Key takeaways
- Compare five small coffee makers with grinder systems built in, with widths, depths, hopper sizes and brew unit cleaning steps stated by their makers here.
Small and grind-and-brew rarely meet, because a grinder, a hopper and a brew unit all take room, so this guide compares five best small coffee makers with grinder models whose makers state both the grinder and the dimensions on the page: one single-serve drip machine and four compact bean-to-cup espresso machines.
What small means for coffee makers with grinder systems
Small has to be measured, not felt, so every machine in this guide earned its place with numbers: the widest is 10 inches across, the narrowest 7.28 inches, and each maker’s page states the full footprint next to the built-in grinder, which is the pairing this keyword actually asks for.
The honest complication is depth. Bean-to-cup machines put the brew unit behind the spouts, so the four espresso models here run 17 to 17.9 inches deep even though their widths stay slim. They are small from the front, where counter runs are measured in a galley kitchen, and full sized front to back. The one drip machine, the Cuisinart DGB-2, is the only true all-round compact at 11.02 inches deep.
Capacity shrinks with the body, and the pages show where. Bean containers run from about 100 g on the DGB-2 and 125 g on the JURA A1 and the Melitta to 8.8 oz on the De’Longhi and the Gaggia, and water tanks from 37 oz on the JURA to 60 oz on the De’Longhi. A small grinder machine refills more often; that is the trade, stated plainly.
What does not shrink is the drink. All five grind fresh for each brew, four of them brew espresso under pressure with adjustable grind settings, and three carry a steam wand or Panarello for milk. The DGB-2 gives up the carafe instead, brewing single servings of drip coffee from beans, grounds or pods.
Grind adjustment survives the shrinking too, though the ranges differ widely. The Magnifica XS offers 13 settings, the Brera 5 and the Melitta 3 fineness levels, while the JURA grinds to its AromaG3 pattern with strength chosen on the panel and the DGB-2 grinds for drip without a fineness dial in its manual’s description. Two of the dials, on the Gaggia and the Melitta, may only be turned while the grinder is running, a rule both manuals state in bold terms.
Pre-ground coffee divides the five as well. The Magnifica XS takes one level scoop through its ground coffee funnel, the Brera takes one scoop through its bypass doser, and the JURA’s specification lists ground coffee among its inputs, while the Melitta’s bean container is for whole beans only and the DGB-2 takes grounds directly in its filter cup. A household that drinks decaf after dinner should weigh that bypass as seriously as the footprint.
Cleaning also stays full sized. Bean-to-cup machines have a brew unit that slides out for rinsing and a grounds container that fills puck by puck, and the manuals schedule both jobs. The sections below give each machine’s routine with its dimensions, so the small print is literal here.
The five small coffee makers with grinder footprints compared
The table lines up the stated footprints and grinder facts for the five machines: width, depth and height as the makers give them, the grinder type and settings, and the bean container size, so the trade between width and depth is visible at a glance.
| Machine | Dimensions (D x W x H) | Grinder | Bean container | Water tank |
|---|---|---|---|---|
| Cuisinart DGB-2 | 11.02 x 7.28 x 12.67 in | Conical burr | About 100 g | 48 oz |
| Melitta Solo & Milk | 17.9 x 7.9 x 12.8 in | Built-in, 3 fineness levels | 125 g | 1.2 L |
| JURA A1 | 445 x 239 x 323 mm | AromaG3 conical burr | 125 g (4.4 oz) | 1.1 L (37 oz) |
| De’Longhi Magnifica XS | 17 x 9.4 x 13.8 in | Conical burr, 13 settings | Hopper on top | 1.8 L (60 oz) |
| Gaggia Brera | 17.5 x 10 x 12.4 in | Ceramic burr, 5 settings | 8.8 oz | 40 fl oz |
Read the width column first if your counter run is short and the depth column first if your machine must slide under wall cabinets or a shelf. The JURA figures are given in millimeters because its manual specification table states them that way; they convert to about 9.4 inches wide, 17.5 deep and 12.7 high.
Cuisinart DGB-2
The DGB-2 is the only drip brewer here and the smallest in every direction: 11.02 inches deep, 7.28 inches wide and 12.67 inches high, with a conical burr grinder and a sealed hopper of about 100 g grinding straight into its reusable filter cup every morning.
It brews single servings of 8, 10 or 12 oz, and the same chamber takes single-serve pods and pre-ground coffee, so the grinder is an option per cup rather than a commitment. The removable reservoir holds 48 oz, the drip tray lifts out for taller travel mugs, and a charcoal water filter sits in the tank. For a one or two person household that drinks drip coffee, this is the footprint the keyword promises.
The limits follow from the size. There is no carafe, no espresso and no milk system, and the hopper holds days of beans rather than weeks. Descaling runs every 3 to 6 months with one third white vinegar to two thirds water. One caution from the manual page: its specification table lists a weight of 1 pound, an obvious data error, so that figure is left out here.
Day to day, the filter cup and drip tray wash in warm soapy water and the reservoir wipes out with a damp cloth. The manual’s troubleshooting names the grinder’s weak points honestly: an empty hopper and a clogged grinder chute are its listed causes when the grinder stops, with cleaning the chute as the fix, and a reservoir that is not seated firmly is its listed cause for leaks. Both are one-minute jobs, in keeping with the machine’s size.
Choose the DGB-2 if small means small in depth as well as width and your drink is a mug of drip coffee ground fresh. It is also the natural pick where counter depth is the binding constraint, such as a shallow shelf or a narrow breakfast bar.
Melitta Solo & Milk E953-102
The Solo & Milk is the narrowest bean-to-cup machine here at 20 cm, 7.9 inches, wide: the manual page calls it compact, and its built-in grinder offers 3 fineness levels on a dial inside the 125 g bean container, adjusted only while the grinder is running.
It brews one or two cups at once after a pre-infusion step, with a strength dial for intensity and a height-adjustable spout. The Panarello steam wand froths milk for cappuccinos and latte macchiatos and also dispenses hot water. The water tank holds 1.2 liters and mounts on the side, which suits a machine pushed against a wall on a narrow counter.
The brewing unit removes for a rinse under warm running water on a weekly rhythm, and the drip tray and grounds container empty daily. A descaling indicator and an integrated program handle scale with Melitta-approved agents, and the manual notes that with a Pro Aqua filter cartridge changed about every 2 months, descaling may drop to once a year.
The body runs 45.5 cm deep and 32.5 cm high and weighs 8.1 kg. One flag: the opened manual page covers the 240 volt variant, so confirm the figures for your region’s model on the maker’s current page. Pick the Solo & Milk for the slimmest front profile with a milk wand included.
JURA A1
The A1 is JURA’s compact pattern: 239 mm wide, 445 mm deep and 323 mm high, weighing 9200 g, with the AromaG3 conical burr grinder and the Pulse Extraction Process brewing ristretto, espresso and coffee at one touch for a one or two person household kitchen.
Everything is sized for one or two drinkers. The bean container holds 125 g under an aroma preservation cover, the side water tank holds 1.1 liters, and the spout adjusts for cups from 2.3 to 5.5 inches. Two coffee strength levels are offered, and there is deliberately no milk system and no hot water function on this model, which is part of how it stays this size.
Maintenance is prompted rather than scheduled by you: the machine asks for a cleaning cycle after 180 preparations or 80 switch-on rinses, and the CLEARYL Blue filter is replaced as the display indicates or about every two months. The manual’s descaling guidance is monthly with hard water and quarterly with soft water, using a liquid descaling agent. The specification table also lists an energy saving mode and automatic power off, which suit a machine that sits idle between two morning drinks.
Two cautions. The summary page for this manual lists scrambled dimensions and a conflicting weight, so the figures above come from the manual’s own specification table instead. Voltage also differs by region and is omitted. Choose the A1 if black coffee and espresso are the whole menu and you want the smallest bean-to-cup body from this maker.
De’Longhi Magnifica XS ECAM22110S
The Magnifica XS states its brief in its introduction: a compact fully automatic machine, 9.4 inches wide, 17 inches deep and 13.8 inches high, with a conical burr grinder offering 13 adjustable settings, the widest grind range in this guide of the five.
A central dial sets coffee strength from extra-mild to extra-strong, 1-cup and 2-cup buttons run the brew, and a funnel takes one level scoop of pre-ground coffee for the decaf drinker in the house. The manual cappuccino system is a steam wand for milk, and the water tank is the largest here at 1.8 liters, 60 oz, so refills are the least frequent of the five.
The brew unit removes for rinsing, the grounds container empties when the machine prompts or at least daily, and the drip tray has a red float that rises when it needs emptying. Descaling is indicated by the machine and uses the maker’s descaler. At 22.5 pounds it is the heaviest here, a stay-in-place machine.
One flag: a sibling manual page for the B variant of this model lists its dimensions in a scrambled order, so confirm the exact variant’s figures on the maker’s current page before measuring your counter. Pick the Magnifica XS if you want the most grind settings and the biggest tank that still fits a 9.4 inch width.
Gaggia Brera
The Brera is the widest and shortest of the bean-to-cup four at 10 inches wide, 17.5 inches deep and 12.4 inches high: its ceramic burr grinder has 5 settings on a dial inside the 8.8 oz hopper, again adjusted only while the grinder is running, as its manual directs.
Its layout is built for small counters in a different way: the 40 fl oz water reservoir and the dreg box both pull out from the front, so the machine does not need side or top clearance for daily refills. A bypass doser takes one scoop of pre-ground coffee, the Pannarello wand froths milk, and the page states Rapid Steam reaches steam temperature in under ten seconds. Maximum cup height is 4.5 inches, the tightest here, so tall latte glasses are out.
The removable brew group rinses under lukewarm running water with no detergents, and the Gaggia Adapting System adjusts how the grinder operates as it learns your beans, in the maker’s description. Descaling runs when indicated or every 2 to 3 months with a Gaggia-approved solution.
One flag: another manual page for the Brera lists a different set of dimensions, and the maker’s service manual figures sit close to the ones used here except on depth, so verify against the current listing. Choose the Brera if front access matters more than width, and your cups are espresso cups and standard mugs.
Width is small, depth is not: reading the numbers
The pattern across the four bean-to-cup machines is consistent: widths of 7.9 to 10 inches wrapped around depths of 17 to 17.9 inches. That shape fits a narrow counter run between a wall and a stove in a small kitchen, and it fails a shallow shelf, so measure both directions before ordering.
Height decides the under-cabinet question. The Brera at 12.4 inches and the Melitta at 12.8 inches slide under most wall cabinets; the Magnifica XS at 13.8 inches is the one to measure twice. Remember that hoppers and tanks also need working clearance above or in front of those heights when you refill them.
The DGB-2 breaks the pattern because drip brewing needs no brew unit: at 11.02 inches deep it fits the spots the espresso machines cannot. If your space is a shallow nook rather than a narrow run, it is the only machine in this guide shaped for it.
Weight tracks the same split. The Melitta at 8.1 kg and the JURA at 9200 g can move for cleaning underneath; the Magnifica XS at 22.5 pounds is a park-it machine. Small kitchens often need the counter under the machine back, so the lighter two earn a point there.
Access is the hidden fourth dimension. The Brera pulls its water reservoir and dreg box out from the front, so it can sit between other appliances. The Melitta and the JURA mount their tanks on the side, needing a hand’s width of clearance on one flank. The DGB-2’s reservoir lifts off entirely for filling at the sink. A machine that fits the tape measure but cannot be refilled in place does not fit at all.
Brew unit cleaning on compact machines
Every bean-to-cup machine here hides a brew unit that presses each puck, and every manual makes rinsing it a standing job. The good news is that all four units slide out by hand and rinse under a tap, with no tools and no detergent on the Gaggia model.
- De’Longhi Magnifica XS: brew unit removes for rinsing; grounds container emptied when prompted or at least daily; drip tray shows a red float when full.
- Gaggia Brera: brew group out through the service door, rinsed under lukewarm water, air dried before reinserting; dreg box is front loaded.
- JURA A1: cleaning cycle prompted after 180 preparations or 80 switch-on rinses; CLEARYL Blue filter about every two months or as indicated.
- Melitta Solo & Milk: brewing unit rinsed weekly under warm water; integrated cleaning program for coffee oil residues; descaling program with an indicator light.
- Cuisinart DGB-2: no brew unit at all; the filter cup and drip tray wash in warm soapy water, and descaling is the only scheduled deep job.
The DGB-2’s absence from the brew unit routine is its quiet advantage: single-serve drip has no puck path to rinse. If the weekly brew unit rinse sounds like a chore you will skip, that difference should weigh as much as the footprint.
Matching small coffee makers with grinder designs to your kitchen
Start with the drink. Espresso and milk drinks point to the four bean-to-cup machines; drip coffee by the mug points to the DGB-2, which is also the only one that takes pods on the days the hopper is empty or the beans run out midweek. That ordering matters, because the wrong drink format cannot be fixed by a good footprint.
Then measure the space in three directions and match the shape, not just the area. A narrow, deep counter suits the Melitta or the JURA; a front-access spot with no side room suits the Brera; a shallow nook suits only the DGB-2.
Two-cup mornings split the bean-to-cup four. The Melitta brews one or two cups in a single cycle, the Magnifica XS has a dedicated 2-cup button, and the Brera offers a double cup button for a double espresso, while the JURA brews one cup at a time by design. In a two person household that leaves together, that difference is worth more than a grind setting.
Count the drinkers against the containers. The 125 g bean containers and 37 to 40 oz tanks on the JURA and Gaggia mean refills every few days for a couple; the De’Longhi’s 60 oz tank and larger hopper stretch that rhythm, at the cost of the heaviest body here.
Finally, picture the cleaning routine in your actual kitchen. Brew units rinse at the sink and air dry, grounds containers fill with pucks, and wands need a wipe after every milk drink on the De’Longhi and Melitta. A compact machine earns its counter space only if its routine fits the room it freed up.
Buying guide
For drip coffee in the least space, the Cuisinart DGB-2 is the clear pick: smallest in all three dimensions, fresh-ground or pod brewing, and no brew unit to maintain. Its 48 oz reservoir also means it is not a one-cup-then-refill machine, which keeps it practical for a two mug morning in a small household.
For espresso in a narrow run, choose between the Melitta Solo & Milk for the slimmest width and a milk wand, and the JURA A1 for black drinks only with prompted cleaning. Both hold 125 g of beans and about a liter of water.
For the fullest feature set in a compact body, the Magnifica XS brings 13 grind settings, a strength dial and the largest tank, while the Brera brings front loading and the lowest height. Your counter shape, not the feature list, should break that tie.
Verify the exact variant before ordering. Three of the five models here had conflicting dimension or weight figures across their own manual pages, each flagged in its section; the maker’s current product page for your region is the deciding source.
And keep the depth warning in front of you at checkout: four of these five machines are about 17 inches deep. If your counter cannot give them that, the DGB-2 is not a compromise, it is the correct answer.
Conclusion
For genuine all-round smallness, choose the Cuisinart DGB-2; for the narrowest bean-to-cup body with a milk wand, the Melitta Solo & Milk; for black drinks with prompted care, the JURA A1; for the most settings and the largest tank in a slim width, the De’Longhi Magnifica XS; and for front access in a low space, the Gaggia Brera.