longer pause feeds less fuel, which runs cooler and smokier; a shorter pause feeds more and runs hotter with less smoke dwell.

The same logic appears across this guide with different ranges. The Tempco’s board selector offers six positions with pauses of 45 to 95 seconds, and the PID Pro’s smoke mode runs P0 to P9 with pauses of 45 to 150 seconds. All three document P2 or position 2 as the factory default, which is the sensible starting point before adjusting.

Do I need to replace the temperature sensor too?

One maker says so directly: the Tempco manual recommends replacing the RTD sensor when a digital controller is replaced. The logic is sound beyond that brand, because the new board can only act on what the sensor reports, and an aged sensor drifts. The Pellet Pro kit includes its RTD probe, which removes the question for that board.

Allow for the physical work as well. Smoke Daddy notes the probe hole may need opening up to pass its sensor, and any sensor swap means routing cable through the grill body. Neither job is large, but both are easier planned than improvised with the grill already apart.

Conclusion

For most Ortech-pattern grills, the Smoke Daddy Pellet Pro is the upgrade to buy: PID holding, an included RTD probe and the widest stated compatibility. Traeger owners with a BAC365 or BAC236 shortlist the PID Pro, precision cooks the Savannah Stoker, and anyone restoring the factory pattern the Ortech TR-100. Match the fitment list first.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.